DOI: 10.1016/j.progpolymsci.2003.09.003. Strength and toughness of crystalline polymer systems

Strength and toughness of crystalline polymer systems

10.1016/j.progpolymsci.2003.09.003

Crossref journal-article

Elsevier BV

Progress in Polymer Science (78)

Bibliography

Galeski, A. (2003). Strength and toughness of crystalline polymer systems. Progress in Polymer Science, 28(12), 1643â1699.

Authors 1

Andrzej Galeski (first)

References 189 Referenced 511

{'key': '10.1016/j.progpolymsci.2003.09.003_BIB1', 'series-title': 'Comprehensive polymer science: the synthesis, characterization, reaction and applications of polymer', 'first-page': '511', 'article-title': 'Strength and toughness', 'volume': 'vol. 2', 'author': 'Young', 'year': '1989'} / Comprehensive polymer science: the synthesis, characterization, reaction and applications of polymer / Strength and toughness by Young (1989)
10.1007/BFb0018024 / Adv Polym Sci / Crazing and toughness of block copolymers and blends by Argon (1990)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB3', 'series-title': 'Fracture behaviour of polymers', 'author': 'Kinloch', 'year': '1983'} / Fracture behaviour of polymers by Kinloch (1983)
10.1007/3-540-08829-6_3 / Adv Polym Sci / Fracture and failure of multiphase polymers and polymer composites by Bucknall (1978)
10.1007/BFb0018018 / Adv Polym Sci / Fundamental processes of craze growth and fracture by Kramer (1990)
10.1016/0021-9797(74)90240-9 / J Colloid Interface Sci / Cryogenic crazing of crystalline, isotactic polypropylene by Olf (1974)
10.1002/pen.10671 / Polym Engng Sci / Mechanism of fatigue in short glass fiber reinforced polyamide 6 by Horst (1996)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB8', 'series-title': 'Mechanical relaxation spectra of crystalline and amorphous polymers', 'author': 'Boyer', 'year': '1975'} / Mechanical relaxation spectra of crystalline and amorphous polymers by Boyer (1975)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB9', 'series-title': 'Viscoelastic properties of polymers', 'author': 'Ferry', 'year': '1970'} / Viscoelastic properties of polymers by Ferry (1970)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB10', 'first-page': '1', 'article-title': 'Dynamic mechanical properties of crystalline polymer blends. The influence of interfaces and orientation', 'volume': '026', 'author': 'Galeski', 'year': '1990', 'journal-title': 'e-Polymers'} / e-Polymers / Dynamic mechanical properties of crystalline polymer blends. The influence of interfaces and orientation by Galeski (1990)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB11', 'first-page': '185', 'article-title': 'Fracture and strength of solids', 'volume': '12', 'author': 'Orovan', 'year': '1948', 'journal-title': 'Rep Prog Phys'} / Rep Prog Phys / Fracture and strength of solids by Orovan (1948)
10.1016/0032-3861(60)90059-8 / Polymer / The tough-brittle transition in thermoplastics by Vincent (1960)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB13', 'series-title': 'An introduction to the mechanical properties of solid polymers', 'author': 'Ward', 'year': '1993'} / An introduction to the mechanical properties of solid polymers by Ward (1993)
10.1021/ma00218a020 / Macromolecules / Size effect of compliant rubbery particles on craze plasticity in polystyrene by Piorkowska (1990)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB15', 'first-page': '275', 'article-title': 'Microscopic and molecular fundamentals of crazing', 'volume': '52–53', 'author': 'Kramer', 'year': '1983', 'journal-title': 'Adv Polym Sci'} / Adv Polym Sci / Microscopic and molecular fundamentals of crazing by Kramer (1983)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB16', 'series-title': 'Ultimate properties, uniaxial systems', 'volume': 'Suppl vol', 'author': 'Prevorsek', 'year': '1989'} / Ultimate properties, uniaxial systems by Prevorsek (1989)
10.1007/BF00657441 / Colloid Polym Sci / Tensile deformation of high strength and high modulus polyethylene fibers by Van der Werff (1991)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB18', 'series-title': 'Frequency of fracture as a function of temperature and tensile stress', 'author': 'Zhurkov', 'year': '1969'} / Frequency of fracture as a function of temperature and tensile stress by Zhurkov (1969)
10.1007/BF00540553 / J Mater Sci / Deformation mechanisms in crystalline polymers by Bowden (1974)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB20', 'series-title': 'Plastic deformation of amorphous and semi-crystalline materials', 'first-page': '291', 'author': 'Haudin', 'year': '1982'} / Plastic deformation of amorphous and semi-crystalline materials by Haudin (1982)
10.1007/BF01162485 / J Mater Sci / Review: structure and plastic deformation of polyethylene by Lin (1994)
10.1002/pol.1979.180170704 / J Polym Sci Polym Phys Ed / Properties of amorphous and crystallizable hydrocarbon polymers by Raju (1979)
10.1007/BF00366679 / Rheol Acta / Rheology of polydisperse polymers: relationship between intermolecular interactions and molecular weight distribution by Cassagnau (1993)
10.1002/pen.760150316 / Polym Engng Sci / Ultra-high-modulus linear polyethylene through controlled molecular weight and drawing by Capaccio (1975)
10.1002/pol.1976.180140910 / J Polym Sci, Polym Phys Ed / The drawing behavior of linear polyethylene. I. Rate of drawing as a function of polymer molecular weight and initial thermal treatment by Capaccio (1976)
10.1002/pol.1980.180180213 / J Polym Sci, Polym Phys Ed / The drawing behavior of linear polyethylene. II. Effect of draw temperature and molecular weight on draw ratio and modulus by Capaccio (1980)
10.1002/(SICI)1099-0488(19980430)36:6<1005::AID-POLB9>3.0.CO;2-V / J Polym Sci, Polym Phys Ed / High speed melt spinning of poly(l-lactic acid) filaments by Mezgani (1998)
10.1002/app.2022 / J Appl Polym Sci / Development of high-strength fibers from aliphatic polyketones by melt spinning and drawing by Gupta (2001)
10.1002/app.2182 / J Appl Polym Sci / Melt spinning of metallocene catalyzed polypropylene. II. As spun filament structure and properties by Bond (2001)
10.1002/app.11871 / J Appl Polym Sci / Melt spinning and drawing of 2-methyle-1,3-propanediol-substituted poly(ethylene terephtalate) by Suh (2003)
10.1063/1.1681018 / J Chem Phys / Coil-stretch transition of dilute flexible, polymers under ultrahigh velocity gradients by de Gennes (1974)
10.1002/polc.5070590106 / J Polym Sci, Polym Symp / Bundle-like nucleation and longitudinal growth of fibrillar polymer crystals from flowing solutions by Pennings (1977)
10.1007/BF01415506 / Colloid Polym Sci / The extensibility of macromolecules in solution: a new focus for macromolecular science by Keller (1985)
10.1007/BF01775411 / Colloid Polym Sci / Longitudinal growth of polymer crystals from flowing solutions by Zwijnenburg (1976)
Mackley MR, Sapsford GS. Oriented polymer films. European Pat 0230410 1985; assigned to National Research. Develop. Corp. (GB). (10.1002/polc.5070730112)
10.1007/BF00256272 / Polym Bull / Ultrahigh-strength polyethylene filaments by solution spinning and hot drawing by Smith (1979)
10.1002/pol.1981.180190514 / J Polym Sci, Polym Phys Ed / Ultradrawing of high-molecular-weight polyethylene cast from solution. II. Influence of initial polymer concentration by Smith (1981)
10.1002/pol.1982.180201206 / J Polym Sci, Polym Phys Ed / Tensile strength of highly oriented polyethylene. II. Effect of molecular weight distribution by Smith (1982)
10.1002/macp.1979.021801220 / Makromol Chem / Ultra-strength polyethylene filaments by solution spinning/drawing. Part 2 by Smith (1979)
10.1080/00222349608220400 / J Macromol Sci, Phys / Deformation and entanglement in semicrystalline polymers by Plummer (1996)
10.1007/BF01381688 / Colloid Polym Sci / Nascent structures during the polymerization of ethylene by Chanzy (1974)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB42', 'first-page': '343', 'article-title': 'Morphology of nascent ultra-high molecular weight polyethylene reactor powder: chain extended versus chain folded crystals', 'volume': '32', 'author': 'Tervoort-Engel', 'year': '1991', 'journal-title': 'Polym Commun'} / Polym Commun / Morphology of nascent ultra-high molecular weight polyethylene reactor powder: chain extended versus chain folded crystals by Tervoort-Engel (1991)
Bieser JO, Krupp SP, Knickerbocker EN. Method of improving melt spinning of linear polyethylene polymers. US Pat. 5254299 1993; assigned to Dow Chem. Co.
10.1016/0032-3861(91)90440-T / Polymer / A neutron scattering study of the melting behaviour of polyethylene single crystals by Barham (1991)
10.1295/polymj.19.85 / Polym J / Chain extended polyethylene by Lemstra (1987)
10.1021/ma990298h / Macromolecules / Crystallization of polyethylene from melt with lowered chain entanglements by Psarski (2000)
10.1016/0032-3861(87)90352-1 / Polymer / Two-stage drawing of ultra-high molecular weight polyethylene reactor powder by Kanamoto (1987)
Hirofumi K, Yoshimu I, Kazuo M, Akira S, Shigeki Y. Highly oriented polyethylene material. European Pat. 0376423 1990; assigned to Nippon Oil Co.
10.1021/ma970519o / Macromolecules / Chain mobility in polymer systems: on the borderline between solid and melt. 1. Lamellar doubling during annealing of by Rastogi (1997)
10.1021/ma980261h / Macromolecules / Chain mobility in polymer systems: on the borderline between solid and melt. 2. Crystal size influence in phase transition and sintering of ultrahigh molecular weight polyethylene via the mobile hexagonal phase by Rastogi (1998)
10.1007/BF00283086 / Polym Bull / Cross-linking of ultra-high strength polyethylene fibers by means of electron beam irradiation by Dijkstra (1987)
10.1007/BF00255124 / Polym Bull / Crosslinking of ultra-high strength fibers by means of γ-radiation by De Boer (1981)
10.1002/polb.1987.090250701 / J Polym Sci, Part B: Polym Phys / The effect of electron irradiation on the structure and mechanical properties of highly drawn polyethylene fibers by Klein (1987)
10.1007/BF01412706 / Colloid Polym Sci / X-linked ultra high strength polyethylene fibers by Hikmet (1987)
10.1088/0034-4885/31/2/304 / Rep Prog Phys / Polymer crystals by Keller (1968)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB56', 'first-page': '490', 'article-title': 'Radical formation and fracture of highly drawn crystalline polymers', 'volume': '6', 'author': 'Peterlin', 'year': '1971', 'journal-title': 'J Macromol Sci, Phys'} / J Macromol Sci, Phys / Radical formation and fracture of highly drawn crystalline polymers by Peterlin (1971)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB57', 'series-title': 'Crystallography of crystal defects', 'author': 'Kelly', 'year': '1970'} / Crystallography of crystal defects by Kelly (1970)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB58', 'series-title': 'Dislocation and plastic flow in crystals', 'author': 'Cottrell', 'year': '1953'} / Dislocation and plastic flow in crystals by Cottrell (1953)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB59', 'first-page': '23', 'article-title': 'Critical resolved shear stress for [001] slip in polyethylene', 'volume': '229', 'author': 'Bowden', 'year': '1971', 'journal-title': 'Nature'} / Nature / Critical resolved shear stress for [001] slip in polyethylene by Bowden (1971)
10.1021/ma00045a034 / Macromolecules / Deformation mechanisms and plastic resistance in single-crystal-textured high-density polyethylene by Bartczak (1992)
