DOI: 10.1016/j.ijplas.2011.10.004. Macroscopic plasticity modeling of anisotropic aluminum extrusions using a Reduced Texture Methodology

Macroscopic plasticity modeling of anisotropic aluminum extrusions using a Reduced Texture Methodology

10.1016/j.ijplas.2011.10.004

Crossref journal-article

Elsevier BV

International Journal of Plasticity (78)

Bibliography

Rousselier, G., Luo, M., & Mohr, D. (2012). Macroscopic plasticity modeling of anisotropic aluminum extrusions using a Reduced Texture Methodology. International Journal of Plasticity, 30â31, 144â165.

Authors 3

Gilles Rousselier (first)
Meng Luo (additional)
Dirk Mohr (additional)

References 74 Referenced 20

10.1016/j.cma.2003.12.068 / Comput. Methods. Appl. M / Single-crystal elasto-viscoplasticity: application to texture evolution in polycrystalline metals at large strains by Anand (2004)
10.1016/0167-6636(94)90062-0 / Mech. Mater. / The process of shear band formation in plane strain compression of fcc metals: efects of crystallographic texture by Anand (1994)
10.1016/j.ijplas.2007.10.002 / Int. J. Plasticity / A simple isotropic-distortional hardening model and its application in elastic-plastic analysis of localized necking in orthotropic sheet metal by Aretz (2008)
Armstrong, P.J., Frederick, C.O., 1966. A mathematical representation of the multiaxial Bauschinger effect. Report RD/B/N731, Central Electricity Generating Board, Berkeley, UK.
10.1016/S1359-6454(01)00326-3 / Acta Mater. / Plasticity of initially textured hexagonal polycrystals at high homologous temperatures: application to titanium by Balasubramanian (2002)
10.1016/j.ijplas.2004.06.004 / Int. J. Plasticity / Linear transformation-based anisotropic yield functions by Barlat (2005)
10.1016/0956-716X(92)90585-3 / Scripta Metall. Mater. / On crystallographic texture gradient and its mechanical consequence in rolled aluminum–ithium sheet by Barlat (1992)
10.1016/S0749-6419(02)00020-7 / Int. J. Plasticity / Plastic flow for non-monotonic loading conditions of an aluminum alloy sheet sample by Barlat (2003)
10.1016/S0749-6419(02)00019-0 / Int. J. Plasticity / Plane stress yield function for aluminum alloy sheets – Part I: Theory by Barlat (2003)
10.1016/0749-6419(91)90052-Z / Int. J. Plasticity / A six-component yield function for anisotropic materials by Barlat (1991)
10.1016/j.ijplas.2006.10.001 / Int. J. Plasticity / On linear transformations of stress tensors for the description of plastic anisotropy by Barlat (2007)
10.1016/j.actamat.2010.12.040 / Acta Mater. / Effect of stress triaxiality and Lode angle on the kinetics of strain-induced austenite-to-martensite transformation by Beese (2011)
10.1016/0022-5096(78)90003-0 / J. Mech. Phys. Solids / An extension of the self-consistent scheme to plastically-flowing polycrystals by Berveiller (1979)
10.1080/14786445108561065 / Philos. Mag. / A theory of the plastic distortion of a polycrystalline aggregate under combined stresses by Bishop (1951)
10.1016/j.commatsci.2004.09.040 / Comput. Mater. Sci. / A texture component model for anisotropic polycrystal plasticity by Böhlke (2005)
10.1088/0965-0393/14/3/003 / Model. Simul. Mater. Sci. Eng. / Finite element simulation of metal forming operations with texture based material models by Böhlke (2006)
10.1016/j.ijplas.2003.06.001 / Int. J. Plasticity / A yield function for anisotropic materials – application to aluminum alloys by Bron (2004)
10.1098/rsta.1992.0111 / Philos. Trans.: Phys. Sci. Eng. / Polycrystalline plasticity and the evolution of crystallographic texture in FCC metals by Bronkhorst (1992)
Cailletaud, G., 1987. Une approche micromécanique phénoménologique du comportement inélastique des métaux. PhD Thesis, Paris University (Paris 6).
10.1016/0749-6419(92)90038-E / Int. J. Plasticity / A micromechanical approach to inelastic behavior of metals by Cailletaud (1992)
10.1016/j.ijplas.2005.06.001 / Int. J. Plasticity / Orthotropic yield criterion for hexagonal close packed metals by Cazacu (2006)
{'issue': '1', 'key': '10.1016/j.ijplas.2011.10.004_b0110', 'first-page': '33', 'article-title': 'Viscoplastic constitutive equations for the description of cyclic and anisotropic behavior of metals', 'author': 'Chaboche', 'year': '1977', 'journal-title': 'Bull. Acad. Polon. Sci., Série Sci. Tech. XXV'} / Bull. Acad. Polon. Sci., Série Sci. Tech. XXV / Viscoplastic constitutive equations for the description of cyclic and anisotropic behavior of metals by Chaboche (1977)
