DOI: 10.1111/j.1151-2916.1990.tb06556.x. Median Cracking of Brittle Solids Due to Scribing with Sharp Indenters

Median Cracking of Brittle Solids Due to Scribing with Sharp Indenters

10.1111/j.1151-2916.1990.tb06556.x

Crossref journal-article

Wiley

Journal of the American Ceramic Society (311)

Abstract

The process of moving a loaded hard indenter across the surface of a brittle solid to produce a median crack is referred to as “scribing.” As a first step in predicting the depth of median cracking due to sharp indenters, an approximate plastic plane strain analysis is presented for the region under the indenter. This allows the horizontal force transverse to the scribing direction to be predicted. Taking this force and an approximate solution for the stress intensity factor for the crack geometry in scribing leads to a prediction for crack depth as a function of load. The residual stresses which arise on unloading are shown to be a strong function of indenter geometry and may act to extend or partially close the original median crack formed during loading. Reasonable agreement is found between prediction and experiment for six indenter configurations.

Bibliography

Cheng, W., Ling, E., & Finnle, I. (1990). Median Cracking of Brittle Solids Due to Scribing with Sharp Indenters. Journal of the American Ceramic Society, 73(3), 580â586. Portico.

Authors 3

Weilli Cheng (first)
Elizabeth Ling (additional)
Iain Finnle (additional)

References 19 Referenced 15

{'key': 'e_1_2_1_2_2', 'first-page': '383', 'article-title': '“The Effect of Transverse Scratches on the Strength of Sheet Glass,”', 'volume': '21', 'author': 'Holland A. J.', 'year': '1937', 'journal-title': 'J. Soc. Glass Technol.'} / J. Soc. Glass Technol. / “The Effect of Transverse Scratches on the Strength of Sheet Glass,” by Holland A. J. (1937)
10.1098/rspa.1964.0114
10.1098/rspa.1979.0070
10.1063/1.329930
10.1016/0043-1648(77)90021-7
10.1080/01418618208236917
10.1007/BF00557479
{'issue': '5', 'key': 'e_1_2_1_9_2', 'first-page': '222', 'article-title': '“Median Crack Initiation and Propagation Beneath a Disc Glass Cutter,”', 'volume': '22', 'author': 'Swain M. V.', 'year': '1981', 'journal-title': 'Glass Technol.'} / Glass Technol. / “Median Crack Initiation and Propagation Beneath a Disc Glass Cutter,” by Swain M. V. (1981)
{'key': 'e_1_2_1_10_2', 'first-page': '333', 'article-title': '“Brittle Fracture and Microplasticity of Glass in Indentation Experiments”', 'volume': '37', 'author': 'Peter K.', 'year': '1964', 'journal-title': 'Glastech. Ber.'} / Glastech. Ber. / “Brittle Fracture and Microplasticity of Glass in Indentation Experiments” by Peter K. (1964)
10.1111/j.1151-2916.1974.tb10863.x
{'key': 'e_1_2_1_12_2', 'first-page': '320', 'article-title': '“Scratching Experiments on Various Ceramic Materials,”', 'volume': '30', 'author': 'Groenou A. Broese', 'year': '1975', 'journal-title': 'Phillips Res. Rep.'} / Phillips Res. Rep. / “Scratching Experiments on Various Ceramic Materials,” by Groenou A. Broese (1975)
10.1007/978-1-4615-7017-2_17
10.1007/978-1-4613-3488-0_9
10.1007/BF00610624
10.1016/0043-1648(81)90210-6
10.1111/j.1151-2916.1980.tb10768.x
{'key': 'e_1_2_1_18_2', 'first-page': '133', 'volume-title': 'Theory of Elasticity', 'author': 'Timoshenko S. P.', 'year': '1970'} / Theory of Elasticity by Timoshenko S. P. (1970)
{'key': 'e_1_2_1_19_2', 'volume-title': 'Handbook of Glass Properties', 'author': 'Bansal N. P.', 'year': '1988'} / Handbook of Glass Properties by Bansal N. P. (1988)
{'key': 'e_1_2_1_20_2', 'volume-title': 'Compendium of Stress Intensity Factors', 'author': 'Rooke D. P.', 'year': '1976'} / Compendium of Stress Intensity Factors by Rooke D. P. (1976)

