DOI: 10.1016/s1359-835x(00)00091-9. Fragmentation analysis of glass fibres in model composites through the use of Raman spectroscopy

Fragmentation analysis of glass fibres in model composites through the use of Raman spectroscopy

10.1016/s1359-835x(00)00091-9

Crossref journal-article

Elsevier BV

Composites Part A: Applied Science and Manufacturing (78)

Bibliography

Young, R. J., Thongpin, C., Stanford, J. L., & Lovell, P. A. (2001). Fragmentation analysis of glass fibres in model composites through the use of Raman spectroscopy. Composites Part A: Applied Science and Manufacturing, 32(2), 253â269.

Authors 4

R.J. Young (first)
C. Thongpin (additional)
J.L. Stanford (additional)
P.A. Lovell (additional)

References 25 Referenced 29

10.1016/0266-3538(95)00030-5 / Comp Sci Tech / Analysis of the single-fibre pull-out test using Raman spectroscopy. Part II: Micromechanics of deformation for an aramid/epoxy system by Bannister (1995)
10.1163/156855494X00328 / Comp Interf / Interfacial failure mechanisms in aramid/epoxy model composites by Andrews (1994)
10.1007/BF00729184 / J Mater Sci Lett / Application of laser Raman spectroscopy to the analysis of stress distribution of fibres in composites by Sato (1992)
10.1016/1359-835X(96)00060-7 / Composites / Interfacial micromechanics in thermoplastic and thermosetting matrix carbon-fibre composites by Huang (1996)
10.1016/0010-4361(94)90174-0 / Composites / Model ceramic fibre reinforced glass composites: residual thermal stresses by Yang (1994)
10.1016/S1359-835X(98)00058-X / Composites A: Appl Sci Manufact / Micromechanics of fibre fragmentation in model epoxy composites reinforced with α-alumina fibres by Yallee (1998)
10.1016/0032-3861(91)90410-K / Polymer / Formation and properties of urethane–diacetylene segmented block copolymers by Stanford (1991)
10.1007/BF00294543 / Polym Bull / The opto-mechanical behaviour of diacetylene-containing segmented block copolymer by Day (1991)
10.1016/0033-0655(92)80029-V / Prog Organic Coatings / The formation, structure and properties of urethane–diacetylene copolymers as optical strain-sensitive surface coatings by Stanford (1992)
10.1021/ma00028a028 / Macromolecules / Synthesis, characterisation and structure of glassy diacetylene-containing segmented block copolyurethanes by Hu (1992)
10.1021/ma00028a029 / Macromolecules / Molecular deformation and opto-mechanical behaviour of glassy diacetylene-containing segmented block copolyurethanes by Hu (1992)
10.1007/BF01119768 / J Mater Sci / Strain measurement in diacetylene-containing copolymers using Raman spectroscopy by Hu (1992)
10.1016/0032-3861(94)90053-1 / Polymer / Strain measurement and deformation analysis in a diacetylene-containing urethane copolymer using Raman spectroscopy by Hu (1994)
10.1002/pol.1984.180220903 / J Polym Sci, Polym Phys Ed / High modulus polydiacetylene single crystal fibres by Galiotis (1984)
Thongpin C. Development of diacetylene-containing urethane copolymers for strain measurement applications. PhD thesis. UMIST, 1998.
10.1088/0508-3443/3/3/302 / Br J Appl Phys / The elasticity and strength of paper and other fibrous materials by Cox (1952)
{'key': '10.1016/S1359-835X(00)00091-9_BIB17', 'series-title': 'Strong solids', 'author': 'Kelly', 'year': '1986'} / Strong solids by Kelly (1986)
10.1023/A:1004357121802 / J Mater Sci / Definition and measurement of the shear-lag parameter, beta, as an index of the stress transfer efficiency in polymer composites by Galiotis (1998)
10.1016/0010-4361(94)90210-0 / Composites / Analysis of the single-fibre pull-out test using Raman spectroscopy. Part I: pull-out of aramid fibres from an epoxy resin by Andrews (1994)
10.1007/BF00352650 / J Mater Sci / The interfacial properties of aramid/epoxy model composites by Andrews (1996)
10.1016/S0167-6636(97)00023-9 / Mech Mater / On the use of shear-lag methods for analysis of stress transfer in unidirectional composites by Nairn (1997)
10.1016/0022-5096(65)90035-9 / J Mech Phys Sol / Tensile properties of fibre-reinforced metals: copper/tungsten and copper/molybdenum by Kelly (1965)
10.1016/S1359-835X(98)00020-7 / Composites A: Appl Sci Manufact / Evidence of dynamic effects in the fragmentation of optical fibres in epoxy by Wagner (1998)
10.1016/0010-4361(92)90282-Y / Composites / Comparison of methods for the measurement of fibre/matrix adhesion in composites by Herrera-Franco (1992)
10.1016/S0266-3538(97)00016-X / Comp. Sci. Tech. / Measurement of the load-bearing capability of the fibre/matrix interface by single-fibre fragmentation by Tripathi (1997)

