Crossref journal-article
Springer Science and Business Media LLC
Nature Communications (297)
Bibliography

Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013). Sulphur–TiO2 yolk–shell nanoarchitecture with internal void space for long-cycle lithium–sulphur batteries. Nature Communications, 4(1).

Authors 8
  1. Zhi Wei Seh (first)
  2. Weiyang Li (additional)
  3. Judy J. Cha (additional)
  4. Guangyuan Zheng (additional)
  5. Yuan Yang (additional)
  6. Matthew T. McDowell (additional)
  7. Po-Chun Hsu (additional)
  8. Yi Cui (additional)
References 40 Referenced 1,948
  1. Arico A. S., Bruce P., Scrosati B., Tarascon J. M., Van Schalkwijk W. Nanostructured materials for advanced energy conversion and storage devices. Nat. Mater. 4, 366–377 (2005). (10.1038/nmat1368) / Nat. Mater. by AS Arico (2005)
  2. Bruce P. G., Freunberger S. A., Hardwick L. J., Tarascon J.-M. Li-O2 and Li-S batteries with high energy storage. Nat. Mater. 11, 19–29 (2012). (10.1038/nmat3191) / Nat. Mater. by PG Bruce (2012)
  3. Yang P. D., Tarascon J. M. Towards systems materials engineering. Nat. Mater. 11, 560–563 (2012). (10.1038/nmat3367) / Nat. Mater. by PD Yang (2012)
  4. Whittingham M. S. Lithium batteries and cathode materials. Chem. Rev. 104, 4271–4301 (2004). (10.1021/cr020731c) / Chem. Rev. by MS Whittingham (2004)
  5. Goodenough J. B., Kim Y. Challenges for rechargeable Li batteries. Chem. Mater. 22, 587–603 (2010). (10.1021/cm901452z) / Chem. Mater. by JB Goodenough (2010)
  6. Lee Y. J. et al. Fabricating genetically engineered high-power lithium ion batteries using multiple virus genes. Science 324, 1051–1055 (2009). (10.1126/science.1171541) / Science by YJ Lee (2009)
  7. Kang B., Ceder G. Battery materials for ultrafast charging and discharging. Nature 458, 190–193 (2009). (10.1038/nature07853) / Nature by B Kang (2009)
  8. Chung S. Y., Bloking J. T., Chiang Y. M. Electronically conductive phospho-olivines as lithium storage electrodes. Nat. Mater. 1, 123–128 (2002). (10.1038/nmat732) / Nat. Mater. by SY Chung (2002)
  9. Nishizawa M., Mukai K., Kuwabata S., Martin C. R., Yoneyama H. Template synthesis of polypyrrole-coated spinel LiMn2O4 nanotubules and their properties as cathode active materials for lithium batteries. J. Electrochem. Soc. 144, 1923–1927 (1997). (10.1149/1.1837722) / J. Electrochem. Soc. by M Nishizawa (1997)
  10. Park C. M., Kim J. H., Kim H., Sohn H. J. Li-alloy based anode materials for Li secondary batteries. Chem. Soc. Rev. 39, 3115–3141 (2010). (10.1039/b919877f) / Chem. Soc. Rev. by CM Park (2010)
  11. Ji L. W., Lin Z., Alcoutlabi M., Zhang X. W. Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries. Energy Environ. Sci 4, 2682–2699 (2011). (10.1039/c0ee00699h) / Energy Environ. Sci by LW Ji (2011)
  12. Kasavajjula U., Wang C., Appleby A. J. Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells. J. Power Sources 163, 1003–1039 (2007). (10.1016/j.jpowsour.2006.09.084) / J. Power Sources by U Kasavajjula (2007)
  13. Chan C. K. et al. High-performance lithium battery anodes using silicon nanowires. Nat. Nanotech. 3, 31–35 (2008). (10.1038/nnano.2007.411) / Nat. Nanotech. by CK Chan (2008)
  14. Magasinski A. et al. High-performance lithium-ion anodes using a hierarchical bottom-up approach. Nat. Mater. 9, 353–358 (2010). (10.1038/nmat2725) / Nat. Mater. by A Magasinski (2010)