Dates

Type	When
Created	20 years, 5 months ago (March 8, 2005, 12:47 p.m.)
Deposited	1 year, 9 months ago (Nov. 22, 2023, 6:08 p.m.)
Indexed	1 year, 9 months ago (Nov. 23, 2023, 6:16 p.m.)
Issued	35 years, 6 months ago (March 1, 1990)
Published	35 years, 6 months ago (March 1, 1990)
Published Online	20 years, 5 months ago (March 8, 2005)
Published Print	35 years, 6 months ago (March 1, 1990)

Funders 0

None

BibTeX

@article{Cheng_1990, title={Median Cracking of Brittle Solids Due to Scribing with Sharp Indenters}, volume={73}, ISSN={1551-2916}, url={http://dx.doi.org/10.1111/j.1151-2916.1990.tb06556.x}, DOI={10.1111/j.1151-2916.1990.tb06556.x}, number={3}, journal={Journal of the American Ceramic Society}, publisher={Wiley}, author={Cheng, Weilli and Ling, Elizabeth and Finnle, Iain}, year={1990}, month=mar, pages={580–586} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2023,
        11,
        23
      ]
    ],
    "date-time": "2023-11-23T23:16:50Z",
    "timestamp": 1700781410004
  },
  "reference-count": 19,
  "publisher": "Wiley",
  "issue": "3",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            2005,
            3,
            8
          ]
        ],
        "date-time": "2005-03-08T00:00:00Z",
        "timestamp": 1110240000000
      },
      "content-version": "vor",
      "delay-in-days": 5486,
      "URL": "http://onlinelibrary.wiley.com/termsAndConditions#vor"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        1990,
        3
      ]
    ]
  },
  "abstract": "<jats:p>The process of moving a loaded hard indenter across the surface of a brittle solid to produce a median crack is referred to as \u201cscribing.\u201d As a first step in predicting the depth of median cracking due to sharp indenters, an approximate plastic plane strain analysis is presented for the region under the indenter. This allows the horizontal force transverse to the scribing direction to be predicted. Taking this force and an approximate solution for the stress intensity factor for the crack geometry in scribing leads to a prediction for crack depth as a function of load. The residual stresses which arise on unloading are shown to be a strong function of indenter geometry and may act to extend or partially close the original median crack formed during loading. Reasonable agreement is found between prediction and experiment for six indenter configurations.</jats:p>",
  "DOI": "10.1111/j.1151-2916.1990.tb06556.x",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2005,
        3,
        8
      ]
    ],
    "date-time": "2005-03-08T17:47:39Z",
    "timestamp": 1110304059000
  },
  "page": "580-586",
  "source": "Crossref",
  "is-referenced-by-count": 15,
  "title": "Median Cracking of Brittle Solids Due to Scribing with Sharp Indenters",
  "prefix": "10.1111",
  "volume": "73",
  "author": [
    {
      "given": "Weilli",
      "family": "Cheng",
      "sequence": "first",
      "affiliation": []
    },
    {
      "given": "Elizabeth",
      "family": "Ling",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "Iain",
      "family": "Finnle",
      "sequence": "additional",
      "affiliation": []
    }
  ],
  "member": "311",
  "published-online": {
    "date-parts": [
      [
        2005,
        3,
        8
      ]
    ]
  },
  "reference": [
    {
      "key": "e_1_2_1_2_2",
      "first-page": "383",
      "article-title": "\u201cThe Effect of Transverse Scratches on the Strength of Sheet Glass,\u201d",
      "volume": "21",
      "author": "Holland A. J.",
      "year": "1937",
      "journal-title": "J. Soc. Glass Technol."
    },
    {
      "key": "e_1_2_1_3_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1098/rspa.1964.0114"
    },
    {
      "key": "e_1_2_1_4_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1098/rspa.1979.0070"
    },
    {
