DOI: 10.2320/matertrans1960.13.32. The Effects of Grain Size and Carbon Content on the Ductility of Recrystallized Molybdenum Wire

The Effects of Grain Size and Carbon Content on the Ductility of Recrystallized Molybdenum Wire

10.2320/matertrans1960.13.32

Crossref journal-article

Japan Institute of Metals

Transactions of the Japan Institute of Metals (1149)

Bibliography

Aritomi, N., & Tsuya, K. (1972). The Effects of Grain Size and Carbon Content on the Ductility of Recrystallized Molybdenum Wire. Transactions of the Japan Institute of Metals, 13(1), 32â38.

Authors 2

Noriyoshi Aritomi (first)
Kazuo Tsuya (additional)

References 40 Referenced 5

1) L. E. Olds and G. W. P. Rengstorff: J. Metals, 8 (1956), 150. (10.1007/BF03377662)
2) H. S. Spacil and J. Wulff: The Metal Molybdenum, ASM, (1958), p. 262.
3) R. E. Maringer and A. D. Schwope: J. Metals, 6 (1954), 356. (10.1007/BF03398019)
4) A. Lawley, J. Van den Sype and R. Maddin: J. Inst. Metals, 91 (1962), 23.
5) W. N. Platte: The Metal Molybdenum, ASM, (1958), p. 151.
6) M. Basche: Sc. D. Thesis in Metallurgy, MIT, (1956).
7) H. B. Goodwin: Trans. ASM, 46 (1954), 1465, Written Discussion to J. H. Bechtold’s paper.
8) K. Tsuya and N. Aritomi: J. Japan Inst. Metals, 25 (1961), 467. (10.2320/jinstmet1952.25.7_467)
9) K. Tsuya and N. Aritomi: J. Japan Inst. Metals, 30 (1966), 952. (10.2320/jinstmet1952.30.10_952)
10) K. Tsuya and N. Aritomi: J. Less-Common Metals, 15 (1968), 245. (10.1016/0022-5088(68)90183-5)
11) J. H. Bechtold and H. Scott: J. Electrochem. Soc., 98 (1951), 495. (10.1149/1.2778031)
12) K. Tsuya and N. Aritomi: J. Japan Inst. Metals, 26 (1962), 730. (10.2320/jinstmet1952.26.11_730)
13) J. H. Rendall, S. T. M. Johnstone and W. E. Carrington: J. Inst. Metals, 82 (1953–1954), 345.
14) A. Milner and T. R. Bergstrom: J. Less-Common Metals, 12 (1967), 253. (10.1016/0022-5088(67)90123-3)
15) H. Lutz, F. Benesovsky and R. Kieffer: J. Less-Common Metals, 16 (1968), 249. (10.1016/0022-5088(68)90021-0)
16) H. Braun, M. Semchyshen and R. Q. Barr: Plansee Proceedings 1964, Metallwerk Plansee AG., (1965), P. 351.
17) A. A. Johnson: Phil. Mag., 4 (1959), 194. (10.1080/14786435908243256)
18) A. S. Wronski and A. A. Johnson: Phil. Mag., 7 (1962), 213. (10.1080/14786436208211856)
19) R. H. Forster and A. Gilbert: J. Less-Common Metals, 20 (1970), 315. (10.1016/0022-5088(70)90006-8)
20) A. Okada: J. Iron and Steel Inst. Japan, 48 (1962), 544; (10.2355/tetsutohagane1955.48.4_613)
 A. Okada: J. Iron and Steel Inst. Japan, 49 (1963), 535.
21) N. J. Petch: J. Iron and Steel Inst., 174 (1953), 25.
22) N. J. Petch: Phil. Mag., 1 (1956), 186. (10.1080/14786435608238091)
23) A. H. Cottrell: Trans. Met. Soc. AIME, 212 (1958), 192.
24) P. W. Bridgman: Trans. ASM, 32 (1944), 553. (10.1109/JRPROC.1944.233371)
25) R. Palme: 6th Plansee Seminar 1968, Metallwerk Plansee AG., (1969), p. 159.
26) M. Semchyshen and G. A. Timmons: Trans. AIME, 194 (1952), 279. (10.1007/BF03397692)
27) R. N. Orava: Trans. Met. Soc. AIME, 230 (1964), 1614.
28) C. S. Barrett: Structure of Metals, McGraw-Hill Book Co. Inc., (1952), p. 489.
29) R. A. Swalin and A. H. Geisler: J. Metals, 8 (1956), 1259. (10.1007/BF03377862)
30) G. L. Davis and P. J. Burdon: Metal Treatment and Drop Forging, 25 (1958), 495.
31) F. Guiu and P. L. Pratt: phys. stat. sol., 15 (1966), 539. (10.1002/pssb.19660150214)
32) W. L. Bruckart: Fabrication of Molybdenum, ASM, (1959), p. 39.
33) D. McLean: Grain Boundaries in Metals, Oxford, (1957), p. 296.
34) M. D. Francois: Compt. rend., Series C, 268 (1969), 580.
35) R. E. Hook and A. M. Adair: Trans. Met. Soc. AIME, 227 (1963), 151.
36) J. C. Thornley and A. S. Wronski: J. Less-Common Metals, 21 (1970), 205. (10.1016/0022-5088(70)90120-7)
37) H. Conrad: Metallurgical Society Conferences, Vol. 34, AIME, (1964), p. 113.
38) G. T. Hahn and A. R. Rosenfield: Acta Met., 14 (1966), 1815. (10.1016/0001-6160(66)90034-4)
39) G. T. Hahn and A. R. Rosenfield: Trans. Met. Soc. AIME, 239 (1967), 668.