10.1021/ma00041a025 / Macromolecules / Deformation resistance in oriented nylon 6 by Lin (1994)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB62', 'series-title': 'An Introduction to the Mechanical Properties of Solid Polymers', 'author': 'Ward', 'year': '1993'} / An Introduction to the Mechanical Properties of Solid Polymers by Ward (1993)
10.1007/BF00755584 / J Mater Sci / The plastic deformation of oriented polypropylene: tensile and compressive yield criteria by Shinozaki (1973)
10.1007/BF00754900 / J Mater Sci / A yield criterion of anisotropic and pressure dependent solids such as oriented polymers by Caddell (1973)
10.1016/S0032-3861(98)00614-4 / Polymer / Yield and plastic resistance of, α-crystals of isotactic polypropylene by Bartczak (1999)
10.1016/0032-3861(95)93102-R / Polymer / In situ observation of the plastic deformation of polypropylene spherulites under uniaxial tension and simple shear in the scanning electron microscope by Aboulfaraj (1995)
10.1016/S0032-3861(96)00996-2 / Polymer / Orientation and properties of sequentially drawn films of an isotactic polypropylene; hydrogenated oligocyclopentadiene blends by Bartczak (1997)
10.1016/0032-3861(93)90039-D / Polymer / Simulation of large strain plastic deformation and texture evolution in high-density polyethylene by Lee (1993)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB69', 'series-title': 'Plastic deformation of amorphous and semi-crystalline materials', 'first-page': '291', 'article-title': 'Plastic deformation of semi-crystalline polymers', 'author': 'Haudin', 'year': '1982'} / Plastic deformation of amorphous and semi-crystalline materials / Plastic deformation of semi-crystalline polymers by Haudin (1982)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB70', 'series-title': 'An introduction to the mechanical properties of solid polymers', 'author': 'Ward', 'year': '1993'} / An introduction to the mechanical properties of solid polymers by Ward (1993)
10.1016/0032-3861(93)90851-Z / Polymer / Development of texture in poly(ethylene terephthalate) by plane-strain compression by Bellaire (1993)
10.1016/0032-3861(82)90176-8 / Polymer / Biodegradable materials of poly(l-lactic acid): 1 Melt-spun and solution n-spun fibers by Eling (1982)
10.1021/ma00013a032 / Macromolecules / Morphology of bulk nylon 6 subjected to plane strain compression by Galeski (1991)
10.1002/pol.1972.160100216 / J Polym Sci A-2 Notes / Comparison of twinning produced by rolling and annealing in high- and low-density polyethylene by Lewis (1972)
10.1002/app.11284 / J Appl Polym Sci / Deformation of high density polyethylene produced by rolling with side constraints. I. Orientation behavior by Bartczak (2002)
10.1080/14786437408226591 / Philos Mag / Twinning and martensitic transformations in oriented high-density polyethylene by Young (1974)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB77', 'first-page': '76', 'article-title': 'Über einige Ergebnisse der Untersuchung der Korrelation zwischen der Morphologie und den mechanischen Eigenschaften von kristallinen Polymeren', 'volume': '29', 'author': 'Kryszewski', 'year': '1978', 'journal-title': 'Faserforschung u Textiltech'} / Faserforschung u Textiltech / Über einige Ergebnisse der Untersuchung der Korrelation zwischen der Morphologie und den mechanischen Eigenschaften von kristallinen Polymeren by Kryszewski (1978)
10.1021/ma00044a034 / Macromolecules / Evolution of crystalline texture of high-density polyethylene during uniaxial compression by Bartczak (1992)
10.1021/ma00047a023 / Macromolecules / Morphological alterations during texture producing plastic plane strain compression of high density polyethylene by Galeski (1992)
10.1038/272226a0 / Nature / Molecular morphology in semicrystalline polymers by Flory (1978)
10.1002/polb.1989.090270713 / J Polym Sci Polym Phys Ed / Plastic yielding of partially crystalline polymers by Gent (1989)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB82', 'first-page': '86', 'article-title': 'A dislocation model for yield in polyethylene', 'volume': '30', 'author': 'Young', 'year': '1976', 'journal-title': 'Philos Mag'} / Philos Mag / A dislocation model for yield in polyethylene by Young (1976)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB83', 'first-page': '210', 'article-title': 'Screw dislocation model for yield in polyethylene', 'volume': '11', 'author': 'Young', 'year': '1988', 'journal-title': 'Mater Forum'} / Mater Forum / Screw dislocation model for yield in polyethylene by Young (1988)
10.1088/0959-5309/52/1/305 / Proc Phys Soc / The size of dislocations by Peierls (1940)
10.1088/0959-5309/59/2/309 / Proc Phys Soc / Dislocations in a simple cubic lattice by Nabarro (1947)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB86', 'series-title': 'The plastic deformation of metals', 'author': 'Honeycomb', 'year': '1968'} / The plastic deformation of metals by Honeycomb (1968)
10.1103/PhysRev.79.722 / Phys Rev / Multiplication processes for slow moving dislocations by Frank (1950)
10.1080/14786437608223794 / Philos Mag / Dislocation in polyethylene crystals: line energies and deformation modes by Shadrake (1974)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB89', 'first-page': '69', 'article-title': 'Yielding of semicrystalline polyethylene: a quantitative dislocation model', 'volume': '30', 'author': 'Crist', 'year': '1989', 'journal-title': 'Polym Commun'} / Polym Commun / Yielding of semicrystalline polyethylene: a quantitative dislocation model by Crist (1989)
10.1002/polb.1993.090310702 / J Polym Sci Part B Polym Phys / Tensile yield of polyethylene in relation to crystal thickness by Darras (1993)
10.1002/(SICI)1099-0488(19980915)36:12<2177::AID-POLB15>3.0.CO;2-X / J Polym Sci Part B Polym Phys / Temperature and strain-rate dependence of yield stress of polyethylene by Brooks (1998)
10.1021/ma9601878 / Macromolecules / Tensile yield of polyethylene and related copolymers: mechanical and structural evidences of two thermally activated processes by Gaucher-Miri (1997)
10.1002/polb.10118 / J Polym Sci Part B Polym Phys / Dislocation approach to the plastic deformation of semicrystalline polymers: kinetic aspects for polyethylene and polypropylene by Seguela (2002)
10.1002/app.11275 / J Appl Polym Sci / Transformation of polyethylene crystals by high pressure by Kazmierczak (2002)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB95', 'series-title': 'Plastic deformation of polyethylene crystals as a function of crystal thickness', 'author': 'Kazmierczak', 'year': '2003'} / Plastic deformation of polyethylene crystals as a function of crystal thickness by Kazmierczak (2003)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB96', 'series-title': 'Plastic deformation of polyethylene crystals as a function of crystal thickness and compression rate', 'author': 'Kazmierczak', 'year': '2003'} / Plastic deformation of polyethylene crystals as a function of crystal thickness and compression rate by Kazmierczak (2003)
10.1016/S0032-3861(99)00362-6 / Polymer / Temperature and sterns length dependence of the yield stress of polyethylene by Brooks (2000)
10.1002/polb.1990.090281104 / J Polym Sci, Polym Phys Ed / The mechanical properties of random copolymers of ethylene force–elongation relations by Peacock (1990)
10.1016/0032-3861(93)90216-W / Polymer / Isotactic polypropylene; hydrogenated oligo(cyclopentadiene) blends: phase diagram and dynamic-mechanical behaviour of extruded isotropic films by Cimmino (1993)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB100', 'series-title': 'The plastic deformation of metals', 'author': 'Honeycombe', 'year': '1968'} / The plastic deformation of metals by Honeycombe (1968)
10.1080/14786436308209081 / Philos Mag / Work-hardening in niobium single crystals by Mitchell (1963)
10.1098/rsta.1951.0019 / Philos Trans R Soc, Lond / The mechanical behaviour of single crystals of certain face-centered cubic metals by da Andrade (1951)
10.1021/ma00187a021 / Macromolecules / Changes in the morphology of bulk spherulitic nylon 6 due to plastic deformation by Galeski (1989)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB104', 'series-title': 'Plastic deformation of unoriented polymer under tensile load. Advances in Polymer Science and Engineering', 'author': 'Peterlin', 'year': '1972'} / Plastic deformation of unoriented polymer under tensile load. Advances in Polymer Science and Engineering by Peterlin (1972)
10.1002/macp.1987.021880522 / Makromol Chem / Morphology of nylon 6 spherulites in bulk by Galeski (1987)
Galeski A, Krasnikova NP. Unpublished results.
10.1007/BF00356330 / J Mater Sci / Rheology of polypropylene in the solid state by Duffo (1995)
10.1007/BF00550534 / J Mater Sci / In situ observation of the spherulite deformation in polybutene-1(Modification I) by Weynant (1980)
10.1007/BF01469527 / Colloid Polym Sci / The electron microscope characterization of the fine structure of nylon 6. II. On the rearrangement of the structure during cold-drawing by Schaper (1986)
10.1080/00222347508217855 / J Macromol Sci Phys / Dependence of diffusive transport on morphology of crystalline polymers by Peterlin (1975)
10.1080/00222349908248140 / J Macromol Sci Phys / Crazing in semicrystalline polymers by Kausch (1999)
10.1038/325040a0 / Nature / Acoustic emission during crystallization of polymers by Galeski (1987)
10.1002/(SICI)1097-4628(19991107)74:6<1380::AID-APP9>3.0.CO;2-M / J Appl Polym Sci / Effect of negative pressure on melting behaviour of spherulites in thin films of several crystalline polymers by Pawlak (1999)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB114', 'first-page': '137', 'article-title': 'Cavitation during isothermal crystallization of iPP and POM', 'author': 'Piorkowska', 'year': '2002'} / Cavitation during isothermal crystallization of iPP and POM by Piorkowska (2002)
10.1002/1097-4628(20010328)79:13<2439::AID-APP1051>3.0.CO;2-# / J Appl Polym Sci / Cavitation during isothermal crystallization of isotactic polypropylene by Nowacki (2001)
10.1007/BF01452401 / Colloid Polym Sci / Plastic deformation of polymers with fibrous structure by Peterlin (1975)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB117', 'series-title': 'Polymeric materials', 'first-page': '175', 'article-title': 'Plastic deformation of crystalline polymers', 'author': 'Peterlin', 'year': '1975'} / Polymeric materials / Plastic deformation of crystalline polymers by Peterlin (1975)
Lemstra PJ. Process for preparing polyethylene films having a high tensile strength and a high modulus. GB Patent 2164897 1986; assigned to Stamicarbon, NL.
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB119', 'series-title': 'Drawing and hydrostatic extrusion of ultra-high modulus polymers. Ultra-high modulus polymers', 'first-page': '1', 'author': 'Capaccio', 'year': '1979'} / Drawing and hydrostatic extrusion of ultra-high modulus polymers. Ultra-high modulus polymers by Capaccio (1979)
10.1179/146580100101540699 / Plast Rub Comp / Development of continuous die drawing production process for engineered polymer cores for wire ropes by Taraiya (2000)
10.1002/app.11835 / J Appl Polym Sci / Fracture behavior of die-drawn toughened polypropylene by Mohanraj (2003)
10.1002/app.11848 / J Appl Polym Sci / Production and properties of highly oriented polyoxymethylene by die-drawing by Taraiya (2003)
10.1002/pen.760291104 / Polym Engng Sci / 3D structure–property relationships in rolltruded polymers: Part I: Mechanical property enhancement in three directions by Berg (1989)