  15. Mikhaylik Y. V., Akridge J. R. Polysulfide shuttle study in the Li/S battery system. J. Electrochem. Soc. 151, A1969–A1976 (2004). (10.1149/1.1806394) / J. Electrochem. Soc. by YV Mikhaylik (2004)
  16. Yamin H., Gorenshtein A., Penciner J., Sternberg Y., Peled E. Lithium sulfur battery - oxidation reduction-mechanisms of polysulfides in THF solutions. J. Electrochem. Soc. 135, 1045–1048 (1988). (10.1149/1.2095868) / J. Electrochem. Soc. by H Yamin (1988)
  17. Barchasz C., Lepretre J.-C., Alloin F., Patoux S. New insights into the limiting parameters of the Li/S rechargeable cell. J. Power Sources 199, 322–330 (2012). (10.1016/j.jpowsour.2011.07.021) / J. Power Sources by C Barchasz (2012)
  18. Aurbach D. et al. On the surface chemical aspects of very high energy density, rechargeable Li-sulfur batteries. J. Electrochem. Soc. 156, A694–A702 (2009). (10.1149/1.3148721) / J. Electrochem. Soc. by D Aurbach (2009)
  19. Elazari R., Salitra G., Garsuch A., Panchenko A., Aurbach D. Sulfur-impregnated activated carbon fiber cloth as a binder-free cathode for rechargeable Li-S batteries. Adv. Mater. 23, 5641–5644 (2011). (10.1002/adma.201103274) / Adv. Mater. by R Elazari (2011)
  20. Ji X., Lee K. T., Nazar L. F. A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries. Nat. Mater. 8, 500–506 (2009). (10.1038/nmat2460) / Nat. Mater. by X Ji (2009)
  21. Ji X., Evers S., Black R., Nazar L. F. Stabilizing lithium-sulphur cathodes using polysulphide reservoirs. Nat. Commun. 2, 325 (2011). (10.1038/ncomms1293) / Nat. Commun. by X Ji (2011)
  22. Schuster J. et al. Spherical ordered mesoporous carbon nanoparticles with high porosity for lithium-sulfur batteries. Angew. Chem. Int. Ed. 51, 3591–3595 (2012). (10.1002/anie.201107817) / Angew. Chem. Int. Ed. by J Schuster (2012)
  23. Liang C. D., Dudney N. J., Howe J. Y. Hierarchically structured sulfur/carbon nanocomposite material for high-energy lithium battery. Chem. Mater. 21, 4724–4730 (2009). (10.1021/cm902050j) / Chem. Mater. by CD Liang (2009)
  24. Yang Y. et al. New nanostructured Li2S/silicon rechargeable battery with high specific energy. Nano Lett. 10, 1486–1491 (2010). (10.1021/nl100504q) / Nano Lett. by Y Yang (2010)
  25. Zheng G., Yang Y., Cha J. J., Hong S. S., Cui Y. Hollow carbon nanofiber-encapsulated sulfur cathodes for high specific capacity rechargeable lithium batteries. Nano Lett. 11, 4462–4467 (2011). (10.1021/nl2027684) / Nano Lett. by G Zheng (2011)
  26. Guo J., Xu Y., Wang C. Sulfur-impregnated disordered carbon nanotubes cathode for lithium-sulfur batteries. Nano Lett. 11, 4288–4294 (2011). (10.1021/nl202297p) / Nano Lett. by J Guo (2011)
  27. Jayaprakash N., Shen J., Moganty S. S., Corona A., Archer L. A. Porous hollow carbon@sulfur composites for high-power lithium-sulfur batteries. Angew. Chem. Int. Ed. 50, 5904–5908 (2011). (10.1002/anie.201100637) / Angew. Chem. Int. Ed. by N Jayaprakash (2011)
  28. Wang H. et al. Graphene-wrapped sulfur particles as a rechargeable lithium-sulfur battery cathode material with high capacity and cycling stability. Nano Lett. 11, 2644–2647 (2011). (10.1021/nl200658a) / Nano Lett. by H Wang (2011)
  29. Ji L. et al. Graphene oxide as a sulfur immobilizer in high performance lithium/sulfur cells. J. Am. Chem. Soc. 133, 18522–18525 (2011). (10.1021/ja206955k) / J. Am. Chem. Soc. by L Ji (2011)