Dates

Type	When
Created	11 years, 5 months ago (March 19, 2014, 11:17 p.m.)
Deposited	3 years, 4 months ago (March 30, 2022, 9:55 a.m.)
Indexed	3 years, 4 months ago (April 4, 2022, 5:45 p.m.)
Issued	53 years, 7 months ago (Jan. 1, 1972)
Published	53 years, 7 months ago (Jan. 1, 1972)
Published Print	53 years, 7 months ago (Jan. 1, 1972)

Funders 0

None

BibTeX

@article{Aritomi_1972, title={The Effects of Grain Size and Carbon Content on the Ductility of Recrystallized Molybdenum Wire}, volume={13}, ISSN={2432-4701}, url={http://dx.doi.org/10.2320/matertrans1960.13.32}, DOI={10.2320/matertrans1960.13.32}, number={1}, journal={Transactions of the Japan Institute of Metals}, publisher={Japan Institute of Metals}, author={Aritomi, Noriyoshi and Tsuya, Kazuo}, year={1972}, pages={32–38} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2022,
        4,
        4
      ]
    ],
    "date-time": "2022-04-04T21:45:28Z",
    "timestamp": 1649108728684
  },
  "reference-count": 40,
  "publisher": "Japan Institute of Metals",
  "issue": "1",
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        1972
      ]
    ]
  },
  "DOI": "10.2320/matertrans1960.13.32",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2014,
        3,
        20
      ]
    ],
    "date-time": "2014-03-20T03:17:25Z",
    "timestamp": 1395285445000
  },
  "page": "32-38",
  "source": "Crossref",
  "is-referenced-by-count": 5,
  "title": "The Effects of Grain Size and Carbon Content on the Ductility of Recrystallized Molybdenum Wire",
  "prefix": "10.2320",
  "volume": "13",
  "author": [
    {
      "given": "Noriyoshi",
      "family": "Aritomi",
      "sequence": "first",
      "affiliation": [
        {
          "name": "National Research Institute for Metals"
        }
      ]
    },
    {
      "given": "Kazuo",
      "family": "Tsuya",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "National Research Institute for Metals"
        }
      ]
    }
  ],
  "member": "1149",
  "reference": [
    {
      "key": "1",
      "doi-asserted-by": "crossref",
      "unstructured": "1) L. E. Olds and G. W. P. Rengstorff: J. Metals, 8 (1956), 150.",
      "DOI": "10.1007/BF03377662"
    },
    {
      "key": "2",
      "unstructured": "2) H. S. Spacil and J. Wulff: The Metal Molybdenum, ASM, (1958), p. 262."
    },
    {
      "key": "3",
      "doi-asserted-by": "crossref",
      "unstructured": "3) R. E. Maringer and A. D. Schwope: J. Metals, 6 (1954), 356.",
      "DOI": "10.1007/BF03398019"
    },
    {
      "key": "4",
      "unstructured": "4) A. Lawley, J. Van den Sype and R. Maddin: J. Inst. Metals, 91 (1962), 23."
    },
    {
      "key": "5",
      "unstructured": "5) W. N. Platte: The Metal Molybdenum, ASM, (1958), p. 151."
    },
    {
      "key": "6",
      "unstructured": "6) M. Basche: Sc. D. Thesis in Metallurgy, MIT, (1956)."
    },
    {
      "key": "7",
      "unstructured": "7) H. B. Goodwin: Trans. ASM, 46 (1954), 1465, Written Discussion to J. H. Bechtold&rsquo;s paper."
    },
    {
      "key": "8",
      "doi-asserted-by": "crossref",
      "unstructured": "8) K. Tsuya and N. Aritomi: J. Japan Inst. Metals, 25 (1961), 467.",
      "DOI": "10.2320/jinstmet1952.25.7_467"