10.1002/pen.760301103 / Polym Engng Sci / 3D structure-property relationships in rolltruded polymers: Part II: anisotropic yielding and deformation in triaxially oriented polymers by Berg (1990)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB125', 'series-title': 'Rolltrusion processing of polypropylene for property improvement. Polypropylene. An A–Z reference', 'first-page': '728', 'author': 'Magill', 'year': '1999'} / Rolltrusion processing of polypropylene for property improvement. Polypropylene. An A–Z reference by Magill (1999)
10.1080/01496399708000935 / Sep Sci Technol / Rolltruded poly(aryl ether ether ketone) (PEEK) for membrane applications by Ciora (1997)
Bartczak Z, Galeski A, Morawiec J, Przygoda M. Method and apparatus for production of highly oriented polymer shapes. Polish Patent PL-178058 B1 2000; assigned to Centre of Molecular and Macromolecular Studies Polish Academy of Sciences, Lodz, Poland.
10.1016/S0921-5093(01)01194-7 / Mater Sci Engng / Rolling of polymeric materials with side constraints by Morawiec (2001)
10.1002/app.11293 / J Appl Polym Sci / Structure and properties of isotactic polypropylene oriented by rolling with side constraints by Bartczak (2002)
10.1002/pen.760161103 / Polym Engng Sci / A review of techniques for processing ultra-high modulus polymers by Bigg (1976)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB131', 'series-title': 'Toughening of crystalline polymer systems', 'author': 'Galeski', 'year': '2000'} / Toughening of crystalline polymer systems by Galeski (2000)
10.1016/0032-3861(94)90509-6 / Polymer / Uniplanar deformation of isotactic polypropylene: 2. Phase structure by Osawa (1994)
10.1016/0032-3861(94)90510-X / Polymer / Uniplanar oriented isotactic polypropylene: 3 properties and morphology by Osawa (1994)
10.1016/0032-3861(96)85856-3 / Polymer / On the plastic deformation of the amorphous component in semicrystalline polymers by Bartczak (1996)
10.1016/S0032-3861(99)00364-X / Polymer / Changes in the morphology and orientation of bulk spherulitic polypropylene due to plane-strain compression by Pluta (2000)
10.1002/app.11286 / J Appl Polym Sci / Deformation of high density polyethylene produced by rolling with side constraints. II. Mechanical properties of oriented bars by Bartczak (2002)
10.1016/S0032-3861(98)00163-3 / Polymer / Orientation of plane strain-compresses ultra-high-molecular-weight polyethylene by Boontongkong (1998)
10.1080/14786435808243227 / Philos Mag / Defromation processes in polyethylene interpreted in terms of crystal plasticity by Frank (1958)
10.1002/pol.1977.180150502 / J Polym Sci Polym Phys Ed / Structural changes on hot-rolling of polyethylene. I. Crystalline orientation and lamellar deformation by Yoda (1977)
10.1002/polb.1989.090270907 / J Polym Sci Polym Phys Ed / Texture development in polyethylene. II. Unidirectional rolling by Krause (1989)
10.1002/app.11296 / J Appl Polym Sci / High strength uniaxially drawn tapes from scrap recycled poly(ethylene terephtalate) by Morawiec (2002)
10.1002/pol.1979.180170205 / J Polym Sci Polym Phys Ed / Stress-induced crystallization of poly(ethylene terephtalate) by Misra (1979)
10.1002/pol.1959.1203412749 / J Polym Sci / Strain-induced crystallization of polyethylene terephtalate by Thompson (1959)
10.1016/0032-3861(96)88476-X / Polymer / Characterization of strain-induced crystallization of poly(ethylene terephtalate) at fast draw rates using synchrotron radiation by Blundell (1996)
10.1016/S0032-3861(98)00867-2 / Polymer / Finite strain behavior of poly(ethylene terephthalate) above the glass transition temperature by Llana (1999)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB146', 'series-title': 'Calorimetric properties', 'author': 'Van Krevelen', 'year': '1976'} / Calorimetric properties by Van Krevelen (1976)
10.1002/(SICI)1097-4628(19961003)62:1<167::AID-APP21>3.0.CO;2-1 / J Appl Polym Sci / Morphology and texture of high density polyethylene-polystyrene blends deformed by plane-strain compression by Bartczak (1996)
10.1098/rspa.1954.0273 / Proc R Soc (Lond) / The crystal structure of polyethylene terephtalate by Daubeny (1954)
10.1016/0032-3861(93)90498-Y / Polymer / Development of molecular orientation in sequentially drawn PET films by Faisant de Champchesnel (1993)
10.1016/0032-3861(91)90536-R / Polymer / Uniaxial–planar deformation of poly(ethylene terephthalate) films: 1 characterization of the crystalline phase by Lapersonne (1991)
10.1021/ma00013a031 / Macromolecules / Deconvolution of X-ray diffraction data to elucidate plastic deformation mechanisms in the uniaxial extension of bulk nylon 6 by Galeski (1991)
10.1021/j100889a021 / J Phys Chem / Polymer order and polymer density by Robertson (1965)
10.1002/polb.1993.090310206 / J Polym Sci Polym Phys Ed / Characterization of polyethylenes by X-ray diffraction and 13C-NMR: temperature studies and the nature of the amorphous halo by McFaddin (1993)
10.1016/0032-3950(69)90179-8 / Polym Sci USSR / Electron diffraction study of polymer melt structures by Ovchinnikov (1969)
10.1002/macp.1974.021750322 / Makromol Chem / Crystallinity and polymorphism of polyamide 6 by Gurato (1974)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB156', 'first-page': '219', 'article-title': 'Structure of PE melt', 'volume': '19', 'author': 'Kan', 'year': '1976', 'journal-title': 'Rep Prog Polym Phys Jpn'} / Rep Prog Polym Phys Jpn / Structure of PE melt by Kan (1976)
10.1016/0032-3861(82)90267-1 / Polymer / The local structure of molten polyethylene by Mitchell (1982)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB158', 'series-title': 'Physical constants of polyethylene. Polymer handbook', 'first-page': 'V-13', 'author': 'Aggarwal', 'year': '1989'} / Physical constants of polyethylene. Polymer handbook by Aggarwal (1989)
10.1016/0032-3861(78)90123-4 / Polymer / Dynamic mechanical behaviour and longitudinal crystal thickness measurements on ultra-high modulus linear polyethylene: a quantitative model for the elastic modulus by Gibson (1978)
10.1016/0032-3861(95)95286-A / Polymer / The structure of highly textured quasi-single-crystalline high-density polyethylene probed by atomic force microscopy and small-angle X-ray scattering by Schoenherr (1995)
10.1002/(SICI)1099-0488(19970915)35:12<1933::AID-POLB8>3.0.CO;2-Q / J Polym Sci Part B Polym Phys / Viscoelasticity and self-diffusion in melts of entangled linear polymers by Gell (1997)
10.1002/app.11308 / J Appl Polym Sci / Oriented films from recycled poly(ethylene terephtalate); recycled high density polyethylene compatibilized blends by Morawiec (2002)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB163', 'series-title': 'Polymer blends: processing, morphology and properties', 'first-page': '431', 'author': 'Galeski', 'year': '1980'} / Polymer blends: processing, morphology and properties by Galeski (1980)
10.1002/pen.760251704 / Polym Engng Sci / Mechanical properties of polypropylene filled with calcium carbonate by Mitsuishi (1985)
10.1002/app.1981.070261207 / J Appl Polym Sci / Low-density polyethylene filled with chalk and liquid-modifier by Kalinski (1981)
10.1002/app.1982.070271004 / J Appl Polym Sci / High density polyethylene filled with modified chalk by Badran (1982)
10.1007/BF01414651 / Colloid Polym Sci / The role of the liquid agent in mechanical properties improvement of modified chalk filled polyolefins by Kowalewski (1982)
10.1016/0015-0568(83)90049-0 / Fiber Sci Technol / Failure processes in particulate filled polypropylene by Friedrich (1983)
10.1002/app.1983.070280903 / J Appl Polym Sci / Tensile properties of CaCO3-filled polyethylenes by Chacko (1983)
10.1002/pen.760181104 / Polym Engng Sci / Effects of titanate coupling agents on the rheological and mechanical properties of filled polyolefins by Han (1978)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB171', 'first-page': '1254', 'article-title': 'Influence of filler modification by silane coupling agent on properties of composites with kaolin', 'volume': 'A19', 'author': 'Gaehde', 'year': '1977', 'journal-title': 'Vysokomol Sojed (in Russian)'} / Vysokomol Sojed (in Russian) / Influence of filler modification by silane coupling agent on properties of composites with kaolin by Gaehde (1977)
Galeski A, Kalinski R, Kryszewski M. Method of modification of filler particles for filling polymers. Polish Patent 120692 1979; assigned to Centre of Molecular and Macromolecular Studies, Polish Academy of Sciences, Lodz.
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB173', 'first-page': '33', 'article-title': 'Activation treatment of plastics filled with inorganic materials', 'volume': '13', 'author': 'Motoyoshi', 'year': '1975', 'journal-title': 'Jpn Plast Age'} / Jpn Plast Age / Activation treatment of plastics filled with inorganic materials by Motoyoshi (1975)
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB174', 'first-page': '649', 'article-title': 'Polymerization of vinyl monomers on mineral surfaces: a novel method of preparing reinforcing fillers', 'volume': 'A8', 'author': 'Solomon', 'year': '1974', 'journal-title': 'J Macromol Sci'} / J Macromol Sci / Polymerization of vinyl monomers on mineral surfaces: a novel method of preparing reinforcing fillers by Solomon (1974)
Honda S, Hata H, Simura Y, Une S. Method for preparing a porous structure by stretching a resin sheet useful as an electrode separator. US patent 4,024,213 1977; assigned to Sekisui Kagaku Kogyp Kabushiki Kaisha, Osaka, Japan.
Magder J, Reich MH. Method of manufacturing microporous paper-like butene-1 polymer sheets. US patent 4,176,148 1979; assigned to Princeton Chem Res, Princeton, NJ.
Kowalewski T. Drawing and orientation of filled crystalline polymers, PhD thesis. Centre of Molecular and Macromolecular Studies, Polish Academy of Sciences, Lodz, Poland 1988.
{'key': '10.1016/j.progpolymsci.2003.09.003_BIB178', 'series-title': 'Controlled interfaces in composite materials', 'first-page': '623', 'article-title': 'Toughening of crystalline polyolefins containing particulate fillers by interface modification', 'author': 'Galeski', 'year': '2002'} / Controlled interfaces in composite materials / Toughening of crystalline polyolefins containing particulate fillers by interface modification by Galeski (2002)
10.1002/app.1988.070350220 / J Appl Polym Sci / Phase structure and adhesion in polymer blends: a criterion for rubber toughening by Wu (1988)
10.1016/S0032-3861(98)00445-5 / Polymer / Toughness mechanism in semi-crystalline polymer blends: I. High density polyethylene toughened with rubbers by Bartczak (1999)
10.1016/S0032-3861(98)00444-3 / Polymer / Toughness mechanism in semi-crystalline polymer blends: II. High density polyethylene toughened with calcium carbonate filler particles by Bartczak (1999)
10.1016/0032-3861(95)93590-I / Polymer / Toughening mechanism of rubber-modified polyamides by Muratoglu (1995)
10.1016/0032-3861(95)95289-D / Polymer / Crystalline morphology of polyamide-6 near planar surfaces by Muratoglu (1995)
10.1016/00323-8619(59)92934- / Polymer / Microstructural processes of fracture of rubber-modified polyamides by Muratoglu (1995)
10.1016/00323-8619(59)92945- / Polymer / Microstructural fracture processes accompanying growing cracks in tough rubber-modified polyamides by Muratoglu (1995)
Bartczak Z, Galeski A. Toughness filled poly(methylene oxide) with submicron chalk particles. Unpublished results.
Psarski M, Galeski A, Hiltner A. Toughening mechanism in polymers of high and low crystal anisotropy filled with submicron chalk particles. Manuscript in preparation.
Morawiec J, Galeski A. Polypropylene composition containing talc for injection moulded car bumpers. Technical Report #1, Centre of Molecular and Macromolecular Studies, Polish Academy Sciences, Lodz, Poland 1998.
10.1016/S0032-3861(03)00546-9 / Polymer / Toughenability of polymers by Argon (2003)

