DOI: 10.1111/j.1460-2695.1994.tb01410.x. ANALYSIS OF CRACK TIP HYDROGEN DISTRIBUTION UNDER I/II MIXED MODE LOADS

ANALYSIS OF CRACK TIP HYDROGEN DISTRIBUTION UNDER I/II MIXED MODE LOADS

10.1111/j.1460-2695.1994.tb01410.x

Crossref journal-article

Wiley

Fatigue & Fracture of Engineering Materials & Structures (311)

Abstract

Abstract— The distribution of hydrogen in the vicinity of a crack tip was studied using SIMS (Secondary Ion Mass Spectrometry) under different ratios of I/II mixed mode loads. Modified WOL specimens with kinked slits were employed in the course of the experimental work. Spectrographic measurements show that under I/II mixed mode loading, both in the HIC and in the rmaxp directions, there are two hydrogen accumulation peaks ahead of the crack tip, corresponding to the location of the maximum hydrostatic stress and maximum equivalent plastic strain, respectively. Based on results obtained over a range of loading conditions from mode I to a high KII/ KI, ratio, it is shown that the mode II component has a clear influence on both peaks. The conditions for hydrogen redistribution are discussed in terms of crack tip stress‐strain fields.

Bibliography

Gao, H., Cao, W., Fang, C., & de los Rios, E. R. (1994). ANALYSIS OF CRACK TIP HYDROGEN DISTRIBUTION UNDER I/II MIXED MODE LOADS. Fatigue & Fracture of Engineering Materials & Structures, 17(10), 1213â1220. Portico.

Authors 4

H. Gao (first)
W. Cao (additional)
C. Fang (additional)
E. R. de los Rios (additional)

References 12 Referenced 18

{'key': 'e_1_2_1_2_2', 'first-page': '528', 'article-title': 'Hydrogen crack initiation and delayed failure in steel', 'volume': '212', 'author': 'Johnson H. H.', 'year': '1958', 'journal-title': 'Trans. Met. Soc. AIME'} / Trans. Met. Soc. AIME / Hydrogen crack initiation and delayed failure in steel by Johnson H. H. (1958)
10.2355/isijinternational1966.15.503 / Trans. ISIJ / Formulation of stress (strain) induced diffusion of hydrogen and its solution by computer aided finite element method by Ochiai S. I. (1975)
{'key': 'e_1_2_1_4_2', 'first-page': '254', 'volume-title': 'Hydrogen embrittlement of high‐strength steel', 'author': 'Yamakawa K.', 'year': '1984'} / Hydrogen embrittlement of high‐strength steel by Yamakawa K. (1984)
10.1007/BF02643992
{'key': 'e_1_2_1_6_2', 'first-page': '102', 'article-title': 'The effect of stress on hydrogen redistribution in iron', 'volume': '6', 'author': 'Protsiu I. M.', 'year': '1982', 'journal-title': 'Fiz. Khim. Mekh. Mater.'} / Fiz. Khim. Mekh. Mater. / The effect of stress on hydrogen redistribution in iron by Protsiu I. M. (1982)
R. L.SchulteandP. N.Adler(1982)Evaluation of stress‐induced hydrogen and deuterium redistribution in titanium alloys using nuclear reaction analysis. In:Advanced Techniques for Characterising Hydrogen in Metals Proc. Conf. Louis Ville Ky Metallurgical Society AIME (Edited byN. F.FloreandB. J.Berkowitz) pp.233–244.
{'key': 'e_1_2_1_8_2', 'first-page': 'A86', 'article-title': 'Distribution of hydrogen concentration near notch tip under mode I loading', 'volume': '26', 'author': 'Shiding Wu', 'year': '1990', 'journal-title': 'Acta Metall. Sinica'} / Acta Metall. Sinica / Distribution of hydrogen concentration near notch tip under mode I loading by Shiding Wu (1990)
{'key': 'e_1_2_1_9_2', 'volume-title': 'The Stress Analysis of Cracks Handbook', 'author': 'Tada H.', 'year': '1973'} / The Stress Analysis of Cracks Handbook by Tada H. (1973)
10.1016/0013-7944(75)90052-1
{'key': 'e_1_2_1_11_2', 'first-page': '279', 'article-title': '(I+ II) mixed mode hydrogen induced cracking', 'volume': '7', 'author': 'Hua Gao', 'year': '1989', 'journal-title': 'Acta Metall. Sinica'} / Acta Metall. Sinica / (I+ II) mixed mode hydrogen induced cracking by Hua Gao (1989)
10.1016/0022-5096(87)90046-9
10.1016/0001-6160(78)90092-5