  30. Wang J. L., Yang J., Xie J. Y., Xu N. X. A novel conductive polymer-sulfur composite cathode material for rechargeable lithium batteries. Adv. Mater. 14, 963–965 (2002). (10.1002/1521-4095(20020705)14:13/14<963::AID-ADMA963>3.0.CO;2-P) / Adv. Mater. by JL Wang (2002)
  31. Xiao L. et al. A soft approach to encapsulate sulfur: polyaniline nanotubes for lithium-sulfur batteries with long cycle life. Adv. Mater. 24, 1176–1181 (2012). (10.1002/adma.201103392) / Adv. Mater. by L Xiao (2012)
  32. Wu F. et al. Sulfur/polythiophene with a core/shell structure: synthesis and electrochemical properties of the cathode for rechargeable lithium batteries. J. Phys. Chem. C 115, 6057–6063 (2011). (10.1021/jp1114724) / J. Phys. Chem. C by F Wu (2011)
  33. Fu Y., Manthiram A. Core-shell structured sulfur-polypyrrole composite cathodes for lithium-sulfur batteries. RSC Adv. 2, 5927–5929 (2012). (10.1039/c2ra20393f) / RSC Adv. by Y Fu (2012)
  34. Li X. et al. Hollow core-shell structured porous Si-C nanocomposites for Li-ion battery anodes. J. Mater. Chem. 22, 11014–11017 (2012). (10.1039/c2jm31286g) / J. Mater. Chem. by X Li (2012)
  35. Su L., Jing Y., Zhou Z. Li ion battery materials with core-shell nanostructures. Nanoscale 3, 3967–3983 (2011). (10.1039/c1nr10550g) / Nanoscale by L Su (2011)
  36. Zang L. et al. Amorphous microporous titania modified with platinum(IV) chloride - A new type of hybrid photocatalyst for visible light detoxification. J. Phys. Chem. B 102, 10765–10771 (1998). (10.1021/jp981755j) / J. Phys. Chem. B by L Zang (1998)
  37. Yan D., Kai X., Shizhao X., Xiaobin H. Analysis of polysulfide dissolved in electrolyte in discharge-charge process of Li-S battery. J. Electrochem. Soc. 159, A421–A425 (2012). (10.1149/2.060204jes) / J. Electrochem. Soc. by D Yan (2012)
  38. Yang Z. et al. Nanostructures and lithium electrochemical reactivity of lithium titanites and titanium oxides: a review. J. Power Sources 192, 588–598 (2009). (10.1016/j.jpowsour.2009.02.038) / J. Power Sources by Z Yang (2009)
  39. Furukawa H., Hibino M., Honma I. Electrochemical properties of nanostructured amorphous, sol-gel-synthesized TiO2/acetylene black composite electrodes. J. Electrochem. Soc. 151, A527–A531 (2004). (10.1149/1.1649747) / J. Electrochem. Soc. by H Furukawa (2004)
  40. Evers S., Yim T., Nazar L. F. Understanding the nature of absorption/adsorption in nanoporous polysulfide sorbents for the Li-S battery. J. Phys. Chem. C 116, 19653–19658 (2012). (10.1021/jp304380j) / J. Phys. Chem. C by S Evers (2012)
Dates
Type When
Created 12 years, 7 months ago (Jan. 8, 2013, 10:16 a.m.)
Deposited 2 years, 7 months ago (Jan. 5, 2023, 9:19 p.m.)
Indexed 2 days ago (Aug. 21, 2025, 1:43 p.m.)
Issued 12 years, 7 months ago (Jan. 8, 2013)
Published 12 years, 7 months ago (Jan. 8, 2013)
Published Online 12 years, 7 months ago (Jan. 8, 2013)
Funders 0

None

@article{Wei_Seh_2013, title={Sulphur–TiO2 yolk–shell nanoarchitecture with internal void space for long-cycle lithium–sulphur batteries}, volume={4}, ISSN={2041-1723}, url={http://dx.doi.org/10.1038/ncomms2327}, DOI={10.1038/ncomms2327}, number={1}, journal={Nature Communications}, publisher={Springer Science and Business Media LLC}, author={Wei Seh, Zhi and Li, Weiyang and Cha, Judy J. and Zheng, Guangyuan and Yang, Yuan and McDowell, Matthew T. and Hsu, Po-Chun and Cui, Yi}, year={2013}, month=jan }