DOI: 10.1063/1.3184792. Glassy steel optimized for glass-forming ability and toughness

Glassy steel optimized for glass-forming ability and toughness

10.1063/1.3184792

Crossref journal-article

AIP Publishing

Applied Physics Letters (317)

Abstract

An alloy development strategy coupled with toughness assessments and ultrasonic measurements is implemented to design a series of iron-based glass-forming alloys that demonstrate improved glass-forming ability and toughness. The combination of good glass-forming ability and high toughness demonstrated by the present alloys is uncommon in Fe-based systems, and is attributed to the ability of these compositions to form stable glass configurations associated with low activation barriers for shear flow, which tend to promote plastic flow and give rise to a toughness higher than other known Fe-based bulk-glass-forming systems.

Bibliography

Demetriou, M. D., Kaltenboeck, G., Suh, J.-Y., Garrett, G., Floyd, M., Crewdson, C., Hofmann, D. C., Kozachkov, H., Wiest, A., Schramm, J. P., & Johnson, W. L. (2009). Glassy steel optimized for glass-forming ability and toughness. Applied Physics Letters, 95(4).

Authors 11

Marios D. Demetriou (first)
Georg Kaltenboeck (additional)
Jin-Yoo Suh (additional)
Glenn Garrett (additional)
Michael Floyd (additional)
Chase Crewdson (additional)
Douglas C. Hofmann (additional)
Henry Kozachkov (additional)
Aaron Wiest (additional)
Joseph P. Schramm (additional)
William L. Johnson (additional)

References 26 Referenced 49

10.1103/PhysRevLett.92.245503 / Phys. Rev. Lett. (2004)
10.1557/JMR.2004.0176 / J. Mater. Res. (2004)
10.1557/jmr.2007.0036 / J. Mater. Res. (2007)
10.1557/JMR.2005.0104 / J. Mater. Res. (2005)
10.1016/j.actamat.2007.09.011 / Acta Mater. (2008)
10.1063/1.2890489 / Appl. Phys. Lett. (2008)
10.1103/PhysRevLett.95.195501 / Phys. Rev. Lett. (2005)
10.1103/PhysRevLett.97.065502 / Phys. Rev. Lett. (2006)
10.1557/mrs2007.127 / MRS Bull. (2007)
10.1063/1.1709084 / J. Appl. Phys. (1967)
10.1007/BF00591492 / J. Mater. Sci. (1982)
10.1016/0036-9748(75)90196-9 / Scr. Metall. (1975)
10.1063/1.124273 / Appl. Phys. Lett. (1999)
10.2320/matertrans.48.1157 / Mater. Trans. (2007)
10.1063/1.2189910 / Appl. Phys. Lett. (2006)
10.2320/matertrans.MRA2007186 / Mater. Trans. (2008)
10.1063/1.2820608 / Appl. Phys. Lett. (2007)
{'key': '2023073103292599400_c18'}
{'key': '2023073103292599400_c19'}
{'first-page': '666', 'volume-title': 'Stress Intensity Factors Handbook', 'year': '1987', 'key': '2023073103292599400_c20'} / Stress Intensity Factors Handbook (1987)
10.1016/j.scriptamat.2004.03.034 / Scr. Mater. (2004)
10.1103/PhysRevLett.94.125510 / Phys. Rev. Lett. (2005)
10.1080/09500830802438131 / Philos. Mag. Lett. (2008)
10.1016/j.scriptamat.2007.05.006 / Scr. Mater. (2007)
10.1063/1.1599636 / Appl. Phys. Lett. (2003)
{'key': '2023073103292599400_c26'}

Dates

Type	When
Created	16 years ago (Aug. 3, 2009, 9:35 a.m.)
Deposited	2 years, 1 month ago (July 30, 2023, 11:29 p.m.)
Indexed	1 month ago (July 30, 2025, 6:52 a.m.)
Issued	16 years, 1 month ago (July 27, 2009)
Published	16 years, 1 month ago (July 27, 2009)
Published Online	16 years, 1 month ago (July 31, 2009)
Published Print	16 years, 1 month ago (July 27, 2009)