Dates

Type	When
Created	21 years, 10 months ago (Oct. 16, 2003, 11:12 a.m.)
Deposited	6 years, 6 months ago (Feb. 19, 2019, 10:59 a.m.)
Indexed	1 week ago (Aug. 28, 2025, 8:25 a.m.)
Issued	21 years, 9 months ago (Dec. 1, 2003)
Published	21 years, 9 months ago (Dec. 1, 2003)
Published Print	21 years, 9 months ago (Dec. 1, 2003)

Funders 0

None

BibTeX

@article{Galeski_2003, title={Strength and toughness of crystalline polymer systems}, volume={28}, ISSN={0079-6700}, url={http://dx.doi.org/10.1016/j.progpolymsci.2003.09.003}, DOI={10.1016/j.progpolymsci.2003.09.003}, number={12}, journal={Progress in Polymer Science}, publisher={Elsevier BV}, author={Galeski, Andrzej}, year={2003}, month=dec, pages={1643–1699} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2025,
        8,
        28
      ]
    ],
    "date-time": "2025-08-28T12:25:07Z",
    "timestamp": 1756383907423
  },
  "reference-count": 189,
  "publisher": "Elsevier BV",
  "issue": "12",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            2003,
            12,
            1
          ]
        ],
        "date-time": "2003-12-01T00:00:00Z",
        "timestamp": 1070236800000
      },
      "content-version": "tdm",
      "delay-in-days": 0,
      "URL": "https://www.elsevier.com/tdm/userlicense/1.0/"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        2003,
        12
      ]
    ]
  },
  "DOI": "10.1016/j.progpolymsci.2003.09.003",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2003,
        10,
        16
      ]
    ],
    "date-time": "2003-10-16T15:12:22Z",
    "timestamp": 1066317142000
  },
  "page": "1643-1699",
  "source": "Crossref",
  "is-referenced-by-count": 511,
  "title": "Strength and toughness of crystalline polymer systems",
  "prefix": "10.1016",
  "volume": "28",
  "author": [
    {
      "given": "Andrzej",
      "family": "Galeski",
      "sequence": "first",
      "affiliation": []
    }
  ],
  "member": "78",
  "reference": [
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB1",
      "series-title": "Comprehensive polymer science: the synthesis, characterization, reaction and applications of polymer",
      "first-page": "511",
      "article-title": "Strength and toughness",
      "volume": "vol. 2",
      "author": "Young",
      "year": "1989"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB2",
      "doi-asserted-by": "crossref",
      "first-page": "301",
      "DOI": "10.1007/BFb0018024",
      "article-title": "Crazing and toughness of block copolymers and blends",
      "volume": "91\u201392",
      "author": "Argon",
      "year": "1990",
      "journal-title": "Adv Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB3",
      "series-title": "Fracture behaviour of polymers",
      "author": "Kinloch",
      "year": "1983"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB4",
      "doi-asserted-by": "crossref",
      "first-page": "121",
      "DOI": "10.1007/3-540-08829-6_3",
      "article-title": "Fracture and failure of multiphase polymers and polymer composites",
      "volume": "27",
      "author": "Bucknall",
      "year": "1978",
      "journal-title": "Adv Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB5",
      "doi-asserted-by": "crossref",
      "first-page": "1",
      "DOI": "10.1007/BFb0018018",
      "article-title": "Fundamental processes of craze growth and fracture",
      "volume": "91\u201392",
      "author": "Kramer",
      "year": "1990",
      "journal-title": "Adv Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB6",
      "doi-asserted-by": "crossref",
      "first-page": "628",
      "DOI": "10.1016/0021-9797(74)90240-9",
      "article-title": "Cryogenic crazing of crystalline, isotactic polypropylene",
      "volume": "47",
      "author": "Olf",
      "year": "1974",
      "journal-title": "J Colloid Interface Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB7",
      "doi-asserted-by": "crossref",
      "first-page": "2718",
      "DOI": "10.1002/pen.10671",
      "article-title": "Mechanism of fatigue in short glass fiber reinforced polyamide 6",
      "volume": "36",
      "author": "Horst",
      "year": "1996",
      "journal-title": "Polym Engng Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB8",
      "series-title": "Mechanical relaxation spectra of crystalline and amorphous polymers",
      "author": "Boyer",
      "year": "1975"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB9",
      "series-title": "Viscoelastic properties of polymers",
      "author": "Ferry",
      "year": "1970"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB10",
      "first-page": "1",
      "article-title": "Dynamic mechanical properties of crystalline polymer blends. The influence of interfaces and orientation",
      "volume": "026",
      "author": "Galeski",
      "year": "1990",
      "journal-title": "e-Polymers"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB11",
      "first-page": "185",
      "article-title": "Fracture and strength of solids",
      "volume": "12",
      "author": "Orovan",
      "year": "1948",
      "journal-title": "Rep Prog Phys"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB12",
      "doi-asserted-by": "crossref",
      "first-page": "425",
      "DOI": "10.1016/0032-3861(60)90059-8",
      "article-title": "The tough-brittle transition in thermoplastics",
      "volume": "1",
      "author": "Vincent",
      "year": "1960",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB13",
      "series-title": "An introduction to the mechanical properties of solid polymers",
      "author": "Ward",
      "year": "1993"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB14",
      "doi-asserted-by": "crossref",
      "first-page": "3838",
      "DOI": "10.1021/ma00218a020",
      "article-title": "Size effect of compliant rubbery particles on craze plasticity in polystyrene",
      "volume": "23",
      "author": "Piorkowska",
      "year": "1990",
      "journal-title": "Macromolecules"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB15",
      "first-page": "275",
      "article-title": "Microscopic and molecular fundamentals of crazing",
      "volume": "52\u201353",
      "author": "Kramer",
      "year": "1983",
      "journal-title": "Adv Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB16",
      "series-title": "Ultimate properties, uniaxial systems",
      "volume": "Suppl vol",
      "author": "Prevorsek",
      "year": "1989"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB17",
      "doi-asserted-by": "crossref",
      "first-page": "747",
      "DOI": "10.1007/BF00657441",
      "article-title": "Tensile deformation of high strength and high modulus polyethylene fibers",
      "volume": "269",
      "author": "Van der Werff",
      "year": "1991",
      "journal-title": "Colloid Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB18",
      "series-title": "Frequency of fracture as a function of temperature and tensile stress",
      "author": "Zhurkov",
      "year": "1969"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB19",
      "doi-asserted-by": "crossref",
      "first-page": "2034",
      "DOI": "10.1007/BF00540553",
      "article-title": "Deformation mechanisms in crystalline polymers",
      "volume": "9",
      "author": "Bowden",
      "year": "1974",
      "journal-title": "J Mater Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB20",
      "series-title": "Plastic deformation of amorphous and semi-crystalline materials",
      "first-page": "291",
      "author": "Haudin",
      "year": "1982"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB21",
      "doi-asserted-by": "crossref",
      "first-page": "294",
      "DOI": "10.1007/BF01162485",
      "article-title": "Review: structure and plastic deformation of polyethylene",
      "volume": "29",
      "author": "Lin",
      "year": "1994",
      "journal-title": "J Mater Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB22",
      "doi-asserted-by": "crossref",
      "first-page": "1183",
      "DOI": "10.1002/pol.1979.180170704",
      "article-title": "Properties of amorphous and crystallizable hydrocarbon polymers",
      "volume": "17",
      "author": "Raju",
      "year": "1979",
      "journal-title": "J Polym Sci Polym Phys Ed"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB23",
      "doi-asserted-by": "crossref",
      "first-page": "156",
      "DOI": "10.1007/BF00366679",
      "article-title": "Rheology of polydisperse polymers: relationship between intermolecular interactions and molecular weight distribution",
      "volume": "32",
      "author": "Cassagnau",
      "year": "1993",
      "journal-title": "Rheol Acta"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB24",
      "doi-asserted-by": "crossref",
      "first-page": "219",
      "DOI": "10.1002/pen.760150316",
      "article-title": "Ultra-high-modulus linear polyethylene through controlled molecular weight and drawing",
      "volume": "15",
      "author": "Capaccio",
      "year": "1975",
      "journal-title": "Polym Engng Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB25",
      "doi-asserted-by": "crossref",
      "first-page": "1641",
      "DOI": "10.1002/pol.1976.180140910",
      "article-title": "The drawing behavior of linear polyethylene. I. Rate of drawing as a function of polymer molecular weight and initial thermal treatment",
      "volume": "14",
      "author": "Capaccio",
      "year": "1976",
      "journal-title": "J Polym Sci, Polym Phys Ed"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB26",
      "doi-asserted-by": "crossref",
      "first-page": "301",
      "DOI": "10.1002/pol.1980.180180213",
      "article-title": "The drawing behavior of linear polyethylene. II. Effect of draw temperature and molecular weight on draw ratio and modulus",
      "volume": "18",
      "author": "Capaccio",
      "year": "1980",
      "journal-title": "J Polym Sci, Polym Phys Ed"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB27",
      "doi-asserted-by": "crossref",
      "first-page": "1005",
      "DOI": "10.1002/(SICI)1099-0488(19980430)36:6<1005::AID-POLB9>3.0.CO;2-V",
      "article-title": "High speed melt spinning of poly(l-lactic acid) filaments",
      "volume": "36",
      "author": "Mezgani",
      "year": "1998",
      "journal-title": "J Polym Sci, Polym Phys Ed"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB28",
      "doi-asserted-by": "crossref",
      "first-page": "1794",
      "DOI": "10.1002/app.2022",
      "article-title": "Development of high-strength fibers from aliphatic polyketones by melt spinning and drawing",
      "volume": "82",
      "author": "Gupta",
      "year": "2001",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB29",
      "doi-asserted-by": "crossref",
      "first-page": "3237",
      "DOI": "10.1002/app.2182",
      "article-title": "Melt spinning of metallocene catalyzed polypropylene. II. As spun filament structure and properties",
      "volume": "82",
      "author": "Bond",
      "year": "2001",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB30",
      "doi-asserted-by": "crossref",
      "first-page": "2598",
      "DOI": "10.1002/app.11871",
      "article-title": "Melt spinning and drawing of 2-methyle-1,3-propanediol-substituted poly(ethylene terephtalate)",
      "volume": "88",
      "author": "Suh",
      "year": "2003",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB31",
      "doi-asserted-by": "crossref",
      "first-page": "5030",
      "DOI": "10.1063/1.1681018",
      "article-title": "Coil-stretch transition of dilute flexible, polymers under ultrahigh velocity gradients",
      "volume": "60",
      "author": "de Gennes",
      "year": "1974",
      "journal-title": "J Chem Phys"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB32",
      "doi-asserted-by": "crossref",
      "first-page": "55",
      "DOI": "10.1002/polc.5070590106",
      "article-title": "Bundle-like nucleation and longitudinal growth of fibrillar polymer crystals from flowing solutions",
      "volume": "59",
      "author": "Pennings",
      "year": "1977",
      "journal-title": "J Polym Sci, Polym Symp"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB33",
      "doi-asserted-by": "crossref",
      "first-page": "181",
      "DOI": "10.1007/BF01415506",
      "article-title": "The extensibility of macromolecules in solution: a new focus for macromolecular science",
      "volume": "263",
      "author": "Keller",
      "year": "1985",
      "journal-title": "Colloid Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB34",
      "doi-asserted-by": "crossref",
      "first-page": "868",
      "DOI": "10.1007/BF01775411",
      "article-title": "Longitudinal growth of polymer crystals from flowing solutions",
      "volume": "254",
      "author": "Zwijnenburg",
      "year": "1976",
      "journal-title": "Colloid Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB35",
      "doi-asserted-by": "crossref",
      "unstructured": "Mackley MR, Sapsford GS. Oriented polymer films. European Pat 0230410 1985; assigned to National Research. Develop. Corp. (GB).",
      "DOI": "10.1002/polc.5070730112"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB36",
