DOI: 10.1016/j.ijmachtools.2005.02.003. Key improvements in the machining of difficult-to-cut aerospace superalloys

Key improvements in the machining of difficult-to-cut aerospace superalloys

10.1016/j.ijmachtools.2005.02.003

Crossref journal-article

Elsevier BV

International Journal of Machine Tools and Manufacture (78)

Authors 1

E.O. Ezugwu (first)

References 36 Referenced 757

10.1016/S0043-1648(99)00361-0 / Wear / Cryogenic machining of hard-to-cut materials by Wang (2000)
Seco Technical guide, Turning Difficult-To-Machine Alloys.
10.1179/isr.1996.21.2.117 / Interdisciplinary Science Review / Advanced materials means advanced engines by Miller (1996)
10.1016/0921-5093(96)10233-1 / Journal of Material Science and Engineering / An overview on the use of titanium in aerospace industry by Boyer (1996)
10.1016/S0924-0136(96)00030-1 / Journal of Materials Processing Technology / Titanium alloys and their machinability—a review by Ezugwu (1997)
10.1016/S0924-0136(02)01042-7 / Journal of Material Processing Technology / An overview of the machinability of aeroengine alloys by Ezugwu (2003)
10.1115/1.3187113 / Journal of Engineering for Industry / On tool materials for high speed machining by Kramer (1987)
{'article-title': 'Towards improved tests based on fundamental properties', 'year': '1981', 'author': 'Almond', 'key': '10.1016/j.ijmachtools.2005.02.003_bib8'} / Towards improved tests based on fundamental properties by Almond (1981)
{'year': '1996', 'series-title': 'Advanced Machining of Titanium and Nickel-Base Alloys, Advanced Manufacturing Systems and Technology, CISM Courses and Lectures No. 372', 'author': 'Klocke', 'key': '10.1016/j.ijmachtools.2005.02.003_bib9'} / Advanced Machining of Titanium and Nickel-Base Alloys, Advanced Manufacturing Systems and Technology, CISM Courses and Lectures No. 372 by Klocke (1996)
10.1016/S0007-8506(07)62389-0 / Annals of the CIRP / Computer aided predictive models for fundamental rotary tool cutting process by Armarego (1993)
W.Y. Chen, Machining of Hardened Steel Using Superhard Tooling, PCD and CBN Tipped Rotary Cutting Tools. PhD Thesis, University of Birmingham, UK, 1993.
10.1590/S1678-58782004000100001 / Journal of Brazilian Society of Mechanical Science and Engineering / High speed machining of aero-engine alloys by Ezugwu (2004)
{'issue': '3', 'key': '10.1016/j.ijmachtools.2005.02.003_bib13', 'first-page': '547', 'article-title': 'Hi-Jet system for increasing tool life', 'volume': '6', 'author': 'Pigott', 'year': '1952', 'journal-title': 'SAE Quarterly Transactions'} / SAE Quarterly Transactions / Hi-Jet system for increasing tool life by Pigott (1952)
10.1016/0011-2275(95)98219-Q / Cryogenics / Effect of cryogenic cooling by liquid nitrogen jet on forces, temperature and surface residual stresses in grinding steels by Paul (1995)
10.1115/1.3188736 / Journal of Engineering for Industry / Metal machining with high-pressure water-jet cooling assistance—a new possibility by Mazurkiewicz (1989)
E.O. Ezugwu, J. Bonney, Effect of high-pressure coolant supply when machining nickel-base, Inconel 718, alloy with coated carbide tools, in: Proceedings of AMPT2003, 8–11 July 2003, Dublin, Ireland, pp. 787–790.
{'key': '10.1016/j.ijmachtools.2005.02.003_bib17', 'first-page': '564', 'article-title': 'Effect of high-pressure coolant supplies when machining nickel-base, Inconel 718, alloy with ceramic tools', 'volume': '4', 'author': 'Ezugwu', 'year': '2003', 'journal-title': 'Tribology Transactions'} / Tribology Transactions / Effect of high-pressure coolant supplies when machining nickel-base, Inconel 718, alloy with ceramic tools by Ezugwu (2003)