Dates

Type	When
Created	23 years, 1 month ago (July 25, 2002, 1:56 p.m.)
Deposited	4 years, 3 months ago (May 9, 2021, 8:03 a.m.)
Indexed	3 months, 2 weeks ago (May 13, 2025, 6:31 p.m.)
Issued	24 years, 6 months ago (Feb. 1, 2001)
Published	24 years, 6 months ago (Feb. 1, 2001)
Published Print	24 years, 6 months ago (Feb. 1, 2001)

Funders 0

None

BibTeX

@article{Young_2001, title={Fragmentation analysis of glass fibres in model composites through the use of Raman spectroscopy}, volume={32}, ISSN={1359-835X}, url={http://dx.doi.org/10.1016/s1359-835x(00)00091-9}, DOI={10.1016/s1359-835x(00)00091-9}, number={2}, journal={Composites Part A: Applied Science and Manufacturing}, publisher={Elsevier BV}, author={Young, R.J. and Thongpin, C. and Stanford, J.L. and Lovell, P.A.}, year={2001}, month=feb, pages={253–269} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2025,
        5,
        13
      ]
    ],
    "date-time": "2025-05-13T22:31:48Z",
    "timestamp": 1747175508503
  },
  "reference-count": 25,
  "publisher": "Elsevier BV",
  "issue": "2",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            2001,
            2,
            1
          ]
        ],
        "date-time": "2001-02-01T00:00:00Z",
        "timestamp": 980985600000
      },
      "content-version": "tdm",
      "delay-in-days": 0,
      "URL": "https://www.elsevier.com/tdm/userlicense/1.0/"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        2001,
        2
      ]
    ]
  },
  "DOI": "10.1016/s1359-835x(00)00091-9",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2002,
        7,
        25
      ]
    ],
    "date-time": "2002-07-25T17:56:21Z",
    "timestamp": 1027619781000
  },
  "page": "253-269",
  "source": "Crossref",
  "is-referenced-by-count": 29,
  "title": "Fragmentation analysis of glass fibres in model composites through the use of Raman spectroscopy",
  "prefix": "10.1016",
  "volume": "32",
  "author": [
    {
      "given": "R.J.",
      "family": "Young",
      "sequence": "first",
      "affiliation": []
    },
    {
      "given": "C.",
      "family": "Thongpin",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "J.L.",
      "family": "Stanford",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "P.A.",
      "family": "Lovell",
      "sequence": "additional",
      "affiliation": []
    }
  ],
  "member": "78",
  "reference": [
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB1",
      "doi-asserted-by": "crossref",
      "first-page": "411",
      "DOI": "10.1016/0266-3538(95)00030-5",
      "article-title": "Analysis of the single-fibre pull-out test using Raman spectroscopy. Part II: Micromechanics of deformation for an aramid/epoxy system",
      "volume": "53",
      "author": "Bannister",
      "year": "1995",
      "journal-title": "Comp Sci Tech"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB2",
      "doi-asserted-by": "crossref",
      "first-page": "433",
      "DOI": "10.1163/156855494X00328",
      "article-title": "Interfacial failure mechanisms in aramid/epoxy model composites",
      "volume": "2",
      "author": "Andrews",
      "year": "1994",
      "journal-title": "Comp Interf"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB3",
      "doi-asserted-by": "crossref",
      "first-page": "365",
      "DOI": "10.1007/BF00729184",
      "article-title": "Application of laser Raman spectroscopy to the analysis of stress distribution of fibres in composites",
      "volume": "11",
      "author": "Sato",
      "year": "1992",
      "journal-title": "J Mater Sci Lett"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB4",
      "doi-asserted-by": "crossref",
      "first-page": "973",
      "DOI": "10.1016/1359-835X(96)00060-7",
      "article-title": "Interfacial micromechanics in thermoplastic and thermosetting matrix carbon-fibre composites",
      "volume": "27A",
      "author": "Huang",
      "year": "1996",
      "journal-title": "Composites"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB5",
      "doi-asserted-by": "crossref",
      "first-page": "488",
      "DOI": "10.1016/0010-4361(94)90174-0",
      "article-title": "Model ceramic fibre reinforced glass composites: residual thermal stresses",
      "volume": "25",
      "author": "Yang",
      "year": "1994",
      "journal-title": "Composites"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB6",
