DOI: 10.1111/str.12030. Determination of Ductile Fracture Parameters of a Dual‐Phase Steel by Optical Measurements

Determination of Ductile Fracture Parameters of a Dual‐Phase Steel by Optical Measurements

10.1111/str.12030

Crossref journal-article

Wiley

Strain (311)

Abstract

ABSTRACTMarciniak–Kuczynski and Nakajima tests of the dual‐phase steel Docol 600DL (www.ssab.com/) have been carried out for a range of stress‐states spanning from uniaxial tension to equi‐biaxial tension. The deformation histories of the specimens have been recorded by digital images, and the displacement and strain fields have been determined by post‐processing the images with digital image correlation software. The fracture characteristics of the material are presented by means of the stress triaxiality, the Lode parameter and the equivalent strain. These parameters are evaluated on the surface of the specimens based on the optical field measurements and assumptions regarding the mechanical behaviour of the material. Additionally the minor versus major principal strains up to fracture are presented. It is found that the material displays a significantly lower ductility in plane‐strain tension than in uniaxial tension and equi‐biaxial tension, and that it, in the tests exposed to local necking, undergoes large strains between the onset of necking and fracture. Fractographs of selected specimens reveal that fracture is due to growth and coalescence of voids that occur in localised areas governed by shear‐band instability.

Bibliography

Gruben, G., Vysochinskiy, D., Coudert, T., Reyes, A., & Lademo, O. âG. (2013). Determination of Ductile Fracture Parameters of a DualâPhase Steel by Optical Measurements. Strain, 49(3), 221â232. Portico.

Authors 5

G. Gruben (first)
D. Vysochinskiy (additional)
T. Coudert (additional)
A. Reyes (additional)
O.‐G. Lademo (additional)

References 37 Referenced 15

10.1115/1.3601204
10.1016/0022-5096(69)90033-7
10.1016/j.ijmecsci.2004.02.006
10.1016/j.ijsolstr.2006.09.031
10.1016/j.ijsolstr.2009.05.011
10.1007/BF01400222
10.1016/0262-8856(86)90057-0
10.1111/j.1475-1305.2008.00600.x
10.1111/j.1475-1305.2008.00449.x
10.1111/j.1475-1305.2007.00359.x
Wilkins M. L. Streit R. D.andReaugh J. E.(1980)Cumulative‐strain‐damage model of ductile fracture: simulation and prediction of engineering fracture tests. Technical Report UCRL‐53058. Lawrence Livermore National Laboratory. (10.2172/6628920)
10.1016/0022-5096(83)90017-0
10.1016/0013-7944(85)90052-9
10.1016/S0997-7538(02)00005-0
10.1016/j.ijimpeng.2005.03.008
{'key': 'e_1_2_7_17_1', 'volume-title': 'Studies in Large Plastic Flow and Fracture: With Special Emphasis on the Effects of Hydrostatic Pressure', 'author': 'Bridgman P. W.', 'year': '1952'} / Studies in Large Plastic Flow and Fracture: With Special Emphasis on the Effects of Hydrostatic Pressure by Bridgman P. W. (1952)
10.1016/0022-5096(76)90024-7
10.1016/j.euromechsol.2011.01.004
10.1016/0020-7403(67)90066-5
{'key': 'e_1_2_7_21_1', 'volume-title': 'Metallic Materials—Sheet and Strip—Determination of Forming‐Limit Curves. Part 2: Determination of Forming Limit Curves in the Laboratory', 'author': 'ISO12004‐2', 'year': '2008'} / Metallic Materials—Sheet and Strip—Determination of Forming‐Limit Curves. Part 2: Determination of Forming Limit Curves in the Laboratory by ISO12004‐2 (2008)
SSAB(2009)Docol DP/DL Cold reduced dual phase steels. Swedish Steel AB. Accessed: 27.04.2012.http://www.ssab.com/Global/DOCOL/datasheets_docol/en/201_Docol%20DP%20DL.pdf
10.1243/0954406991522428
{'key': 'e_1_2_7_24_1', 'volume-title': 'version 7.9 (R2009b)', 'author': 'MATLAB', 'year': '2009'} / version 7.9 (R2009b) by MATLAB (2009)
Gruben G.(2012)Ductile fracture in dual‐phase steel. Theoretical experimental and numerical study. PhD thesis Norwegian University of Science and Technology.
{'key': 'e_1_2_7_26_1', 'volume-title': 'Mechanics of Sheet Metal Forming', 'author': 'Hu S. J.', 'year': '2002'} / Mechanics of Sheet Metal Forming by Hu S. J. (2002)
Vysochinskiy D. Coudert T. Reyes A.andLademo O.‐G.(2012)Determination of forming limit strains using Marciniak–Kuczynski tests and automated digital image correlation procedures. Proc. ESAFORM 2012 Erlangen Key Engineering Materials(504–506) 17–22. (10.4028/www.scientific.net/KEM.504-506.17)
10.1016/j.cirp.2010.03.001
10.1201/9781420058215 / Fracture Mechanics; Fundamentals and Applications by Anderson T. L. (2005)
10.1016/j.ijsolstr.2009.12.011
10.1007/978-3-540-88113-1
10.1115/1.4010900 / J. Appl. Mech. / The plasticity of an isotropic aggregate of anisotropic face‐centered cubic crystals by Hershey A. V. (1954)
{'key': 'e_1_2_7_33_1', 'volume-title': 'Metal Forming: Mechanics and Metallurgy', 'author': 'Hosford W. F.', 'year': '1993'} / Metal Forming: Mechanics and Metallurgy by Hosford W. F. (1993)
10.1115/1.3443401
10.1016/j.engfracmech.2007.07.022
10.1016/j.euromechsol.2007.08.002
10.1016/j.ijmecsci.2012.06.009
10.1007/s10704-009-9422-8