10.1115/1.3264257 / J. Pressure Vessel Technol. / On the plastic and viscoplastic constitutive equations – Parts I and II by Chaboche (1983)
10.1016/j.ijplas.2006.02.002 / Int. J. Plasticity / Modeling multi-axial deformation of planar anisotropic elasto-plastic materials. Part I: Theory by Choi (2006)
Dunand, M., Maertens, A., Luo, M., Mohr, D., submitted for publication. Experiments and modeling of anisotropic aluminum extrusions under multi-axial loading – Part I: Plasticity.
10.1098/rspa.1957.0133 / Proc. Roy. Soc. Lond. A / The determination of the elastic field of an ellipsoidal inclusion and related problems by Eshelby (1957)
10.1016/0001-6160(80)90162-5 / Acta Metall. / Latent hardening in copper and aluminum single crystals by Franciosi (1980)
10.1016/j.ijplas.2007.11.005 / Int. J. Plasticity / Evaluation of identification methods for YLD2004-18p by Grytten (2008)
10.1016/j.ijplas.2006.03.010 / Int. J. Plasticity / Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: modelling, numerical analysis and identification by Haddadi (2006)
10.1098/rspa.1948.0045 / Proc. Roy. Soc. Lond. A / A theory of the yielding and plastic flow of anisotropic metals by Hill (1948)
10.1016/S0749-6419(00)00019-X / Int. J. Plasticity / Polycrystal modeling of IF-Ti steel under complex loading path by Hoc (2001)
10.1016/j.ijplas.2007.09.007 / Int. J. Plasticity / A crystal plasticity model for strain-path changes in metals by Holmedal (2008)
10.1016/0022-5096(92)80003-9 / J. Mech. Phys. Solids / Crystallographic texture evolution in bulk deformation processing of FCC metals by Kalidindi (1992)
10.1016/0022-5096(93)90073-O / J. Mech. Phys. Solids / A general anisotropic yield criterion using bounds and a transformation weighting tensor by Karafillis (1993)
10.1016/j.ijplas.2008.07.003 / Int. J. Plasticity / Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation – Part I: A very low work hardening aluminum alloy (Al6061-T6511) by Khan (2009)
10.1016/j.ijplas.2009.07.008 / Int. J. Plasticity / Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation – Part II: A very high work hardening aluminum alloy (annealed 1100 Al) by Khan (2010)
10.1016/j.ijplas.2009.07.007 / Int. J. Plasticity / Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation – Part III: Yield surface in tension-tension stress space (Al6061-T6511 and annealed 1100 Al) by Khan (2010)
10.1016/j.ijplas.2008.02.011 / Int. J. Plasticity / Inflation and burst of aluminum tubes – Part II: An advanced yield function including deformation-induced anisotropy by Korkolis (2008)
10.1016/S0022-5096(97)00037-9 / J. Mech. Phys. Solids / Elasto-viscoplastic constitutive equations for polycrystalline metals: Application to tantalum by Kothari (1998)
10.1016/0001-6160(61)90060-8 / Acta Metall. / Zur plastischen Verformung des Vielkristalls by Kröner (1971)
10.1016/S1359-6454(99)00213-X / Acta Mater. / Use of abrupt strain path change for determining subsequent yield surface: illustrations of basic idea by Kuroda (1999)
10.1016/S0022-5096(00)00080-6 / J. Mech. Phys. Solids / A phenomenological plasticity model with non-normality effects representing observations in crystal plasticity by Kuroda (2001)
10.1016/j.ijplas.2006.06.003 / Int. J. Plasticity / Advances in experiments on metal sheets and tubes in support of constitutive modeling and forming simulations by Kuwabara (2007)
Ladévèze, P., 1980. Sur la théorie de la plasticité en grandes déformations. Technical report, ENS Cachan, Novembre 1980.
10.1090/qam/10666 / Quart. Appl. Math. / A method for the solution of certain non-linear problems in least squares by Levenberg (1944)
10.1016/S0749-6419(01)00016-X / Int. J. Plasticity / Effect of texture and microstructure on strain hardening anisotropy for aluminum deformed in uniaxial tension and simple shear by Lopes (2003)
10.1016/j.jmps.2008.07.003 / J. Mech. Phys. Solids / Large deformation of anisotropic austenitic stainless steel sheets at room temperature: multi-axial experiments and phenomenological modeling by Mohr (2008)
10.1007/s11340-007-9053-9 / Exp. Mech. / A new experimental technique for the multi-axial testing of advanced high strength steel sheets by Mohr (2008)
10.1016/j.msea.2009.12.013 / Mater. Sci. Eng. / Experimental characterization and modeling of the hardening behavior of the sheet steel LH800 by Noman (2010)
10.1016/S1359-6454(01)00066-0 / Acta Mater. / Work-hardening softening behavior of B.C.C. polycrystals during changing strain paths – I. An integrated model based on substructure and texture evolution, and its prediction of the stress–strain behavior of an IF steel during two-stage strain paths by Peeters (2001)