Funders 0

None

BibTeX

@article{Demetriou_2009, title={Glassy steel optimized for glass-forming ability and toughness}, volume={95}, ISSN={1077-3118}, url={http://dx.doi.org/10.1063/1.3184792}, DOI={10.1063/1.3184792}, number={4}, journal={Applied Physics Letters}, publisher={AIP Publishing}, author={Demetriou, Marios D. and Kaltenboeck, Georg and Suh, Jin-Yoo and Garrett, Glenn and Floyd, Michael and Crewdson, Chase and Hofmann, Douglas C. and Kozachkov, Henry and Wiest, Aaron and Schramm, Joseph P. and Johnson, William L.}, year={2009}, month=jul }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2025,
        7,
        30
      ]
    ],
    "date-time": "2025-07-30T10:52:41Z",
    "timestamp": 1753872761516,
    "version": "3.41.2"
  },
  "reference-count": 26,
  "publisher": "AIP Publishing",
  "issue": "4",
  "content-domain": {
    "domain": [
      "pubs.aip.org"
    ],
    "crossmark-restriction": true
  },
  "published-print": {
    "date-parts": [
      [
        2009,
        7,
        27
      ]
    ]
  },
  "abstract": "<jats:p>An alloy development strategy coupled with toughness assessments and ultrasonic measurements is implemented to design a series of iron-based glass-forming alloys that demonstrate improved glass-forming ability and toughness. The combination of good glass-forming ability and high toughness demonstrated by the present alloys is uncommon in Fe-based systems, and is attributed to the ability of these compositions to form stable glass configurations associated with low activation barriers for shear flow, which tend to promote plastic flow and give rise to a toughness higher than other known Fe-based bulk-glass-forming systems.</jats:p>",
  "DOI": "10.1063/1.3184792",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2009,
        8,
        3
      ]
    ],
    "date-time": "2009-08-03T13:35:23Z",
    "timestamp": 1249306523000
  },
  "update-policy": "https://doi.org/10.1063/aip-crossmark-policy-page",
  "source": "Crossref",
  "is-referenced-by-count": 49,
  "title": "Glassy steel optimized for glass-forming ability and toughness",
  "prefix": "10.1063",
  "volume": "95",
  "author": [
    {
      "given": "Marios D.",
      "family": "Demetriou",
      "sequence": "first",
      "affiliation": [
        {
          "name": "California Institute of Technology Keck Engineering Laboratories, , Pasadena, California 91125, USA"
        }
      ]
    },
    {
      "given": "Georg",
      "family": "Kaltenboeck",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "California Institute of Technology Keck Engineering Laboratories, , Pasadena, California 91125, USA"
        }
      ]
    },
    {
      "given": "Jin-Yoo",
      "family": "Suh",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "California Institute of Technology Keck Engineering Laboratories, , Pasadena, California 91125, USA"
        }
      ]
    },
    {
      "given": "Glenn",
      "family": "Garrett",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "California Institute of Technology Keck Engineering Laboratories, , Pasadena, California 91125, USA"
        }
      ]
    },
    {
      "given": "Michael",
      "family": "Floyd",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "California Institute of Technology Keck Engineering Laboratories, , Pasadena, California 91125, USA"
        }
      ]
    },
    {
      "given": "Chase",
      "family": "Crewdson",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "California Institute of Technology Keck Engineering Laboratories, , Pasadena, California 91125, USA"
        }
      ]
    },
    {
      "given": "Douglas C.",
      "family": "Hofmann",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "California Institute of Technology Keck Engineering Laboratories, , Pasadena, California 91125, USA"
        }
      ]
    },
    {
      "given": "Henry",
      "family": "Kozachkov",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "California Institute of Technology Keck Engineering Laboratories, , Pasadena, California 91125, USA"
