DOI: 10.1520/jte12391j. An Instrumented Microindentation Testing Device

An Instrumented Microindentation Testing Device

10.1520/jte12391j

Crossref journal-article

ASTM International

Journal of Testing and Evaluation (381)

Abstract

Abstract An experimental device for microindentation testing has been designed and constructed. The device can be used together with standard testing machines and allows for continuous recording of indentation loads up to approximately 500 N and indentation depths in the range 1 to 100 µm. Special care has been taken in order to minimize the effects of elastic deformations in the experimental setup as well as deformation of the foundation. To check the reliability as well as the accuracy of the experimental device, microindentation tests, using a standard Vickers indenter, were performed on three well-characterized materials and the experimental results compared with earlier experimental and theoretical findings as well as with presently performed three-dimensional finite element calculations.

Bibliography

Ãberg, H., Larsson, P.-L., & Magnius, O. (2001). An Instrumented Microindentation Testing Device. Journal of Testing and Evaluation, 29(1), 50â59.

Authors 3

H Öberg (first)
P-L Larsson (additional)
O Magnius (additional)

References 39 Referenced 5

{'volume-title': 'Hardness of Metals', 'year': '1951', 'author': 'Tabor', 'key': '2025062720502204000_c1'} / Hardness of Metals by Tabor (1951)
10.1016/0022-5096(70)90029-3 / Journal of the Mechanics and Physics of Solids / The Correlation of Indentation Experiments by Johnson (1970)
{'key': '2025062720502204000_c3', 'first-page': '301', 'article-title': 'A Theoretical Study of the Brinell Hardness Test', 'volume-title': 'Proceedings of the Royal Society of London', 'author': 'Hill', 'year': '1989'} / Proceedings of the Royal Society of London / A Theoretical Study of the Brinell Hardness Test by Hill (1989)
10.1557/JMR.1992.0618 / Journal of Material Research / A Study of the Mechanics of Microindentation Using Finite Elements by Laursen (1992)
10.1115/1.2900991 / Journal of Applied Mechanics / Elastic-Plastic Finite Element Analysis of Repeated Indentation of a Half-Space by a Rigid Sphere by Kral (1993)
10.1016/0022-5096(95)00031-D / Journal of the Mechanics and Physics of Solids / An Analysis of Fully Plastic Brinell Indentation by Biwa (1995)
10.1016/0020-7683(94)90225-9 / International Journal of Solids and Structures / Analysis of Vickers Indentation by Giannakopoulos (1994)
10.1016/0020-7683(95)00033-7 / International Journal of Solids and Structures / Analysis of Berkovich Indentation by Larsson (1996)
Larsson, P.-L. , “Investigation of Sharp Contact at Rigid Plastic Conditions,” Report 233, Department of Solid Mechanics, The Royal Institute of Technology, Stockholm, Sweden, 1999. Accepted for publication in International Journal of Mechanical Sciences 0020-7403.
{'key': '2025062720502204000_c10', 'first-page': '617', 'article-title': 'Similarity Analysis of Creep Indentation Tests', 'volume-title': 'Proceedings of the Royal Society of London', 'author': 'Hill', 'year': '1992'} / Proceedings of the Royal Society of London / Similarity Analysis of Creep Indentation Tests by Hill (1992)
{'key': '2025062720502204000_c11', 'first-page': '97', 'article-title': 'Indentation of a Power Law Creeping Solid', 'volume-title': 'Proceedings of the Royal Society of London', 'author': 'Bower', 'year': '1993'} / Proceedings of the Royal Society of London / Indentation of a Power Law Creeping Solid by Bower (1993)
10.1016/0022-5096(94)90012-4 / Journal of the Mechanics and Physics of Solids / On Brinell and Boussinesq Indentation of Creeping Solids by Storåkers (1994)
10.1016/0020-7403(95)00016-Q / International Journal of Mechanical Sciences / Transient Creep Analysis of Ball Indentation by Ogbonna (1995)
10.1016/S0020-7683(96)00176-X / International Journal of Solids and Structures / Similarity Analysis of Inelastic Contact by Storåkers (1997)
10.1111/j.1151-2916.1994.tb04567.x / Journal of the American Ceramics Society / Elastic-Plastic Indentation of Hard, Brittle Materials with Spherical Indenters by Adler (1994)
