DOI: 10.1111/j.1151-2916.2004.tb07747.x. Effect of Sintering Additive Composition on the Processing and Thermal Conductivity of Sintered Reaction‐Bonded Si<sub>3</sub>N<sub>4</sub>

Effect of Sintering Additive Composition on the Processing and Thermal Conductivity of Sintered Reaction‐Bonded Si3N4

10.1111/j.1151-2916.2004.tb07747.x

Crossref journal-article

Wiley

Journal of the American Ceramic Society (311)

Abstract

Two compositions of the Y2O3–MgO (YM) and Yb2O3–MgO (YbM) systems were chosen to study the effect of the sintering additive composition on the processing and thermal conductivity of sintered reaction‐bonded silicon nitride (SRBSN). The nitridation, postdensification, microstructural evolution, and thermal conductivity of SRBSN were found to depend strongly on the sintering additive composition. The RBSN materials with YbM exhibited a poor sinterability, whereas those with YM exhibited an excellent sinterability. However, the SRBSN materials with YbM showed a higher thermal conductivity than those with YM. This was associated primarily with the isolated distribution and lower amount of secondary phase and the higher percentage of large grains in the former materials.

Bibliography

Zhu, X., Zhou, Y., & Hirao, K. (2004). Effect of Sintering Additive Composition on the Processing and Thermal Conductivity of Sintered ReactionâBonded Si3N4. Journal of the American Ceramic Society, 87(7), 1398â1400. Portico.

Authors 3

Xinwen Zhu (first)
You Zhou (additional)
Kiyoshi Hirao (additional)

References 17 Referenced 60

10.1002/9780470314715.ch52
10.1111/j.1151-2916.1996.tb09002.x
10.1557/JMR.1999.0206
10.1111/j.1151-2916.2001.tb00662.x
10.1111/j.1151-2916.2001.tb01141.x
10.1016/S0955-2219(02)00292-3
10.1002/9780470314050.ch37
10.1002/9780470314821.ch41
10.1007/BF00729365
10.1111/j.1151-2916.1996.tb08721.x
10.1007/BF00551961
10.1007/BF01113761
{'issue': '353', 'key': 'e_1_2_1_14_2', 'first-page': '16', 'article-title': 'Thermal Conductivity of Ceramic Refractory Materials; Calculation from Thermal Conductivities of Constituents', 'volume': '3', 'author': 'Eucken A.', 'year': '1932', 'journal-title': 'Forsch. Gebiete Ingenieurw.'} / Forsch. Gebiete Ingenieurw. / Thermal Conductivity of Ceramic Refractory Materials; Calculation from Thermal Conductivities of Constituents by Eucken A. (1932)
10.1111/j.1151-2916.2000.tb01501.x
10.1111/j.1151-2916.1996.tb08549.x
10.1016/S0921-5093(01)01936-0
10.1111/j.1151-2916.2002.tb00066.x

Dates

Type	When
Created	20 years, 5 months ago (March 11, 2005, 5:40 a.m.)
Deposited	1 year, 9 months ago (Nov. 23, 2023, 6:59 a.m.)
Indexed	1 year ago (Aug. 2, 2024, 5:46 a.m.)
Issued	21 years, 1 month ago (July 1, 2004)
Published	21 years, 1 month ago (July 1, 2004)
Published Online	20 years, 5 months ago (March 11, 2005)
Published Print	21 years, 1 month ago (July 1, 2004)

