DOI: 10.1016/s0890-6955(01)00041-4. New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V

New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V

10.1016/s0890-6955(01)00041-4

Crossref journal-article

Elsevier BV

International Journal of Machine Tools and Manufacture (78)

Bibliography

Hong, S. Y., Markus, I., & Jeong, W. (2001). New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V. International Journal of Machine Tools and Manufacture, 41(15), 2245â2260.

Authors 3

Shane Y Hong (first)
Irel Markus (additional)
Woo-cheol Jeong (additional)

References 29 Referenced 360

10.1243/PIME_PROC_1990_204_047_02 / Proc. Inst. Mech. Eng. / Machining of titanium and its alloys: a review by Machado (1990)
10.1016/S0007-8506(07)63272-7 / Ann. CIRP / Tool wear in titanium machining by Hartung (1982)
{'key': '10.1016/S0890-6955(01)00041-4_BIB3', 'series-title': 'Titanium, a Technical Guide', 'first-page': '163', 'author': 'Donachie', 'year': '1982'} / Titanium, a Technical Guide by Donachie (1982)
10.1016/0043-1648(81)90242-8 / Wear / New observation on the mechanism of chip formation when machining titanium alloys by Komanduri (1981)
{'key': '10.1016/S0890-6955(01)00041-4_BIB5', 'series-title': 'Ann. Trans. Technol. Conf.', 'first-page': '467', 'article-title': 'Effect of temperature on the lathe machining characteristics of Ti-6-4', 'author': 'Rennhack', 'year': '1974'} / Ann. Trans. Technol. Conf. / Effect of temperature on the lathe machining characteristics of Ti-6-4 by Rennhack (1974)
{'key': '10.1016/S0890-6955(01)00041-4_BIB6', 'first-page': '79', 'article-title': 'Northrop studies production techniques for titanium', 'volume': 'July', 'author': 'Reed', 'year': '1965', 'journal-title': 'Machinery (American)'} / Machinery (American) / Northrop studies production techniques for titanium by Reed (1965)
{'key': '10.1016/S0890-6955(01)00041-4_BIB7', 'first-page': '101', 'article-title': 'Cryogenic coolants speed titanium machining', 'volume': 'July', 'author': 'Grumman Aircraft Co', 'year': '1965', 'journal-title': 'Machinery (American)'} / Machinery (American) / Cryogenic coolants speed titanium machining by Grumman Aircraft Co (1965)
{'issue': '2', 'key': '10.1016/S0890-6955(01)00041-4_BIB8', 'first-page': '399', 'article-title': 'Face milling at −180°C', 'volume': '19', 'author': 'Filippi', 'year': '1971', 'journal-title': 'Ann. CIRP'} / Ann. CIRP / Face milling at −180°C by Filippi (1971)
{'key': '10.1016/S0890-6955(01)00041-4_BIB9', 'first-page': '409', 'article-title': 'Chip formation, surface roughness and cutting force in cryogenic machining', 'volume': '17', 'author': 'Uehara', 'year': '1968', 'journal-title': 'Ann. CIRP'} / Ann. CIRP / Chip formation, surface roughness and cutting force in cryogenic machining by Uehara (1968)
{'key': '10.1016/S0890-6955(01)00041-4_BIB10', 'first-page': '273', 'article-title': 'Characteristics of tool wear in cryogenic machining', 'volume': '19', 'author': 'Uehara', 'year': '1970', 'journal-title': 'Ann. CIRP'} / Ann. CIRP / Characteristics of tool wear in cryogenic machining by Uehara (1970)
10.1007/BF02834790 / J. Mater. Shaping Technol. / The effects of temperature on machining of metals by Dillon (1990)
{'key': '10.1016/S0890-6955(01)00041-4_BIB12', 'first-page': '3', 'article-title': 'Turning Ti-6Al-4V alloy with cryogenic cooling', 'volume': 'XXIV', 'author': 'Wang', 'year': '1996', 'journal-title': 'Trans. NAMRC'} / Trans. NAMRC / Turning Ti-6Al-4V alloy with cryogenic cooling by Wang (1996)
M. Murugappan, Cryogenic machining of advanced ceramics and titanium, MS thesis, University of Nebraska-Lincoln, 1996.
J.D. Christopher, The influence of high-pressure cryogenic coolant on tool life, Technical Paper No. MR90-249. SME, 1990.
10.1007/BF02649248 / J. Mater. Eng. Perform. / Cooling strategies for cryogenic machining from materials viewpoint by Hong (1992)
10.1007/BF02649252 / J. Mater. Eng. Perform. / Cryogenic properties of some cutting tool materials by Zhao (1992)
10.1016/S0890-6955(01)00026-8 / Int. J. Mach. Tools Manuf. / Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4V by Hong (2001)
10.1016/S0890-6955(01)00029-3 / Int. J. Mach. Tools Manuf. / Friction and cutting forces in cryogenic machining of Ti-6Al-4V by Hong (2001)
US National Bureau of Standards, Cryogenic Material Data Handbook, V1 and V2, Boulder, CO, 1978. (10.1016/0140-3664(78)90144-5)
{'key': '10.1016/S0890-6955(01)00041-4_BIB20', 'series-title': 'Materials at Low Temperatures', 'author': 'ASM', 'year': '1983'} / Materials at Low Temperatures by ASM (1983)
{'key': '10.1016/S0890-6955(01)00041-4_BIB21', 'series-title': 'Smithells Metals Reference Book', 'author': 'Smithells', 'year': '1998'} / Smithells Metals Reference Book by Smithells (1998)
10.1115/1.2830113 / J. Manuf. Sci. Eng. / Improvement of chip breaking in machining low carbon steel by cryogenically pre-cooling the workpiece by Ding (1998)
10.1016/S0007-8506(07)62056-3 / Ann. CIRP / Cryogenic diamond turning of stainless steel by Evans (1991)
{'key': '10.1016/S0890-6955(01)00041-4_BIB24', 'first-page': '133', 'article-title': 'Cryogenic machining of Kevlar composites', 'volume': 'vol. 27', 'author': 'Bhattacharayya', 'year': '1991'} / Cryogenic machining of Kevlar composites by Bhattacharayya (1991)
Hong, S., Cryogenic machining, US Patent No. 5,901,623, May 11, 1999. (10.1007/s100980050016)
ISO, Tool life testing with single-point turning tools, International Standard No. 3685, 2nd edn, 1993.
Machinability Data Center, in: Machining Data Handbook, 3rd ed., vol. 1, Metcut Associates Inc, Cincinnati, Ohio, 1980, pp. 1–39.
R.R. Lindeke, A.K. Khan, J. Haddad, Ultra-high pressure lubrication: cooling through the insert, in: Advanced Machining Technology III Conference, Chicago, IL, September 4–6, 1990.
10.1115/1.1315297 / J. Manuf. Sci. Eng. / Economical and ecological cryogenic machining by Hong (2001)