Dates

Type	When
Created	12 years, 5 months ago (March 15, 2013, 6:31 p.m.)
Deposited	1 year, 10 months ago (Oct. 8, 2023, 10:49 a.m.)
Indexed	1 year, 10 months ago (Oct. 31, 2023, 1:58 a.m.)
Issued	12 years, 5 months ago (March 15, 2013)
Published	12 years, 5 months ago (March 15, 2013)
Published Online	12 years, 5 months ago (March 15, 2013)
Published Print	12 years, 3 months ago (June 1, 2013)

Funders 0

None

BibTeX

@article{Gruben_2013, title={Determination of Ductile Fracture Parameters of a Dual‐Phase Steel by Optical Measurements}, volume={49}, ISSN={1475-1305}, url={http://dx.doi.org/10.1111/str.12030}, DOI={10.1111/str.12030}, number={3}, journal={Strain}, publisher={Wiley}, author={Gruben, G. and Vysochinskiy, D. and Coudert, T. and Reyes, A. and Lademo, O.‐G.}, year={2013}, month=mar, pages={221–232} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2023,
        10,
        31
      ]
    ],
    "date-time": "2023-10-31T05:58:02Z",
    "timestamp": 1698731882716
  },
  "reference-count": 37,
  "publisher": "Wiley",
  "issue": "3",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            2013,
            3,
            15
          ]
        ],
        "date-time": "2013-03-15T00:00:00Z",
        "timestamp": 1363305600000
      },
      "content-version": "vor",
      "delay-in-days": 0,
      "URL": "http://onlinelibrary.wiley.com/termsAndConditions#vor"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        2013,
        6
      ]
    ]
  },
  "abstract": "<jats:title>ABSTRACT</jats:title><jats:p>Marciniak\u2013Kuczynski and Nakajima tests of the dual\u2010phase steel Docol 600DL (<jats:ext-link xmlns:xlink=\"http://www.w3.org/1999/xlink\" xlink:href=\"http://www.ssab.com/\">www.ssab.com/</jats:ext-link>) have been carried out for a range of stress\u2010states spanning from uniaxial tension to equi\u2010biaxial tension. The deformation histories of the specimens have been recorded by digital images, and the displacement and strain fields have been determined by post\u2010processing the images with digital image correlation software. The fracture characteristics of the material are presented by means of the stress triaxiality, the Lode parameter and the equivalent strain. These parameters are evaluated on the surface of the specimens based on the optical field measurements and assumptions regarding the mechanical behaviour of the material. Additionally the minor versus major principal strains up to fracture are presented. It is found that the material displays a significantly lower ductility in plane\u2010strain tension than in uniaxial tension and equi\u2010biaxial tension, and that it, in the tests exposed to local necking, undergoes large strains between the onset of necking and fracture. Fractographs of selected specimens reveal that fracture is due to growth and coalescence of voids that occur in localised areas governed by shear\u2010band instability.</jats:p>",
  "DOI": "10.1111/str.12030",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2013,
        3,
        15
      ]
    ],
    "date-time": "2013-03-15T22:31:56Z",
    "timestamp": 1363386716000
  },
  "page": "221-232",
  "source": "Crossref",
  "is-referenced-by-count": 15,
  "title": "Determination of Ductile Fracture Parameters of a Dual\u2010Phase Steel by Optical Measurements",
  "prefix": "10.1111",
  "volume": "49",
  "author": [
    {
      "given": "G.",
      "family": "Gruben",
      "sequence": "first",
      "affiliation": [
        {
          "name": "Structural Impact Laboratory (SIMLab), Centre for Research\u2010based Innovation (CRI) and Department of Structural Engineering Norwegian University of Science and Technology  Rich. Birkelands vei 1A NO\u20107491 Trondheim Norway"
        }
      ]
    },
    {
      "given": "D.",
      "family": "Vysochinskiy",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "Structural Impact Laboratory (SIMLab), Centre for Research\u2010based Innovation (CRI) and Department of Structural Engineering Norwegian University of Science and Technology  Rich. Birkelands vei 1A NO\u20107491 Trondheim Norway"
        }
      ]
    },
    {
      "given": "T.",