      "doi-asserted-by": "crossref",
      "first-page": "733",
      "DOI": "10.1007/BF00256272",
      "article-title": "Ultrahigh-strength polyethylene filaments by solution spinning and hot drawing",
      "volume": "1",
      "author": "Smith",
      "year": "1979",
      "journal-title": "Polym Bull"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB37",
      "doi-asserted-by": "crossref",
      "first-page": "877",
      "DOI": "10.1002/pol.1981.180190514",
      "article-title": "Ultradrawing of high-molecular-weight polyethylene cast from solution. II. Influence of initial polymer concentration",
      "volume": "19",
      "author": "Smith",
      "year": "1981",
      "journal-title": "J Polym Sci, Polym Phys Ed"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB38",
      "doi-asserted-by": "crossref",
      "first-page": "2229",
      "DOI": "10.1002/pol.1982.180201206",
      "article-title": "Tensile strength of highly oriented polyethylene. II. Effect of molecular weight distribution",
      "volume": "20",
      "author": "Smith",
      "year": "1982",
      "journal-title": "J Polym Sci, Polym Phys Ed"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB39",
      "doi-asserted-by": "crossref",
      "first-page": "2983",
      "DOI": "10.1002/macp.1979.021801220",
      "article-title": "Ultra-strength polyethylene filaments by solution spinning/drawing. Part 2",
      "volume": "180",
      "author": "Smith",
      "year": "1979",
      "journal-title": "Makromol Chem"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB40",
      "doi-asserted-by": "crossref",
      "first-page": "637",
      "DOI": "10.1080/00222349608220400",
      "article-title": "Deformation and entanglement in semicrystalline polymers",
      "volume": "B35",
      "author": "Plummer",
      "year": "1996",
      "journal-title": "J Macromol Sci, Phys"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB41",
      "doi-asserted-by": "crossref",
      "first-page": "8",
      "DOI": "10.1007/BF01381688",
      "article-title": "Nascent structures during the polymerization of ethylene",
      "volume": "252",
      "author": "Chanzy",
      "year": "1974",
      "journal-title": "Colloid Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB42",
      "first-page": "343",
      "article-title": "Morphology of nascent ultra-high molecular weight polyethylene reactor powder: chain extended versus chain folded crystals",
      "volume": "32",
      "author": "Tervoort-Engel",
      "year": "1991",
      "journal-title": "Polym Commun"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB43",
      "unstructured": "Bieser JO, Krupp SP, Knickerbocker EN. Method of improving melt spinning of linear polyethylene polymers. US Pat. 5254299 1993; assigned to Dow Chem. Co."
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB44",
      "doi-asserted-by": "crossref",
      "first-page": "393",
      "DOI": "10.1016/0032-3861(91)90440-T",
      "article-title": "A neutron scattering study of the melting behaviour of polyethylene single crystals",
      "volume": "32",
      "author": "Barham",
      "year": "1991",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB45",
      "doi-asserted-by": "crossref",
      "first-page": "85",
      "DOI": "10.1295/polymj.19.85",
      "article-title": "Chain extended polyethylene",
      "volume": "19",
      "author": "Lemstra",
      "year": "1987",
      "journal-title": "Polym J"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB46",
      "doi-asserted-by": "crossref",
      "first-page": "916",
      "DOI": "10.1021/ma990298h",
      "article-title": "Crystallization of polyethylene from melt with lowered chain entanglements",
      "volume": "33",
      "author": "Psarski",
      "year": "2000",
      "journal-title": "Macromolecules"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB47",
      "doi-asserted-by": "crossref",
      "first-page": "1517",
      "DOI": "10.1016/0032-3861(87)90352-1",
      "article-title": "Two-stage drawing of ultra-high molecular weight polyethylene reactor powder",
      "volume": "28",
      "author": "Kanamoto",
      "year": "1987",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB48",
      "unstructured": "Hirofumi K, Yoshimu I, Kazuo M, Akira S, Shigeki Y. Highly oriented polyethylene material. European Pat. 0376423 1990; assigned to Nippon Oil Co."
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB49",
      "doi-asserted-by": "crossref",
      "first-page": "7880",
      "DOI": "10.1021/ma970519o",
      "article-title": "Chain mobility in polymer systems: on the borderline between solid and melt. 1. Lamellar doubling during annealing of",
      "volume": "30",
      "author": "Rastogi",
      "year": "1997",
      "journal-title": "Macromolecules"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB50",
      "doi-asserted-by": "crossref",
      "first-page": "5022",
      "DOI": "10.1021/ma980261h",
      "article-title": "Chain mobility in polymer systems: on the borderline between solid and melt. 2. Crystal size influence in phase transition and sintering of ultrahigh molecular weight polyethylene via the mobile hexagonal phase",
      "volume": "31",
      "author": "Rastogi",
      "year": "1998",
      "journal-title": "Macromolecules"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB51",
      "doi-asserted-by": "crossref",
      "first-page": "507",
      "DOI": "10.1007/BF00283086",
      "article-title": "Cross-linking of ultra-high strength polyethylene fibers by means of electron beam irradiation",
      "volume": "17",
      "author": "Dijkstra",
      "year": "1987",
      "journal-title": "Polym Bull"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB52",
      "doi-asserted-by": "crossref",
      "first-page": "317",
      "DOI": "10.1007/BF00255124",
      "article-title": "Crosslinking of ultra-high strength fibers by means of \u03b3-radiation",
      "author": "De Boer",
      "year": "1981",
      "journal-title": "Polym Bull"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB53",
      "doi-asserted-by": "crossref",
      "first-page": "1359",
      "DOI": "10.1002/polb.1987.090250701",
      "article-title": "The effect of electron irradiation on the structure and mechanical properties of highly drawn polyethylene fibers",
      "volume": "25",
      "author": "Klein",
      "year": "1987",
      "journal-title": "J Polym Sci, Part B: Polym Phys"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB54",
      "doi-asserted-by": "crossref",
      "first-page": "185",
      "DOI": "10.1007/BF01412706",
      "article-title": "X-linked ultra high strength polyethylene fibers",
      "volume": "265",
      "author": "Hikmet",
      "year": "1987",
      "journal-title": "Colloid Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB55",
      "doi-asserted-by": "crossref",
      "first-page": "623",
      "DOI": "10.1088/0034-4885/31/2/304",
      "article-title": "Polymer crystals",
      "volume": "31",
      "author": "Keller",
      "year": "1968",
      "journal-title": "Rep Prog Phys"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB56",
      "first-page": "490",
      "article-title": "Radical formation and fracture of highly drawn crystalline polymers",
      "volume": "6",
      "author": "Peterlin",
      "year": "1971",
      "journal-title": "J Macromol Sci, Phys"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB57",
      "series-title": "Crystallography of crystal defects",
      "author": "Kelly",
      "year": "1970"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB58",
      "series-title": "Dislocation and plastic flow in crystals",
      "author": "Cottrell",
      "year": "1953"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB59",
      "first-page": "23",
      "article-title": "Critical resolved shear stress for [001] slip in polyethylene",
      "volume": "229",
      "author": "Bowden",
      "year": "1971",
      "journal-title": "Nature"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB60",
      "doi-asserted-by": "crossref",
      "first-page": "5036",
      "DOI": "10.1021/ma00045a034",
      "article-title": "Deformation mechanisms and plastic resistance in single-crystal-textured high-density polyethylene",
      "volume": "25",
      "author": "Bartczak",
      "year": "1992",
      "journal-title": "Macromolecules"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB61",
      "doi-asserted-by": "crossref",
      "first-page": "4011",
      "DOI": "10.1021/ma00041a025",
      "article-title": "Deformation resistance in oriented nylon 6",
      "volume": "25",
      "author": "Lin",
      "year": "1994",
      "journal-title": "Macromolecules"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB62",
      "series-title": "An Introduction to the Mechanical Properties of Solid Polymers",
      "author": "Ward",
      "year": "1993"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB63",
      "doi-asserted-by": "crossref",
      "first-page": "71",
      "DOI": "10.1007/BF00755584",
      "article-title": "The plastic deformation of oriented polypropylene: tensile and compressive yield criteria",
      "volume": "8",
      "author": "Shinozaki",
      "year": "1973",
      "journal-title": "J Mater Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB64",
      "doi-asserted-by": "crossref",
      "first-page": "1641",
      "DOI": "10.1007/BF00754900",
      "article-title": "A yield criterion of anisotropic and pressure dependent solids such as oriented polymers",
      "volume": "8",
      "author": "Caddell",
      "year": "1973",
      "journal-title": "J Mater Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB65",
      "doi-asserted-by": "crossref",
      "first-page": "3677",
      "DOI": "10.1016/S0032-3861(98)00614-4",
      "article-title": "Yield and plastic resistance of, \u03b1-crystals of isotactic polypropylene",
      "volume": "40",
      "author": "Bartczak",
      "year": "1999",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB66",
      "doi-asserted-by": "crossref",
      "first-page": "731",
      "DOI": "10.1016/0032-3861(95)93102-R",
      "article-title": "In situ observation of the plastic deformation of polypropylene spherulites under uniaxial tension and simple shear in the scanning electron microscope",
      "volume": "36",
      "author": "Aboulfaraj",
      "year": "1995",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB67",
      "doi-asserted-by": "crossref",
      "first-page": "4139",
      "DOI": "10.1016/S0032-3861(96)00996-2",
      "article-title": "Orientation and properties of sequentially drawn films of an isotactic polypropylene; hydrogenated oligocyclopentadiene blends",
      "volume": "38",
      "author": "Bartczak",
      "year": "1997",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB68",
      "doi-asserted-by": "crossref",
      "first-page": "3555",
      "DOI": "10.1016/0032-3861(93)90039-D",
      "article-title": "Simulation of large strain plastic deformation and texture evolution in high-density polyethylene",
      "volume": "34",
      "author": "Lee",
      "year": "1993",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB69",
      "series-title": "Plastic deformation of amorphous and semi-crystalline materials",
      "first-page": "291",
      "article-title": "Plastic deformation of semi-crystalline polymers",
      "author": "Haudin",
      "year": "1982"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB70",
      "series-title": "An introduction to the mechanical properties of solid polymers",
      "author": "Ward",
      "year": "1993"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB71",
      "doi-asserted-by": "crossref",
      "first-page": "1393",
      "DOI": "10.1016/0032-3861(93)90851-Z",
      "article-title": "Development of texture in poly(ethylene terephthalate) by plane-strain compression",
      "volume": "34",
      "author": "Bellaire",
      "year": "1993",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB72",
      "doi-asserted-by": "crossref",
      "first-page": "1587",
      "DOI": "10.1016/0032-3861(82)90176-8",
      "article-title": "Biodegradable materials of poly(l-lactic acid): 1 Melt-spun and solution n-spun fibers",
      "volume": "23",
      "author": "Eling",
      "year": "1982",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB73",
      "doi-asserted-by": "crossref",
      "first-page": "3953",
      "DOI": "10.1021/ma00013a032",
      "article-title": "Morphology of bulk nylon 6 subjected to plane strain compression",
      "volume": "24",
      "author": "Galeski",
      "year": "1991",
      "journal-title": "Macromolecules"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB74",
      "doi-asserted-by": "crossref",
      "first-page": "369",
      "DOI": "10.1002/pol.1972.160100216",
      "article-title": "Comparison of twinning produced by rolling and annealing in high- and low-density polyethylene",
      "volume": "10",
      "author": "Lewis",
      "year": "1972",
      "journal-title": "J Polym Sci A-2 Notes"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB75",
      "doi-asserted-by": "crossref",
      "first-page": "1396",
      "DOI": "10.1002/app.11284",
