DOI: 10.4028/www.scientific.net/kem.230-232.447. Problems with Wear in Artificial Orthopaedic Joint Replacements: a Review

Problems with Wear in Artificial Orthopaedic Joint Replacements: a Review

10.4028/www.scientific.net/kem.230-232.447

Crossref journal-article

Trans Tech Publications, Ltd.

Key Engineering Materials (2457)

Bibliography

Bolton, J. D. (2002). Problems with Wear in Artificial Orthopaedic Joint Replacements: a Review. Key Engineering Materials, 230â232, 447â454.

Authors 1

J.D. Bolton (first)

References 27 Referenced 5

D. Davis, Proc. Inst. Mech. Engrs. 181, (1967), p.25.
A Review of the UK research base in Biomaterials, Royal Acad. Engrs., London, (1998).
J.H. Dumbleton, Tribology of Natural Joints, Series 3, Elsevier, (1981), p.3.
M.J. Pappas, P.E. Frederick, M.D. Beuchal, Biomechanics and design rationale: New Jersey LCS knee replacement system, Depuy Int, (1993).
Corin Group Ltd, Cirencester, UK.
H.A. Amstutz, P. Grigoris, Clin. Ortho. & Related Research, 329s, (1996), p. S11. (10.1097/00003086-199608001-00003)
G. Lewis, Biomaterials, 22, (2001), p.371. (10.1016/S0142-9612(00)00195-2)
B.S. Becker, PhD thesis, The powder metallurgy of surgical implant alloys with reference to corrosion resistance and mechanical properties, University of Bradford, (1996).
W. Rostoker, J.O. Galante, J. Biomec. Eng., 101, (1979), p.2. (10.1115/1.3426221)
J.A. Davidson, Hip Soc. Meeting, Washington DC, (1992), p.2.
J.E. Smeathers, V. Wright, Proc. Inst. Mech Eng., Part H, 204, (1990), p.25. (10.1243/PIME_PROC_1990_204_244_02)
J.Q. Yao, A. Unsworth, Proc. Inst. Mech. Eng. part H, 207, (19930, p.245. (10.1243/PIME_PROC_1993_207_303_02)
S.C. Scholes, A. Unsworth , R.M. Hall, R. Scott, Wear 241, (2000), p.209. (10.1016/S0043-1648(00)00377-X)
D. Dowson, Inst. Mech. Eng. part H, 206, (19920, p.1.
Z.M. Jin, D. Dowson, J. Fisher, Inst. Mech. Eng. part H, 211, (1997), p.247.
A. Wang, C. Stark, J.H. Dumbleton, Proc. Inst. Mech Eng., Part H, 210, (1996), p.137.
S.M. Kurtz, C.M. Rimnac, L. Pruitt, C.W. Walker, A.A. Edidin, Biomaterials 21 (2000), p.283. (10.1016/S0142-9612(99)00178-7)
J. Fisher, E. Ingham, B.M. Wrobleswki, M. Stone, Polyethylene in Orthopaedics, Inst. of Materials, Oct 1997, London.
B. Weightman, S.A. Swanson, G.H. Isaac, B.M. Wroblewski, J. Bone & Joint Surg., 73-B, (1991), p.806. (10.1302/0301-620X.73B5.1894671)
J.M. Lee, E.A. Salvati, F. Betts, E.F. DiCarlo, S.B. Doty, P.G. Bullough, J. Bone & Joint Surg., 74-B, (1992), p.380. (10.1302/0301-620X.74B3.1587882)
B.D. Ratner, A.S. Hoffman, F.J. Schoen, J.E. Lemons, Biomaterials Science, Materials in Medicine, Acad. Press, (1996). (10.1016/B978-012582460-6/50002-5)
G.W. Blunn, P.S. Walker, C.J. Bell, 42 nd Ann: Meeting, Orthopaedic Res. Soc., (1996), Atlanta, USA.
G. Blunn, C. Bell, P.S. Walker, Polyethylene in Orthopaedics, Inst. of Materials, Oct 1997, London.
L.P. Ward, C. Subramanian, K.N. Strafford, T.P. Wilks, Proc. Inst. Mech. Engnr., Part H, 212, (1998), p.303.
J. Fisher et al, Surface Engineering for Hip prostheses, EPSRC/DTI Medlink Project, 2000, University of Leeds.
A. Unsworth, Proc. Inst. Mech Eng., Part H, 205, (1991), p.259.
J.D. Bolton et al, Development of a new generation of artificial hip joints containing compliant layers, Final Tech Report, EU project BE-4249-90, (1996).

