Crossref journal-article
Springer Science and Business Media LLC
Journal of Materials Science (297)
Bibliography

Jadaan, O. M., Nemeth, N. N., Bagdahn, J., & Sharpe, W. N. (2003). Probabilistic Weibull behavior and mechanical properties of MEMS brittle materials. Journal of Materials Science, 38(20), 4087–4113.

Authors 4
  1. O. M. Jadaan (first)
  2. N. N. Nemeth (additional)
  3. J. Bagdahn (additional)
  4. W. N. Sharpe (additional)
References 119 Referenced 94
  1. M. Mehregany, Introduction to MEMS-MEMS Short Course.
  2. J. Reiter, M. Terry, K. Bohringer, J. Suh and G. Kovacs, “Thermo-Bimorph Microcilia Arrays for Small Spacecraft Docking,” MEMS-Vol. 2, Micro-Electro-Mechanical Systems (MEMS)-2000, ASME, 2000. (10.1115/IMECE2000-1071)
  3. N. N. Nemeth, L. M. Powers, L. A. Janosik and J. P. Gykenyesi, “CARES/Life Ceramics Analysis and Reliability Evaluation of Structures Life Prediction Program,” NASA/TM-2003-106316, National Aeronautics and Space Administration, 2003.
  4. W. Weibull, “A Statistical Theory of the Strength of Materials,” Ingenoirs Vetenskaps Akadanien Handlinger, No. 151, 1939.
  5. R. Barnett, C. Connors, P. Hermann and J. Wingfield, “Fracture of Brittle Materials Under Transient Mechanical and Thermal Loading,” U.S. Air Force Flight Dynamics Laboratory, AFFDL-TR-66-220 (NTIS AD-649978), 1967. (10.21236/AD0649978)
  6. A. Freudenthal, “Statistical Approach to Brittle Fracture,” Fracture, Vol. 2: An Advanced Treatise, Mathematical Fundamentals, edited by H. Liebowitz (Academic Press, 1968) p. 591.
  7. W. Weibull, “The Phenomenon of Rupture in Solids,” Ingenoirs Vetenskaps Akadanien Handlinger, No. 153, 1939.
  8. S. Batdorf and J. Crose, J. Appl. Mech. 41(2) (1974) 459. (10.1115/1.3423310) / J. Appl. Mech. by S. Batdorf (1974)
  9. S. Batdorf and H. Heinisch, Jr., J. Amer. Ceram. Soc. 61(7/8) (1978) 355. (10.1111/j.1151-2916.1978.tb09327.x) / J. Amer. Ceram. Soc. by S. Batdorf (1978)
  10. T. Tsuchiya, O. Tabata, J. Sakata and Y. Taga, “Specimen Size Effect on Tensile Strength of Surface-Micromachined Polycrystalline Silicon Thin Films,” in Proceedings of the Tenth Annual InternationalWorkshop on MEMS, 1997. (10.1109/84.661392)
  11. Idem., J. Microelectromech. Syst. 7 (1998) 106. (10.1109/84.661392)
  12. D. Lavan, T. Tsuchiya, G. Coles, W. Knauss, I. Chasiotis and D. Read, “Cross Comparison of Direct Tensile Testing Techniques on Polysilicon Films,” Mechanical Properties of Structural Films, ASTM STP 1413, edited by C. Muhlstein and S. Brown, American Society for Testing and Materials, 2001. (10.1520/STP10977S)
  13. T. Tsuchiya and J. Sakata, “Tensile Testing of Thin Films Using Electrostatic Force Grip,” Mechanical Properties of Structural Films, ASTM STP 1413, edited by C. Muhlstein and S. Brown, American Society for Testing and Materials, 2001. (10.1520/STP10991S)
  14. W. Sharpe, Jr., K. Turner and R. Edwards, Mater. Res. Soc. Symp. 518 (1998) 191. (10.1557/PROC-518-191) / Mater. Res. Soc. Symp. by W. Sharpe Jr. (1998)
  15. W. Sharpe, Jr., B. Yuan and R. Edwards, J. Microelectromech. Syst. 6 (1997) 193. (10.1109/84.623107) / J. Microelectromech. Syst. by W. Sharpe Jr. (1997)
  16. W. Sharpe, Jr., K. Jackson, K. Hemker and Z. Zie, J. Microelectromech. Syst.ibid. 10 (2001) 317. (10.1109/84.946774) / J. Microelectromech. Syst.ibid. by W. Sharpe (2001)
  17. D. Lavan, K. Jackson, B. Mckenzie, S. Glass, T. Friedmann, J. Sullivan and T. Buchheit, “Direct Tension and Fracture Toughness Testing Using the Lateral Force Capabilities of a Nanomechanical Test System,” Mechanical Properties of Structural Films, ASTM STP 1413, edited by C. Muhlstein and S. Brown, American Society for Testing and Materials, 2001. (10.1520/STP10981S)
  18. S. Glass, D. Lavan, T. Buchheit and K. Jackson, “Strength Testing and Fractography of MEMSMaterials,” Sandia No. 2000-0081C.