Funders 0

None

BibTeX

@article{Zhu_2004, title={Effect of Sintering Additive Composition on the Processing and Thermal Conductivity of Sintered Reaction‐Bonded Si3N4}, volume={87}, ISSN={1551-2916}, url={http://dx.doi.org/10.1111/j.1151-2916.2004.tb07747.x}, DOI={10.1111/j.1151-2916.2004.tb07747.x}, number={7}, journal={Journal of the American Ceramic Society}, publisher={Wiley}, author={Zhu, Xinwen and Zhou, You and Hirao, Kiyoshi}, year={2004}, month=jul, pages={1398–1400} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2024,
        8,
        2
      ]
    ],
    "date-time": "2024-08-02T09:46:57Z",
    "timestamp": 1722592017499
  },
  "reference-count": 17,
  "publisher": "Wiley",
  "issue": "7",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            2005,
            3,
            11
          ]
        ],
        "date-time": "2005-03-11T00:00:00Z",
        "timestamp": 1110499200000
      },
      "content-version": "vor",
      "delay-in-days": 253,
      "URL": "http://onlinelibrary.wiley.com/termsAndConditions#vor"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        2004,
        7
      ]
    ]
  },
  "abstract": "<jats:p>Two compositions of the Y<jats:sub>2</jats:sub>O<jats:sub>3</jats:sub>\u2013MgO (YM) and Yb<jats:sub>2</jats:sub>O<jats:sub>3</jats:sub>\u2013MgO (YbM) systems were chosen to study the effect of the sintering additive composition on the processing and thermal conductivity of sintered reaction\u2010bonded silicon nitride (SRBSN). The nitridation, postdensification, microstructural evolution, and thermal conductivity of SRBSN were found to depend strongly on the sintering additive composition. The RBSN materials with YbM exhibited a poor sinterability, whereas those with YM exhibited an excellent sinterability. However, the SRBSN materials with YbM showed a higher thermal conductivity than those with YM. This was associated primarily with the isolated distribution and lower amount of secondary phase and the higher percentage of large grains in the former materials.</jats:p>",
  "DOI": "10.1111/j.1151-2916.2004.tb07747.x",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2005,
        3,
        11
      ]
    ],
    "date-time": "2005-03-11T10:40:43Z",
    "timestamp": 1110537643000
  },
  "page": "1398-1400",
  "source": "Crossref",
  "is-referenced-by-count": 60,
  "title": "Effect of Sintering Additive Composition on the Processing and Thermal Conductivity of Sintered Reaction\u2010Bonded Si<sub>3</sub>N<sub>4</sub>",
  "prefix": "10.1111",
  "volume": "87",
  "author": [
    {
      "given": "Xinwen",
      "family": "Zhu",
      "sequence": "first",
      "affiliation": []
    },
    {
      "given": "You",
      "family": "Zhou",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "Kiyoshi",
      "family": "Hirao",
      "sequence": "additional",
      "affiliation": []
    }
  ],
  "member": "311",
  "published-online": {
    "date-parts": [
      [
        2005,
        3,
        11
      ]
    ]
  },
  "reference": [
    {
      "key": "e_1_2_1_2_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1002/9780470314715.ch52"
    },
    {
      "key": "e_1_2_1_3_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1111/j.1151-2916.1996.tb09002.x"
    },
    {
      "key": "e_1_2_1_4_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1557/JMR.1999.0206"
    },
    {
      "key": "e_1_2_1_5_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1111/j.1151-2916.2001.tb00662.x"
    },
    {
      "key": "e_1_2_1_6_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1111/j.1151-2916.2001.tb01141.x"
    },
    {
      "key": "e_1_2_1_7_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/S0955-2219(02)00292-3"
    },
    {
      "key": "e_1_2_1_8_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1002/9780470314050.ch37"
    },
    {
      "key": "e_1_2_1_9_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1002/9780470314821.ch41"
    },
    {
      "key": "e_1_2_1_10_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1007/BF00729365"
    },
    {
      "key": "e_1_2_1_11_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1111/j.1151-2916.1996.tb08721.x"
    },
    {
      "key": "e_1_2_1_12_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1007/BF00551961"
    },
    {
      "key": "e_1_2_1_13_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1007/BF01113761"
    },
    {
      "issue": "353",
      "key": "e_1_2_1_14_2",
      "first-page": "16",
      "article-title": "Thermal Conductivity of Ceramic Refractory Materials; Calculation from Thermal Conductivities of Constituents",
      "volume": "3",
      "author": "Eucken A.",
      "year": "1932",
      "journal-title": "Forsch. Gebiete Ingenieurw."
    },
    {
      "key": "e_1_2_1_15_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1111/j.1151-2916.2000.tb01501.x"
    },
    {
      "key": "e_1_2_1_16_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1111/j.1151-2916.1996.tb08549.x"
    },
    {
      "key": "e_1_2_1_17_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/S0921-5093(01)01936-0"
    },
    {
      "key": "e_1_2_1_18_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1111/j.1151-2916.2002.tb00066.x"
    }
  ],
  "container-title": "Journal of the American Ceramic Society",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://api.wiley.com/onlinelibrary/tdm/v1/articles/10.1111%2Fj.1151-2916.2004.tb07747.x",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "http://onlinelibrary.wiley.com/wol1/doi/10.1111/j.1151-2916.2004.tb07747.x/fullpdf",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "similarity-checking"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2023,
        11,
        23
      ]
    ],
    "date-time": "2023-11-23T11:59:20Z",
    "timestamp": 1700740760000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "https://ceramics.onlinelibrary.wiley.com/doi/10.1111/j.1151-2916.2004.tb07747.x"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        2004,
        7
      ]
    ]
  },
  "references-count": 17,
  "journal-issue": {
    "issue": "7",
    "published-print": {
      "date-parts": [
        [
          2004,
          7
        ]
      ]
    }
  },
  "alternative-id": [
    "10.1111/j.1151-2916.2004.tb07747.x"
  ],
  "URL": "http://dx.doi.org/10.1111/j.1151-2916.2004.tb07747.x",
  "relation": {},
  "ISSN": [
    "0002-7820",
    "1551-2916"
  ],
  "subject": [],
  "container-title-short": "Journal of the American Ceramic Society",
  "published": {
    "date-parts": [
      [
        2004,
        7
      ]
    ]
  }
}