Dates

Type	When
Created	16 years, 5 months ago (March 11, 2009, 5:20 p.m.)
Deposited	4 years, 7 months ago (Jan. 12, 2021, 6:03 p.m.)
Indexed	1 year, 6 months ago (Feb. 2, 2024, 10:28 a.m.)
Issued	22 years, 10 months ago (Oct. 1, 2002)
Published	22 years, 10 months ago (Oct. 1, 2002)
Published Online	22 years, 10 months ago (Oct. 1, 2002)

Funders 0

None

BibTeX

@article{Bolton_2002, title={Problems with Wear in Artificial Orthopaedic Joint Replacements: a Review}, volume={230–232}, ISSN={1662-9795}, url={http://dx.doi.org/10.4028/www.scientific.net/kem.230-232.447}, DOI={10.4028/www.scientific.net/kem.230-232.447}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Bolton, J.D.}, year={2002}, month=oct, pages={447–454} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2024,
        2,
        2
      ]
    ],
    "date-time": "2024-02-02T15:28:35Z",
    "timestamp": 1706887715907
  },
  "reference-count": 27,
  "publisher": "Trans Tech Publications, Ltd.",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            2002,
            10,
            25
          ]
        ],
        "date-time": "2002-10-25T00:00:00Z",
        "timestamp": 1035504000000
      },
      "content-version": "vor",
      "delay-in-days": 24,
      "URL": "https://www.scientific.net/PolicyAndEthics/PublishingPolicies"
    },
    {
      "start": {
        "date-parts": [
          [
            2002,
            10,
            25
          ]
        ],
        "date-time": "2002-10-25T00:00:00Z",
        "timestamp": 1035504000000
      },
      "content-version": "tdm",
      "delay-in-days": 24,
      "URL": "https://www.scientific.net/license/TDM_Licenser.pdf"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "DOI": "10.4028/www.scientific.net/kem.230-232.447",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2009,
        3,
        11
      ]
    ],
    "date-time": "2009-03-11T21:20:19Z",
    "timestamp": 1236806419000
  },
  "page": "447-454",
  "source": "Crossref",
  "is-referenced-by-count": 5,
  "title": "Problems with Wear in Artificial Orthopaedic Joint Replacements: a Review",
  "prefix": "10.4028",
  "volume": "230-232",
  "author": [
    {
      "given": "J.D.",
      "family": "Bolton",
      "sequence": "first",
      "affiliation": [
        {
          "name": "University of Bradford"
        }
      ]
    }
  ],
  "member": "2457",
  "published-online": {
    "date-parts": [
      [
        2002,
        10
      ]
    ]
  },
  "reference": [
    {
      "key": "3229270",
      "unstructured": "D. Davis, Proc. Inst. Mech. Engrs. 181, (1967), p.25."
    },
    {
      "key": "3229271",
      "unstructured": "A Review of the UK research base in Biomaterials, Royal Acad. Engrs., London, (1998)."
    },
    {
      "key": "3229272",
      "unstructured": "J.H. Dumbleton, Tribology of Natural Joints, Series 3, Elsevier, (1981), p.3."
    },
    {
      "key": "3229273",
      "unstructured": "M.J. Pappas, P.E. Frederick, M.D. Beuchal, Biomechanics and design rationale: New Jersey LCS knee replacement system, Depuy Int, (1993)."
    },
    {
      "key": "3229274",
      "unstructured": "Corin Group Ltd, Cirencester, UK."
    },
    {
      "key": "3229275",
      "doi-asserted-by": "crossref",
      "unstructured": "H.A. Amstutz, P. Grigoris, Clin. Ortho. & Related Research, 329s, (1996), p. S11.",
      "DOI": "10.1097/00003086-199608001-00003"
    },
    {
      "key": "3229276",
      "doi-asserted-by": "crossref",
      "unstructured": "G. Lewis, Biomaterials, 22, (2001), p.371.",
      "DOI": "10.1016/S0142-9612(00)00195-2"
    },
    {
      "key": "3229277",
      "unstructured": "B.S. Becker, PhD thesis, The powder metallurgy of surgical implant alloys with reference to corrosion resistance and mechanical properties, University of Bradford, (1996)."
    },
    {
      "key": "3229278",
      "doi-asserted-by": "crossref",
      "unstructured": "W. Rostoker, J.O. Galante, J. Biomec. Eng., 101, (1979), p.2.",
      "DOI": "10.1115/1.3426221"
    },
    {
      "key": "3229279",
      "unstructured": "J.A. Davidson, Hip Soc. Meeting, Washington DC, (1992), p.2."