  19. S. Glass, T. Buchheit and T. Friedmann, “Strength Testing and FractographyMEMSmaterials,” Presented at the 103rd Annual Meeting of the American Ceramic Society, Indianapolis, Indiana, April 2000.
  20. S. Greek, F. Ericson, S. Johanasson and M. Furtsch, J. Micromech. Microengin. 9 (1999) 245. (10.1088/0960-1317/9/3/305) / J. Micromech. Microengin. by S. Greek (1999)
  21. S. Greek, F. Ericson, S. Johansson and J. Schweitz, Thin Solid Films (1997) 247. (10.1016/S0040-6090(96)09076-1)
  22. T. Ando, T. Yshioka, M. Shikida and K. Sato, “Quasi-Static and Fatigue Fracture Strength of Microsized Silicon Film Measured by On-Chip Test Method,” MEMS-Vol. 2, Micro-Electro-Mechanical Systems (MEMS)-2000 ASME, 2000, p. 1. (10.1115/IMECE2000-1062)
  23. J. Ding, Y. Meng and S. Wen, J. Mater. Res. 16 (2001) 2223. (10.1557/JMR.2001.0305) / J. Mater. Res. by J. Ding (2001)
  24. C. Wilson and P. Beck, J. Microelectromech. Syst. 5 (1996) 142. (10.1109/84.536620) / J. Microelectromech. Syst. by C. Wilson (1996)
  25. C. Wilson, A. Ormeggi and M. Narbutovskih, J. Appl. Phys. 79(5) (1996) 2386. (10.1063/1.361102) / J. Appl. Phys. by C. Wilson (1996)
  26. S. Johansson, J. Schweitz, L. Tenerz and J. Tiren J. Appl. Phys.ibid. 63(10) (1988) 4799. (10.1063/1.340471)
  27. F. Ericson and J.-A. Schweitz, J. Appl. Phys.ibid. 68(11) (1990) 5840. (10.1063/1.346957) / J. Appl. Phys.ibid. by F. Ericson (1990)
  28. P. Jones, G. Johnson and R. Howe, “Statistical Characterization of Fracture of Brittle MEMS Materials,” in Proceedings SPIE 3880, 2000, p. 20. (10.1117/12.359368)
  29. J. Beams, in “Structure and Properties of Thin Films,” edited by C. Neugbauer, J. Newkirk and D. Vermilyea (John Wiley and Sons, Inc., New York, 1959). / Structure and Properties of Thin Films by J. Beams (1959)
  30. M. Small and W. Nix, J. Mater. Res. 7(6) (1992). (10.1557/JMR.1992.1553)
  31. J.-Y. Pan, P. Lin, F. Maseeh and S. Senturia, “Verification of FEM Analysis of Load-Deflection Methods for Measuring Mechanical Property of Thin Films,” Technical Digest, IEEE Solid-State Sensor and Actuator Workshop, Hilton-Head, SC, 1986.