Pietryga, M.P., Vladimirov, I.N., Reese, S., submitted for publication. A finite deformation model for evolving flow anisotropy with distortional hardening including experimental validation
10.1016/j.ijplas.2007.07.013 / Int. J. Plasticity / Orthotropic yield criteria for description of the anisotropy in tension and compression of sheet metals by Plunkett (2008)
10.1016/S0749-6419(99)00056-X / Int. J. Plasticity / Ratchetting under tension-torsion loadings: experiments and modeling by Portier (2000)
10.1016/S0749-6419(03)00092-5 / Int. J. Plasticity / Using texture components in crystal plasticity finite element simulations by Raabe (2004)
10.1016/j.ijplas.2009.04.002 / Int. J. Plasticity / A novel approach for anisotropic hardening modeling – Part I: Theory and its application to finite element analysis of deep drawing by Rousselier (2009)
10.1016/j.ijplas.2010.01.001 / Int. J. Plasticity / A novel approach for anisotropic hardening modeling – Part II: Anisotropic hardening in proportional and non-proportional loadings, application to initially isotropic material by Rousselier (2010)
10.1016/j.mechmat.2005.06.007 / Mech. Mater. / Micro-mechanical modeling of the inelastic behavior of directionally solidified materials by Sai (2006)
10.1016/j.ijplas.2007.07.016 / Int. J. Plasticity / On the use of homogeneous polynomials to develop anisotropic yield functions with applications to sheet forming by Soare (2008)
10.1016/j.ijplas.2009.02.003 / Int. J. Plasticity / Anisotropic hardening and non-associated flow in proportional loading of sheet metals by Stoughton (2009)
10.1016/j.ijplas.2009.07.003 / Int. J. Plasticity / A non-associated constitutive model with mixed iso-kinematic hardening for finite element simulation of sheet metal forming by Taherizadeh (2010)
Teodosiu, C., 1992. In: Andersen, S.I. et al. (Eds), Proceedings of the 13rd Risø International Symposium on Materials Science, Risø National Laboratory, Roskilde, Denmark, pp. 125–146.
Teodosiu, C., Hu, Z., 1995. Evolution of the intragranular microstructure at moderate and large strains: modelling and computational significance. In: Shen, S.F., Dawson, P.R. (Eds.), Simulation of Materials Processing: Theory, Methods and Applications. Balkema, Rotterdam, pp. 173–182.
10.1016/j.ijplas.2003.11.005 / Int. J. Plasticity / Convex plastic potentials of fourth and sixth rank for anisotropic materials by Van Houtte (2004)
10.1016/j.ijplas.2003.10.008 / Int. J. Plasticity / A general cyclic plasticity model taking into account yield surface distortion for multiaxial ratcheting by Vincent (2002)
{'key': '10.1016/j.ijplas.2011.10.004_b0335', 'first-page': '582', 'article-title': 'Mechanik der Festen Körper im plastisch deformable Zustand', 'volume': '1', 'author': 'Von Mises', 'year': '1913', 'journal-title': 'Göttin. Nachr. Math. Phys.'} / Göttin. Nachr. Math. Phys. / Mechanik der Festen Körper im plastisch deformable Zustand by Von Mises (1913)
10.1016/j.ijplas.2007.08.009 / Int. J. Plasticity / On the modeling of hardening in metals during non-proportional loading by Wang (2008)
10.1016/j.ijplas.2004.05.007 / Int. J. Plasticity / On pre-straining and the evolution of material anisotropy in sheet metals by Wu (2005)
10.1016/S0749-6419(03)00099-8 / Int. J. Plasticity / Plane stress yield function for aluminum alloy sheets – Part II: FE formulation and its implementation by Yoon (2004)
10.1016/j.ijplas.2005.03.013 / Int. J. Plasticity / Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function by Yoon (2006)
10.1016/j.jmatprotec.2006.03.189 / J. Mater. Proc. Technol. / Modeling of aluminum alloy sheets based on new anisotropic yield function by Yoon (2006)
10.1016/S0045-7825(98)00275-8 / Comput. Methods Appl. Mech. Eng. / Elasto-plastic finite element method based on incremental deformation theory and continuum based shell elements for planar anisotropic sheet materials by Yoon (1999)
10.1016/S0749-6419(98)00059-X / Int. J. Plasticity / A general elasto-plastic finite element formulation based on incremental deformation theory for planar anisotropy and its application to sheet metal forming by Yoon (1999)
10.1002/1527-2648(200112)3:12<984::AID-ADEM984>3.0.CO;2-L / Adv. Eng. Mater. / Introduction of a texture component crystal plasticity finite element method for anisotropic simulations by Zhao (2001)
Z-set manual, 2007. ONERA: zebulon.onera.fr, Transvalor/MINES ParisTech and Northwest Numerics, Inc.