Dates

Type	When
Created	18 years, 4 months ago (April 2, 2007, 8:17 p.m.)
Deposited	1 year, 9 months ago (Oct. 24, 2023, 2:19 p.m.)
Indexed	3 weeks, 6 days ago (July 25, 2025, 6:54 a.m.)
Issued	30 years, 10 months ago (Oct. 1, 1994)
Published	30 years, 10 months ago (Oct. 1, 1994)
Published Online	18 years, 4 months ago (April 2, 2007)
Published Print	30 years, 10 months ago (Oct. 1, 1994)

Funders 0

None

BibTeX

@article{Gao_1994, title={ANALYSIS OF CRACK TIP HYDROGEN DISTRIBUTION UNDER I/II MIXED MODE LOADS}, volume={17}, ISSN={1460-2695}, url={http://dx.doi.org/10.1111/j.1460-2695.1994.tb01410.x}, DOI={10.1111/j.1460-2695.1994.tb01410.x}, number={10}, journal={Fatigue & Fracture of Engineering Materials & Structures}, publisher={Wiley}, author={Gao, H. and Cao, W. and Fang, C. and de los Rios, E. R.}, year={1994}, month=oct, pages={1213–1220} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2025,
        7,
        25
      ]
    ],
    "date-time": "2025-07-25T10:54:49Z",
    "timestamp": 1753440889264
  },
  "reference-count": 12,
  "publisher": "Wiley",
  "issue": "10",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            2007,
            4,
            2
          ]
        ],
        "date-time": "2007-04-02T00:00:00Z",
        "timestamp": 1175472000000
      },
      "content-version": "vor",
      "delay-in-days": 4566,
      "URL": "http://onlinelibrary.wiley.com/termsAndConditions#vor"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        1994,
        10
      ]
    ]
  },
  "abstract": "<jats:p><jats:bold>Abstract\u2014</jats:bold> The distribution of hydrogen in the vicinity of a crack tip was studied using SIMS (Secondary Ion Mass Spectrometry) under different ratios of I/II mixed mode loads. Modified WOL specimens with kinked slits were employed in the course of the experimental work. Spectrographic measurements show that under I/II mixed mode loading, both in the HIC and in the <jats:italic>r</jats:italic><jats:sup>max</jats:sup><jats:sub>p</jats:sub> directions, there are two hydrogen accumulation peaks ahead of the crack tip, corresponding to the location of the maximum hydrostatic stress and maximum equivalent plastic strain, respectively. Based on results obtained over a range of loading conditions from mode I to a high K<jats:sub>II</jats:sub>/ K<jats:sub>I</jats:sub>, ratio, it is shown that the mode II component has a clear influence on both peaks. The conditions for hydrogen redistribution are discussed in terms of crack tip stress\u2010strain fields.</jats:p>",
  "DOI": "10.1111/j.1460-2695.1994.tb01410.x",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2007,
        4,
        3
      ]
    ],
    "date-time": "2007-04-03T00:17:12Z",
    "timestamp": 1175559432000
  },
  "page": "1213-1220",
  "source": "Crossref",
  "is-referenced-by-count": 18,
  "title": "ANALYSIS OF CRACK TIP HYDROGEN DISTRIBUTION UNDER I/II MIXED MODE LOADS",
  "prefix": "10.1111",
  "volume": "17",
  "author": [
    {
      "given": "H.",
      "family": "Gao",
      "sequence": "first",
      "affiliation": []
    },
    {
      "given": "W.",
      "family": "Cao",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "C.",
      "family": "Fang",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "E. R.",
      "family": "de los Rios",
      "sequence": "additional",
      "affiliation": []
    }
  ],
  "member": "311",
  "published-online": {
    "date-parts": [
      [
        2007,
        4,
        2
      ]
    ]
  },
  "reference": [
    {
      "key": "e_1_2_1_2_2",
      "first-page": "528",
      "article-title": "Hydrogen crack initiation and delayed failure in steel",
      "volume": "212",
      "author": "Johnson H. H.",
      "year": "1958",
      "journal-title": "Trans. Met. Soc. AIME"
