DOI: 10.1557/jmr.2002.0026. Evaluation of Strain Rate During Equal-channel Angular Pressing

Evaluation of Strain Rate During Equal-channel Angular Pressing

10.1557/jmr.2002.0026

Crossref journal-article

Springer Science and Business Media LLC

Journal of Materials Research (297)

Abstract

Strain rate is an important factor in plastic deformation because it determines the constitutive behavior of rate sensitive materials, e.g., dislocation density and flow stress evolution, deformation heat generation, etc. In the present study, the strain rate of workpiece materials during equal-channel angular pressing (ECAP) was evaluated by a geometric approach. The results were compared to those of the finite element analyses of a model ideally plastic material with various mesh sizes. The derived equation for strain rate is in reasonably good agreement with the results of the finite element method. The effects of the die geometry (a channel angle and a corner angle) were investigated. The strain rate during ECAP increases with punch speed and decreases with die channel angle, die corner angle, and the width of the workpiece. The relation obtained can be used for analytical calculations of the deformation, thermal, and microstructural evolution behavior of materials during ECAP. In particular, the size of the deforming zone and the effect of the finite element size are discussed.

Bibliography

Kim, H. S. (2002). Evaluation of Strain Rate During Equal-channel Angular Pressing. Journal of Materials Research, 17(1), 172â179.

Authors 1

Hyoung Seop Kim (first)

References 21 Referenced 68

10.1557/JMR.2001.0113
10.1016/S1359-6462(99)00233-X
10.1016/1359-6462(96)00107-8
{'key': 'S0884291400060386_ref007', 'first-page': '86', 'volume': '291A', 'author': 'Kim', 'year': '2001', 'journal-title': 'Mater. Sci. Eng.'} / Mater. Sci. Eng. by Kim (2001)
10.1016/S0921-5093(01)01188-1
10.1016/0921-5093(95)09705-8
{'key': 'S0884291400060386_ref004', 'first-page': '99', 'volume': '1', 'author': 'Segal', 'year': '1981', 'journal-title': 'Russ. Metall. (English trans.)'} / Russ. Metall. (English trans.) by Segal (1981)
10.1016/S0079-6425(99)00007-9
10.1016/S0079-6425(97)00032-7
10.1016/0079-6425(80)90001-8
{'key': 'S0884291400060386_ref019', 'first-page': '344', 'volume': '42', 'author': 'Kim', 'year': '2001', 'journal-title': 'Mater. Trans. JIM'} / Mater. Trans. JIM by Kim (2001)
10.1007/s11661-999-0290-7
10.1016/S1359-6462(00)00565-0
10.1007/s11661-999-0287-2
10.1016/S0921-5093(00)00834-0
10.1016/S1359-6454(00)00019-7
10.1016/S1359-6462(00)00546-7
10.1016/S0924-0136(99)00096-5
10.1016/S1359-6462(97)00192-9
10.1016/S1359-6462(00)00377-8
10.1007/s11661-999-0009-9

Dates

Type	When
Created	17 years, 5 months ago (March 5, 2008, 9:41 p.m.)
Deposited	4 years, 6 months ago (Feb. 24, 2021, 3:09 p.m.)
Indexed	5 months, 2 weeks ago (March 19, 2025, 1:08 p.m.)
Issued	23 years, 8 months ago (Jan. 1, 2002)
Published	23 years, 8 months ago (Jan. 1, 2002)
Published Online	14 years, 7 months ago (Jan. 31, 2011)
Published Print	23 years, 8 months ago (Jan. 1, 2002)

