DOI: 10.1557/jmr.2000.0088. Improved adhesion of diamondlike coatings using shallow carbon implantation

Improved adhesion of diamondlike coatings using shallow carbon implantation

10.1557/jmr.2000.0088

Crossref journal-article

Springer Science and Business Media LLC

Journal of Materials Research (297)

Abstract

A surface layer of metal carbides provides an excellent interface to achieve a highly adherent diamondlike carbon (DLC) coating. A plasma immersion ion implantation (PIII)-based procedure is described, which delivers a high retained dose of implanted carbon at the surface of aluminum alloys. A shallow implantation profile, followed by argon sputter cleaning and continued until a saturated carbon matrix is brought to the surface, provides an excellent interface for subsequent growth of DLC. At a carbon retained dose above 1018 atoms/cm2 the DLC adhesion exceeds the coating's cohesion strength. Regardless of the silicon content in the aluminum, the coating produced by this method required tensile strengths typically exceeding 140 MPa to separate an epoxy-coated stud from the coating in a standard pull test. Improved DLC adhesion was also observed on chromium and titanium. The reported tensile strength is believed to substantially exceed performance of DLC coatings produced by any other method.

Bibliography

Malaczynski, G. W., Elmoursi, A. A., Leung, C. H., Hamdi, A. H., & Campbell, A. B. (2000). Improved adhesion of diamondlike coatings using shallow carbon implantation. Journal of Materials Research, 15(3), 590â592.

Authors 5

Gerard W. Malaczynski (first)
Alaa A. Elmoursi (additional)
Chi H. Leung (additional)
Aboud H. Hamdi (additional)
Albert B. Campbell (additional)

References 9 Referenced 7

{'key': 'S0884291400054303_ref004', 'first-page': '54', 'volume-title': 'Handbook of Ternary Alloy Phase Diagrams', 'volume': '2', 'author': 'Villars', 'year': '1997'} / Handbook of Ternary Alloy Phase Diagrams by Villars (1997)
10.1007/s11665-997-0019-y
10.1016/0257-8972(91)90187-2
10.1017/CBO9780511565007.016
{'key': 'S0884291400054303_ref009', 'first-page': '103', 'volume': '395', 'author': 'Hamdi', 'year': '1998', 'journal-title': 'Surf. Coat. Technol.'} / Surf. Coat. Technol. by Hamdi (1998)
10.1016/S0257-8972(97)00062-5
10.1016/S0257-8972(97)00061-3
1. Malaczynski G.W. , Qiu X. , Mantese J.V. , Elmoursi A.A. , Hamdi A.H. , Wood B.P. , Walter K.C. , and Nastasi M.A. , Patent U.S. No. 5 458 927 (17 October 1995).
{'key': 'S0884291400054303_ref005', 'first-page': '411', 'volume-title': 'Mechanical Behavior of Diamond and Other Forms of Carbon', 'volume': '383', 'author': 'Walter', 'year': '1995'} / Mechanical Behavior of Diamond and Other Forms of Carbon by Walter (1995)

Dates

Type	When
Created	17 years, 5 months ago (March 5, 2008, 9:35 p.m.)
Deposited	4 years, 6 months ago (Feb. 24, 2021, 5:16 p.m.)
Indexed	1 year, 2 months ago (May 31, 2024, 10:33 a.m.)
Issued	25 years, 5 months ago (March 1, 2000)
Published	25 years, 5 months ago (March 1, 2000)
Published Online	14 years, 6 months ago (Jan. 31, 2011)
Published Print	25 years, 5 months ago (March 1, 2000)