      "key": "e_1_2_1_5_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1063/1.329930"
    },
    {
      "key": "e_1_2_1_6_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/0043-1648(77)90021-7"
    },
    {
      "key": "e_1_2_1_7_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1080/01418618208236917"
    },
    {
      "key": "e_1_2_1_8_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1007/BF00557479"
    },
    {
      "issue": "5",
      "key": "e_1_2_1_9_2",
      "first-page": "222",
      "article-title": "\u201cMedian Crack Initiation and Propagation Beneath a Disc Glass Cutter,\u201d",
      "volume": "22",
      "author": "Swain M. V.",
      "year": "1981",
      "journal-title": "Glass Technol."
    },
    {
      "key": "e_1_2_1_10_2",
      "first-page": "333",
      "article-title": "\u201cBrittle Fracture and Microplasticity of Glass in Indentation Experiments\u201d",
      "volume": "37",
      "author": "Peter K.",
      "year": "1964",
      "journal-title": "Glastech. Ber."
    },
    {
      "key": "e_1_2_1_11_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1111/j.1151-2916.1974.tb10863.x"
    },
    {
      "key": "e_1_2_1_12_2",
      "first-page": "320",
      "article-title": "\u201cScratching Experiments on Various Ceramic Materials,\u201d",
      "volume": "30",
      "author": "Groenou A. Broese",
      "year": "1975",
      "journal-title": "Phillips Res. Rep."
    },
    {
      "key": "e_1_2_1_13_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1007/978-1-4615-7017-2_17"
    },
    {
      "key": "e_1_2_1_14_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1007/978-1-4613-3488-0_9"
    },
    {
      "key": "e_1_2_1_15_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1007/BF00610624"
    },
    {
      "key": "e_1_2_1_16_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1016/0043-1648(81)90210-6"
    },
    {
      "key": "e_1_2_1_17_2",
      "doi-asserted-by": "publisher",
      "DOI": "10.1111/j.1151-2916.1980.tb10768.x"
    },
    {
      "key": "e_1_2_1_18_2",
      "first-page": "133",
      "volume-title": "Theory of Elasticity",
      "author": "Timoshenko S. P.",
      "year": "1970"
    },
    {
      "key": "e_1_2_1_19_2",
      "volume-title": "Handbook of Glass Properties",
      "author": "Bansal N. P.",
      "year": "1988"
    },
    {
      "key": "e_1_2_1_20_2",
      "volume-title": "Compendium of Stress Intensity Factors",
      "author": "Rooke D. P.",
      "year": "1976"
    }
  ],
  "container-title": "Journal of the American Ceramic Society",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://api.wiley.com/onlinelibrary/tdm/v1/articles/10.1111%2Fj.1151-2916.1990.tb06556.x",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "http://onlinelibrary.wiley.com/wol1/doi/10.1111/j.1151-2916.1990.tb06556.x/fullpdf",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "similarity-checking"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2023,
        11,
        22
      ]
    ],
    "date-time": "2023-11-22T23:08:41Z",
    "timestamp": 1700694521000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "https://ceramics.onlinelibrary.wiley.com/doi/10.1111/j.1151-2916.1990.tb06556.x"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        1990,
        3
      ]
    ]
  },
  "references-count": 19,
  "journal-issue": {
    "issue": "3",
    "published-print": {
      "date-parts": [
        [
          1990,
          3
        ]
      ]
    }
  },
  "alternative-id": [
    "10.1111/j.1151-2916.1990.tb06556.x"
  ],
  "URL": "http://dx.doi.org/10.1111/j.1151-2916.1990.tb06556.x",
  "relation": {},
  "ISSN": [
    "0002-7820",
    "1551-2916"
  ],
  "subject": [],
  "container-title-short": "Journal of the American Ceramic Society",
  "published": {
    "date-parts": [
      [
        1990,
        3
      ]
    ]
  }
}