10.1016/S0167-6636(96)00051-8 / Mechanics of Materials / Analysis of Pyramid Indentation of Pressure-Sensitive Hard Metals and Ceramics by Giannakopoulos (1997)
10.1016/S0921-5093(98)00752-7 / Materials Science Engineering / Tensile Stresses and Their Implication to Cracking at Pyramid Indentation of Pressure-Sensitive Hard Metals and Ceramics by Larsson (1998)
10.1088/0022-3735/15/1/023 / Journal of Physics, E: Sci. Instrum. / An Ultra-Low-Load Penetration Hardness Tester by Newey (1982)
10.1080/01418618308234914 / Philosophical Magazine / Hardness Measurements at Penetration Depths as Small as 20 nm by Pethica (1983)
{'key': '2025062720502204000_c20', 'first-page': '601', 'article-title': 'An Investigation of Hardness and Adhesion of Sputter-Deposited Aluminium on Silicon Utilizing a Continuous Indentation Test', 'volume': '1', 'author': 'Stone', 'year': '1986', 'journal-title': 'Journal of Material Research'} / Journal of Material Research / An Investigation of Hardness and Adhesion of Sputter-Deposited Aluminium on Silicon Utilizing a Continuous Indentation Test by Stone (1986)
10.1088/0031-8949/1987/T19A/010 / Physica Scripta / Tip Surface Interactions in STM and AFM by Pethica (1987)
{'key': '2025062720502204000_c22', 'first-page': '52', 'article-title': 'An Ultramicro Indentation Hardness Tester and Its Application to Thin Films', 'volume': '43', 'author': 'Yanagisawa', 'year': '1987', 'journal-title': 'Journal of the American Society of Lubrication Engineering'} / Journal of the American Society of Lubrication Engineering / An Ultramicro Indentation Hardness Tester and Its Application to Thin Films by Yanagisawa (1987)
Lashmore, D. S., Mullen, J. L., Johnson, C. E., and Polvani, R. S., US Patent no. 4,699,000, 1987.
Field, J. S. , US Patent no. 5,067,346, 1991.
{'key': '2025062720502204000_c25', 'first-page': '3', 'article-title': 'Bestimmung der Universalhärte und anderer Kennwerte an dünnen Schichten, insbesondere Hartschoffschichten', 'volume': '48', 'author': 'Behncke', 'year': '1993', 'journal-title': 'Harterei-Technische Mittei lungen'} / Harterei-Technische Mittei lungen / Bestimmung der Universalhärte und anderer Kennwerte an dünnen Schichten, insbesondere Hartschoffschichten by Behncke (1993)
Bonin, W. A. , US Patent no. 5,553,486, 1996.
{'volume-title': 'Product Information: Universal Testing Machine with Hardness Measurement Head', 'year': '1998', 'author': 'Zwick/Materials Testing', 'key': '2025062720502204000_c27'} / Product Information: Universal Testing Machine with Hardness Measurement Head by Zwick/Materials Testing (1998)
10.1557/JMR.1990.0847 / Journal of Material Research / Instrumentation of a Conventional Hardness Tester for Load-Displacement Measurement during Indentation by Pharr (1990)
10.1016/0022-5096(93)90072-N / Journal of the Mechanics and Physics of Solids / A Phenomenological Theory for Strain Gradient Effects in Plasticity by Fleck (1993)
10.1016/0956-7151(94)90502-9 / Acta Metallurgica et Materialia / Strain Gradient Plasticity: Theory and Experiment by Fleck (1994)
10.1016/0022-5096(94)90001-9 / Journal of the Mechanics and Physics Solids / Mixed-Mode I/II Fracture Behaviour by Hallbäck (1994)
10.4159/harvard.9780674731349 / Studies in Large Plastic Flow and Fracture by Bridgman (1964)
10.1115/1.3260865 / Journal of Tribology / Vickers Indentation Curves of Magnesium Oxide (MgO) by Loubet (1984)
10.1557/JMR.1986.0601 / Journal of Material Research / A Method for Interpreting the Data from Depth-Sensing Indentation Instruments by Doerner (1986)
10.1016/0020-7683(87)90116-8 / International Journal of Solids and Structures / Elastic Analyses of Some Punch Problems for a Layered Medium by King (1987)
{'volume-title': 'Materials Science and Engineering Handbook', 'year': '1994', 'author': 'Shackelford', 'key': '2025062720502204000_c36'} / Materials Science and Engineering Handbook by Shackelford (1994)
Faleskog, J. and Nilsson, F., work in progress, 1999.
10.1016/S0020-7403(98)00110-6 / International Journal of Mechanical Sciences / On Frictional Effects at Inelastic Contact Between Spherical Bodies by Carlsson (1999)
{'volume-title': 'ABAQUS Users Manual, Version 5.5', 'year': '1995', 'key': '2025062720502204000_c39'} / ABAQUS Users Manual, Version 5.5 (1995)

