Bibliography
Middelkoop, V., Chen, H., Michielsen, B., Jacobs, M., Syvertsen-Wiig, G., Mertens, M., Buekenhoudt, A., & Snijkers, F. (2014). Development and characterisation of dense lanthanum-based perovskite oxygen-separation capillary membranes for high-temperature applications. Journal of Membrane Science, 468, 250â258.
References
48
Referenced
18
{'key': '10.1016/j.memsci.2014.05.032_bib1', 'first-page': '22', 'article-title': 'High temperature ion conducting ceramics', 'volume': '10', 'author': 'Ramanarayanan', 'year': '2001', 'journal-title': 'Interface'}
/ Interface / High temperature ion conducting ceramics by Ramanarayanan (2001)10.1016/S0167-2738(99)00332-X
/ Solid State Ionics / Influence of gas flow rate on oxygen flux measurements for dense oxygen conducting ceramic membranes by Stephens (2000){'key': '10.1016/j.memsci.2014.05.032_bib3', 'series-title': 'NATO Science Series II: Mathematics, Physics and Chemistry', 'article-title': 'Mixed Ionic Electronic Conducting Perovskites For Advanced Energy Systems', 'author': 'Orlovskaya', 'year': '2004'}
/ NATO Science Series II: Mathematics, Physics and Chemistry / Mixed Ionic Electronic Conducting Perovskites For Advanced Energy Systems by Orlovskaya (2004)10.1016/j.ssi.2007.02.031
/ Solid State Ionics / Oxygen separation from compressed air using a mixed conducting perovskite-type oxide membrane by Ito (2007)10.1016/j.memsci.2008.05.038
/ J. Membr. Sci. / Oxygen production at low temperature using dense perovskite hollow fiber membranes by Wang (2008)10.1016/j.cej.2009.01.008
/ Chem. Eng. J. / Oxidative coupling of methane (OCM) in a catalytic membrane reactor and comparison of its performance with other catalytic reactors by Bhatia (2009)10.1039/b405676k
/ J. Mater. Chem. / The use of dense mixed ionic and electronic conducting membranes for chemical production by Thursfield (2004)10.1039/c1cc13001c
/ Chem. Commun. / Dense ceramic catalytic membranes and membrane reactors for energy and environmental applications by Dong (2011)10.1016/j.coche.2012.03.003
/ Curr. Opin. Chem. Eng. / Mixed conducting ceramic membranes for high efficiency power generation with CO2 capture by Dong (2012)10.1016/j.cej.2013.01.048
/ Chem. Eng. J. / Dense ceramic oxygen permeable membranes and catalytic membrane reactors by Wei (2013)10.1016/j.ceramint.2012.06.044
/ Ceram. Int. / New morphological Ba0.5Sr0.5Co0.8Fe0.2O3−δ a hollow fibre membranes with high oxygen permeation fluxes by Han (2013)10.1016/j.memsci.2009.05.022
/ J. Membr. Sci. / The enhancement of oxygen flux on Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) hollow fibers using silver surface modification by Leo (2009)10.1016/j.ceramint.2009.02.015
/ Ceram. Int. / Further performance improvement of Ba0.5Sr0.5Co0.8Fe0.2O3−δ perovskite membranes for air separation by Chen (2009)10.1016/j.cattod.2012.03.005
/ Catal. Today / Fabrication of perovskite capillary membranes for high temperature gas separation by Van Noyen (2012)10.1016/j.ssi.2006.05.039
/ Solid State Ionics / Mixed oxygen ion and electron hollow fiber membranes for oxygen separation by Wang (2006)10.1016/S0021-9614(03)00094-6
/ J. Chem. Thermodyn. / Materials in thermodynamic potential gradients by Martin (2003)10.1007/s10008-006-0130-2
/ J. Solid State Electrochem. / Properties and performance of BaxSr1−xCo0.8Fe0.2O3−δ materials for oxygen transport membranes by Vente (2006)10.1016/j.memsci.2005.09.046