        }
      ]
    },
    {
      "given": "Aaron",
      "family": "Wiest",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "California Institute of Technology Keck Engineering Laboratories, , Pasadena, California 91125, USA"
        }
      ]
    },
    {
      "given": "Joseph P.",
      "family": "Schramm",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "California Institute of Technology Keck Engineering Laboratories, , Pasadena, California 91125, USA"
        }
      ]
    },
    {
      "given": "William L.",
      "family": "Johnson",
      "sequence": "additional",
      "affiliation": [
        {
          "name": "California Institute of Technology Keck Engineering Laboratories, , Pasadena, California 91125, USA"
        }
      ]
    }
  ],
  "member": "317",
  "published-online": {
    "date-parts": [
      [
        2009,
        7,
        31
      ]
    ]
  },
  "reference": [
    {
      "key": "2023073103292599400_c1",
      "doi-asserted-by": "publisher",
      "first-page": "245503",
      "DOI": "10.1103/PhysRevLett.92.245503",
      "volume": "92",
      "year": "2004",
      "journal-title": "Phys. Rev. Lett."
    },
    {
      "key": "2023073103292599400_c2",
      "doi-asserted-by": "publisher",
      "first-page": "1320",
      "DOI": "10.1557/JMR.2004.0176",
      "volume": "19",
      "year": "2004",
      "journal-title": "J. Mater. Res."
    },
    {
      "key": "2023073103292599400_c3",
      "doi-asserted-by": "publisher",
      "first-page": "344",
      "DOI": "10.1557/jmr.2007.0036",
      "volume": "22",
      "year": "2007",
      "journal-title": "J. Mater. Res."
    },
    {
      "key": "2023073103292599400_c4",
      "doi-asserted-by": "publisher",
      "first-page": "783",
      "DOI": "10.1557/JMR.2005.0104",
      "volume": "20",
      "year": "2005",
      "journal-title": "J. Mater. Res."
    },
    {
      "key": "2023073103292599400_c5",
      "doi-asserted-by": "publisher",
      "first-page": "88",
      "DOI": "10.1016/j.actamat.2007.09.011",
      "volume": "56",
      "year": "2008",
      "journal-title": "Acta Mater."
    },
    {
      "key": "2023073103292599400_c6",
      "doi-asserted-by": "publisher",
      "first-page": "091918",
      "DOI": "10.1063/1.2890489",
      "volume": "92",
      "year": "2008",
      "journal-title": "Appl. Phys. Lett."
    },
    {
      "key": "2023073103292599400_c7",
      "doi-asserted-by": "publisher",
      "first-page": "195501",
      "DOI": "10.1103/PhysRevLett.95.195501",
      "volume": "95",
      "year": "2005",
      "journal-title": "Phys. Rev. Lett."
    },
    {
      "key": "2023073103292599400_c8",
      "doi-asserted-by": "publisher",
      "first-page": "065502",
      "DOI": "10.1103/PhysRevLett.97.065502",
      "volume": "97",
      "year": "2006",
      "journal-title": "Phys. Rev. Lett."
    },
    {
      "key": "2023073103292599400_c9",
      "doi-asserted-by": "crossref",
      "first-page": "644",
      "DOI": "10.1557/mrs2007.127",
      "volume": "32",
      "year": "2007",
      "journal-title": "MRS Bull."
    },
    {
      "key": "2023073103292599400_c10",
      "doi-asserted-by": "publisher",
      "first-page": "4096",
      "DOI": "10.1063/1.1709084",
      "volume": "38",
      "year": "1967",
      "journal-title": "J. Appl. Phys."
    },
    {
      "key": "2023073103292599400_c11",
      "doi-asserted-by": "publisher",
      "first-page": "580",
      "DOI": "10.1007/BF00591492",
      "volume": "17",
      "year": "1982",
      "journal-title": "J. Mater. Sci."
    },
    {
      "key": "2023073103292599400_c12",
      "doi-asserted-by": "publisher",
      "first-page": "211",
      "DOI": "10.1016/0036-9748(75)90196-9",
      "volume": "9",
      "year": "1975",
      "journal-title": "Scr. Metall."
    },
    {
      "key": "2023073103292599400_c13",
      "doi-asserted-by": "publisher",
      "first-page": "49",
      "DOI": "10.1063/1.124273",
      "volume": "75",
      "year": "1999",
      "journal-title": "Appl. Phys. Lett."