{'issue': '9', 'key': '10.1016/j.ijmachtools.2005.02.003_bib18', 'first-page': '751', 'article-title': 'The effect of high-pressure coolant supply when machining a heat-resistant nickel-based superalloy', 'volume': '47', 'author': 'Ezugwu', 'year': '1991', 'journal-title': 'Lubrication Engineering'} / Lubrication Engineering / The effect of high-pressure coolant supply when machining a heat-resistant nickel-based superalloy by Ezugwu (1991)
10.1016/S0043-1648(02)00118-7 / Wear / An experimental study to correlate water-jet impingement erosion resistance and properties of metallic materials and coatings by Mann (2002)
E.O. Ezugwu, J. Bonney, Finish machining of nickel-base, Inconel 718, alloy with coated carbide tool under conventional and high-pressure coolant supplies, Tribiology Transactions 48 (1) (2005) 76–81. (10.1080/05698190590899958)
10.1243/0954405991517191 / Proceeding of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture / Chip control in tube turning using a high-pressure water jet by Crafoord (1999)
10.1080/05698190590890290 / Tribology Transactions / The effect of argon enriched environment in high speed machining of titanium alloy by Ezugwu (2005)
10.1016/0924-0136(95)01893-X / Journal of Material Processing Technology / Cutting fluids: part II. Recycling and clean machining by El Baradie (1996)
10.1016/S0924-0136(01)01249-3 / Journal of Material Processing Technology / Using a minimum quantity of lubricant (MQL) and diamond coated tool in the drilling of aluminium–silicon alloys by Braga (2002)
10.1016/S0257-8972(99)00004-3 / Surface and Coating Technology / New hard/lubricant coating for dry machining by Derflinger (1999)
10.1016/S0043-1648(97)00059-8 / Wear / The effect of extremely low lubricant volumes in machining by Machado (1997)
10.1016/S0890-6955(96)00037-5 / International Journal of Machine Tools Manufacture / Wear of CBN tool in turning of silicon nitride with cryogenic cooling by Wang (1997)
10.1016/S0890-6955(01)00026-8 / International Journal of Machine Tools and Manufacture / Cooling approaches and cutting temperatures in cryogenic machining of Ti–6Al–4V by Hong (2001)
10.1016/S0890-6955(01)00041-4 / International Journal of Machine Tools and Manufacture / New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti–6Al–4V by Hong (2001)
10.1016/S0043-1648(99)00361-0 / Wear / Cryogenic machining of hard-to-cut materials by Wang (2000)
{'key': '10.1016/j.ijmachtools.2005.02.003_bib31', 'first-page': '761', 'article-title': 'Basic factors in hot-machining of metals', 'volume': '73', 'author': 'Krabacher', 'year': '1951', 'journal-title': 'Transactions ASME'} / Transactions ASME / Basic factors in hot-machining of metals by Krabacher (1951)
10.1016/S0007-8506(07)63369-1 / Annals of the CIRP / Cutting performance of coated carbides in electric hot machining of low machinability metals by Uehara (1983)
{'key': '10.1016/j.ijmachtools.2005.02.003_bib33', 'first-page': '78', 'article-title': 'Hot spot machining', 'volume': '164', 'author': 'Tour', 'year': '1949', 'journal-title': 'Iron Age'} / Iron Age / Hot spot machining by Tour (1949)
10.1016/0043-1648(90)90049-G / Wear / Plasma hot machining for new engineering materials by Kitagawa (1990)
10.1016/0924-0136(94)90432-4 / Journal of Materials Processing Technology / Hot machining process for improved metal removal rates in turning operations by Madhavulu (1994)
10.1016/S0890-6955(03)00134-2 / International Journal of Machine Tools and Manufacture / Hybrid machining of Inconel 718 by Wang (2003)