Dates

Type	When
Created	16 years, 6 months ago (Feb. 27, 2009, 3:24 p.m.)
Deposited	2 months ago (June 27, 2025, 8:50 p.m.)
Indexed	2 months ago (June 27, 2025, 9:10 p.m.)
Issued	24 years, 8 months ago (Jan. 1, 2001)
Published	24 years, 8 months ago (Jan. 1, 2001)
Published Print	24 years, 8 months ago (Jan. 1, 2001)

Funders 0

None

BibTeX

@article{_berg_2001, title={An Instrumented Microindentation Testing Device}, volume={29}, ISSN={0090-3973}, url={http://dx.doi.org/10.1520/jte12391j}, DOI={10.1520/jte12391j}, number={1}, journal={Journal of Testing and Evaluation}, publisher={ASTM International}, author={Öberg, H and Larsson, P-L and Magnius, O}, year={2001}, month=jan, pages={50–59} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2025,
        6,
        28
      ]
    ],
    "date-time": "2025-06-28T01:10:07Z",
    "timestamp": 1751073007735,
    "version": "3.41.0"
  },
  "reference-count": 39,
  "publisher": "ASTM International",
  "issue": "1",
  "content-domain": {
    "domain": [
      "asmedigitalcollection.asme.org"
    ],
    "crossmark-restriction": true
  },
  "published-print": {
    "date-parts": [
      [
        2001,
        1,
        1
      ]
    ]
  },
  "abstract": "<jats:title>Abstract</jats:title>\n               <jats:p>An experimental device for microindentation testing has been designed and constructed. The device can be used together with standard testing machines and allows for continuous recording of indentation loads up to approximately 500 N and indentation depths in the range 1 to 100 \u00b5m. Special care has been taken in order to minimize the effects of elastic deformations in the experimental setup as well as deformation of the foundation. To check the reliability as well as the accuracy of the experimental device, microindentation tests, using a standard Vickers indenter, were performed on three well-characterized materials and the experimental results compared with earlier experimental and theoretical findings as well as with presently performed three-dimensional finite element calculations.</jats:p>",
  "DOI": "10.1520/jte12391j",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2009,
        2,
        27
      ]
    ],
    "date-time": "2009-02-27T20:24:35Z",
    "timestamp": 1235766275000
  },
  "page": "50-59",
  "update-policy": "https://doi.org/10.1115/crossmarkpolicy-asme",
  "source": "Crossref",
  "is-referenced-by-count": 5,
  "title": "An Instrumented Microindentation Testing Device",
  "prefix": "10.1520",
  "volume": "29",
  "author": [
    {
      "given": "H",
      "family": "\u00d6berg",
      "sequence": "first",
      "affiliation": [
        {
          "name": "Royal Institute of Technology 1 Senior research engineer and associate professor , respectively, Department of Solid Mechanics, , SE-100 44, Stockholm, Sweden ."
        }
      ]
    },
    {
      "given": "P-L",
      "family": "Larsson",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "Royal Institute of Technology 1 Senior research engineer and associate professor , respectively, Department of Solid Mechanics, , SE-100 44, Stockholm, Sweden ."
        }
      ]
    },
    {
      "given": "O",
      "family": "Magnius",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "Ericsson Radio Access AB 2 Product designer , , P.O. Box 11, SE-164 93, Stockholm, Sweden ."
        }
      ]
    }
  ],
  "member": "381",
  "reference": [
    {
      "volume-title": "Hardness of Metals",
      "year": "1951",
      "author": "Tabor",
      "key": "2025062720502204000_c1"
    },
    {
      "key": "2025062720502204000_c2",
      "doi-asserted-by": "crossref",
      "first-page": "115",