Funders 0

None

BibTeX

@article{Malaczynski_2000, title={Improved adhesion of diamondlike coatings using shallow carbon implantation}, volume={15}, ISSN={2044-5326}, url={http://dx.doi.org/10.1557/jmr.2000.0088}, DOI={10.1557/jmr.2000.0088}, number={3}, journal={Journal of Materials Research}, publisher={Springer Science and Business Media LLC}, author={Malaczynski, Gerard W. and Elmoursi, Alaa A. and Leung, Chi H. and Hamdi, Aboud H. and Campbell, Albert B.}, year={2000}, month=mar, pages={590–592} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2024,
        5,
        31
      ]
    ],
    "date-time": "2024-05-31T14:33:10Z",
    "timestamp": 1717165990196
  },
  "reference-count": 9,
  "publisher": "Springer Science and Business Media LLC",
  "issue": "3",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            2011,
            1,
            31
          ]
        ],
        "date-time": "2011-01-31T00:00:00Z",
        "timestamp": 1296432000000
      },
      "content-version": "unspecified",
      "delay-in-days": 3988,
      "URL": "https://www.cambridge.org/core/terms"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        2000,
        3
      ]
    ]
  },
  "abstract": "<jats:p>A surface layer of metal carbides provides an excellent interface to achieve a highly adherent diamondlike carbon (DLC) coating. A plasma immersion ion implantation (PIII)-based procedure is described, which delivers a high retained dose of implanted carbon at the surface of aluminum alloys. A shallow implantation profile, followed by argon sputter cleaning and continued until a saturated carbon matrix is brought to the surface, provides an excellent interface for subsequent growth of DLC. At a carbon retained dose above 10<jats:sup>18</jats:sup> atoms/cm<jats:sup>2</jats:sup> the DLC adhesion exceeds the coating's cohesion strength. Regardless of the silicon content in the aluminum, the coating produced by this method required tensile strengths typically exceeding 140 MPa to separate an epoxy-coated stud from the coating in a standard pull test. Improved DLC adhesion was also observed on chromium and titanium. The reported tensile strength is believed to substantially exceed performance of DLC coatings produced by any other method.</jats:p>",
  "DOI": "10.1557/jmr.2000.0088",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2008,
        3,
        6
      ]
    ],
    "date-time": "2008-03-06T02:35:28Z",
    "timestamp": 1204770928000
  },
  "page": "590-592",
  "source": "Crossref",
  "is-referenced-by-count": 7,
  "title": "Improved adhesion of diamondlike coatings using shallow carbon implantation",
  "prefix": "10.1557",
  "volume": "15",
  "author": [
    {
      "given": "Gerard W.",
      "family": "Malaczynski",
      "sequence": "first",
      "affiliation": []
    },
    {
      "given": "Alaa A.",
      "family": "Elmoursi",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "Chi H.",
      "family": "Leung",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "Aboud H.",
      "family": "Hamdi",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "Albert B.",
      "family": "Campbell",
      "sequence": "additional",
      "affiliation": []
    }
  ],
  "member": "297",
  "published-online": {
    "date-parts": [
      [
        2011,
        1,
        31
      ]
    ]
  },
  "reference": [
    {
      "key": "S0884291400054303_ref004",
      "first-page": "54",
      "volume-title": "Handbook of Ternary Alloy Phase Diagrams",
      "volume": "2",
      "author": "Villars",
      "year": "1997"
    },
    {
      "key": "S0884291400054303_ref002",
      "doi-asserted-by": "publisher",
      "DOI": "10.1007/s11665-997-0019-y"
    },
    {
      "key": "S0884291400054303_ref007",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/0257-8972(91)90187-2"
    },
    {
      "key": "S0884291400054303_ref006",
      "doi-asserted-by": "publisher",
      "DOI": "10.1017/CBO9780511565007.016"
    },
    {
      "key": "S0884291400054303_ref009",
      "first-page": "103",
      "volume": "395",
      "author": "Hamdi",
      "year": "1998",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "S0884291400054303_ref008",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/S0257-8972(97)00062-5"
    },
    {
      "key": "S0884291400054303_ref003",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/S0257-8972(97)00061-3"
    },
    {
      "key": "S0884291400054303_ref001",
      "unstructured": "1. Malaczynski G.W. , Qiu X. , Mantese J.V. , Elmoursi A.A. , Hamdi A.H. , Wood B.P. , Walter K.C. , and Nastasi M.A. , Patent U.S. No. 5 458 927 (17 October 1995)."
    },
    {
      "key": "S0884291400054303_ref005",
      "first-page": "411",
      "volume-title": "Mechanical Behavior of Diamond and Other Forms of Carbon",
      "volume": "383",
      "author": "Walter",
      "year": "1995"
    }
  ],
  "container-title": "Journal of Materials Research",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://www.cambridge.org/core/services/aop-cambridge-core/content/view/S0884291400054303",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "similarity-checking"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2021,
        2,
        24
      ]
    ],
    "date-time": "2021-02-24T22:16:00Z",
    "timestamp": 1614204960000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "http://link.springer.com/10.1557/JMR.2000.0088"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        2000,
        3
      ]
    ]
  },
  "references-count": 9,
  "journal-issue": {
    "issue": "3",
    "published-print": {
      "date-parts": [
        [
          2000,
          3
        ]
      ]
    }
  },
  "alternative-id": [
    "S0884291400054303"
  ],
  "URL": "http://dx.doi.org/10.1557/JMR.2000.0088",
  "relation": {},
  "ISSN": [
    "0884-2914",
    "2044-5326"
  ],
  "subject": [],
  "container-title-short": "J. Mater. Res.",
  "published": {
    "date-parts": [
      [
        2000,
        3
      ]
    ]
  }
}