      "article-title": "Deformation of high density polyethylene produced by rolling with side constraints. I. Orientation behavior",
      "volume": "86",
      "author": "Bartczak",
      "year": "2002",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB76",
      "doi-asserted-by": "crossref",
      "first-page": "1061",
      "DOI": "10.1080/14786437408226591",
      "article-title": "Twinning and martensitic transformations in oriented high-density polyethylene",
      "volume": "29",
      "author": "Young",
      "year": "1974",
      "journal-title": "Philos Mag"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB77",
      "first-page": "76",
      "article-title": "\u00dcber einige Ergebnisse der Untersuchung der Korrelation zwischen der Morphologie und den mechanischen Eigenschaften von kristallinen Polymeren",
      "volume": "29",
      "author": "Kryszewski",
      "year": "1978",
      "journal-title": "Faserforschung u Textiltech"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB78",
      "doi-asserted-by": "crossref",
      "first-page": "4692",
      "DOI": "10.1021/ma00044a034",
      "article-title": "Evolution of crystalline texture of high-density polyethylene during uniaxial compression",
      "volume": "25",
      "author": "Bartczak",
      "year": "1992",
      "journal-title": "Macromolecules"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB79",
      "doi-asserted-by": "crossref",
      "first-page": "5705",
      "DOI": "10.1021/ma00047a023",
      "article-title": "Morphological alterations during texture producing plastic plane strain compression of high density polyethylene",
      "volume": "25",
      "author": "Galeski",
      "year": "1992",
      "journal-title": "Macromolecules"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB80",
      "doi-asserted-by": "crossref",
      "first-page": "226",
      "DOI": "10.1038/272226a0",
      "article-title": "Molecular morphology in semicrystalline polymers",
      "volume": "272",
      "author": "Flory",
      "year": "1978",
      "journal-title": "Nature"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB81",
      "doi-asserted-by": "crossref",
      "first-page": "1529",
      "DOI": "10.1002/polb.1989.090270713",
      "article-title": "Plastic yielding of partially crystalline polymers",
      "volume": "27",
      "author": "Gent",
      "year": "1989",
      "journal-title": "J Polym Sci Polym Phys Ed"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB82",
      "first-page": "86",
      "article-title": "A dislocation model for yield in polyethylene",
      "volume": "30",
      "author": "Young",
      "year": "1976",
      "journal-title": "Philos Mag"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB83",
      "first-page": "210",
      "article-title": "Screw dislocation model for yield in polyethylene",
      "volume": "11",
      "author": "Young",
      "year": "1988",
      "journal-title": "Mater Forum"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB84",
      "doi-asserted-by": "crossref",
      "first-page": "34",
      "DOI": "10.1088/0959-5309/52/1/305",
      "article-title": "The size of dislocations",
      "volume": "28952",
      "author": "Peierls",
      "year": "1940",
      "journal-title": "Proc Phys Soc"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB85",
      "doi-asserted-by": "crossref",
      "first-page": "256",
      "DOI": "10.1088/0959-5309/59/2/309",
      "article-title": "Dislocations in a simple cubic lattice",
      "volume": "59",
      "author": "Nabarro",
      "year": "1947",
      "journal-title": "Proc Phys Soc"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB86",
      "series-title": "The plastic deformation of metals",
      "author": "Honeycomb",
      "year": "1968"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB87",
      "doi-asserted-by": "crossref",
      "first-page": "722",
      "DOI": "10.1103/PhysRev.79.722",
      "article-title": "Multiplication processes for slow moving dislocations",
      "volume": "79",
      "author": "Frank",
      "year": "1950",
      "journal-title": "Phys Rev"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB88",
      "doi-asserted-by": "crossref",
      "first-page": "565",
      "DOI": "10.1080/14786437608223794",
      "article-title": "Dislocation in polyethylene crystals: line energies and deformation modes",
      "volume": "34",
      "author": "Shadrake",
      "year": "1974",
      "journal-title": "Philos Mag"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB89",
      "first-page": "69",
      "article-title": "Yielding of semicrystalline polyethylene: a quantitative dislocation model",
      "volume": "30",
      "author": "Crist",
      "year": "1989",
      "journal-title": "Polym Commun"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB90",
      "doi-asserted-by": "crossref",
      "first-page": "759",
      "DOI": "10.1002/polb.1993.090310702",
      "article-title": "Tensile yield of polyethylene in relation to crystal thickness",
      "volume": "31",
      "author": "Darras",
      "year": "1993",
      "journal-title": "J Polym Sci Part B Polym Phys"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB91",
      "doi-asserted-by": "crossref",
      "first-page": "2177",
      "DOI": "10.1002/(SICI)1099-0488(19980915)36:12<2177::AID-POLB15>3.0.CO;2-X",
      "article-title": "Temperature and strain-rate dependence of yield stress of polyethylene",
      "volume": "36",
      "author": "Brooks",
      "year": "1998",
      "journal-title": "J Polym Sci Part B Polym Phys"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB92",
      "doi-asserted-by": "crossref",
      "first-page": "1158",
      "DOI": "10.1021/ma9601878",
      "article-title": "Tensile yield of polyethylene and related copolymers: mechanical and structural evidences of two thermally activated processes",
      "volume": "30",
      "author": "Gaucher-Miri",
      "year": "1997",
      "journal-title": "Macromolecules"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB93",
      "doi-asserted-by": "crossref",
      "first-page": "593",
      "DOI": "10.1002/polb.10118",
      "article-title": "Dislocation approach to the plastic deformation of semicrystalline polymers: kinetic aspects for polyethylene and polypropylene",
      "volume": "40",
      "author": "Seguela",
      "year": "2002",
      "journal-title": "J Polym Sci Part B Polym Phys"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB94",
      "doi-asserted-by": "crossref",
      "first-page": "1337",
      "DOI": "10.1002/app.11275",
      "article-title": "Transformation of polyethylene crystals by high pressure",
      "volume": "86",
      "author": "Kazmierczak",
      "year": "2002",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB95",
      "series-title": "Plastic deformation of polyethylene crystals as a function of crystal thickness",
      "author": "Kazmierczak",
      "year": "2003"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB96",
      "series-title": "Plastic deformation of polyethylene crystals as a function of crystal thickness and compression rate",
      "author": "Kazmierczak",
      "year": "2003"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB97",
      "doi-asserted-by": "crossref",
      "first-page": "1475",
      "DOI": "10.1016/S0032-3861(99)00362-6",
      "article-title": "Temperature and sterns length dependence of the yield stress of polyethylene",
      "volume": "41",
      "author": "Brooks",
      "year": "2000",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB98",
      "doi-asserted-by": "crossref",
      "first-page": "1917",
      "DOI": "10.1002/polb.1990.090281104",
      "article-title": "The mechanical properties of random copolymers of ethylene force\u2013elongation relations",
      "volume": "28",
      "author": "Peacock",
      "year": "1990",
      "journal-title": "J Polym Sci, Polym Phys Ed"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB99",
      "doi-asserted-by": "crossref",
      "first-page": "972",
      "DOI": "10.1016/0032-3861(93)90216-W",
      "article-title": "Isotactic polypropylene; hydrogenated oligo(cyclopentadiene) blends: phase diagram and dynamic-mechanical behaviour of extruded isotropic films",
      "volume": "34",
      "author": "Cimmino",
      "year": "1993",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB100",
      "series-title": "The plastic deformation of metals",
      "author": "Honeycombe",
      "year": "1968"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB101",
      "doi-asserted-by": "crossref",
      "first-page": "1895",
      "DOI": "10.1080/14786436308209081",
      "article-title": "Work-hardening in niobium single crystals",
      "volume": "8",
      "author": "Mitchell",
      "year": "1963",
      "journal-title": "Philos Mag"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB102",
      "doi-asserted-by": "crossref",
      "first-page": "177",
      "DOI": "10.1098/rsta.1951.0019",
      "article-title": "The mechanical behaviour of single crystals of certain face-centered cubic metals",
      "volume": "244",
      "author": "da Andrade",
      "year": "1951",
      "journal-title": "Philos Trans R Soc, Lond"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB103",
      "doi-asserted-by": "crossref",
      "first-page": "2761",
      "DOI": "10.1021/ma00187a021",
      "article-title": "Changes in the morphology of bulk spherulitic nylon 6 due to plastic deformation",
      "volume": "21",
      "author": "Galeski",
      "year": "1989",
      "journal-title": "Macromolecules"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB104",
      "series-title": "Plastic deformation of unoriented polymer under tensile load. Advances in Polymer Science and Engineering",
      "author": "Peterlin",
      "year": "1972"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB105",
      "doi-asserted-by": "crossref",
      "first-page": "1195",
      "DOI": "10.1002/macp.1987.021880522",
      "article-title": "Morphology of nylon 6 spherulites in bulk",
      "volume": "188",
      "author": "Galeski",
      "year": "1987",
      "journal-title": "Makromol Chem"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB106",
      "unstructured": "Galeski A, Krasnikova NP. Unpublished results."
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB107",
      "doi-asserted-by": "crossref",
      "first-page": "701",
      "DOI": "10.1007/BF00356330",
      "article-title": "Rheology of polypropylene in the solid state",
      "volume": "30",
      "author": "Duffo",
      "year": "1995",
      "journal-title": "J Mater Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB108",
      "doi-asserted-by": "crossref",
      "first-page": "2677",
      "DOI": "10.1007/BF00550534",
      "article-title": "In situ observation of the spherulite deformation in polybutene-1(Modification I)",
      "volume": "15",
      "author": "Weynant",
      "year": "1980",
      "journal-title": "J Mater Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB109",
      "doi-asserted-by": "crossref",
      "first-page": "668",
      "DOI": "10.1007/BF01469527",
      "article-title": "The electron microscope characterization of the fine structure of nylon 6. II. On the rearrangement of the structure during cold-drawing",
      "volume": "264",
      "author": "Schaper",
      "year": "1986",
      "journal-title": "Colloid Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB110",
      "doi-asserted-by": "crossref",
      "first-page": "57",
      "DOI": "10.1080/00222347508217855",
      "article-title": "Dependence of diffusive transport on morphology of crystalline polymers",
      "volume": "B11",
      "author": "Peterlin",
      "year": "1975",
      "journal-title": "J Macromol Sci Phys"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB111",
      "doi-asserted-by": "crossref",
      "first-page": "803",
      "DOI": "10.1080/00222349908248140",
      "article-title": "Crazing in semicrystalline polymers",
      "volume": "B38",
      "author": "Kausch",
      "year": "1999",
      "journal-title": "J Macromol Sci Phys"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB112",
      "doi-asserted-by": "crossref",
      "first-page": "40",
      "DOI": "10.1038/325040a0",
      "article-title": "Acoustic emission during crystallization of polymers",
      "volume": "325",
      "author": "Galeski",
      "year": "1987",
      "journal-title": "Nature"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB113",
      "doi-asserted-by": "crossref",
      "first-page": "1380",
      "DOI": "10.1002/(SICI)1097-4628(19991107)74:6<1380::AID-APP9>3.0.CO;2-M",
      "article-title": "Effect of negative pressure on melting behaviour of spherulites in thin films of several crystalline polymers",
      "volume": "74",
      "author": "Pawlak",
      "year": "1999",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB114",
      "first-page": "137",
      "article-title": "Cavitation during isothermal crystallization of iPP and POM",
      "author": "Piorkowska",
      "year": "2002"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB115",