      "DOI": "10.1016/0022-5096(70)90029-3",
      "article-title": "The Correlation of Indentation Experiments",
      "volume": "18",
      "author": "Johnson",
      "year": "1970",
      "journal-title": "Journal of the Mechanics and Physics of Solids",
      "ISSN": "https://id.crossref.org/issn/0022-5096",
      "issn-type": "print"
    },
    {
      "key": "2025062720502204000_c3",
      "first-page": "301",
      "article-title": "A Theoretical Study of the Brinell Hardness Test",
      "volume-title": "Proceedings of the Royal Society of London",
      "author": "Hill",
      "year": "1989"
    },
    {
      "key": "2025062720502204000_c4",
      "doi-asserted-by": "crossref",
      "first-page": "618",
      "DOI": "10.1557/JMR.1992.0618",
      "article-title": "A Study of the Mechanics of Microindentation Using Finite Elements",
      "volume": "7",
      "author": "Laursen",
      "year": "1992",
      "journal-title": "Journal of Material Research"
    },
    {
      "key": "2025062720502204000_c5",
      "doi-asserted-by": "crossref",
      "first-page": "829",
      "DOI": "10.1115/1.2900991",
      "article-title": "Elastic-Plastic Finite Element Analysis of Repeated Indentation of a Half-Space by a Rigid Sphere",
      "volume": "75",
      "author": "Kral",
      "year": "1993",
      "journal-title": "Journal of Applied Mechanics",
      "ISSN": "https://id.crossref.org/issn/0021-8936",
      "issn-type": "print"
    },
    {
      "key": "2025062720502204000_c6",
      "doi-asserted-by": "crossref",
      "first-page": "1303",
      "DOI": "10.1016/0022-5096(95)00031-D",
      "article-title": "An Analysis of Fully Plastic Brinell Indentation",
      "volume": "43",
      "author": "Biwa",
      "year": "1995",
      "journal-title": "Journal of the Mechanics and Physics of Solids",
      "ISSN": "https://id.crossref.org/issn/0022-5096",
      "issn-type": "print"
    },
    {
      "key": "2025062720502204000_c7",
      "doi-asserted-by": "crossref",
      "first-page": "2679",
      "DOI": "10.1016/0020-7683(94)90225-9",
      "article-title": "Analysis of Vickers Indentation",
      "volume": "31",
      "author": "Giannakopoulos",
      "year": "1994",
      "journal-title": "International Journal of Solids and Structures",
      "ISSN": "https://id.crossref.org/issn/0020-7683",
      "issn-type": "print"
    },
    {
      "key": "2025062720502204000_c8",
      "doi-asserted-by": "crossref",
      "first-page": "221",
      "DOI": "10.1016/0020-7683(95)00033-7",
      "article-title": "Analysis of Berkovich Indentation",
      "volume": "33",
      "author": "Larsson",
      "year": "1996",
      "journal-title": "International Journal of Solids and Structures",
      "ISSN": "https://id.crossref.org/issn/0020-7683",
      "issn-type": "print"
    },
    {
      "key": "2025062720502204000_c9",
      "unstructured": "Larsson, P.-L.\n          , \u201cInvestigation of Sharp Contact at Rigid Plastic Conditions,\u201d Report 233, Department of Solid Mechanics, The Royal Institute of Technology, Stockholm, Sweden, 1999. Accepted for publication in International Journal of Mechanical Sciences\u20080020-7403."
    },
    {
      "key": "2025062720502204000_c10",
      "first-page": "617",
      "article-title": "Similarity Analysis of Creep Indentation Tests",
      "volume-title": "Proceedings of the Royal Society of London",
      "author": "Hill",
      "year": "1992"
    },
    {
      "key": "2025062720502204000_c11",
      "first-page": "97",
      "article-title": "Indentation of a Power Law Creeping Solid",
      "volume-title": "Proceedings of the Royal Society of London",
      "author": "Bower",