      "doi-asserted-by": "crossref",
      "first-page": "1353",
      "DOI": "10.1016/S1359-835X(98)00058-X",
      "article-title": "Micromechanics of fibre fragmentation in model epoxy composites reinforced with \u03b1-alumina fibres",
      "volume": "29",
      "author": "Yallee",
      "year": "1998",
      "journal-title": "Composites A: Appl Sci Manufact"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB7",
      "doi-asserted-by": "crossref",
      "first-page": "1713",
      "DOI": "10.1016/0032-3861(91)90410-K",
      "article-title": "Formation and properties of urethane\u2013diacetylene segmented block copolymers",
      "volume": "32",
      "author": "Stanford",
      "year": "1991",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB8",
      "doi-asserted-by": "crossref",
      "first-page": "353",
      "DOI": "10.1007/BF00294543",
      "article-title": "The opto-mechanical behaviour of diacetylene-containing segmented block copolymer",
      "volume": "27",
      "author": "Day",
      "year": "1991",
      "journal-title": "Polym Bull"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB9",
      "doi-asserted-by": "crossref",
      "first-page": "425",
      "DOI": "10.1016/0033-0655(92)80029-V",
      "article-title": "The formation, structure and properties of urethane\u2013diacetylene copolymers as optical strain-sensitive surface coatings",
      "volume": "20",
      "author": "Stanford",
      "year": "1992",
      "journal-title": "Prog Organic Coatings"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB10",
      "doi-asserted-by": "crossref",
      "first-page": "672",
      "DOI": "10.1021/ma00028a028",
      "article-title": "Synthesis, characterisation and structure of glassy diacetylene-containing segmented block copolyurethanes",
      "volume": "25",
      "author": "Hu",
      "year": "1992",
      "journal-title": "Macromolecules"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB11",
      "doi-asserted-by": "crossref",
      "first-page": "684",
      "DOI": "10.1021/ma00028a029",
      "article-title": "Molecular deformation and opto-mechanical behaviour of glassy diacetylene-containing segmented block copolyurethanes",
      "volume": "25",
      "author": "Hu",
      "year": "1992",
      "journal-title": "Macromolecules"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB12",
      "doi-asserted-by": "crossref",
      "first-page": "5958",
      "DOI": "10.1007/BF01119768",
      "article-title": "Strain measurement in diacetylene-containing copolymers using Raman spectroscopy",
      "volume": "27",
      "author": "Hu",
      "year": "1992",
      "journal-title": "J Mater Sci"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB13",
      "doi-asserted-by": "crossref",
      "first-page": "80",
      "DOI": "10.1016/0032-3861(94)90053-1",
      "article-title": "Strain measurement and deformation analysis in a diacetylene-containing urethane copolymer using Raman spectroscopy",
      "volume": "35",
      "author": "Hu",
      "year": "1994",
      "journal-title": "Polymer"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB14",
      "doi-asserted-by": "crossref",
      "first-page": "1589",
      "DOI": "10.1002/pol.1984.180220903",
      "article-title": "High modulus polydiacetylene single crystal fibres",
      "volume": "22",
      "author": "Galiotis",
      "year": "1984",
      "journal-title": "J Polym Sci, Polym Phys Ed"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB15",
      "unstructured": "Thongpin C. Development of diacetylene-containing urethane copolymers for strain measurement applications. PhD thesis. UMIST, 1998."
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB16",
      "doi-asserted-by": "crossref",
      "first-page": "72",
      "DOI": "10.1088/0508-3443/3/3/302",
      "article-title": "The elasticity and strength of paper and other fibrous materials",
      "volume": "3",
      "author": "Cox",
      "year": "1952",
      "journal-title": "Br J Appl Phys"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB17",
      "series-title": "Strong solids",
      "author": "Kelly",
      "year": "1986"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB18",
      "doi-asserted-by": "crossref",
      "first-page": "1137",
      "DOI": "10.1023/A:1004357121802",