/ J. Membr. Sci. / Performance of functional perovskite membranes for oxygen production by Vente (2006)10.1016/j.ssi.2007.11.031
/ Solid State Ionics / Structural instability of cubic perovskite BaxSr1−xCo1−yFeyO3−δ by Svarcova (2008)10.1016/j.memsci.2009.07.040
/ J. Membr. Sci. / Stabilities of La0.6Sr0.4Co0.2Fe0.8O3−δ oxygen separation membranes – effects of kinetic demixing/decomposition and impurity segregation by Wang (2009)10.1016/j.memsci.2010.01.022
/ J. Membr. Sci. / Long-term operation of a La0.58Sr0.4Co0.2Fe0.8O3−δ-membrane for oxygen separation by Schlehuber (2010)10.1016/j.memsci.2010.12.040
/ J. Membr. Sci. / A further investigation of the kinetic demixing/decomposition of La0.6Sr0.4Co0.2Fe0.8O3−δ oxygen separation membranes by Wang (2011)10.1016/j.ssi.2006.03.001
/ Solid State Ionics / Kinetic demixing and decomposition of oxygen permeable membranes by Lein (2006)10.1021/ef300542e
/ Energy Fuels / Optimizing Oxygen transport through La0.6Sr0.4Co0.2Fe0.8O3−delta hollow fiber by microstructure modification and Ag/Pt catalyst deposition by Han (2012)10.1016/j.seppur.2012.05.012
/ Sep. Purif. Technol. / La0.7Sr0.3FeO3−δ perovskite hollow fiber membranes for oxygen permeation and methane conversion by Tan (2012)10.1039/c2ee03470k
/ Energy Environ. Sci. / Chemical looping and oxygen permeable ceramic membranes for hydrogen production – a review by Thursfield (2012)10.1016/j.ijhydene.2009.06.076
/ Int. J. Hydrogen Energy / La1LxSrxMO3 (M=Mn, Fe) perovskites as materials for thermochemical hydrogen production in conventional and membrane reactors by Nalbandian (2009)10.1007/s10008-008-0572-9
/ J. Solid State Electrochem. / Evaluation of La0.5Sr0.5FeO3−δ membrane reactors for partial oxidation of methane by Kozhevnikov (2009)10.1016/j.ssi.2012.02.061
/ Solid State Ionics / Effect of B-site substitution on the stability of La0.2Sr0.8Fe0.8B0.2O3−δ, B=Al, Ga, Cr, Ti, Ta, Nb by Fossmark Lohnea (2012)10.1149/1.2709510
/ J. Electrochem. Soc. / The stability of LSF-YSZ electrodes prepared by infiltration by Wang (2007)10.1007/s10832-008-9428-z
/ J. Electroceram. / Properties of B-site substituted La0.5Sr0.5FeO3−δ perovskites for application in oxygen separation membranes by Bayraktar (2009)10.1016/S0167-2738(00)00425-2
/ Solid State Ionics / Preparation of LaSrCoFeO3−x membranes by Luyten (2000)- J. Luyten, A. Buekenhoudt, J. Cooymans, R. Leysen, Gas-Separating Dense Ceramic Membrane, Patent, EP 0900587, 1999.
10.1016/j.memsci.2011.02.011
/ J. Membr. Sci. / Development, performance and stability of sulfur-free, macrovoid-free BSCF capillaries for high temperature oxygen separation from air by Buysse (2011)10.1016/j.memsci.2012.03.030
/ J. Membr. Sci. / Towards a generic method for inorganic porous hollow fibers preparation with shrinkage-controlled small radial dimensions, applied to Al2O3, Ni, SiC, stainless steel, and YSZ by Luiten-Olieman (2012)10.1002/aic.10475
/ AIChE J. / Mixed Conducting ceramic hollow-fiber membranes for air separation by Tan (2005)- B. Michielsen, M. Jacobs, V. Middelkoop, F. Snijkers, Surface Modification of La0.6Sr0.4Co0.2Fe0.8O3−δ Hollow Fiber Membranes for Oxygen Separation ECERCS, Limonges, 2013.
- 〈http://www.instron.co.uk/wa/glossary/Flexural-Strength.aspx〉, Glossary of Materials Testing, Flexural Strength, Instron, Bucks HP12 3SY, United Kingdom.