      "family": "Coudert",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "Structural Impact Laboratory (SIMLab), Centre for Research\u2010based Innovation (CRI) and Department of Structural Engineering Norwegian University of Science and Technology  Rich. Birkelands vei 1A NO\u20107491 Trondheim Norway"
        },
        {
          "name": "Applied Mechanics and Corrosion SINTEF Materials and Chemistry  NO\u20107465 Trondheim Norway"
        }
      ]
    },
    {
      "given": "A.",
      "family": "Reyes",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "Structural Impact Laboratory (SIMLab), Centre for Research\u2010based Innovation (CRI) and Department of Structural Engineering Norwegian University of Science and Technology  Rich. Birkelands vei 1A NO\u20107491 Trondheim Norway"
        }
      ]
    },
    {
      "given": "O.\u2010G.",
      "family": "Lademo",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "Structural Impact Laboratory (SIMLab), Centre for Research\u2010based Innovation (CRI) and Department of Structural Engineering Norwegian University of Science and Technology  Rich. Birkelands vei 1A NO\u20107491 Trondheim Norway"
        },
        {
          "name": "Applied Mechanics and Corrosion SINTEF Materials and Chemistry  NO\u20107465 Trondheim Norway"
        }
      ]
    }
  ],
  "member": "311",
  "published-online": {
    "date-parts": [
      [
        2013,
        3,
        15
      ]
    ]
  },
  "reference": [
    {
      "key": "e_1_2_7_2_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1115/1.3601204"
    },
    {
      "key": "e_1_2_7_3_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/0022-5096(69)90033-7"
    },
    {
      "key": "e_1_2_7_4_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/j.ijmecsci.2004.02.006"
    },
    {
      "key": "e_1_2_7_5_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/j.ijsolstr.2006.09.031"
    },
    {
      "key": "e_1_2_7_6_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/j.ijsolstr.2009.05.011"
    },
    {
      "key": "e_1_2_7_7_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1007/BF01400222"
    },
    {
      "key": "e_1_2_7_8_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/0262-8856(86)90057-0"
    },
    {
      "key": "e_1_2_7_9_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1111/j.1475-1305.2008.00600.x"
    },
    {
      "key": "e_1_2_7_10_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1111/j.1475-1305.2008.00449.x"
    },
    {
      "key": "e_1_2_7_11_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1111/j.1475-1305.2007.00359.x"
    },
    {
      "key": "e_1_2_7_12_1",
      "doi-asserted-by": "crossref",
      "unstructured": "Wilkins M. L. Streit R. D.andReaugh J. E.(1980)Cumulative\u2010strain\u2010damage model of ductile fracture: simulation and prediction of engineering fracture tests. Technical Report UCRL\u201053058. Lawrence Livermore National Laboratory.",
      "DOI": "10.2172/6628920"
    },
    {
      "key": "e_1_2_7_13_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/0022-5096(83)90017-0"
    },
    {
      "key": "e_1_2_7_14_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/0013-7944(85)90052-9"
    },
    {
      "key": "e_1_2_7_15_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/S0997-7538(02)00005-0"
    },
    {
      "key": "e_1_2_7_16_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/j.ijimpeng.2005.03.008"
    },
    {
      "key": "e_1_2_7_17_1",
      "volume-title": "Studies in Large Plastic Flow and Fracture: With Special Emphasis on the Effects of Hydrostatic Pressure",
      "author": "Bridgman P. W.",
      "year": "1952"
    },
    {
      "key": "e_1_2_7_18_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/0022-5096(76)90024-7"
    },
    {
      "key": "e_1_2_7_19_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/j.euromechsol.2011.01.004"
    },
    {
      "key": "e_1_2_7_20_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/0020-7403(67)90066-5"
    },
    {
      "key": "e_1_2_7_21_1",
      "volume-title": "Metallic Materials\u2014Sheet and Strip\u2014Determination of Forming\u2010Limit Curves. Part 2: Determination of Forming Limit Curves in the Laboratory",
      "author": "ISO12004\u20102",
      "year": "2008"