Dates

Type	When
Created	20 years, 4 months ago (March 29, 2005, 2:35 a.m.)
Deposited	6 years, 6 months ago (Feb. 7, 2019, 11:12 a.m.)
Indexed	18 hours, 21 minutes ago (Aug. 27, 2025, 12:15 p.m.)
Issued	19 years, 10 months ago (Oct. 1, 2005)
Published	19 years, 10 months ago (Oct. 1, 2005)
Published Print	19 years, 10 months ago (Oct. 1, 2005)

Funders 0

None

BibTeX

@article{Ezugwu_2005, title={Key improvements in the machining of difficult-to-cut aerospace superalloys}, volume={45}, ISSN={0890-6955}, url={http://dx.doi.org/10.1016/j.ijmachtools.2005.02.003}, DOI={10.1016/j.ijmachtools.2005.02.003}, number={12–13}, journal={International Journal of Machine Tools and Manufacture}, publisher={Elsevier BV}, author={Ezugwu, E.O.}, year={2005}, month=oct, pages={1353–1367} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2025,
        8,
        27
      ]
    ],
    "date-time": "2025-08-27T16:15:13Z",
    "timestamp": 1756311313117
  },
  "reference-count": 36,
  "publisher": "Elsevier BV",
  "issue": "12-13",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            2005,
            10,
            1
          ]
        ],
        "date-time": "2005-10-01T00:00:00Z",
        "timestamp": 1128124800000
      },
      "content-version": "tdm",
      "delay-in-days": 0,
      "URL": "https://www.elsevier.com/tdm/userlicense/1.0/"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        2005,
        10
      ]
    ]
  },
  "DOI": "10.1016/j.ijmachtools.2005.02.003",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2005,
        3,
        29
      ]
    ],
    "date-time": "2005-03-29T07:35:21Z",
    "timestamp": 1112081721000
  },
  "page": "1353-1367",
  "source": "Crossref",
  "is-referenced-by-count": 757,
  "title": "Key improvements in the machining of difficult-to-cut aerospace superalloys",
  "prefix": "10.1016",
  "volume": "45",
  "author": [
    {
      "given": "E.O.",
      "family": "Ezugwu",
      "sequence": "first",
      "affiliation": []
    }
  ],
  "member": "78",
  "reference": [
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib1",
      "doi-asserted-by": "crossref",
      "first-page": "168",
      "DOI": "10.1016/S0043-1648(99)00361-0",
      "article-title": "Cryogenic machining of hard-to-cut materials",
      "volume": "239",
      "author": "Wang",
      "year": "2000",
      "journal-title": "Wear"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib2",
      "unstructured": "Seco Technical guide, Turning Difficult-To-Machine Alloys."
    },
    {
      "issue": "2",
      "key": "10.1016/j.ijmachtools.2005.02.003_bib3",
      "doi-asserted-by": "crossref",
      "first-page": "117",
      "DOI": "10.1179/isr.1996.21.2.117",
      "article-title": "Advanced materials means advanced engines",
      "volume": "21",
      "author": "Miller",
      "year": "1996",
      "journal-title": "Interdisciplinary Science Review"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib4",
      "doi-asserted-by": "crossref",
      "first-page": "103",
      "DOI": "10.1016/0921-5093(96)10233-1",
      "article-title": "An overview on the use of titanium in aerospace industry",
      "volume": "A213",
      "author": "Boyer",
      "year": "1996",
      "journal-title": "Journal of Material Science and Engineering"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib5",
      "doi-asserted-by": "crossref",
      "first-page": "262",
      "DOI": "10.1016/S0924-0136(96)00030-1",
      "article-title": "Titanium alloys and their machinability\u2014a review",
      "volume": "68",
      "author": "Ezugwu",
      "year": "1997",
      "journal-title": "Journal of Materials Processing Technology"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib6",
      "doi-asserted-by": "crossref",
      "first-page": "233",
      "DOI": "10.1016/S0924-0136(02)01042-7",
      "article-title": "An overview of the machinability of aeroengine alloys",
      "volume": "134",
      "author": "Ezugwu",
      "year": "2003",
      "journal-title": "Journal of Material Processing Technology"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib7",