      "year": "1993"
    },
    {
      "key": "2025062720502204000_c12",
      "doi-asserted-by": "crossref",
      "first-page": "307",
      "DOI": "10.1016/0022-5096(94)90012-4",
      "article-title": "On Brinell and Boussinesq Indentation of Creeping Solids",
      "volume": "42",
      "author": "Stor\u00e5kers",
      "year": "1994",
      "journal-title": "Journal of the Mechanics and Physics of Solids",
      "ISSN": "https://id.crossref.org/issn/0022-5096",
      "issn-type": "print"
    },
    {
      "key": "2025062720502204000_c13",
      "doi-asserted-by": "crossref",
      "first-page": "1179",
      "DOI": "10.1016/0020-7403(95)00016-Q",
      "article-title": "Transient Creep Analysis of Ball Indentation",
      "volume": "37",
      "author": "Ogbonna",
      "year": "1995",
      "journal-title": "International Journal of Mechanical Sciences",
      "ISSN": "https://id.crossref.org/issn/0020-7403",
      "issn-type": "print"
    },
    {
      "key": "2025062720502204000_c14",
      "doi-asserted-by": "crossref",
      "first-page": "3061",
      "DOI": "10.1016/S0020-7683(96)00176-X",
      "article-title": "Similarity Analysis of Inelastic Contact",
      "volume": "34",
      "author": "Stor\u00e5kers",
      "year": "1997",
      "journal-title": "International Journal of Solids and Structures",
      "ISSN": "https://id.crossref.org/issn/0020-7683",
      "issn-type": "print"
    },
    {
      "key": "2025062720502204000_c15",
      "doi-asserted-by": "crossref",
      "first-page": "3177",
      "DOI": "10.1111/j.1151-2916.1994.tb04567.x",
      "article-title": "Elastic-Plastic Indentation of Hard, Brittle Materials with Spherical Indenters",
      "volume": "77",
      "author": "Adler",
      "year": "1994",
      "journal-title": "Journal of the American Ceramics Society"
    },
    {
      "key": "2025062720502204000_c16",
      "doi-asserted-by": "crossref",
      "first-page": "1",
      "DOI": "10.1016/S0167-6636(96)00051-8",
      "article-title": "Analysis of Pyramid Indentation of Pressure-Sensitive Hard Metals and Ceramics",
      "volume": "25",
      "author": "Giannakopoulos",
      "year": "1997",
      "journal-title": "Mechanics of Materials"
    },
    {
      "key": "2025062720502204000_c17",
      "doi-asserted-by": "crossref",
      "first-page": "268",
      "DOI": "10.1016/S0921-5093(98)00752-7",
      "article-title": "Tensile Stresses and Their Implication to Cracking at Pyramid Indentation of Pressure-Sensitive Hard Metals and Ceramics",
      "volume": "A254",
      "author": "Larsson",
      "year": "1998",
      "journal-title": "Materials Science Engineering"
    },
    {
      "key": "2025062720502204000_c18",
      "doi-asserted-by": "crossref",
      "first-page": "119",
      "DOI": "10.1088/0022-3735/15/1/023",
      "article-title": "An Ultra-Low-Load Penetration Hardness Tester",
      "volume": "15",
      "author": "Newey",
      "year": "1982",
      "journal-title": "Journal of Physics, E: Sci. Instrum."
    },
    {
      "key": "2025062720502204000_c19",
      "doi-asserted-by": "crossref",
      "first-page": "593",
      "DOI": "10.1080/01418618308234914",
      "article-title": "Hardness Measurements at Penetration Depths as Small as 20 nm",
      "volume": "48",
      "author": "Pethica",
      "year": "1983",
      "journal-title": "Philosophical Magazine",
      "ISSN": "https://id.crossref.org/issn/1478-6435",
      "issn-type": "print"
    },
    {
      "key": "2025062720502204000_c20",
      "first-page": "601",
      "article-title": "An Investigation of Hardness and Adhesion of Sputter-Deposited Aluminium on Silicon Utilizing a Continuous Indentation Test",