Dates

Type	When
Created	13 years, 10 months ago (Oct. 15, 2011, 10:21 a.m.)
Deposited	6 years, 9 months ago (Nov. 29, 2018, 9:29 a.m.)
Indexed	1 month, 2 weeks ago (July 20, 2025, 12:21 a.m.)
Issued	13 years, 6 months ago (March 1, 2012)
Published	13 years, 6 months ago (March 1, 2012)
Published Print	13 years, 6 months ago (March 1, 2012)

Funders 0

None

BibTeX

@article{Rousselier_2012, title={Macroscopic plasticity modeling of anisotropic aluminum extrusions using a Reduced Texture Methodology}, volume={30–31}, ISSN={0749-6419}, url={http://dx.doi.org/10.1016/j.ijplas.2011.10.004}, DOI={10.1016/j.ijplas.2011.10.004}, journal={International Journal of Plasticity}, publisher={Elsevier BV}, author={Rousselier, Gilles and Luo, Meng and Mohr, Dirk}, year={2012}, month=mar, pages={144–165} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2025,
        7,
        20
      ]
    ],
    "date-time": "2025-07-20T04:21:44Z",
    "timestamp": 1752985304475
  },
  "reference-count": 74,
  "publisher": "Elsevier BV",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            2012,
            3,
            1
          ]
        ],
        "date-time": "2012-03-01T00:00:00Z",
        "timestamp": 1330560000000
      },
      "content-version": "tdm",
      "delay-in-days": 0,
      "URL": "https://www.elsevier.com/tdm/userlicense/1.0/"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        2012,
        3
      ]
    ]
  },
  "DOI": "10.1016/j.ijplas.2011.10.004",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2011,
        10,
        15
      ]
    ],
    "date-time": "2011-10-15T14:21:48Z",
    "timestamp": 1318688508000
  },
  "page": "144-165",
  "source": "Crossref",
  "is-referenced-by-count": 20,
  "special_numbering": "C",
  "title": "Macroscopic plasticity modeling of anisotropic aluminum extrusions using a Reduced Texture Methodology",
  "prefix": "10.1016",
  "volume": "30-31",
  "author": [
    {
      "given": "Gilles",
      "family": "Rousselier",
      "sequence": "first",
      "affiliation": []
    },
    {
      "given": "Meng",
      "family": "Luo",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "Dirk",
      "family": "Mohr",
      "sequence": "additional",
      "affiliation": []
    }
  ],
  "member": "78",
  "reference": [
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0005",
      "doi-asserted-by": "crossref",
      "first-page": "5359",
      "DOI": "10.1016/j.cma.2003.12.068",
      "article-title": "Single-crystal elasto-viscoplasticity: application to texture evolution in polycrystalline metals at large strains",
      "volume": "193",
      "author": "Anand",
      "year": "2004",
      "journal-title": "Comput. Methods. Appl. M"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0010",
      "doi-asserted-by": "crossref",
      "first-page": "223",
      "DOI": "10.1016/0167-6636(94)90062-0",
      "article-title": "The process of shear band formation in plane strain compression of fcc metals: efects of crystallographic texture",
      "volume": "17",
      "author": "Anand",
      "year": "1994",
      "journal-title": "Mech. Mater."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0015",
      "doi-asserted-by": "crossref",
      "first-page": "1457",
      "DOI": "10.1016/j.ijplas.2007.10.002",
      "article-title": "A simple isotropic-distortional hardening model and its application in elastic-plastic analysis of localized necking in orthotropic sheet metal",
      "volume": "24",
      "author": "Aretz",
      "year": "2008",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0020",
      "unstructured": "Armstrong, P.J., Frederick, C.O., 1966. A mathematical representation of the multiaxial Bauschinger effect. Report RD/B/N731, Central Electricity Generating Board, Berkeley, UK."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0025",
      "doi-asserted-by": "crossref",
      "first-page": "133",
      "DOI": "10.1016/S1359-6454(01)00326-3",
      "article-title": "Plasticity of initially textured hexagonal polycrystals at high homologous temperatures: application to titanium",
      "volume": "50",
      "author": "Balasubramanian",
      "year": "2002",
      "journal-title": "Acta Mater."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0030",
      "doi-asserted-by": "crossref",
      "first-page": "1009",
      "DOI": "10.1016/j.ijplas.2004.06.004",
      "article-title": "Linear transformation-based anisotropic yield functions",
      "volume": "21",
      "author": "Barlat",
      "year": "2005",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0035",
      "doi-asserted-by": "crossref",
      "first-page": "1121",
      "DOI": "10.1016/0956-716X(92)90585-3",
      "article-title": "On crystallographic texture gradient and its mechanical consequence in rolled aluminum\u2013ithium sheet",
      "volume": "27",
      "author": "Barlat",
      "year": "1992",
      "journal-title": "Scripta Metall. Mater."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0040",
      "doi-asserted-by": "crossref",
      "first-page": "1215",
      "DOI": "10.1016/S0749-6419(02)00020-7",
      "article-title": "Plastic flow for non-monotonic loading conditions of an aluminum alloy sheet sample",
      "volume": "19",
      "author": "Barlat",
      "year": "2003",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0045",
      "doi-asserted-by": "crossref",
      "first-page": "1297",
      "DOI": "10.1016/S0749-6419(02)00019-0",
      "article-title": "Plane stress yield function for aluminum alloy sheets \u2013 Part I: Theory",
      "volume": "19",
      "author": "Barlat",
      "year": "2003",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0050",
      "doi-asserted-by": "crossref",
      "first-page": "693",
      "DOI": "10.1016/0749-6419(91)90052-Z",
      "article-title": "A six-component yield function for anisotropic materials",
      "volume": "7",
      "author": "Barlat",
      "year": "1991",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0055",
      "doi-asserted-by": "crossref",
      "first-page": "876",
      "DOI": "10.1016/j.ijplas.2006.10.001",