      "doi-asserted-by": "crossref",
      "first-page": "87",
      "DOI": "10.1115/1.3187113",
      "article-title": "On tool materials for high speed machining",
      "volume": "109",
      "author": "Kramer",
      "year": "1987",
      "journal-title": "Journal of Engineering for Industry"
    },
    {
      "article-title": "Towards improved tests based on fundamental properties",
      "year": "1981",
      "author": "Almond",
      "key": "10.1016/j.ijmachtools.2005.02.003_bib8"
    },
    {
      "year": "1996",
      "series-title": "Advanced Machining of Titanium and Nickel-Base Alloys, Advanced Manufacturing Systems and Technology, CISM Courses and Lectures No. 372",
      "author": "Klocke",
      "key": "10.1016/j.ijmachtools.2005.02.003_bib9"
    },
    {
      "issue": "1",
      "key": "10.1016/j.ijmachtools.2005.02.003_bib10",
      "doi-asserted-by": "crossref",
      "first-page": "49",
      "DOI": "10.1016/S0007-8506(07)62389-0",
      "article-title": "Computer aided predictive models for fundamental rotary tool cutting process",
      "volume": "42",
      "author": "Armarego",
      "year": "1993",
      "journal-title": "Annals of the CIRP"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib11",
      "unstructured": "W.Y. Chen, Machining of Hardened Steel Using Superhard Tooling, PCD and CBN Tipped Rotary Cutting Tools. PhD Thesis, University of Birmingham, UK, 1993."
    },
    {
      "issue": "1",
      "key": "10.1016/j.ijmachtools.2005.02.003_bib12",
      "doi-asserted-by": "crossref",
      "first-page": "1",
      "DOI": "10.1590/S1678-58782004000100001",
      "article-title": "High speed machining of aero-engine alloys",
      "volume": "26",
      "author": "Ezugwu",
      "year": "2004",
      "journal-title": "Journal of Brazilian Society of Mechanical Science and Engineering"
    },
    {
      "issue": "3",
      "key": "10.1016/j.ijmachtools.2005.02.003_bib13",
      "first-page": "547",
      "article-title": "Hi-Jet system for increasing tool life",
      "volume": "6",
      "author": "Pigott",
      "year": "1952",
      "journal-title": "SAE Quarterly Transactions"
    },
    {
      "issue": "8",
      "key": "10.1016/j.ijmachtools.2005.02.003_bib14",
      "doi-asserted-by": "crossref",
      "first-page": "515",
      "DOI": "10.1016/0011-2275(95)98219-Q",
      "article-title": "Effect of cryogenic cooling by liquid nitrogen jet on forces, temperature and surface residual stresses in grinding steels",
      "volume": "35",
      "author": "Paul",
      "year": "1995",
      "journal-title": "Cryogenics"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib15",
      "doi-asserted-by": "crossref",
      "first-page": "7",
      "DOI": "10.1115/1.3188736",
      "article-title": "Metal machining with high-pressure water-jet cooling assistance\u2014a new possibility",
      "volume": "111",
      "author": "Mazurkiewicz",
      "year": "1989",
      "journal-title": "Journal of Engineering for Industry"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib16",
      "unstructured": "E.O. Ezugwu, J. Bonney, Effect of high-pressure coolant supply when machining nickel-base, Inconel 718, alloy with coated carbide tools, in: Proceedings of AMPT2003, 8\u201311 July 2003, Dublin, Ireland, pp. 787\u2013790."
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib17",
      "first-page": "564",
      "article-title": "Effect of high-pressure coolant supplies when machining nickel-base, Inconel 718, alloy with ceramic tools",
      "volume": "4",
      "author": "Ezugwu",
      "year": "2003",
      "journal-title": "Tribology Transactions"
    },
    {
      "issue": "9",
      "key": "10.1016/j.ijmachtools.2005.02.003_bib18",
      "first-page": "751",
      "article-title": "The effect of high-pressure coolant supply when machining a heat-resistant nickel-based superalloy",
      "volume": "47",
      "author": "Ezugwu",
      "year": "1991",
      "journal-title": "Lubrication Engineering"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib19",
      "doi-asserted-by": "crossref",