      "doi-asserted-by": "crossref",
      "first-page": "2439",
      "DOI": "10.1002/1097-4628(20010328)79:13<2439::AID-APP1051>3.0.CO;2-#",
      "article-title": "Cavitation during isothermal crystallization of isotactic polypropylene",
      "volume": "79",
      "author": "Nowacki",
      "year": "2001",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB116",
      "doi-asserted-by": "crossref",
      "first-page": "809",
      "DOI": "10.1007/BF01452401",
      "article-title": "Plastic deformation of polymers with fibrous structure",
      "volume": "253",
      "author": "Peterlin",
      "year": "1975",
      "journal-title": "Colloid Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB117",
      "series-title": "Polymeric materials",
      "first-page": "175",
      "article-title": "Plastic deformation of crystalline polymers",
      "author": "Peterlin",
      "year": "1975"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB118",
      "unstructured": "Lemstra PJ. Process for preparing polyethylene films having a high tensile strength and a high modulus. GB Patent 2164897 1986; assigned to Stamicarbon, NL."
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB119",
      "series-title": "Drawing and hydrostatic extrusion of ultra-high modulus polymers. Ultra-high modulus polymers",
      "first-page": "1",
      "author": "Capaccio",
      "year": "1979"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB120",
      "doi-asserted-by": "crossref",
      "first-page": "46",
      "DOI": "10.1179/146580100101540699",
      "article-title": "Development of continuous die drawing production process for engineered polymer cores for wire ropes",
      "volume": "29",
      "author": "Taraiya",
      "year": "2000",
      "journal-title": "Plast Rub Comp"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB121",
      "doi-asserted-by": "crossref",
      "first-page": "1336",
      "DOI": "10.1002/app.11835",
      "article-title": "Fracture behavior of die-drawn toughened polypropylene",
      "volume": "88",
      "author": "Mohanraj",
      "year": "2003",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB122",
      "doi-asserted-by": "crossref",
      "first-page": "1268",
      "DOI": "10.1002/app.11848",
      "article-title": "Production and properties of highly oriented polyoxymethylene by die-drawing",
      "volume": "88",
      "author": "Taraiya",
      "year": "2003",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB123",
      "doi-asserted-by": "crossref",
      "first-page": "715",
      "DOI": "10.1002/pen.760291104",
      "article-title": "3D structure\u2013property relationships in rolltruded polymers: Part I: Mechanical property enhancement in three directions",
      "volume": "29",
      "author": "Berg",
      "year": "1989",
      "journal-title": "Polym Engng Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB124",
      "doi-asserted-by": "crossref",
      "first-page": "635",
      "DOI": "10.1002/pen.760301103",
      "article-title": "3D structure-property relationships in rolltruded polymers: Part II: anisotropic yielding and deformation in triaxially oriented polymers",
      "volume": "30",
      "author": "Berg",
      "year": "1990",
      "journal-title": "Polym Engng Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB125",
      "series-title": "Rolltrusion processing of polypropylene for property improvement. Polypropylene. An A\u2013Z reference",
      "first-page": "728",
      "author": "Magill",
      "year": "1999"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB126",
      "doi-asserted-by": "crossref",
      "first-page": "899",
      "DOI": "10.1080/01496399708000935",
      "article-title": "Rolltruded poly(aryl ether ether ketone) (PEEK) for membrane applications",
      "volume": "32",
      "author": "Ciora",
      "year": "1997",
      "journal-title": "Sep Sci Technol"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB127",
      "unstructured": "Bartczak Z, Galeski A, Morawiec J, Przygoda M. Method and apparatus for production of highly oriented polymer shapes. Polish Patent PL-178058 B1 2000; assigned to Centre of Molecular and Macromolecular Studies Polish Academy of Sciences, Lodz, Poland."
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB128",
      "doi-asserted-by": "crossref",
      "first-page": "21",
      "DOI": "10.1016/S0921-5093(01)01194-7",
      "article-title": "Rolling of polymeric materials with side constraints",
      "volume": "A317",
      "author": "Morawiec",
      "year": "2001",
      "journal-title": "Mater Sci Engng"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB129",
      "doi-asserted-by": "crossref",
      "first-page": "1413",
      "DOI": "10.1002/app.11293",
      "article-title": "Structure and properties of isotactic polypropylene oriented by rolling with side constraints",
      "volume": "86",
      "author": "Bartczak",
      "year": "2002",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB130",
      "doi-asserted-by": "crossref",
      "first-page": "725",
      "DOI": "10.1002/pen.760161103",
      "article-title": "A review of techniques for processing ultra-high modulus polymers",
      "volume": "16",
      "author": "Bigg",
      "year": "1976",
      "journal-title": "Polym Engng Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB131",
      "series-title": "Toughening of crystalline polymer systems",
      "author": "Galeski",
      "year": "2000"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB132",
      "doi-asserted-by": "crossref",
      "first-page": "545",
      "DOI": "10.1016/0032-3861(94)90509-6",
      "article-title": "Uniplanar deformation of isotactic polypropylene: 2. Phase structure",
      "volume": "35",
      "author": "Osawa",
      "year": "1994",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB133",
      "doi-asserted-by": "crossref",
      "first-page": "551",
      "DOI": "10.1016/0032-3861(94)90510-X",
      "article-title": "Uniplanar oriented isotactic polypropylene: 3 properties and morphology",
      "volume": "35",
      "author": "Osawa",
      "year": "1994",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB134",
      "doi-asserted-by": "crossref",
      "first-page": "2113",
      "DOI": "10.1016/0032-3861(96)85856-3",
      "article-title": "On the plastic deformation of the amorphous component in semicrystalline polymers",
      "volume": "37",
      "author": "Bartczak",
      "year": "1996",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB135",
      "doi-asserted-by": "crossref",
      "first-page": "2271",
      "DOI": "10.1016/S0032-3861(99)00364-X",
      "article-title": "Changes in the morphology and orientation of bulk spherulitic polypropylene due to plane-strain compression",
      "volume": "41",
      "author": "Pluta",
      "year": "2000",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB136",
      "doi-asserted-by": "crossref",
      "first-page": "1405",
      "DOI": "10.1002/app.11286",
      "article-title": "Deformation of high density polyethylene produced by rolling with side constraints. II. Mechanical properties of oriented bars",
      "volume": "86",
      "author": "Bartczak",
      "year": "2002",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB137",
      "doi-asserted-by": "crossref",
      "first-page": "6391",
      "DOI": "10.1016/S0032-3861(98)00163-3",
      "article-title": "Orientation of plane strain-compresses ultra-high-molecular-weight polyethylene",
      "volume": "39",
      "author": "Boontongkong",
      "year": "1998",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB138",
      "doi-asserted-by": "crossref",
      "first-page": "64",
      "DOI": "10.1080/14786435808243227",
      "article-title": "Defromation processes in polyethylene interpreted in terms of crystal plasticity",
      "volume": "3",
      "author": "Frank",
      "year": "1958",
      "journal-title": "Philos Mag"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB139",
      "doi-asserted-by": "crossref",
      "first-page": "773",
      "DOI": "10.1002/pol.1977.180150502",
      "article-title": "Structural changes on hot-rolling of polyethylene. I. Crystalline orientation and lamellar deformation",
      "volume": "15",
      "author": "Yoda",
      "year": "1977",
      "journal-title": "J Polym Sci Polym Phys Ed"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB140",
      "doi-asserted-by": "crossref",
      "first-page": "1867",
      "DOI": "10.1002/polb.1989.090270907",
      "article-title": "Texture development in polyethylene. II. Unidirectional rolling",
      "volume": "27",
      "author": "Krause",
      "year": "1989",
      "journal-title": "J Polym Sci Polym Phys Ed"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB141",
      "doi-asserted-by": "crossref",
      "first-page": "1426",
      "DOI": "10.1002/app.11296",
      "article-title": "High strength uniaxially drawn tapes from scrap recycled poly(ethylene terephtalate)",
      "volume": "86",
      "author": "Morawiec",
      "year": "2002",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB142",
      "doi-asserted-by": "crossref",
      "first-page": "235",
      "DOI": "10.1002/pol.1979.180170205",
      "article-title": "Stress-induced crystallization of poly(ethylene terephtalate)",
      "volume": "17",
      "author": "Misra",
      "year": "1979",
      "journal-title": "J Polym Sci Polym Phys Ed"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB143",
      "doi-asserted-by": "crossref",
      "first-page": "741",
      "DOI": "10.1002/pol.1959.1203412749",
      "article-title": "Strain-induced crystallization of polyethylene terephtalate",
      "volume": "34",
      "author": "Thompson",
      "year": "1959",
      "journal-title": "J Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB144",
      "doi-asserted-by": "crossref",
      "first-page": "3303",
      "DOI": "10.1016/0032-3861(96)88476-X",
      "article-title": "Characterization of strain-induced crystallization of poly(ethylene terephtalate) at fast draw rates using synchrotron radiation",
      "volume": "37",
      "author": "Blundell",
      "year": "1996",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB145",
      "doi-asserted-by": "crossref",
      "first-page": "6729",
      "DOI": "10.1016/S0032-3861(98)00867-2",
      "article-title": "Finite strain behavior of poly(ethylene terephthalate) above the glass transition temperature",
      "volume": "40",
      "author": "Llana",
      "year": "1999",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB146",
      "series-title": "Calorimetric properties",
      "author": "Van Krevelen",
      "year": "1976"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB147",
      "doi-asserted-by": "crossref",
      "first-page": "167",
      "DOI": "10.1002/(SICI)1097-4628(19961003)62:1<167::AID-APP21>3.0.CO;2-1",
      "article-title": "Morphology and texture of high density polyethylene-polystyrene blends deformed by plane-strain compression",
      "volume": "62",
      "author": "Bartczak",
      "year": "1996",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB148",
      "doi-asserted-by": "crossref",
      "first-page": "531",
      "DOI": "10.1098/rspa.1954.0273",
      "article-title": "The crystal structure of polyethylene terephtalate",
      "volume": "A226",
      "author": "Daubeny",
      "year": "1954",
      "journal-title": "Proc R Soc (Lond)"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB149",
      "doi-asserted-by": "crossref",
      "first-page": "3763",
      "DOI": "10.1016/0032-3861(93)90498-Y",
      "article-title": "Development of molecular orientation in sequentially drawn PET films",
      "volume": "34",
      "author": "Faisant de Champchesnel",
      "year": "1993",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB150",
      "doi-asserted-by": "crossref",
      "first-page": "3331",
      "DOI": "10.1016/0032-3861(91)90536-R",
      "article-title": "Uniaxial\u2013planar deformation of poly(ethylene terephthalate) films: 1 characterization of the crystalline phase",
      "volume": "32",
      "author": "Lapersonne",
      "year": "1991",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB151",
      "doi-asserted-by": "crossref",
      "first-page": "3945",
      "DOI": "10.1021/ma00013a031",
      "article-title": "Deconvolution of X-ray diffraction data to elucidate plastic deformation mechanisms in the uniaxial extension of bulk nylon 6",
      "volume": "24",
      "author": "Galeski",
      "year": "1991",
      "journal-title": "Macromolecules"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB152",
      "doi-asserted-by": "crossref",
      "first-page": "1575",
      "DOI": "10.1021/j100889a021",
      "article-title": "Polymer order and polymer density",
      "volume": "69",
      "author": "Robertson",
      "year": "1965",
      "journal-title": "J Phys Chem"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB153",
      "doi-asserted-by": "crossref",
      "first-page": "175",
      "DOI": "10.1002/polb.1993.090310206",
      "article-title": "Characterization of polyethylenes by X-ray diffraction and 13C-NMR: temperature studies and the nature of the amorphous halo",