      "article-title": "On linear transformations of stress tensors for the description of plastic anisotropy",
      "volume": "23",
      "author": "Barlat",
      "year": "2007",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0060",
      "doi-asserted-by": "crossref",
      "first-page": "589",
      "DOI": "10.1016/j.actamat.2010.12.040",
      "article-title": "Effect of stress triaxiality and Lode angle on the kinetics of strain-induced austenite-to-martensite transformation",
      "volume": "59",
      "author": "Beese",
      "year": "2011",
      "journal-title": "Acta Mater."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0065",
      "doi-asserted-by": "crossref",
      "first-page": "325",
      "DOI": "10.1016/0022-5096(78)90003-0",
      "article-title": "An extension of the self-consistent scheme to plastically-flowing polycrystals",
      "volume": "26",
      "author": "Berveiller",
      "year": "1979",
      "journal-title": "J. Mech. Phys. Solids"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0070",
      "doi-asserted-by": "crossref",
      "first-page": "414",
      "DOI": "10.1080/14786445108561065",
      "article-title": "A theory of the plastic distortion of a polycrystalline aggregate under combined stresses",
      "volume": "42",
      "author": "Bishop",
      "year": "1951",
      "journal-title": "Philos. Mag."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0075",
      "doi-asserted-by": "crossref",
      "first-page": "284",
      "DOI": "10.1016/j.commatsci.2004.09.040",
      "article-title": "A texture component model for anisotropic polycrystal plasticity",
      "volume": "32",
      "author": "B\u00f6hlke",
      "year": "2005",
      "journal-title": "Comput. Mater. Sci."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0080",
      "doi-asserted-by": "crossref",
      "first-page": "365",
      "DOI": "10.1088/0965-0393/14/3/003",
      "article-title": "Finite element simulation of metal forming operations with texture based material models",
      "volume": "14",
      "author": "B\u00f6hlke",
      "year": "2006",
      "journal-title": "Model. Simul. Mater. Sci. Eng."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0085",
      "doi-asserted-by": "crossref",
      "first-page": "937",
      "DOI": "10.1016/j.ijplas.2003.06.001",
      "article-title": "A yield function for anisotropic materials \u2013 application to aluminum alloys",
      "volume": "20",
      "author": "Bron",
      "year": "2004",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0090",
      "doi-asserted-by": "crossref",
      "first-page": "443",
      "DOI": "10.1098/rsta.1992.0111",
      "article-title": "Polycrystalline plasticity and the evolution of crystallographic texture in FCC metals",
      "volume": "341",
      "author": "Bronkhorst",
      "year": "1992",
      "journal-title": "Philos. Trans.: Phys. Sci. Eng."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0095",
      "unstructured": "Cailletaud, G., 1987. Une approche microm\u00e9canique ph\u00e9nom\u00e9nologique du comportement in\u00e9lastique des m\u00e9taux. PhD Thesis, Paris University (Paris 6)."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0100",
      "doi-asserted-by": "crossref",
      "first-page": "55",
      "DOI": "10.1016/0749-6419(92)90038-E",
      "article-title": "A micromechanical approach to inelastic behavior of metals",
      "volume": "8",
      "author": "Cailletaud",
      "year": "1992",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0105",
      "doi-asserted-by": "crossref",
      "first-page": "1171",
      "DOI": "10.1016/j.ijplas.2005.06.001",
      "article-title": "Orthotropic yield criterion for hexagonal close packed metals",
      "volume": "22",
      "author": "Cazacu",
      "year": "2006",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "issue": "1",
      "key": "10.1016/j.ijplas.2011.10.004_b0110",
      "first-page": "33",
      "article-title": "Viscoplastic constitutive equations for the description of cyclic and anisotropic behavior of metals",
      "author": "Chaboche",
      "year": "1977",
      "journal-title": "Bull. Acad. Polon. Sci., S\u00e9rie Sci. Tech. XXV"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0115",
      "doi-asserted-by": "crossref",
      "first-page": "153",
      "DOI": "10.1115/1.3264257",
      "article-title": "On the plastic and viscoplastic constitutive equations \u2013 Parts I and II",
      "volume": "105",
      "author": "Chaboche",
      "year": "1983",
      "journal-title": "J. Pressure Vessel Technol."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0120",
      "doi-asserted-by": "crossref",
      "first-page": "1745",
      "DOI": "10.1016/j.ijplas.2006.02.002",
      "article-title": "Modeling multi-axial deformation of planar anisotropic elasto-plastic materials. Part I: Theory",
      "volume": "22",
      "author": "Choi",
      "year": "2006",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0125",
      "unstructured": "Dunand, M., Maertens, A., Luo, M., Mohr, D., submitted for publication. Experiments and modeling of anisotropic aluminum extrusions under multi-axial loading \u2013 Part I: Plasticity."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0130",
      "doi-asserted-by": "crossref",
      "first-page": "376",
      "DOI": "10.1098/rspa.1957.0133",
      "article-title": "The determination of the elastic field of an ellipsoidal inclusion and related problems",
      "volume": "241",
      "author": "Eshelby",
      "year": "1957",
      "journal-title": "Proc. Roy. Soc. Lond. A"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0135",
      "doi-asserted-by": "crossref",
      "first-page": "273",
      "DOI": "10.1016/0001-6160(80)90162-5",
      "article-title": "Latent hardening in copper and aluminum single crystals",
      "volume": "28",
      "author": "Franciosi",
      "year": "1980",
      "journal-title": "Acta Metall."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0140",
      "doi-asserted-by": "crossref",
      "first-page": "2248",
      "DOI": "10.1016/j.ijplas.2007.11.005",
      "article-title": "Evaluation of identification methods for YLD2004-18p",