  32. J. Mitchell, Characterization of Mechanical Properties of Cubic Silicon Carbide Thin Films Deposited Onto Silicon,Master of Science Thesis, Case Western Reserve University, Cleveland, OH, 2000. / Characterization of Mechanical Properties of Cubic Silicon Carbide Thin Films Deposited Onto Silicon by J. Mitchell (2000)
  33. S. Timoshenko and S. Woinowsky-Krieger, “Theory of Plates and Shells,” 2nd ed. (McGraw-Hill Book Company, New York, 1959) p. 422. / Theory of Plates and Shells by S. Timoshenko (1959)
  34. M. Allen, M. Mehregany, R. Howe and S. Sentuia, Appl. Phys. Lett. 51 (1987) 241. (10.1063/1.98460) / Appl. Phys. Lett. by M. Allen (1987)
  35. J. Vlassak and W. Nix, J. Mater. Res. Soc. 7(12) (1992) 3242. (10.1557/JMR.1992.3242) / J. Mater. Res. Soc. by J. Vlassak (1992)
  36. D. Maier-Schneider, J. Maibach and E. Obermeier, J. Microelectromech. Syst. 4(4) (1992) 238. (10.1109/84.475551) / J. Microelectromech. Syst. by D. Maier-Schneider (1992)
  37. C. Su, A. Fekade, M. Spencer and M. Wittig, J. Appl. Phys. 77(3) (1995). (10.1063/1.359579)
  38. C. Su, M. Wittig, A. Fekade and M. Spencer, J. Appl. Phys.ibid. 77(11) (1995) 5611. (10.1063/1.359551)
  39. D. Hardwick, Thin Solid Films 154 (1987) 109. (10.1016/0040-6090(87)90357-9) / Thin Solid Films by D. Hardwick (1987)
  40. D. Yang and T. Anderson, “Fracture Toughness of SiC Determined Using Nanoindentation,” Information Literature from Instron Incorporated.
  41. FSM Frontier Semiconductor Measurement Inc., Film Measurement System, 1631 North First Street, Suit 100, San Jose, CA 95117.
  42. Y. Yamaguchi, H. Nagasawa, T. Shoki and N. Annaka, “Properties of Heteroepitaxial 3C-SiC Films Grown by LPCVD,” Transducers' 95-Eurosensors IX, Stockholm, Sweden, June 25–29, 1995, p. 190. (10.1109/SENSOR.1995.721777)
  43. T. Kamins and T. Cass, Thin Sold Films 16(2) (1973) 147. (10.1016/0040-6090(73)90164-8) / Thin Sold Films by T. Kamins (1973)
  44. T. Kamins, J. Electrochem. Soc. 127 (1980) 686. (10.1149/1.2129733) / J. Electrochem. Soc. by T. Kamins (1980)
  45. S. Jayaraman, R. Edwards and K. Hemker, Mater. Res. Soc. 14 (1998) 688. (10.1557/JMR.1999.0094) / Mater. Res. Soc. by S. Jayaraman (1998)
  46. R. Ballarini, Y. Yin and H. Kahn, J. Mater. Res. 12 (1997) 915. (10.1557/JMR.1997.0131) / J. Mater. Res. by R. Ballarini (1997)
  47. D. Maier-Schneider, A. Koprululu, S. Holm and E. Obermeier, J. Micromech. Microengin. 6 (1996) 436. (10.1088/0960-1317/6/4/011) / J. Micromech. Microengin. by D. Maier-Schneider (1996)
  48. W. Sharpe, Jr. and K. Jackson, “Tensile Testing of MEMS Materials,” in Proceedings of the Society of Experimental Mechanics, June 2000.
  49. W. Sharpe, Jr., K. Turner and R. Edwards, Experim. Mech. 39 (1999) 162. (10.1007/BF02323548) / Experim. Mech. by W. Sharpe Jr. (1999)
  50. W. Sharpe, Jr., K. Jackson, G. Coles and D. Lavan, “Mechanical Properties of Different Polysilicons,” MEMS-Vol 2, Micro-Electro-Mechanical (MEMS)-2000, ASME, 2000. (10.1115/IMECE2000-1100)