10.1016/j.polymertesting.2005.10.006
/ Polym. Test. / On the difference between flexural moduli obtained by three-point and four-point bending tests by Mujika (2006)10.1016/j.memsci.2009.10.030
/ J. Membr. Sci. / Fabrication and oxygen permeability of gastight, macrovoid-free Ba0.5Sr0.5Co0.8Fe0.2O3−δ capillaries for high temperature gas separation by Buysse (2010)10.1021/ie040179c
/ Ind. Eng. Chem. Res. / Preparation of LSCF ceramic hollow-fiber membranes for oxygen production by a phase-inversion/sintering technique by Tan (2005)10.1021/ie901403u
/ Ind. Eng. Chem. Res. / Effects of sintering on the properties of La0.6Sr0.4Co0.2Fe0.8O3−δ perovskite hollow fiber membranes by Tan (2010)- H. Bingxin, Thermo-Mechanical Properties of Mixed Ion-Electron Conducting Membrane Materials (PhD thesis), Fakultät für Maschinenwesen der Rheinisch-Westfälischen Technischen Hochschule Aachen, 2010, p. 25.
10.1007/s10008-006-0139-6
/ J. Solid State Electrochem. / Methane oxidation in a mixed ionic–electronic conducting ceramic hollow fibre reactor module by Thursfield (2006)10.1016/S0167-2738(02)00733-6
/ Solid State Ionics / High temperature properties of La0.6Sr0.4Co0.8Fe0.2O3−δ oxygen nonstoichiometry and chemical diffusion constant by Katsuki (2003)10.1016/j.jpowsour.2011.09.099
/ J. Power Sources / Lattice expansion of LSCF-6428 cathodes measured by in situ XRD during SOFC operation by Hardy (2012)10.1016/j.memsci.2006.11.015
/ J. Membr. Sci. / Air separation using a catalytically modified mixed conducting ceramic hollow fibre membrane module by Thursfield (2007)10.1016/j.memsci.2013.04.020
/ J. Membr. Sci. / Effects of fabrication processes on oxygen permeation of Nb2O5-doped SrCo0.8Fe0.2O3−δ micro-tubular membranes by Wu (2013)
Dates
Type | When |
---|---|
Created | 11 years, 2 months ago (June 2, 2014, 5:23 a.m.) |
Deposited | 5 years, 3 months ago (May 11, 2020, 8:05 p.m.) |
Indexed | 1 year, 1 month ago (July 5, 2024, 6:38 p.m.) |
Issued | 10 years, 11 months ago (Oct. 1, 2014) |
Published | 10 years, 11 months ago (Oct. 1, 2014) |
Published Print | 10 years, 11 months ago (Oct. 1, 2014) |
Funders
1
European Union Seventh Framework Programme
10.13039/100011102
Seventh Framework ProgrammeRegion: Europe
gov (National government)
Labels
13
- EC Seventh Framework Programm
- European Commission Seventh Framework Programme
- EU Seventh Framework Programme
- European Union Seventh Framework Programme
- EU 7th Framework Programme
- European Union 7th Framework Programme
- Siebten Rahmenprogramm
- Séptimo Programa Marco
- Septième programme-cadre
- Settimo programma quadro
- 7th Framework Programme
- Seventh EU Framework Programme
- FP7
Awards
1
- NMP3-LA-2011-262840
@article{Middelkoop_2014, title={Development and characterisation of dense lanthanum-based perovskite oxygen-separation capillary membranes for high-temperature applications}, volume={468}, ISSN={0376-7388}, url={http://dx.doi.org/10.1016/j.memsci.2014.05.032}, DOI={10.1016/j.memsci.2014.05.032}, journal={Journal of Membrane Science}, publisher={Elsevier BV}, author={Middelkoop, Vesna and Chen, Hong and Michielsen, Bart and Jacobs, Marijke and Syvertsen-Wiig, Guttorm and Mertens, Myrjam and Buekenhoudt, Anita and Snijkers, Frans}, year={2014}, month=oct, pages={250–258} }