      "volume": "24",
      "author": "Grytten",
      "year": "2008",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0145",
      "doi-asserted-by": "crossref",
      "first-page": "2226",
      "DOI": "10.1016/j.ijplas.2006.03.010",
      "article-title": "Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: modelling, numerical analysis and identification",
      "volume": "22",
      "author": "Haddadi",
      "year": "2006",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0150",
      "doi-asserted-by": "crossref",
      "first-page": "281",
      "DOI": "10.1098/rspa.1948.0045",
      "article-title": "A theory of the yielding and plastic flow of anisotropic metals",
      "volume": "193",
      "author": "Hill",
      "year": "1948",
      "journal-title": "Proc. Roy. Soc. Lond. A"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0155",
      "doi-asserted-by": "crossref",
      "first-page": "65",
      "DOI": "10.1016/S0749-6419(00)00019-X",
      "article-title": "Polycrystal modeling of IF-Ti steel under complex loading path",
      "volume": "17",
      "author": "Hoc",
      "year": "2001",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0160",
      "doi-asserted-by": "crossref",
      "first-page": "1360",
      "DOI": "10.1016/j.ijplas.2007.09.007",
      "article-title": "A crystal plasticity model for strain-path changes in metals",
      "volume": "24",
      "author": "Holmedal",
      "year": "2008",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0165",
      "doi-asserted-by": "crossref",
      "first-page": "537",
      "DOI": "10.1016/0022-5096(92)80003-9",
      "article-title": "Crystallographic texture evolution in bulk deformation processing of FCC metals",
      "volume": "40",
      "author": "Kalidindi",
      "year": "1992",
      "journal-title": "J. Mech. Phys. Solids"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0170",
      "doi-asserted-by": "crossref",
      "first-page": "1859",
      "DOI": "10.1016/0022-5096(93)90073-O",
      "article-title": "A general anisotropic yield criterion using bounds and a transformation weighting tensor",
      "volume": "41",
      "author": "Karafillis",
      "year": "1993",
      "journal-title": "J. Mech. Phys. Solids"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0175",
      "doi-asserted-by": "crossref",
      "first-page": "1611",
      "DOI": "10.1016/j.ijplas.2008.07.003",
      "article-title": "Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation \u2013 Part I: A very low work hardening aluminum alloy (Al6061-T6511)",
      "volume": "25",
      "author": "Khan",
      "year": "2009",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0180",
      "doi-asserted-by": "crossref",
      "first-page": "1421",
      "DOI": "10.1016/j.ijplas.2009.07.008",
      "article-title": "Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation \u2013 Part II: A very high work hardening aluminum alloy (annealed 1100 Al)",
      "volume": "26",
      "author": "Khan",
      "year": "2010",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0185",
      "doi-asserted-by": "crossref",
      "first-page": "1432",
      "DOI": "10.1016/j.ijplas.2009.07.007",
      "article-title": "Evolution of subsequent yield surfaces and elastic constants with finite plastic deformation \u2013 Part III: Yield surface in tension-tension stress space (Al6061-T6511 and annealed 1100 Al)",
      "volume": "26",
      "author": "Khan",
      "year": "2010",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0190",
      "doi-asserted-by": "crossref",
      "first-page": "1625",
      "DOI": "10.1016/j.ijplas.2008.02.011",
      "article-title": "Inflation and burst of aluminum tubes \u2013 Part II: An advanced yield function including deformation-induced anisotropy",
      "volume": "24",
      "author": "Korkolis",
      "year": "2008",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0195",
      "doi-asserted-by": "crossref",
      "first-page": "51",
      "DOI": "10.1016/S0022-5096(97)00037-9",
      "article-title": "Elasto-viscoplastic constitutive equations for polycrystalline metals: Application to tantalum",
      "volume": "46",
      "author": "Kothari",
      "year": "1998",
      "journal-title": "J. Mech. Phys. Solids"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0200",
      "doi-asserted-by": "crossref",
      "first-page": "155",
      "DOI": "10.1016/0001-6160(61)90060-8",
      "article-title": "Zur plastischen Verformung des Vielkristalls",
      "volume": "9",
      "author": "Kr\u00f6ner",
      "year": "1971",
      "journal-title": "Acta Metall."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0205",
      "doi-asserted-by": "crossref",
      "first-page": "3879",
      "DOI": "10.1016/S1359-6454(99)00213-X",
      "article-title": "Use of abrupt strain path change for determining subsequent yield surface: illustrations of basic idea",
      "volume": "47",
      "author": "Kuroda",
      "year": "1999",
      "journal-title": "Acta Mater."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0210",
      "doi-asserted-by": "crossref",
      "first-page": "1239",
      "DOI": "10.1016/S0022-5096(00)00080-6",
      "article-title": "A phenomenological plasticity model with non-normality effects representing observations in crystal plasticity",
      "volume": "49",
      "author": "Kuroda",
      "year": "2001",
      "journal-title": "J. Mech. Phys. Solids"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0215",
      "doi-asserted-by": "crossref",
      "first-page": "385",
      "DOI": "10.1016/j.ijplas.2006.06.003",
      "article-title": "Advances in experiments on metal sheets and tubes in support of constitutive modeling and forming simulations",
      "volume": "23",
      "author": "Kuwabara",
      "year": "2007",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0220",
      "unstructured": "Lad\u00e9v\u00e8ze, P., 1980. Sur la th\u00e9orie de la plasticit\u00e9 en grandes d\u00e9formations. Technical report, ENS Cachan, Novembre 1980."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0225",
      "doi-asserted-by": "crossref",