      "article-title": "Definition and measurement of the shear-lag parameter, beta, as an index of the stress transfer efficiency in polymer composites",
      "volume": "33",
      "author": "Galiotis",
      "year": "1998",
      "journal-title": "J Mater Sci"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB19",
      "doi-asserted-by": "crossref",
      "first-page": "745",
      "DOI": "10.1016/0010-4361(94)90210-0",
      "article-title": "Analysis of the single-fibre pull-out test using Raman spectroscopy. Part I: pull-out of aramid fibres from an epoxy resin",
      "volume": "25",
      "author": "Andrews",
      "year": "1994",
      "journal-title": "Composites"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB20",
      "doi-asserted-by": "crossref",
      "first-page": "3893",
      "DOI": "10.1007/BF00352650",
      "article-title": "The interfacial properties of aramid/epoxy model composites",
      "volume": "31",
      "author": "Andrews",
      "year": "1996",
      "journal-title": "J Mater Sci"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB21",
      "doi-asserted-by": "crossref",
      "first-page": "63",
      "DOI": "10.1016/S0167-6636(97)00023-9",
      "article-title": "On the use of shear-lag methods for analysis of stress transfer in unidirectional composites",
      "volume": "26",
      "author": "Nairn",
      "year": "1997",
      "journal-title": "Mech Mater"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB22",
      "doi-asserted-by": "crossref",
      "first-page": "329",
      "DOI": "10.1016/0022-5096(65)90035-9",
      "article-title": "Tensile properties of fibre-reinforced metals: copper/tungsten and copper/molybdenum",
      "volume": "13",
      "author": "Kelly",
      "year": "1965",
      "journal-title": "J Mech Phys Sol"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB23",
      "doi-asserted-by": "crossref",
      "first-page": "989",
      "DOI": "10.1016/S1359-835X(98)00020-7",
      "article-title": "Evidence of dynamic effects in the fragmentation of optical fibres in epoxy",
      "volume": "29",
      "author": "Wagner",
      "year": "1998",
      "journal-title": "Composites A: Appl Sci Manufact"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB24",
      "doi-asserted-by": "crossref",
      "first-page": "2",
      "DOI": "10.1016/0010-4361(92)90282-Y",
      "article-title": "Comparison of methods for the measurement of fibre/matrix adhesion in composites",
      "volume": "23",
      "author": "Herrera-Franco",
      "year": "1992",
      "journal-title": "Composites"
    },
    {
      "key": "10.1016/S1359-835X(00)00091-9_BIB25",
      "doi-asserted-by": "crossref",
      "first-page": "925",
      "DOI": "10.1016/S0266-3538(97)00016-X",
      "article-title": "Measurement of the load-bearing capability of the fibre/matrix interface by single-fibre fragmentation",
      "volume": "57",
      "author": "Tripathi",
      "year": "1997",
      "journal-title": "Comp. Sci. Tech."
    }
  ],
  "container-title": "Composites Part A: Applied Science and Manufacturing",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://api.elsevier.com/content/article/PII:S1359835X00000919?httpAccept=text/xml",
      "content-type": "text/xml",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "https://api.elsevier.com/content/article/PII:S1359835X00000919?httpAccept=text/plain",
      "content-type": "text/plain",
      "content-version": "vor",
      "intended-application": "text-mining"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2021,
        5,
        9
      ]
    ],
    "date-time": "2021-05-09T12:03:42Z",
    "timestamp": 1620561822000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "https://linkinghub.elsevier.com/retrieve/pii/S1359835X00000919"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        2001,
        2
      ]
    ]
  },
  "references-count": 25,
  "journal-issue": {
    "issue": "2",
    "published-print": {
      "date-parts": [
        [
          2001,
          2
        ]
      ]
    }
  },
  "alternative-id": [
    "S1359835X00000919"
  ],
  "URL": "http://dx.doi.org/10.1016/S1359-835X(00)00091-9",
  "relation": {},
  "ISSN": [
    "1359-835X"
  ],
  "subject": [],
  "container-title-short": "Composites Part A: Applied Science and Manufacturing",
  "published": {
    "date-parts": [
      [
        2001,
        2
      ]
    ]
  }
}