    },
    {
      "key": "e_1_2_7_22_1",
      "unstructured": "SSAB(2009)Docol DP/DL Cold reduced dual phase steels. Swedish Steel AB. Accessed: 27.04.2012.http://www.ssab.com/Global/DOCOL/datasheets_docol/en/201_Docol%20DP%20DL.pdf"
    },
    {
      "key": "e_1_2_7_23_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1243/0954406991522428"
    },
    {
      "key": "e_1_2_7_24_1",
      "volume-title": "version 7.9 (R2009b)",
      "author": "MATLAB",
      "year": "2009"
    },
    {
      "key": "e_1_2_7_25_1",
      "unstructured": "Gruben G.(2012)Ductile fracture in dual\u2010phase steel. Theoretical experimental and numerical study. PhD thesis Norwegian University of Science and Technology."
    },
    {
      "key": "e_1_2_7_26_1",
      "volume-title": "Mechanics of Sheet Metal Forming",
      "author": "Hu S. J.",
      "year": "2002"
    },
    {
      "key": "e_1_2_7_27_1",
      "doi-asserted-by": "crossref",
      "unstructured": "Vysochinskiy D. Coudert T. Reyes A.andLademo O.\u2010G.(2012)Determination of forming limit strains using Marciniak\u2013Kuczynski tests and automated digital image correlation procedures. Proc. ESAFORM 2012 Erlangen Key Engineering Materials(504\u2013506) 17\u201322.",
      "DOI": "10.4028/www.scientific.net/KEM.504-506.17"
    },
    {
      "key": "e_1_2_7_28_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/j.cirp.2010.03.001"
    },
    {
      "key": "e_1_2_7_29_1",
      "doi-asserted-by": "crossref",
      "DOI": "10.1201/9781420058215",
      "volume-title": "Fracture Mechanics; Fundamentals and Applications",
      "author": "Anderson T. L.",
      "year": "2005"
    },
    {
      "key": "e_1_2_7_30_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/j.ijsolstr.2009.12.011"
    },
    {
      "key": "e_1_2_7_31_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1007/978-3-540-88113-1"
    },
    {
      "key": "e_1_2_7_32_1",
      "doi-asserted-by": "crossref",
      "first-page": "241",
      "DOI": "10.1115/1.4010900",
      "article-title": "The plasticity of an isotropic aggregate of anisotropic face\u2010centered cubic crystals",
      "volume": "76",
      "author": "Hershey A. V.",
      "year": "1954",
      "journal-title": "J. Appl. Mech."
    },
    {
      "key": "e_1_2_7_33_1",
      "volume-title": "Metal Forming: Mechanics and Metallurgy",
      "author": "Hosford W. F.",
      "year": "1993"
    },
    {
      "key": "e_1_2_7_34_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1115/1.3443401"
    },
    {
      "key": "e_1_2_7_35_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/j.engfracmech.2007.07.022"
    },
    {
      "key": "e_1_2_7_36_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/j.euromechsol.2007.08.002"
    },
    {
      "key": "e_1_2_7_37_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/j.ijmecsci.2012.06.009"
    },
    {
      "key": "e_1_2_7_38_1",
      "doi-asserted-by": "publisher",
      "DOI": "10.1007/s10704-009-9422-8"
    }
  ],
  "container-title": "Strain",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://api.wiley.com/onlinelibrary/tdm/v1/articles/10.1111%2Fstr.12030",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "https://onlinelibrary.wiley.com/doi/pdf/10.1111/str.12030",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "similarity-checking"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2023,
        10,
        8
      ]
    ],
    "date-time": "2023-10-08T14:49:59Z",
    "timestamp": 1696776599000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "https://onlinelibrary.wiley.com/doi/10.1111/str.12030"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        2013,
        3,
        15
      ]
    ]
  },
  "references-count": 37,
  "journal-issue": {
    "issue": "3",
    "published-print": {
      "date-parts": [
        [
          2013,
          6
        ]
      ]
    }
  },
  "alternative-id": [
    "10.1111/str.12030"
  ],
  "URL": "http://dx.doi.org/10.1111/str.12030",
  "relation": {},
  "ISSN": [
    "0039-2103",
    "1475-1305"
  ],
  "subject": [],
  "container-title-short": "Strain",
  "published": {
    "date-parts": [
      [
        2013,
        3,
        15
      ]
    ]
  }
}