  51. J. Ding, Y. Meng and S. Wen, Chinese J. Sci. Instr. (2000) 440.
  52. M. Furtsch, M. Offenberg, H. Muenzel and J. Morante, “Comprehensive Study of Processing Parameters In-fluencing the Stress and Stress Gradient of Thick Polysilicon Layers,” in Proceedings of Micromachining Microfabrication Process Technology III, in Proceedings SPIE 3223, 1997, p. 130. (10.1117/12.284473)
  53. J. Koskinen, J. Steiwall, R. Soave and H. Johnson, J. Micromech. Microengin. 3 (1993) 13. (10.1088/0960-1317/3/1/004) / J. Micromech. Microengin. by J. Koskinen (1993)
  54. J. Bagdahn, W. N. Sharpe, Jr. and O. Jadaan, J. Microelectromech. Syst. 12(3) (2003). (10.1109/JMEMS.2003.814130)
  55. C. Muhlstein, E. Stach and R. Ritchie, Appl. Phys. Lett. 80(9) (2002). (10.1063/1.1455142)
  56. S. Brown, W. Arsdell and C. Muhlstein, “Materials Reliability in MEMS Devices,” Transducers 1997, 1997 International Conference on Solid-State Sensors and Actuators, 1997.
  57. C. Marxer, M. Gretillat, N. de Rooij, R. Battig, O. Anthamatten, B. Valk and P. Vogel, Sens. Actuators A61 (1997) 449. (10.1016/S0924-4247(97)80304-4) / Sens. Actuators by C. Marxer (1997)
  58. R. Ballarini, The Role of Mechanics in Microelectromechanical Systems(MEMS)Technology, AFRL-ML-WP-TR-1998-4209, Air Force Research Laboratory: Dayton, Ohio, 1998. / The Role of Mechanics in Microelectromechanical Systems(MEMS)Technology by R. Ballarini (1998)
  59. H. Kapels, R. Aigner and J. Binder, IEEE Trans. Electron. Dev. 47 (2000) 1522. (10.1109/16.848302) / IEEE Trans. Electron. Dev. by H. Kapels (2000)
  60. J. Bagdahn and W. N. Sharpe, Jr., “Reliability of Polysilicon Under Long-Term Cyclic Loading,” 15th IEEE Int. Conf. on MEMS, January 20–24, Las Vegas, 2001, p. 447.
  61. W. van Arsdell, Subcritical Crack Growth in Polysislicon MEMS, Ph.D. Dissertation, MIT, Cambridge, MA, 1997. / Subcritical Crack Growth in Polysislicon MEMS by W. van Arsdell (1997)
  62. K. Jackson, T. Buchheit and D. Lavan, “Fracture Toughness of Thin Film Polysilicon Used in MEMS Devices,” in MEMS: Mechanics and Measurements, Society of Experimental Mechanics Symposium, 2001, p. 11.
  63. W. Sharpe, B. Yuan and R. Edwards, Mater. Res. Soc. Symp. 505 (1997) 51. (10.1557/PROC-505-51) / Mater. Res. Soc. Symp. by W. Sharpe (1997)
  64. H. Kahn, N. Tayebi, R. Ballarini, R. Mullen and A. Heuer, Sens. Actuators 82 (2000) 274. (10.1016/S0924-4247(99)00366-0) / Sens. Actuators by H. Kahn (2000)
  65. R. Ballarini, H. Kahn, N. Tayebi and H. Heuer, “Effects of Microstructure on the Strength and Fracture Toughness of Polysilicon: A Wafer Level Testing Approach,” Mechanical properties of Structural Films, ASTM STP 1413, edited by C. Muhlstein and S. Brown, 2001. (10.1520/STP10979S)
  66. J. Bagdahn, J. Schischka, M. Petzold and W. N. Sharpe, Jr., “Fracture Toughness and Fatigue Investigations of Polycrystalline,” in Proceedings of the SPIE 4558 (Reliability, Testing, and Characterization of MEMS/MOEMS), San Francisco, October 2001, p. 159. (10.1117/12.442998)
  67. A. Michalicek, D. Sene and V. Bright, “Advanced Modeling of Micromirror Devices,” in international Conference on Integrated Micro/Nanotechnology for Space applications, 1995, p. 214.