    },
    {
      "key": "9",
      "doi-asserted-by": "crossref",
      "unstructured": "9) K. Tsuya and N. Aritomi: J. Japan Inst. Metals, 30 (1966), 952.",
      "DOI": "10.2320/jinstmet1952.30.10_952"
    },
    {
      "key": "10",
      "doi-asserted-by": "crossref",
      "unstructured": "10) K. Tsuya and N. Aritomi: J. Less-Common Metals, 15 (1968), 245.",
      "DOI": "10.1016/0022-5088(68)90183-5"
    },
    {
      "key": "11",
      "doi-asserted-by": "crossref",
      "unstructured": "11) J. H. Bechtold and H. Scott: J. Electrochem. Soc., 98 (1951), 495.",
      "DOI": "10.1149/1.2778031"
    },
    {
      "key": "12",
      "doi-asserted-by": "crossref",
      "unstructured": "12) K. Tsuya and N. Aritomi: J. Japan Inst. Metals, 26 (1962), 730.",
      "DOI": "10.2320/jinstmet1952.26.11_730"
    },
    {
      "key": "13",
      "unstructured": "13) J. H. Rendall, S. T. M. Johnstone and W. E. Carrington: J. Inst. Metals, 82 (1953&ndash;1954), 345."
    },
    {
      "key": "14",
      "doi-asserted-by": "crossref",
      "unstructured": "14) A. Milner and T. R. Bergstrom: J. Less-Common Metals, 12 (1967), 253.",
      "DOI": "10.1016/0022-5088(67)90123-3"
    },
    {
      "key": "15",
      "doi-asserted-by": "crossref",
      "unstructured": "15) H. Lutz, F. Benesovsky and R. Kieffer: J. Less-Common Metals, 16 (1968), 249.",
      "DOI": "10.1016/0022-5088(68)90021-0"
    },
    {
      "key": "16",
      "unstructured": "16) H. Braun, M. Semchyshen and R. Q. Barr: Plansee Proceedings 1964, Metallwerk Plansee AG., (1965), P. 351."
    },
    {
      "key": "17",
      "doi-asserted-by": "crossref",
      "unstructured": "17) A. A. Johnson: Phil. Mag., 4 (1959), 194.",
      "DOI": "10.1080/14786435908243256"
    },
    {
      "key": "18",
      "doi-asserted-by": "crossref",
      "unstructured": "18) A. S. Wronski and A. A. Johnson: Phil. Mag., 7 (1962), 213.",
      "DOI": "10.1080/14786436208211856"
    },
    {
      "key": "19",
      "doi-asserted-by": "crossref",
      "unstructured": "19) R. H. Forster and A. Gilbert: J. Less-Common Metals, 20 (1970), 315.",
      "DOI": "10.1016/0022-5088(70)90006-8"
    },
    {
      "key": "20",
      "doi-asserted-by": "crossref",
      "unstructured": "20) A. Okada: J. Iron and Steel Inst. Japan, 48 (1962), 544;",
      "DOI": "10.2355/tetsutohagane1955.48.4_613"
    },
    {
      "key": "21",
      "unstructured": "&nbsp;A. Okada: J. Iron and Steel Inst. Japan, 49 (1963), 535."
    },
    {
      "key": "22",
      "unstructured": "21) N. J. Petch: J. Iron and Steel Inst., 174 (1953), 25."
    },
    {
      "key": "23",
      "doi-asserted-by": "crossref",
      "unstructured": "22) N. J. Petch: Phil. Mag., 1 (1956), 186.",
      "DOI": "10.1080/14786435608238091"
    },
    {
      "key": "24",
      "unstructured": "23) A. H. Cottrell: Trans. Met. Soc. AIME, 212 (1958), 192."
    },
    {
      "key": "25",
      "doi-asserted-by": "crossref",
      "unstructured": "24) P. W. Bridgman: Trans. ASM, 32 (1944), 553.",
      "DOI": "10.1109/JRPROC.1944.233371"
    },
    {
      "key": "26",
      "unstructured": "25) R. Palme: 6th Plansee Seminar 1968, Metallwerk Plansee AG., (1969), p. 159."
    },