    },
    {
      "key": "e_1_2_1_3_2",
      "doi-asserted-by": "crossref",
      "first-page": "503",
      "DOI": "10.2355/isijinternational1966.15.503",
      "article-title": "Formulation of stress (strain) induced diffusion of hydrogen and its solution by computer aided finite element method",
      "volume": "15",
      "author": "Ochiai S. I.",
      "year": "1975",
      "journal-title": "Trans. ISIJ"
    },
    {
      "key": "e_1_2_1_4_2",
      "first-page": "254",
      "volume-title": "Hydrogen embrittlement of high\u2010strength steel",
      "author": "Yamakawa K.",
      "year": "1984"
    },
    {
      "key": "e_1_2_1_5_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1007/BF02643992"
    },
    {
      "key": "e_1_2_1_6_2",
      "first-page": "102",
      "article-title": "The effect of stress on hydrogen redistribution in iron",
      "volume": "6",
      "author": "Protsiu I. M.",
      "year": "1982",
      "journal-title": "Fiz. Khim. Mekh. Mater."
    },
    {
      "key": "e_1_2_1_7_2",
      "unstructured": "R. L.SchulteandP. N.Adler(1982)Evaluation of stress\u2010induced hydrogen and deuterium redistribution in titanium alloys using nuclear reaction analysis. In:Advanced Techniques for Characterising Hydrogen in Metals Proc. Conf. Louis Ville Ky Metallurgical Society AIME (Edited byN. F.FloreandB. J.Berkowitz) pp.233\u2013244."
    },
    {
      "key": "e_1_2_1_8_2",
      "first-page": "A86",
      "article-title": "Distribution of hydrogen concentration near notch tip under mode I loading",
      "volume": "26",
      "author": "Shiding Wu",
      "year": "1990",
      "journal-title": "Acta Metall. Sinica"
    },
    {
      "key": "e_1_2_1_9_2",
      "volume-title": "The Stress Analysis of Cracks Handbook",
      "author": "Tada H.",
      "year": "1973"
    },
    {
      "key": "e_1_2_1_10_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/0013-7944(75)90052-1"
    },
    {
      "key": "e_1_2_1_11_2",
      "first-page": "279",
      "article-title": "(I+ II) mixed mode hydrogen induced cracking",
      "volume": "7",
      "author": "Hua Gao",
      "year": "1989",
      "journal-title": "Acta Metall. Sinica"
    },
    {
      "key": "e_1_2_1_12_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/0022-5096(87)90046-9"
    },
    {
      "key": "e_1_2_1_13_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/0001-6160(78)90092-5"
    }
  ],
  "container-title": "Fatigue &amp; Fracture of Engineering Materials &amp; Structures",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://api.wiley.com/onlinelibrary/tdm/v1/articles/10.1111%2Fj.1460-2695.1994.tb01410.x",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "https://onlinelibrary.wiley.com/doi/pdf/10.1111/j.1460-2695.1994.tb01410.x",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "similarity-checking"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2023,
        10,
        24
      ]
    ],
    "date-time": "2023-10-24T18:19:05Z",
    "timestamp": 1698171545000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "https://onlinelibrary.wiley.com/doi/10.1111/j.1460-2695.1994.tb01410.x"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        1994,
        10
      ]
    ]
  },
  "references-count": 12,
  "journal-issue": {
    "issue": "10",
    "published-print": {
      "date-parts": [
        [
          1994,
          10
        ]
      ]
    }
  },
  "alternative-id": [
    "10.1111/j.1460-2695.1994.tb01410.x"
  ],
  "URL": "http://dx.doi.org/10.1111/j.1460-2695.1994.tb01410.x",
  "relation": {},
  "ISSN": [
    "8756-758X",
    "1460-2695"
  ],
  "subject": [],
  "container-title-short": "Fatigue Fract Eng Mat Struct",
  "published": {
    "date-parts": [
      [
        1994,
        10
      ]
    ]
  }
}