Abstract
Using alkoxides of Y and Ba and Cu-acetate as raw materials, Y Ba2Cu3O7-x (YBCO) superconductive films were produced through the sol-gel method. When the nonaqueous mixed solution was hydrolyzed under an appropriate condition, a pure and homogeneous YBCO powder could be prepared. Controlling the metal concentration and the temperature of the sol, precursor(gel) films were formed on YSZ substrate by dip-coating. And heating the films in the range of 200°-950°C, changes of the films morphologies, the generated phases and the film reactions with the substrates were studied using scanning electron microscopy and X-ray diffraction. It has been known that to improve the superconductivity of the film it is necessary to sinter it at as high as 950°C and increase its thickness over about 3 µm after sintering. A superconductive film with T c.off=75 K was obtained by adopting these conditions.
References
25
Referenced
16
{'volume': 'B64', 'first-page': '189', 'year': '1986', 'key': ''}
(1986)10.1103/PhysRevLett.58.908
/ Phys. Rev. Lett. (1987)10.1143/JJAP.26.L794
/ Jpn. J. Appl. Phys. (1987)10.2109/jcersj.96.373
/ J. Ceram. Soc. Jpn. (1988)10.2109/jcersj.96.459
/ J. Ceram. Soc. Jpn. (1988)10.1143/JJAP.26.L738
/ Jpn. J. Appl. Phys. (1987)10.1143/JJAP.26.L1221
/ Jpn. J. Appl. Phys. (1987){'key': '', 'first-page': '640', 'volume': '59', 'year': '1980', 'journal-title': 'Am. Ceram. Soc. Bull.'}
/ Am. Ceram. Soc. Bull. (1980)10.1016/0022-3093(88)90037-3
/ J. Non-Cryst. Solids (1988)10.2109/jcersj.96.355
/ J. Ceram, Soc. Jpn. (1988)10.1557/JMR.1989.0787
/ J. Mater. Res. (1989){'key': '', 'first-page': '865', 'volume': '35', 'year': '1988', 'journal-title': 'Funtai oyobi Funmatuyaki'}
/ Funtai oyobi Funmatuyaki (1988){'year': '1988', 'key': ''}
(1988){'year': '1989', 'key': ''}
(1989){'year': '1989', 'key': ''}
(1989){'year': '1988', 'key': ''}
(1988)10.2109/jcersj.98.77
/ J. Ceram. Soc. Jpn. (1990){'volume': '96', 'journal-title': 'J. Ceram. Soc. Jpn.', 'year': '1988', 'key': ''}
/ J. Ceram. Soc. Jpn. (1988)10.1143/JJAP.26.L1394
/ Jpn. J. Appl. Phys. (1987)10.2109/jcersj.96.345
/ J. Ceram. Soc. Jpn. (1988)10.2109/jcersj.96.378
/ J. Ceram. Soc. Jpn. (1988)10.1143/JJAP.26.L682
/ Jpn. J. Appl. Phys. (1987){'key': ''}
10.1063/1.99752
/ Appl. Phys. Lett. (1988){'key': ''}
Dates
Type | When |
---|---|
Created | 20 years, 6 months ago (Feb. 22, 2005, 8:56 p.m.) |
Deposited | 2 years, 8 months ago (Dec. 6, 2022, 6:37 p.m.) |
Indexed | 6 months, 1 week ago (Feb. 21, 2025, 5:34 a.m.) |
Issued | 34 years, 2 months ago (July 1, 1991) |
Published | 34 years, 2 months ago (July 1, 1991) |
Published Print | 34 years, 2 months ago (July 1, 1991) |
@article{Masuda_1991, title={Preparation of YBa2Cu3O7-x (YBCO) Superconductive Film Using Sol-Gel Method}, volume={30}, ISSN={1347-4065}, url={http://dx.doi.org/10.1143/jjap.30.1390}, DOI={10.1143/jjap.30.1390}, number={7R}, journal={Japanese Journal of Applied Physics}, publisher={IOP Publishing}, author={Masuda, Yoshio and Tateishi, Tsuyoshi and Matsubara, Kazuo and Rikuro Ogawa, Rikuro Ogawa and Yoshio Kawate, Yoshio Kawate}, year={1991}, month=jul, pages={1390} }