    },
    {
      "key": "2023073103292599400_c14",
      "doi-asserted-by": "publisher",
      "first-page": "1157",
      "DOI": "10.2320/matertrans.48.1157",
      "volume": "48",
      "year": "2007",
      "journal-title": "Mater. Trans."
    },
    {
      "key": "2023073103292599400_c15",
      "doi-asserted-by": "publisher",
      "first-page": "131907",
      "DOI": "10.1063/1.2189910",
      "volume": "88",
      "year": "2006",
      "journal-title": "Appl. Phys. Lett."
    },
    {
      "key": "2023073103292599400_c16",
      "doi-asserted-by": "publisher",
      "first-page": "231",
      "DOI": "10.2320/matertrans.MRA2007186",
      "volume": "49",
      "year": "2008",
      "journal-title": "Mater. Trans."
    },
    {
      "key": "2023073103292599400_c17",
      "doi-asserted-by": "publisher",
      "first-page": "234101",
      "DOI": "10.1063/1.2820608",
      "volume": "91",
      "year": "2007",
      "journal-title": "Appl. Phys. Lett."
    },
    {
      "key": "2023073103292599400_c18"
    },
    {
      "key": "2023073103292599400_c19"
    },
    {
      "first-page": "666",
      "volume-title": "Stress Intensity Factors Handbook",
      "year": "1987",
      "key": "2023073103292599400_c20"
    },
    {
      "key": "2023073103292599400_c21",
      "doi-asserted-by": "publisher",
      "first-page": "151",
      "DOI": "10.1016/j.scriptamat.2004.03.034",
      "volume": "51",
      "year": "2004",
      "journal-title": "Scr. Mater."
    },
    {
      "key": "2023073103292599400_c22",
      "doi-asserted-by": "publisher",
      "first-page": "125510",
      "DOI": "10.1103/PhysRevLett.94.125510",
      "volume": "94",
      "year": "2005",
      "journal-title": "Phys. Rev. Lett."
    },
    {
      "key": "2023073103292599400_c23",
      "doi-asserted-by": "publisher",
      "first-page": "853",
      "DOI": "10.1080/09500830802438131",
      "volume": "88",
      "year": "2008",
      "journal-title": "Philos. Mag. Lett."
    },
    {
      "key": "2023073103292599400_c24",
      "doi-asserted-by": "publisher",
      "first-page": "289",
      "DOI": "10.1016/j.scriptamat.2007.05.006",
      "volume": "57",
      "year": "2007",
      "journal-title": "Scr. Mater."
    },
    {
      "key": "2023073103292599400_c25",
      "doi-asserted-by": "publisher",
      "first-page": "1131",
      "DOI": "10.1063/1.1599636",
      "volume": "83",
      "year": "2003",
      "journal-title": "Appl. Phys. Lett."
    },
    {
      "key": "2023073103292599400_c26"
    }
  ],
  "container-title": "Applied Physics Letters",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://pubs.aip.org/aip/apl/article-pdf/doi/10.1063/1.3184792/13135260/041907_1_online.pdf",
      "content-type": "application/pdf",
      "content-version": "vor",
      "intended-application": "syndication"
    },
    {
      "URL": "https://pubs.aip.org/aip/apl/article-pdf/doi/10.1063/1.3184792/13135260/041907_1_online.pdf",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "similarity-checking"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2023,
        7,
        31
      ]
    ],
    "date-time": "2023-07-31T03:29:33Z",
    "timestamp": 1690774173000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "https://pubs.aip.org/apl/article/95/4/041907/897463/Glassy-steel-optimized-for-glass-forming-ability"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        2009,
        7,
        27
      ]
    ]
  },
  "references-count": 26,
  "journal-issue": {
    "issue": "4",
    "published-print": {
      "date-parts": [
        [
          2009,
          7,
          27
        ]
      ]
    }
  },
  "URL": "http://dx.doi.org/10.1063/1.3184792",
  "relation": {},
  "ISSN": [
    "0003-6951",
    "1077-3118"
  ],
  "subject": [],
  "published-other": {
    "date-parts": [
      [
        2009,
        7,
        27
      ]
    ]
  },
  "published": {
    "date-parts": [
      [
        2009,
        7,
        27
      ]
    ]
  },
  "article-number": "041907"
}