Funders 0

None

BibTeX

@article{Kim_2002, title={Evaluation of Strain Rate During Equal-channel Angular Pressing}, volume={17}, ISSN={2044-5326}, url={http://dx.doi.org/10.1557/jmr.2002.0026}, DOI={10.1557/jmr.2002.0026}, number={1}, journal={Journal of Materials Research}, publisher={Springer Science and Business Media LLC}, author={Kim, Hyoung Seop}, year={2002}, month=jan, pages={172–179} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2025,
        3,
        19
      ]
    ],
    "date-time": "2025-03-19T17:08:09Z",
    "timestamp": 1742404089638
  },
  "reference-count": 21,
  "publisher": "Springer Science and Business Media LLC",
  "issue": "1",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            2011,
            1,
            31
          ]
        ],
        "date-time": "2011-01-31T00:00:00Z",
        "timestamp": 1296432000000
      },
      "content-version": "unspecified",
      "delay-in-days": 3317,
      "URL": "https://www.cambridge.org/core/terms"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        2002,
        1
      ]
    ]
  },
  "abstract": "<jats:p>Strain rate is an important factor in plastic deformation because it determines the constitutive behavior of rate sensitive materials, e.g., dislocation density and flow stress evolution, deformation heat generation, etc. In the present study, the strain rate of workpiece materials during equal-channel angular pressing (ECAP) was evaluated by a geometric approach. The results were compared to those of the finite element analyses of a model ideally plastic material with various mesh sizes. The derived equation for strain rate is in reasonably good agreement with the results of the finite element method. The effects of the die geometry (a channel angle and a corner angle) were investigated. The strain rate during ECAP increases with punch speed and decreases with die channel angle, die corner angle, and the width of the workpiece. The relation obtained can be used for analytical calculations of the deformation, thermal, and microstructural evolution behavior of materials during ECAP. In particular, the size of the deforming zone and the effect of the finite element size are discussed.</jats:p>",
  "DOI": "10.1557/jmr.2002.0026",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2008,
        3,
        6
      ]
    ],
    "date-time": "2008-03-06T02:41:10Z",
    "timestamp": 1204771270000
  },
  "page": "172-179",
  "source": "Crossref",
  "is-referenced-by-count": 68,
  "title": "Evaluation of Strain Rate During Equal-channel Angular Pressing",
  "prefix": "10.1557",
  "volume": "17",
  "author": [
    {
      "given": "Hyoung Seop",
      "family": "Kim",
      "sequence": "first",
      "affiliation": []
    }
  ],
  "member": "297",
  "published-online": {
    "date-parts": [
      [
        2011,
        1,
        31
      ]
    ]
  },
  "reference": [
    {
      "key": "S0884291400060386_ref021",
      "doi-asserted-by": "publisher",
      "DOI": "10.1557/JMR.2001.0113"
    },
    {
      "key": "S0884291400060386_ref023",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/S1359-6462(99)00233-X"
    },
    {
      "key": "S0884291400060386_ref008",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/1359-6462(96)00107-8"
    },
    {
      "key": "S0884291400060386_ref007",
      "first-page": "86",
      "volume": "291A",
      "author": "Kim",
      "year": "2001",
      "journal-title": "Mater. Sci. Eng."
    },
    {
      "key": "S0884291400060386_ref006",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/S0921-5093(01)01188-1"
    },
    {
      "key": "S0884291400060386_ref005",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/0921-5093(95)09705-8"
    },
    {
      "key": "S0884291400060386_ref004",
      "first-page": "99",
      "volume": "1",
      "author": "Segal",
      "year": "1981",
      "journal-title": "Russ. Metall. (English trans.)"
    },
    {
      "key": "S0884291400060386_ref003",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/S0079-6425(99)00007-9"
    },
    {
      "key": "S0884291400060386_ref002",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/S0079-6425(97)00032-7"
    },
    {
      "key": "S0884291400060386_ref001",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/0079-6425(80)90001-8"
    },
    {
      "key": "S0884291400060386_ref019",
      "first-page": "344",
      "volume": "42",
      "author": "Kim",
      "year": "2001",
      "journal-title": "Mater. Trans. JIM"
    },
    {
      "key": "S0884291400060386_ref018",
      "doi-asserted-by": "publisher",
      "DOI": "10.1007/s11661-999-0290-7"
    },
    {
      "key": "S0884291400060386_ref017",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/S1359-6462(00)00565-0"
    },
    {
      "key": "S0884291400060386_ref016",
      "doi-asserted-by": "publisher",
      "DOI": "10.1007/s11661-999-0287-2"
    },
    {
      "key": "S0884291400060386_ref015",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/S0921-5093(00)00834-0"
    },
    {
      "key": "S0884291400060386_ref014",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/S1359-6454(00)00019-7"
    },
    {
      "key": "S0884291400060386_ref013",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/S1359-6462(00)00546-7"
    },
    {
      "key": "S0884291400060386_ref012",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/S0924-0136(99)00096-5"
    },
    {
      "key": "S0884291400060386_ref011",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/S1359-6462(97)00192-9"
    },
    {
      "key": "S0884291400060386_ref010",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/S1359-6462(00)00377-8"
    },
    {
      "key": "S0884291400060386_ref020",
      "doi-asserted-by": "publisher",
      "DOI": "10.1007/s11661-999-0009-9"
    }
  ],
  "container-title": "Journal of Materials Research",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://www.cambridge.org/core/services/aop-cambridge-core/content/view/S0884291400060386",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "similarity-checking"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2021,
        2,
        24
      ]
    ],
    "date-time": "2021-02-24T20:09:18Z",
    "timestamp": 1614197358000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "http://link.springer.com/10.1557/JMR.2002.0026"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        2002,
        1
      ]
    ]
  },
  "references-count": 21,
  "journal-issue": {
    "issue": "1",
    "published-print": {
      "date-parts": [
        [
          2002,
          1
        ]
      ]
    }
  },
  "alternative-id": [
    "S0884291400060386"
  ],
  "URL": "http://dx.doi.org/10.1557/JMR.2002.0026",
  "relation": {},
  "ISSN": [
    "0884-2914",
    "2044-5326"
  ],
  "subject": [],
  "container-title-short": "J. Mater. Res.",
  "published": {
    "date-parts": [
      [
        2002,
        1
      ]
    ]
  }
}