    {
      "key": "27",
      "doi-asserted-by": "crossref",
      "unstructured": "26) M. Semchyshen and G. A. Timmons: Trans. AIME, 194 (1952), 279.",
      "DOI": "10.1007/BF03397692"
    },
    {
      "key": "28",
      "unstructured": "27) R. N. Orava: Trans. Met. Soc. AIME, 230 (1964), 1614."
    },
    {
      "key": "29",
      "unstructured": "28) C. S. Barrett: Structure of Metals, McGraw-Hill Book Co. Inc., (1952), p. 489."
    },
    {
      "key": "30",
      "doi-asserted-by": "crossref",
      "unstructured": "29) R. A. Swalin and A. H. Geisler: J. Metals, 8 (1956), 1259.",
      "DOI": "10.1007/BF03377862"
    },
    {
      "key": "31",
      "unstructured": "30) G. L. Davis and P. J. Burdon: Metal Treatment and Drop Forging, 25 (1958), 495."
    },
    {
      "key": "32",
      "doi-asserted-by": "crossref",
      "unstructured": "31) F. Guiu and P. L. Pratt: phys. stat. sol., 15 (1966), 539.",
      "DOI": "10.1002/pssb.19660150214"
    },
    {
      "key": "33",
      "unstructured": "32) W. L. Bruckart: Fabrication of Molybdenum, ASM, (1959), p. 39."
    },
    {
      "key": "34",
      "unstructured": "33) D. McLean: Grain Boundaries in Metals, Oxford, (1957), p. 296."
    },
    {
      "key": "35",
      "unstructured": "34) M. D. Francois: Compt. rend., Series C, 268 (1969), 580."
    },
    {
      "key": "36",
      "unstructured": "35) R. E. Hook and A. M. Adair: Trans. Met. Soc. AIME, 227 (1963), 151."
    },
    {
      "key": "37",
      "doi-asserted-by": "crossref",
      "unstructured": "36) J. C. Thornley and A. S. Wronski: J. Less-Common Metals, 21 (1970), 205.",
      "DOI": "10.1016/0022-5088(70)90120-7"
    },
    {
      "key": "38",
      "unstructured": "37) H. Conrad: Metallurgical Society Conferences, Vol. 34, AIME, (1964), p. 113."
    },
    {
      "key": "39",
      "doi-asserted-by": "crossref",
      "unstructured": "38) G. T. Hahn and A. R. Rosenfield: Acta Met., 14 (1966), 1815.",
      "DOI": "10.1016/0001-6160(66)90034-4"
    },
    {
      "key": "40",
      "unstructured": "39) G. T. Hahn and A. R. Rosenfield: Trans. Met. Soc. AIME, 239 (1967), 668."
    }
  ],
  "container-title": "Transactions of the Japan Institute of Metals",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://www.jstage.jst.go.jp/article/matertrans1960/13/1/13_1_32/_pdf",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "similarity-checking"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2022,
        3,
        30
      ]
    ],
    "date-time": "2022-03-30T13:55:59Z",
    "timestamp": 1648648559000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "https://www.jstage.jst.go.jp/article/matertrans1960/13/1/13_1_32/_article"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        1972
      ]
    ]
  },
  "references-count": 40,
  "journal-issue": {
    "issue": "1",
    "published-print": {
      "date-parts": [
        [
          1972
        ]
      ]
    }
  },
  "URL": "http://dx.doi.org/10.2320/matertrans1960.13.32",
  "relation": {},
  "ISSN": [
    "0021-4434",
    "2432-4701"
  ],
  "subject": [],
  "container-title-short": "Trans. JIM",
  "published": {
    "date-parts": [
      [
        1972
      ]
    ]
  }
}