      "first-page": "164",
      "DOI": "10.1090/qam/10666",
      "article-title": "A method for the solution of certain non-linear problems in least squares",
      "volume": "2",
      "author": "Levenberg",
      "year": "1944",
      "journal-title": "Quart. Appl. Math."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0230",
      "doi-asserted-by": "crossref",
      "first-page": "1",
      "DOI": "10.1016/S0749-6419(01)00016-X",
      "article-title": "Effect of texture and microstructure on strain hardening anisotropy for aluminum deformed in uniaxial tension and simple shear",
      "volume": "19",
      "author": "Lopes",
      "year": "2003",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0240",
      "doi-asserted-by": "crossref",
      "first-page": "2935",
      "DOI": "10.1016/j.jmps.2008.07.003",
      "article-title": "Large deformation of anisotropic austenitic stainless steel sheets at room temperature: multi-axial experiments and phenomenological modeling",
      "volume": "56",
      "author": "Mohr",
      "year": "2008",
      "journal-title": "J. Mech. Phys. Solids"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0245",
      "doi-asserted-by": "crossref",
      "first-page": "65",
      "DOI": "10.1007/s11340-007-9053-9",
      "article-title": "A new experimental technique for the multi-axial testing of advanced high strength steel sheets",
      "volume": "48",
      "author": "Mohr",
      "year": "2008",
      "journal-title": "Exp. Mech."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0250",
      "doi-asserted-by": "crossref",
      "first-page": "2515",
      "DOI": "10.1016/j.msea.2009.12.013",
      "article-title": "Experimental characterization and modeling of the hardening behavior of the sheet steel LH800",
      "volume": "A527",
      "author": "Noman",
      "year": "2010",
      "journal-title": "Mater. Sci. Eng."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0255",
      "doi-asserted-by": "crossref",
      "first-page": "1607",
      "DOI": "10.1016/S1359-6454(01)00066-0",
      "article-title": "Work-hardening softening behavior of B.C.C. polycrystals during changing strain paths \u2013 I. An integrated model based on substructure and texture evolution, and its prediction of the stress\u2013strain behavior of an IF steel during two-stage strain paths",
      "volume": "49",
      "author": "Peeters",
      "year": "2001",
      "journal-title": "Acta Mater."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0260",
      "unstructured": "Pietryga, M.P., Vladimirov, I.N., Reese, S., submitted for publication. A finite deformation model for evolving flow anisotropy with distortional hardening including experimental validation"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0265",
      "doi-asserted-by": "crossref",
      "first-page": "847",
      "DOI": "10.1016/j.ijplas.2007.07.013",
      "article-title": "Orthotropic yield criteria for description of the anisotropy in tension and compression of sheet metals",
      "volume": "24",
      "author": "Plunkett",
      "year": "2008",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0270",
      "doi-asserted-by": "crossref",
      "first-page": "303",
      "DOI": "10.1016/S0749-6419(99)00056-X",
      "article-title": "Ratchetting under tension-torsion loadings: experiments and modeling",
      "volume": "16",
      "author": "Portier",
      "year": "2000",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0275",
      "doi-asserted-by": "crossref",
      "first-page": "339",
      "DOI": "10.1016/S0749-6419(03)00092-5",
      "article-title": "Using texture components in crystal plasticity finite element simulations",
      "volume": "20",
      "author": "Raabe",
      "year": "2004",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0280",
      "doi-asserted-by": "crossref",
      "first-page": "2383",
      "DOI": "10.1016/j.ijplas.2009.04.002",
      "article-title": "A novel approach for anisotropic hardening modeling \u2013 Part I: Theory and its application to finite element analysis of deep drawing",
      "volume": "25",
      "author": "Rousselier",
      "year": "2009",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0285",
      "doi-asserted-by": "crossref",
      "first-page": "1029",
      "DOI": "10.1016/j.ijplas.2010.01.001",
      "article-title": "A novel approach for anisotropic hardening modeling \u2013 Part II: Anisotropic hardening in proportional and non-proportional loadings, application to initially isotropic material",
      "volume": "26",
      "author": "Rousselier",
      "year": "2010",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0290",
      "doi-asserted-by": "crossref",
      "first-page": "203",
      "DOI": "10.1016/j.mechmat.2005.06.007",
      "article-title": "Micro-mechanical modeling of the inelastic behavior of directionally solidified materials",
      "volume": "38",
      "author": "Sai",
      "year": "2006",
      "journal-title": "Mech. Mater."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0295",
      "doi-asserted-by": "crossref",
      "first-page": "915",
      "DOI": "10.1016/j.ijplas.2007.07.016",
      "article-title": "On the use of homogeneous polynomials to develop anisotropic yield functions with applications to sheet forming",
      "volume": "24",
      "author": "Soare",
      "year": "2008",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0300",
      "doi-asserted-by": "crossref",
      "first-page": "1777",
      "DOI": "10.1016/j.ijplas.2009.02.003",
      "article-title": "Anisotropic hardening and non-associated flow in proportional loading of sheet metals",
      "volume": "25",
      "author": "Stoughton",
      "year": "2009",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0305",
      "doi-asserted-by": "crossref",
      "first-page": "288",
      "DOI": "10.1016/j.ijplas.2009.07.003",
      "article-title": "A non-associated constitutive model with mixed iso-kinematic hardening for finite element simulation of sheet metal forming",
      "volume": "26",
      "author": "Taherizadeh",
      "year": "2010",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0315",