    },
    {
      "key": "3229280",
      "doi-asserted-by": "crossref",
      "unstructured": "J.E. Smeathers, V. Wright, Proc. Inst. Mech Eng., Part H, 204, (1990), p.25.",
      "DOI": "10.1243/PIME_PROC_1990_204_244_02"
    },
    {
      "key": "3229281",
      "doi-asserted-by": "crossref",
      "unstructured": "J.Q. Yao, A. Unsworth, Proc. Inst. Mech. Eng. part H, 207, (19930, p.245.",
      "DOI": "10.1243/PIME_PROC_1993_207_303_02"
    },
    {
      "key": "3229282",
      "doi-asserted-by": "crossref",
      "unstructured": "S.C. Scholes, A. Unsworth , R.M. Hall, R. Scott, Wear 241, (2000), p.209.",
      "DOI": "10.1016/S0043-1648(00)00377-X"
    },
    {
      "key": "3229283",
      "unstructured": "D. Dowson, Inst. Mech. Eng. part H, 206, (19920, p.1."
    },
    {
      "key": "3229284",
      "unstructured": "Z.M. Jin, D. Dowson, J. Fisher, Inst. Mech. Eng. part H, 211, (1997), p.247."
    },
    {
      "key": "3229285",
      "unstructured": "A. Wang, C. Stark, J.H. Dumbleton, Proc. Inst. Mech Eng., Part H, 210, (1996), p.137."
    },
    {
      "key": "3229286",
      "doi-asserted-by": "crossref",
      "unstructured": "S.M. Kurtz, C.M. Rimnac, L. Pruitt, C.W. Walker, A.A. Edidin, Biomaterials 21 (2000), p.283.",
      "DOI": "10.1016/S0142-9612(99)00178-7"
    },
    {
      "key": "3229287",
      "unstructured": "J. Fisher, E. Ingham, B.M. Wrobleswki, M. Stone, Polyethylene in Orthopaedics, Inst. of Materials, Oct 1997, London."
    },
    {
      "key": "3229288",
      "doi-asserted-by": "crossref",
      "unstructured": "B. Weightman, S.A. Swanson, G.H. Isaac, B.M. Wroblewski, J. Bone & Joint Surg., 73-B, (1991), p.806.",
      "DOI": "10.1302/0301-620X.73B5.1894671"
    },
    {
      "key": "3229289",
      "doi-asserted-by": "crossref",
      "unstructured": "J.M. Lee, E.A. Salvati, F. Betts, E.F. DiCarlo, S.B. Doty, P.G. Bullough, J. Bone & Joint Surg., 74-B, (1992), p.380.",
      "DOI": "10.1302/0301-620X.74B3.1587882"
    },
    {
      "key": "3229290",
      "doi-asserted-by": "crossref",
      "unstructured": "B.D. Ratner, A.S. Hoffman, F.J. Schoen, J.E. Lemons, Biomaterials Science, Materials in Medicine, Acad. Press, (1996).",
      "DOI": "10.1016/B978-012582460-6/50002-5"
    },
    {
      "key": "3229291",
      "unstructured": "G.W. Blunn, P.S. Walker, C.J. Bell, 42 nd Ann: Meeting, Orthopaedic Res. Soc., (1996), Atlanta, USA."
    },
    {
      "key": "3229292",
      "unstructured": "G. Blunn, C. Bell, P.S. Walker, Polyethylene in Orthopaedics, Inst. of Materials, Oct 1997, London."
    },
    {
      "key": "3229293",
      "unstructured": "L.P. Ward, C. Subramanian, K.N. Strafford, T.P. Wilks, Proc. Inst. Mech. Engnr., Part H, 212, (1998), p.303."
    },
    {
      "key": "3229294",
      "unstructured": "J. Fisher et al, Surface Engineering for Hip prostheses, EPSRC/DTI Medlink Project, 2000, University of Leeds."
    },
    {
      "key": "3229295",
      "unstructured": "A. Unsworth, Proc. Inst. Mech Eng., Part H, 205, (1991), p.259."
    },
    {
      "key": "3229296",
      "unstructured": "J.D. Bolton et al, Development of a new generation of artificial hip joints containing compliant layers, Final Tech Report, EU project BE-4249-90, (1996)."
    }
  ],
  "container-title": "Key Engineering Materials",
  "original-title": [],
  "link": [
    {
      "URL": "https://www.scientific.net/KEM.230-232.447.pdf",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "similarity-checking"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2021,
        1,
        12
      ]
    ],
    "date-time": "2021-01-12T23:03:59Z",
    "timestamp": 1610492639000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "https://www.scientific.net/KEM.230-232.447"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        2002,
        10
      ]
    ]
  },
  "references-count": 27,
  "URL": "http://dx.doi.org/10.4028/www.scientific.net/KEM.230-232.447",
  "relation": {},
  "ISSN": [
    "1662-9795"
  ],
  "subject": [],
  "container-title-short": "KEM",
  "published": {
    "date-parts": [
      [
        2002,
        10
      ]
    ]
  }
}