      "first-page": "650",
      "DOI": "10.1016/S0043-1648(02)00118-7",
      "article-title": "An experimental study to correlate water-jet impingement erosion resistance and properties of metallic materials and coatings",
      "volume": "253",
      "author": "Mann",
      "year": "2002",
      "journal-title": "Wear"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib20",
      "doi-asserted-by": "crossref",
      "unstructured": "E.O. Ezugwu, J. Bonney, Finish machining of nickel-base, Inconel 718, alloy with coated carbide tool under conventional and high-pressure coolant supplies, Tribiology Transactions 48 (1) (2005) 76\u201381.",
      "DOI": "10.1080/05698190590899958"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib21",
      "doi-asserted-by": "crossref",
      "first-page": "761",
      "DOI": "10.1243/0954405991517191",
      "article-title": "Chip control in tube turning using a high-pressure water jet",
      "volume": "208",
      "author": "Crafoord",
      "year": "1999",
      "journal-title": "Proceeding of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture"
    },
    {
      "issue": "1",
      "key": "10.1016/j.ijmachtools.2005.02.003_bib22",
      "doi-asserted-by": "crossref",
      "first-page": "1",
      "DOI": "10.1080/05698190590890290",
      "article-title": "The effect of argon enriched environment in high speed machining of titanium alloy",
      "volume": "48",
      "author": "Ezugwu",
      "year": "2005",
      "journal-title": "Tribology Transactions"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib23",
      "doi-asserted-by": "crossref",
      "first-page": "798",
      "DOI": "10.1016/0924-0136(95)01893-X",
      "article-title": "Cutting fluids: part II. Recycling and clean machining",
      "volume": "56",
      "author": "El Baradie",
      "year": "1996",
      "journal-title": "Journal of Material Processing Technology"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib24",
      "doi-asserted-by": "crossref",
      "first-page": "127",
      "DOI": "10.1016/S0924-0136(01)01249-3",
      "article-title": "Using a minimum quantity of lubricant (MQL) and diamond coated tool in the drilling of aluminium\u2013silicon alloys",
      "volume": "122",
      "author": "Braga",
      "year": "2002",
      "journal-title": "Journal of Material Processing Technology"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib25",
      "doi-asserted-by": "crossref",
      "first-page": "286",
      "DOI": "10.1016/S0257-8972(99)00004-3",
      "article-title": "New hard/lubricant coating for dry machining",
      "volume": "113",
      "author": "Derflinger",
      "year": "1999",
      "journal-title": "Surface and Coating Technology"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib26",
      "doi-asserted-by": "crossref",
      "first-page": "76",
      "DOI": "10.1016/S0043-1648(97)00059-8",
      "article-title": "The effect of extremely low lubricant volumes in machining",
      "volume": "210",
      "author": "Machado",
      "year": "1997",
      "journal-title": "Wear"
    },
    {
      "issue": "3",
      "key": "10.1016/j.ijmachtools.2005.02.003_bib27",
      "doi-asserted-by": "crossref",
      "first-page": "319",
      "DOI": "10.1016/S0890-6955(96)00037-5",
      "article-title": "Wear of CBN tool in turning of silicon nitride with cryogenic cooling",
      "volume": "37",
      "author": "Wang",
      "year": "1997",
      "journal-title": "International Journal of Machine Tools Manufacture"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib28",
      "doi-asserted-by": "crossref",
      "first-page": "1417",
      "DOI": "10.1016/S0890-6955(01)00026-8",
      "article-title": "Cooling approaches and cutting temperatures in cryogenic machining of Ti\u20136Al\u20134V",
      "volume": "41",
      "author": "Hong",
      "year": "2001",
      "journal-title": "International Journal of Machine Tools and Manufacture"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib29",
      "doi-asserted-by": "crossref",
      "first-page": "2245",