      "unstructured": "Teodosiu, C., 1992. In: Andersen, S.I. et al. (Eds), Proceedings of the 13rd Ris\u00f8 International Symposium on Materials Science, Ris\u00f8 National Laboratory, Roskilde, Denmark, pp. 125\u2013146."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0320",
      "unstructured": "Teodosiu, C., Hu, Z., 1995. Evolution of the intragranular microstructure at moderate and large strains: modelling and computational significance. In: Shen, S.F., Dawson, P.R. (Eds.), Simulation of Materials Processing: Theory, Methods and Applications. Balkema, Rotterdam, pp. 173\u2013182."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0325",
      "doi-asserted-by": "crossref",
      "first-page": "1505",
      "DOI": "10.1016/j.ijplas.2003.11.005",
      "article-title": "Convex plastic potentials of fourth and sixth rank for anisotropic materials",
      "volume": "20",
      "author": "Van Houtte",
      "year": "2004",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0330",
      "doi-asserted-by": "crossref",
      "first-page": "1817",
      "DOI": "10.1016/j.ijplas.2003.10.008",
      "article-title": "A general cyclic plasticity model taking into account yield surface distortion for multiaxial ratcheting",
      "volume": "20",
      "author": "Vincent",
      "year": "2002",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0335",
      "first-page": "582",
      "article-title": "Mechanik der Festen K\u00f6rper im plastisch deformable Zustand",
      "volume": "1",
      "author": "Von Mises",
      "year": "1913",
      "journal-title": "G\u00f6ttin. Nachr. Math. Phys."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0340",
      "doi-asserted-by": "crossref",
      "first-page": "1039",
      "DOI": "10.1016/j.ijplas.2007.08.009",
      "article-title": "On the modeling of hardening in metals during non-proportional loading",
      "volume": "24",
      "author": "Wang",
      "year": "2008",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0345",
      "doi-asserted-by": "crossref",
      "first-page": "723",
      "DOI": "10.1016/j.ijplas.2004.05.007",
      "article-title": "On pre-straining and the evolution of material anisotropy in sheet metals",
      "volume": "21",
      "author": "Wu",
      "year": "2005",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0350",
      "doi-asserted-by": "crossref",
      "first-page": "495",
      "DOI": "10.1016/S0749-6419(03)00099-8",
      "article-title": "Plane stress yield function for aluminum alloy sheets \u2013 Part II: FE formulation and its implementation",
      "volume": "20",
      "author": "Yoon",
      "year": "2004",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0355",
      "doi-asserted-by": "crossref",
      "first-page": "174",
      "DOI": "10.1016/j.ijplas.2005.03.013",
      "article-title": "Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function",
      "volume": "22",
      "author": "Yoon",
      "year": "2006",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0360",
      "doi-asserted-by": "crossref",
      "first-page": "134",
      "DOI": "10.1016/j.jmatprotec.2006.03.189",
      "article-title": "Modeling of aluminum alloy sheets based on new anisotropic yield function",
      "volume": "177",
      "author": "Yoon",
      "year": "2006",
      "journal-title": "J. Mater. Proc. Technol."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0365",
      "doi-asserted-by": "crossref",
      "first-page": "23",
      "DOI": "10.1016/S0045-7825(98)00275-8",
      "article-title": "Elasto-plastic finite element method based on incremental deformation theory and continuum based shell elements for planar anisotropic sheet materials",
      "volume": "174",
      "author": "Yoon",
      "year": "1999",
      "journal-title": "Comput. Methods Appl. Mech. Eng."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0370",
      "doi-asserted-by": "crossref",
      "first-page": "35",
      "DOI": "10.1016/S0749-6419(98)00059-X",
      "article-title": "A general elasto-plastic finite element formulation based on incremental deformation theory for planar anisotropy and its application to sheet metal forming",
      "volume": "15",
      "author": "Yoon",
      "year": "1999",
      "journal-title": "Int. J. Plasticity"
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0375",
      "doi-asserted-by": "crossref",
      "first-page": "984",
      "DOI": "10.1002/1527-2648(200112)3:12<984::AID-ADEM984>3.0.CO;2-L",
      "article-title": "Introduction of a texture component crystal plasticity finite element method for anisotropic simulations",
      "volume": "3",
      "author": "Zhao",
      "year": "2001",
      "journal-title": "Adv. Eng. Mater."
    },
    {
      "key": "10.1016/j.ijplas.2011.10.004_b0380",
      "unstructured": "Z-set manual, 2007. ONERA: zebulon.onera.fr, Transvalor/MINES ParisTech and Northwest Numerics, Inc."
    }
  ],
  "container-title": "International Journal of Plasticity",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://api.elsevier.com/content/article/PII:S0749641911001689?httpAccept=text/xml",
      "content-type": "text/xml",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "https://api.elsevier.com/content/article/PII:S0749641911001689?httpAccept=text/plain",
      "content-type": "text/plain",
      "content-version": "vor",
      "intended-application": "text-mining"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2018,
        11,
        29
      ]
    ],
    "date-time": "2018-11-29T14:29:23Z",
    "timestamp": 1543501763000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "https://linkinghub.elsevier.com/retrieve/pii/S0749641911001689"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        2012,
        3
      ]
    ]
  },
  "references-count": 74,
  "alternative-id": [
    "S0749641911001689"
  ],
  "URL": "http://dx.doi.org/10.1016/j.ijplas.2011.10.004",
  "relation": {},
  "ISSN": [
    "0749-6419"
  ],
  "subject": [],
  "container-title-short": "International Journal of Plasticity",
  "published": {
    "date-parts": [
      [
        2012,
        3
      ]
    ]
  }
}