      "volume": "31",
      "author": "McFaddin",
      "year": "1993",
      "journal-title": "J Polym Sci Polym Phys Ed"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB154",
      "doi-asserted-by": "crossref",
      "first-page": "369",
      "DOI": "10.1016/0032-3950(69)90179-8",
      "article-title": "Electron diffraction study of polymer melt structures",
      "volume": "11",
      "author": "Ovchinnikov",
      "year": "1969",
      "journal-title": "Polym Sci USSR"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB155",
      "doi-asserted-by": "crossref",
      "first-page": "953",
      "DOI": "10.1002/macp.1974.021750322",
      "article-title": "Crystallinity and polymorphism of polyamide 6",
      "volume": "175",
      "author": "Gurato",
      "year": "1974",
      "journal-title": "Makromol Chem"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB156",
      "first-page": "219",
      "article-title": "Structure of PE melt",
      "volume": "19",
      "author": "Kan",
      "year": "1976",
      "journal-title": "Rep Prog Polym Phys Jpn"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB157",
      "doi-asserted-by": "crossref",
      "first-page": "1273",
      "DOI": "10.1016/0032-3861(82)90267-1",
      "article-title": "The local structure of molten polyethylene",
      "volume": "23",
      "author": "Mitchell",
      "year": "1982",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB158",
      "series-title": "Physical constants of polyethylene. Polymer handbook",
      "first-page": "V-13",
      "author": "Aggarwal",
      "year": "1989"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB159",
      "doi-asserted-by": "crossref",
      "first-page": "683",
      "DOI": "10.1016/0032-3861(78)90123-4",
      "article-title": "Dynamic mechanical behaviour and longitudinal crystal thickness measurements on ultra-high modulus linear polyethylene: a quantitative model for the elastic modulus",
      "volume": "19",
      "author": "Gibson",
      "year": "1978",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB160",
      "doi-asserted-by": "crossref",
      "first-page": "2115",
      "DOI": "10.1016/0032-3861(95)95286-A",
      "article-title": "The structure of highly textured quasi-single-crystalline high-density polyethylene probed by atomic force microscopy and small-angle X-ray scattering",
      "volume": "36",
      "author": "Schoenherr",
      "year": "1995",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB161",
      "doi-asserted-by": "crossref",
      "first-page": "1933",
      "DOI": "10.1002/(SICI)1099-0488(19970915)35:12<1933::AID-POLB8>3.0.CO;2-Q",
      "article-title": "Viscoelasticity and self-diffusion in melts of entangled linear polymers",
      "volume": "35",
      "author": "Gell",
      "year": "1997",
      "journal-title": "J Polym Sci Part B Polym Phys"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB162",
      "doi-asserted-by": "crossref",
      "first-page": "1486",
      "DOI": "10.1002/app.11308",
      "article-title": "Oriented films from recycled poly(ethylene terephtalate); recycled high density polyethylene compatibilized blends",
      "volume": "86",
      "author": "Morawiec",
      "year": "2002",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB163",
      "series-title": "Polymer blends: processing, morphology and properties",
      "first-page": "431",
      "author": "Galeski",
      "year": "1980"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB164",
      "doi-asserted-by": "crossref",
      "first-page": "1069",
      "DOI": "10.1002/pen.760251704",
      "article-title": "Mechanical properties of polypropylene filled with calcium carbonate",
      "volume": "25",
      "author": "Mitsuishi",
      "year": "1985",
      "journal-title": "Polym Engng Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB165",
      "doi-asserted-by": "crossref",
      "first-page": "4047",
      "DOI": "10.1002/app.1981.070261207",
      "article-title": "Low-density polyethylene filled with chalk and liquid-modifier",
      "volume": "26",
      "author": "Kalinski",
      "year": "1981",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB166",
      "doi-asserted-by": "crossref",
      "first-page": "3669",
      "DOI": "10.1002/app.1982.070271004",
      "article-title": "High density polyethylene filled with modified chalk",
      "volume": "27",
      "author": "Badran",
      "year": "1982",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB167",
      "doi-asserted-by": "crossref",
      "first-page": "652",
      "DOI": "10.1007/BF01414651",
      "article-title": "The role of the liquid agent in mechanical properties improvement of modified chalk filled polyolefins",
      "volume": "260",
      "author": "Kowalewski",
      "year": "1982",
      "journal-title": "Colloid Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB168",
      "doi-asserted-by": "crossref",
      "first-page": "37",
      "DOI": "10.1016/0015-0568(83)90049-0",
      "article-title": "Failure processes in particulate filled polypropylene",
      "volume": "18",
      "author": "Friedrich",
      "year": "1983",
      "journal-title": "Fiber Sci Technol"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB169",
      "doi-asserted-by": "crossref",
      "first-page": "2701",
      "DOI": "10.1002/app.1983.070280903",
      "article-title": "Tensile properties of CaCO3-filled polyethylenes",
      "volume": "28",
      "author": "Chacko",
      "year": "1983",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB170",
      "doi-asserted-by": "crossref",
      "first-page": "849",
      "DOI": "10.1002/pen.760181104",
      "article-title": "Effects of titanate coupling agents on the rheological and mechanical properties of filled polyolefins",
      "volume": "18",
      "author": "Han",
      "year": "1978",
      "journal-title": "Polym Engng Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB171",
      "first-page": "1254",
      "article-title": "Influence of filler modification by silane coupling agent on properties of composites with kaolin",
      "volume": "A19",
      "author": "Gaehde",
      "year": "1977",
      "journal-title": "Vysokomol Sojed (in Russian)"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB172",
      "unstructured": "Galeski A, Kalinski R, Kryszewski M. Method of modification of filler particles for filling polymers. Polish Patent 120692 1979; assigned to Centre of Molecular and Macromolecular Studies, Polish Academy of Sciences, Lodz."
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB173",
      "first-page": "33",
      "article-title": "Activation treatment of plastics filled with inorganic materials",
      "volume": "13",
      "author": "Motoyoshi",
      "year": "1975",
      "journal-title": "Jpn Plast Age"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB174",
      "first-page": "649",
      "article-title": "Polymerization of vinyl monomers on mineral surfaces: a novel method of preparing reinforcing fillers",
      "volume": "A8",
      "author": "Solomon",
      "year": "1974",
      "journal-title": "J Macromol Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB175",
      "unstructured": "Honda S, Hata H, Simura Y, Une S. Method for preparing a porous structure by stretching a resin sheet useful as an electrode separator. US patent 4,024,213 1977; assigned to Sekisui Kagaku Kogyp Kabushiki Kaisha, Osaka, Japan."
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB176",
      "unstructured": "Magder J, Reich MH. Method of manufacturing microporous paper-like butene-1 polymer sheets. US patent 4,176,148 1979; assigned to Princeton Chem Res, Princeton, NJ."
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB177",
      "unstructured": "Kowalewski T. Drawing and orientation of filled crystalline polymers, PhD thesis. Centre of Molecular and Macromolecular Studies, Polish Academy of Sciences, Lodz, Poland 1988."
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB178",
      "series-title": "Controlled interfaces in composite materials",
      "first-page": "623",
      "article-title": "Toughening of crystalline polyolefins containing particulate fillers by interface modification",
      "author": "Galeski",
      "year": "2002"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB179",
      "doi-asserted-by": "crossref",
      "first-page": "549",
      "DOI": "10.1002/app.1988.070350220",
      "article-title": "Phase structure and adhesion in polymer blends: a criterion for rubber toughening",
      "volume": "35",
      "author": "Wu",
      "year": "1988",
      "journal-title": "J Appl Polym Sci"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB180",
      "doi-asserted-by": "crossref",
      "first-page": "2331",
      "DOI": "10.1016/S0032-3861(98)00445-5",
      "article-title": "Toughness mechanism in semi-crystalline polymer blends: I. High density polyethylene toughened with rubbers",
      "volume": "40",
      "author": "Bartczak",
      "year": "1999",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB181",
      "doi-asserted-by": "crossref",
      "first-page": "2347",
      "DOI": "10.1016/S0032-3861(98)00444-3",
      "article-title": "Toughness mechanism in semi-crystalline polymer blends: II. High density polyethylene toughened with calcium carbonate filler particles",
      "volume": "40",
      "author": "Bartczak",
      "year": "1999",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB182",
      "doi-asserted-by": "crossref",
      "first-page": "921",
      "DOI": "10.1016/0032-3861(95)93590-I",
      "article-title": "Toughening mechanism of rubber-modified polyamides",
      "volume": "36",
      "author": "Muratoglu",
      "year": "1995",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB183",
      "doi-asserted-by": "crossref",
      "first-page": "2143",
      "DOI": "10.1016/0032-3861(95)95289-D",
      "article-title": "Crystalline morphology of polyamide-6 near planar surfaces",
      "volume": "36",
      "author": "Muratoglu",
      "year": "1995",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB184",
      "doi-asserted-by": "crossref",
      "first-page": "4771",
      "DOI": "10.1016/00323-8619(59)92934-",
      "article-title": "Microstructural processes of fracture of rubber-modified polyamides",
      "volume": "36",
      "author": "Muratoglu",
      "year": "1995",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB185",
      "doi-asserted-by": "crossref",
      "first-page": "4787",
      "DOI": "10.1016/00323-8619(59)92945-",
      "article-title": "Microstructural fracture processes accompanying growing cracks in tough rubber-modified polyamides",
      "volume": "36",
      "author": "Muratoglu",
      "year": "1995",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB186",
      "unstructured": "Bartczak Z, Galeski A. Toughness filled poly(methylene oxide) with submicron chalk particles. Unpublished results."
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB187",
      "unstructured": "Psarski M, Galeski A, Hiltner A. Toughening mechanism in polymers of high and low crystal anisotropy filled with submicron chalk particles. Manuscript in preparation."
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB188",
      "unstructured": "Morawiec J, Galeski A. Polypropylene composition containing talc for injection moulded car bumpers. Technical Report #1, Centre of Molecular and Macromolecular Studies, Polish Academy Sciences, Lodz, Poland 1998."
    },
    {
      "key": "10.1016/j.progpolymsci.2003.09.003_BIB189",
      "doi-asserted-by": "crossref",
      "first-page": "6013",
      "DOI": "10.1016/S0032-3861(03)00546-9",
      "article-title": "Toughenability of polymers",
      "volume": "44",
      "author": "Argon",
      "year": "2003",
      "journal-title": "Polymer"
    }
  ],
  "container-title": "Progress in Polymer Science",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://api.elsevier.com/content/article/PII:S0079670003000935?httpAccept=text/xml",
      "content-type": "text/xml",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "https://api.elsevier.com/content/article/PII:S0079670003000935?httpAccept=text/plain",
      "content-type": "text/plain",
      "content-version": "vor",
      "intended-application": "text-mining"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2019,
        2,
        19
      ]
    ],
    "date-time": "2019-02-19T15:59:54Z",
    "timestamp": 1550591994000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "https://linkinghub.elsevier.com/retrieve/pii/S0079670003000935"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        2003,
        12
      ]
    ]
  },
  "references-count": 189,
  "journal-issue": {
    "issue": "12",
    "published-print": {
      "date-parts": [
        [
          2003,
          12
        ]
      ]
    }
  },
  "alternative-id": [
    "S0079670003000935"
  ],
  "URL": "http://dx.doi.org/10.1016/j.progpolymsci.2003.09.003",
  "relation": {},
  "ISSN": [
    "0079-6700"
  ],
  "subject": [],
  "container-title-short": "Progress in Polymer Science",
  "published": {
    "date-parts": [
      [
        2003,
        12
      ]
    ]
  }
}