      "volume": "1",
      "author": "Stone",
      "year": "1986",
      "journal-title": "Journal of Material Research"
    },
    {
      "key": "2025062720502204000_c21",
      "doi-asserted-by": "crossref",
      "first-page": "61",
      "DOI": "10.1088/0031-8949/1987/T19A/010",
      "article-title": "Tip Surface Interactions in STM and AFM",
      "volume": "T19",
      "author": "Pethica",
      "year": "1987",
      "journal-title": "Physica Scripta",
      "ISSN": "https://id.crossref.org/issn/0031-8949",
      "issn-type": "print"
    },
    {
      "key": "2025062720502204000_c22",
      "first-page": "52",
      "article-title": "An Ultramicro Indentation Hardness Tester and Its Application to Thin Films",
      "volume": "43",
      "author": "Yanagisawa",
      "year": "1987",
      "journal-title": "Journal of the American Society of Lubrication Engineering"
    },
    {
      "key": "2025062720502204000_c23",
      "unstructured": "Lashmore, D. S., Mullen, J. L., Johnson, C. E., and Polvani, R. S., US Patent no. 4,699,000, 1987."
    },
    {
      "key": "2025062720502204000_c24",
      "unstructured": "Field, J. S.\n          , US Patent no. 5,067,346, 1991."
    },
    {
      "key": "2025062720502204000_c25",
      "first-page": "3",
      "article-title": "Bestimmung der Universalh\u00e4rte und anderer Kennwerte an d\u00fcnnen Schichten, insbesondere Hartschoffschichten",
      "volume": "48",
      "author": "Behncke",
      "year": "1993",
      "journal-title": "Harterei-Technische Mittei lungen"
    },
    {
      "key": "2025062720502204000_c26",
      "unstructured": "Bonin, W. A.\n          , US Patent no. 5,553,486, 1996."
    },
    {
      "volume-title": "Product Information: Universal Testing Machine with Hardness Measurement Head",
      "year": "1998",
      "author": "Zwick/Materials Testing",
      "key": "2025062720502204000_c27"
    },
    {
      "key": "2025062720502204000_c28",
      "doi-asserted-by": "crossref",
      "first-page": "847",
      "DOI": "10.1557/JMR.1990.0847",
      "article-title": "Instrumentation of a Conventional Hardness Tester for Load-Displacement Measurement during Indentation",
      "volume": "5",
      "author": "Pharr",
      "year": "1990",
      "journal-title": "Journal of Material Research"
    },
    {
      "key": "2025062720502204000_c29",
      "doi-asserted-by": "crossref",
      "first-page": "1825",
      "DOI": "10.1016/0022-5096(93)90072-N",
      "article-title": "A Phenomenological Theory for Strain Gradient Effects in Plasticity",
      "volume": "41",
      "author": "Fleck",
      "year": "1993",
      "journal-title": "Journal of the Mechanics and Physics of Solids",
      "ISSN": "https://id.crossref.org/issn/0022-5096",
      "issn-type": "print"
    },
    {
      "key": "2025062720502204000_c30",
      "doi-asserted-by": "crossref",
      "first-page": "475",
      "DOI": "10.1016/0956-7151(94)90502-9",
      "article-title": "Strain Gradient Plasticity: Theory and Experiment",
      "volume": "42",
      "author": "Fleck",
      "year": "1994",
      "journal-title": "Acta Metallurgica et Materialia",
      "ISSN": "https://id.crossref.org/issn/0956-7151",
      "issn-type": "print"
    },
    {
      "key": "2025062720502204000_c31",
      "doi-asserted-by": "crossref",
      "first-page": "1345",
      "DOI": "10.1016/0022-5096(94)90001-9",
      "article-title": "Mixed-Mode I/II Fracture Behaviour",
      "volume": "42",
      "author": "Hallb\u00e4ck",
      "year": "1994",
      "journal-title": "Journal of the Mechanics and Physics Solids"
    },
    {
      "key": "2025062720502204000_c32",
      "doi-asserted-by": "crossref",