  68. H. Kahn, M. Huff and A. Heuer, Mater. Res. Soc. Symp. 518 (1998) 33. (10.1557/PROC-518-33) / Mater. Res. Soc. Symp. by H. Kahn (1998)
  69. M. Eby, W. Sharpe and G. Coles, “Mechanical Properties of Polysislicon between 0°C and 250°C,” in MEMS: Mechanics and Measurements, Society of Experimental Mechanics Symposium, Portland, Oregon, 2001, p. 16.
  70. J. Chae, J-Y. Lee and S. Kang, “Measurement of Thermal Expansion Coefficient of Poly-Si Using Microgauge Sensors,” in Proceedings SPIE (1997) Vol. 3242, p. 202. (10.1117/12.293562) / Proceedings SPIE by J. Chae (1997)
  71. F. Jensen, M. Machonkin, N. Palmieri and D. Kuhman, J. Appl. Phys. 62 (1987) 4732. (10.1063/1.339026) / J. Appl. Phys. by F. Jensen (1987)
  72. J. Kohler, K. Jonsson, S. Greek and L. Stenmark, J. Electrochem. Soc. 147(12) (2000) 4683. (10.1149/1.1394123) / J. Electrochem. Soc. by J. Kohler (2000)
  73. S. Timoshenko and S. Woinowsky-Krieger, Theory of Plates and Shells, 2nd ed. (McGraw-Hill Book Company, New York, 1959) p. 197. / Theory of Plates and Shells by S. Timoshenko (1959)
  74. M. Variam, “Behavior of MOEMS Package (TI DMD) Under Mechanical and Thermal Loads,” in MEMS-Vol 2, MEMSASME2000, 2000. (10.1115/IMECE2000-1152)
  75. J. Bagdahn, A. Ploessl, M. Wiemer and M. Petzold, “Measurement of the Local Strength Distribution of Directly Bonded Silicon Wafers Using the Micro-Chevron-Test,” in Proc. 5th International Symposium on Semiconductor Wafer Bonding, Electrochemical Society PV 99-35, 2001.
  76. M. Petzold, H. Knoll and J. Bagdahn, “Strength Assessment of Wafer-Bonded Micromechanical Components Using the Micro-Chevron-Test,” in Proceedings of the SPIE 4558 (Reliability, Testing, and Characterization of MEMS/MOEMS), San Francisco, October 2001, p. 133. (10.1117/12.442994)
  77. J. Bagdahn and M. Petzold, J. Microsystem Techn. 7(4) (2001) 175. (10.1007/s005420000085) / J. Microsystem Techn. by J. Bagdahn (2001)
  78. J. Bagdahn, M. Bernasch, and M. Petzold, “In-fluence of Frequency on the Fatigue of Directly Wafer-Bonded Silicon,” 8th. Int. Congress on Fatigue, Stockholm, Sweden, 2002, p. 2245.
  79. A. G. Evans and E. R. Fuller, Metall. Trans. 5 (1974) 27. (10.1007/BF02642921) / Metall. Trans. by A. G. Evans (1974)
  80. J.-A. Schweitz and F. Ericson, Sens. Actuators 74 (1999) 126. (10.1016/S0924-4247(98)00348-3) / Sens. Actuators by J.-A. Schweitz (1999)
  81. S. Wolf and R. Tauber, “Silicon Processing for the VLSI era,” Process Technology, Vol. 1 (Lattice Press, Sunset Beach, CA, 1986) p. 5. / Process Technology by S. Wolf (1986)
  82. R. Shultz, M. Jensen and R. Bradt, Intern. J. Fract. 65 (1994) 291. (10.1007/BF00012370) / Intern. J. Fract. by R. Shultz (1994)
  83. C. Chen and M. Leipold, Bull. Amer. Ceram. Soc. 59 (1980) 469. / Bull. Amer. Ceram. Soc. by C. Chen (1980)
  84. J. Nye, “Physical Properties of Crystals,” Chapt. VIII (Clarendon Press, Oxford, 1957). / Physical Properties of Crystals by J. Nye (1957)
  85. W. Brantley, J. Appl. Phys. 44(1) (1973). (10.1063/1.1661935)