      "DOI": "10.1016/S0890-6955(01)00041-4",
      "article-title": "New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti\u20136Al\u20134V",
      "volume": "41",
      "author": "Hong",
      "year": "2001",
      "journal-title": "International Journal of Machine Tools and Manufacture"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib30",
      "doi-asserted-by": "crossref",
      "first-page": "168",
      "DOI": "10.1016/S0043-1648(99)00361-0",
      "article-title": "Cryogenic machining of hard-to-cut materials",
      "volume": "239",
      "author": "Wang",
      "year": "2000",
      "journal-title": "Wear"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib31",
      "first-page": "761",
      "article-title": "Basic factors in hot-machining of metals",
      "volume": "73",
      "author": "Krabacher",
      "year": "1951",
      "journal-title": "Transactions ASME"
    },
    {
      "issue": "1",
      "key": "10.1016/j.ijmachtools.2005.02.003_bib32",
      "doi-asserted-by": "crossref",
      "first-page": "97",
      "DOI": "10.1016/S0007-8506(07)63369-1",
      "article-title": "Cutting performance of coated carbides in electric hot machining of low machinability metals",
      "volume": "32",
      "author": "Uehara",
      "year": "1983",
      "journal-title": "Annals of the CIRP"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib33",
      "first-page": "78",
      "article-title": "Hot spot machining",
      "volume": "164",
      "author": "Tour",
      "year": "1949",
      "journal-title": "Iron Age"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib34",
      "doi-asserted-by": "crossref",
      "first-page": "251",
      "DOI": "10.1016/0043-1648(90)90049-G",
      "article-title": "Plasma hot machining for new engineering materials",
      "volume": "139",
      "author": "Kitagawa",
      "year": "1990",
      "journal-title": "Wear"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib35",
      "doi-asserted-by": "crossref",
      "first-page": "199",
      "DOI": "10.1016/0924-0136(94)90432-4",
      "article-title": "Hot machining process for improved metal removal rates in turning operations",
      "volume": "44",
      "author": "Madhavulu",
      "year": "1994",
      "journal-title": "Journal of Materials Processing Technology"
    },
    {
      "key": "10.1016/j.ijmachtools.2005.02.003_bib36",
      "doi-asserted-by": "crossref",
      "first-page": "1391",
      "DOI": "10.1016/S0890-6955(03)00134-2",
      "article-title": "Hybrid machining of Inconel 718",
      "volume": "43",
      "author": "Wang",
      "year": "2003",
      "journal-title": "International Journal of Machine Tools and Manufacture"
    }
  ],
  "container-title": "International Journal of Machine Tools and Manufacture",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://api.elsevier.com/content/article/PII:S0890695505000544?httpAccept=text/xml",
      "content-type": "text/xml",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "https://api.elsevier.com/content/article/PII:S0890695505000544?httpAccept=text/plain",
      "content-type": "text/plain",
      "content-version": "vor",
      "intended-application": "text-mining"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2019,
        2,
        7
      ]
    ],
    "date-time": "2019-02-07T16:12:26Z",
    "timestamp": 1549555946000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "https://linkinghub.elsevier.com/retrieve/pii/S0890695505000544"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        2005,
        10
      ]
    ]
  },
  "references-count": 36,
  "journal-issue": {
    "issue": "12-13",
    "published-print": {
      "date-parts": [
        [
          2005,
          10
        ]
      ]
    }
  },
  "alternative-id": [
    "S0890695505000544"
  ],
  "URL": "http://dx.doi.org/10.1016/j.ijmachtools.2005.02.003",
  "relation": {},
  "ISSN": [
    "0890-6955"
  ],
  "subject": [],
  "container-title-short": "International Journal of Machine Tools and Manufacture",
  "published": {
    "date-parts": [
      [
        2005,
        10
      ]
    ]
  }
}