      "DOI": "10.4159/harvard.9780674731349",
      "volume-title": "Studies in Large Plastic Flow and Fracture",
      "author": "Bridgman",
      "year": "1964"
    },
    {
      "key": "2025062720502204000_c33",
      "doi-asserted-by": "crossref",
      "first-page": "43",
      "DOI": "10.1115/1.3260865",
      "article-title": "Vickers Indentation Curves of Magnesium Oxide (MgO)",
      "volume": "106",
      "author": "Loubet",
      "year": "1984",
      "journal-title": "Journal of Tribology",
      "ISSN": "https://id.crossref.org/issn/0742-4787",
      "issn-type": "print"
    },
    {
      "key": "2025062720502204000_c34",
      "doi-asserted-by": "crossref",
      "first-page": "601",
      "DOI": "10.1557/JMR.1986.0601",
      "article-title": "A Method for Interpreting the Data from Depth-Sensing Indentation Instruments",
      "volume": "1",
      "author": "Doerner",
      "year": "1986",
      "journal-title": "Journal of Material Research"
    },
    {
      "key": "2025062720502204000_c35",
      "doi-asserted-by": "crossref",
      "first-page": "1657",
      "DOI": "10.1016/0020-7683(87)90116-8",
      "article-title": "Elastic Analyses of Some Punch Problems for a Layered Medium",
      "volume": "23",
      "author": "King",
      "year": "1987",
      "journal-title": "International Journal of Solids and Structures",
      "ISSN": "https://id.crossref.org/issn/0020-7683",
      "issn-type": "print"
    },
    {
      "volume-title": "Materials Science and Engineering Handbook",
      "year": "1994",
      "author": "Shackelford",
      "key": "2025062720502204000_c36"
    },
    {
      "key": "2025062720502204000_c37",
      "unstructured": "Faleskog, J. and Nilsson, F., work in progress, 1999."
    },
    {
      "key": "2025062720502204000_c38",
      "doi-asserted-by": "crossref",
      "first-page": "107",
      "DOI": "10.1016/S0020-7403(98)00110-6",
      "article-title": "On Frictional Effects at Inelastic Contact Between Spherical Bodies",
      "volume": "42",
      "author": "Carlsson",
      "year": "1999",
      "journal-title": "International Journal of Mechanical Sciences",
      "ISSN": "https://id.crossref.org/issn/0020-7403",
      "issn-type": "print"
    },
    {
      "volume-title": "ABAQUS Users Manual, Version 5.5",
      "year": "1995",
      "key": "2025062720502204000_c39"
    }
  ],
  "container-title": "Journal of Testing and Evaluation",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://dl.astm.org/jte/article-pdf/29/1/50/133405/10_1520_jte12391j.pdf",
      "content-type": "application/pdf",
      "content-version": "vor",
      "intended-application": "syndication"
    },
    {
      "URL": "https://dl.astm.org/jte/article-pdf/29/1/50/133405/10_1520_jte12391j.pdf",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "similarity-checking"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2025,
        6,
        28
      ]
    ],
    "date-time": "2025-06-28T00:50:32Z",
    "timestamp": 1751071832000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "https://dl.astm.org/jte/article/29/1/50/18837/An-Instrumented-Microindentation-Testing-Device"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        2001,
        1,
        1
      ]
    ]
  },
  "references-count": 39,
  "journal-issue": {
    "issue": "1",
    "published-print": {
      "date-parts": [
        [
          2001,
          1,
          1
        ]
      ]
    }
  },
  "URL": "http://dx.doi.org/10.1520/JTE12391J",
  "relation": {},
  "ISSN": [
    "0090-3973"
  ],
  "subject": [],
  "published": {
    "date-parts": [
      [
        2001,
        1,
        1
      ]
    ]
  }
}