  86. K.-S. Chen, A. Ayon and S. Spearing, J. Amer. Ceram. Soc. 83(6) (2000) 1476. (10.1111/j.1151-2916.2000.tb01413.x) / J. Amer. Ceram. Soc. by K.-S. Chen (2000)
  87. T. Tsakalakos, Thin Solid Films 75 (1981) 293. (10.1016/0040-6090(81)90407-7) / Thin Solid Films by T. Tsakalakos (1981)
  88. S. Hu, J. Appl. Phys. 53 (1982) 3576. (10.1063/1.331137) / J. Appl. Phys. by S. Hu (1982)
  89. R. Eisner, Acta Metall. 3 (1955) 414. (10.1016/0001-6160(55)90051-1) / Acta Metall. by R. Eisner (1955)
  90. G. Pearson, W. Read, Jr. and W. Feldmann, Acta Metall. 5 (1957) 181. (10.1016/0001-6160(57)90164-5) / Acta Metall. by G. Pearson (1957)
  91. T. Namazu, Y. Isono and T. Tanaka, “Nano-Scale Bending Test of Si Beam for MEMS,” in Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems, 2000, p. 205. (10.1109/MEMSYS.2000.838517)
  92. K. Sato, T. Yoshioka, T. Ando, M. Shikida and T. Kawabata, Sens. Actuators A 70 (1998) 148. (10.1016/S0924-4247(98)00125-3) / Sens. Actuators A by K. Sato (1998)
  93. T. Yi, L. Li and C.-J. Kim, Sens. Actuators 83 (2000) 172. (10.1016/S0924-4247(00)00350-2) / Sens. Actuators by T. Yi (2000)
  94. K.-S. Chen, S. Spearing and N. Nemeth, AIAA Journal 39(4) (2001) 720. (10.2514/2.1367) / AIAA Journal by K.-S. Chen (2001)
  95. C. Chen and M. Leipold, J. Amer. Ceram. Soc. 68(2) (1985) C54. (10.1111/j.1151-2916.1985.tb15283.x) / J. Amer. Ceram. Soc. by C. Chen (1985)
  96. J. Ritter and J. Humenik, J. Mater. Sci. 14(3) (1979) 626. (10.1007/BF00772723) / J. Mater. Sci. by J. Ritter (1979)
  97. T.-J. Chen and W. Knapp, “The Fracture of Single-Crystal Silicon Under Several Liquid Environments,” J. Amer. Ceram. Soc. 63 (1980) 225. (10.1111/j.1151-2916.1980.tb10697.x) / J. Amer. Ceram. Soc. by T.-J. Chen (1980)
  98. B. Wong and R. Holbrook, J. Electrochem. Soc. 134 (1987) 2254. (10.1149/1.2100861) / J. Electrochem. Soc. by B. Wong (1987)
  99. J. Conally and S. Brown, Science 256 (1992) 1537. (10.1126/science.256.5063.1537) / Science by J. Conally (1992)
  100. S. Bhaduri and F. Wang, in “Fracture Mechanics of Ceramics” (Plenum Press, 1983) p. 327. (10.1007/978-1-4613-3488-0_20)
  101. C. Muhlstein, S. Brown and R. Ritchie, J. Microelectromech. Syst. 10(4) (2001) 593. (10.1109/84.967383) / J. Microelectromech. Syst. by C. Muhlstein (2001)
  102. A. Epstein and S. Senturia, “Macro Power From Micro Machinery,” Science 276(5316) (1997) 1211. (10.1126/science.276.5316.1211) / Science by A. Epstein (1997)
  103. S. Spearing and K.-S. Chen, Ceram. Engin. Sci. Proc. 18(4) (1997) 11. (10.1002/9780470294444.ch2) / Ceram. Engin. Sci. Proc. by S. Spearing (1997)
  104. D. Walters and S. Spearing, Scripta Mater. 42(8) (2000) 769. (10.1016/S1359-6462(99)00428-5) / Scripta Mater. by D. Walters (2000)
  105. K.-S. Chen, Ph.D. Thesis, Massachusetts Institute of Technology, 1999.
  106. G. Coles, W. Sharpe, Jr. and R. Edwards, “Mechanical Properties of Silicon Nitride,” MEMS-Vol 2, Micro-Electro-Mechanical (MEMS)-2000, ASME 2000 (2000) p. 1.
  107. W. Sharpe, Jr., “New Test Structures and Techniques for Measurement of Mechanical Properties of MEMS Materials,” in Proceedings of the SPIE Symposium on Microlithography and Metrology in Micromachining II, Austin, TX, 1996, p. 78. (10.1117/12.250969)
  108. T. Yoshioka, T. Ando, M. Shikida and K. Sato, Sen. Actuators 82 (2000) 291. (10.1016/S0924-4247(99)00364-7) / Sen. Actuators by T. Yoshioka (2000)
  109. T.-Y. Zhang, Y.-J. Su, C.-F. Qian, M.-H. Hao and L.-Q. Chen, Acta Mater. 48 (2000) 2843. (10.1016/S1359-6454(00)00088-4) / Acta Mater. by T.-Y. Zhang (2000)
  110. O. Tabata, K. Kawahata, S. Sugiyama and I. Igarashi, Sens. Actuators 20 (1989) 135. (10.1016/0250-6874(89)87111-2) / Sens. Actuators by O. Tabata (1989)
  111. G. Cardinale and R. Tustison, Thin Solid Films 207 (1992) 126. (10.1016/0040-6090(92)90112-O) / Thin Solid Films by G. Cardinale (1992)
  112. E. Bromley, J. Randall, D. Flanders and R. Mountain, J. Vacuum Sci. Techn. B1(4) (1983) 1364. (10.1116/1.582744) / J. Vacuum Sci. Techn. by E. Bromley (1983)
  113. N. Nemeth, O. Jadaan, J. Palko, J. Mitchell and C. Zorman, “Structural Modeling and Probabilistic Characterization of MEMS Pressure Sensor Membranes,” in MEMS: Mechanics and Measurements, Society of Experimental Mechanics Symposium, Portland, Oregon, 2001, p. 46.
  114. P. Sarro, Sens. Actuators A 82 (2000) 210. (10.1016/S0924-4247(99)00335-0) / Sens. Actuators A by P. Sarro (2000)
  115. G. Muller, G. Kroz and E. Niemann, Sens. Actuators A 43 (1994) 259. (10.1016/0924-4247(93)00684-V) / Sens. Actuators A by G. Muller (1994)
  116. H. Windischmann, J. Vacuum Sci. Techn. A 9(4) (1991) 2459. (10.1116/1.577256) / J. Vacuum Sci. Techn. A by H. Windischmann (1991)
  117. V. Pickhardt and D. Smith, J. Vacuum Sci. Techn. 14(3) (1977) 823. (10.1116/1.569276) / J. Vacuum Sci. Techn. by V. Pickhardt (1977)
  118. K. Jackson, G. Dirras, R. Edwards and W. Sharpe, Jr., “Mechanical Properties of 3C Thin-Film Silicon Carbide,” in Proceedings of the 2002 SEM Annual Conference, Milwaukee, 2002, p. 99.
  119. X. Li and B. Bhushan, Thin Solid Films 340 (1999) 210. (10.1016/S0040-6090(98)01153-5) / Thin Solid Films by X. Li (1999)
Dates
Type When
Created 21 years, 9 months ago (Nov. 3, 2003, 7:30 p.m.)
Deposited 1 month, 4 weeks ago (June 24, 2025, 6:20 a.m.)
Indexed 1 month, 4 weeks ago (June 25, 2025, 12:07 a.m.)
Issued 21 years, 10 months ago (Oct. 1, 2003)
Published 21 years, 10 months ago (Oct. 1, 2003)
Published Print 21 years, 10 months ago (Oct. 1, 2003)
Funders 0

None

@article{Jadaan_2003, title={Probabilistic Weibull behavior and mechanical properties of MEMS brittle materials}, volume={38}, ISSN={1573-4803}, url={http://dx.doi.org/10.1023/a:1026317303377}, DOI={10.1023/a:1026317303377}, number={20}, journal={Journal of Materials Science}, publisher={Springer Science and Business Media LLC}, author={Jadaan, O. M. and Nemeth, N. N. and Bagdahn, J. and Sharpe, W. N.}, year={2003}, month=oct, pages={4087–4113} }