Dates

Type	When
Created	23 years, 1 month ago (July 25, 2002, 5:08 p.m.)
Deposited	4 years, 3 months ago (May 11, 2021, 7:33 p.m.)
Indexed	2 days, 18 hours ago (Aug. 31, 2025, 7:21 p.m.)
Issued	23 years, 9 months ago (Dec. 1, 2001)
Published	23 years, 9 months ago (Dec. 1, 2001)
Published Print	23 years, 9 months ago (Dec. 1, 2001)

Funders 0

None

BibTeX

@article{Hong_2001, title={New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V}, volume={41}, ISSN={0890-6955}, url={http://dx.doi.org/10.1016/s0890-6955(01)00041-4}, DOI={10.1016/s0890-6955(01)00041-4}, number={15}, journal={International Journal of Machine Tools and Manufacture}, publisher={Elsevier BV}, author={Hong, Shane Y and Markus, Irel and Jeong, Woo-cheol}, year={2001}, month=dec, pages={2245–2260} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2025,
        8,
        31
      ]
    ],
    "date-time": "2025-08-31T23:21:05Z",
    "timestamp": 1756682465717
  },
  "reference-count": 29,
  "publisher": "Elsevier BV",
  "issue": "15",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            2001,
            12,
            1
          ]
        ],
        "date-time": "2001-12-01T00:00:00Z",
        "timestamp": 1007164800000
      },
      "content-version": "tdm",
      "delay-in-days": 0,
      "URL": "https://www.elsevier.com/tdm/userlicense/1.0/"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        2001,
        12
      ]
    ]
  },
  "DOI": "10.1016/s0890-6955(01)00041-4",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2002,
        7,
        25
      ]
    ],
    "date-time": "2002-07-25T21:08:51Z",
    "timestamp": 1027631331000
  },
  "page": "2245-2260",
  "source": "Crossref",
  "is-referenced-by-count": 360,
  "title": "New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V",
  "prefix": "10.1016",
  "volume": "41",
  "author": [
    {
      "given": "Shane Y",
      "family": "Hong",
      "sequence": "first",
      "affiliation": []
    },
    {
      "given": "Irel",
      "family": "Markus",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "Woo-cheol",
      "family": "Jeong",
      "sequence": "additional",
      "affiliation": []
    }
  ],
  "member": "78",
  "reference": [
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB1",
      "doi-asserted-by": "crossref",
      "first-page": "53",
      "DOI": "10.1243/PIME_PROC_1990_204_047_02",
      "article-title": "Machining of titanium and its alloys: a review",
      "volume": "204",
      "author": "Machado",
      "year": "1990",
      "journal-title": "Proc. Inst. Mech. Eng."
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB2",
      "doi-asserted-by": "crossref",
      "first-page": "75",
      "DOI": "10.1016/S0007-8506(07)63272-7",
      "article-title": "Tool wear in titanium machining",
      "volume": "31",
      "author": "Hartung",
      "year": "1982",
      "journal-title": "Ann. CIRP"
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB3",
      "series-title": "Titanium, a Technical Guide",
      "first-page": "163",
      "author": "Donachie",
      "year": "1982"
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB4",
      "doi-asserted-by": "crossref",
      "first-page": "179",
      "DOI": "10.1016/0043-1648(81)90242-8",
      "article-title": "New observation on the mechanism of chip formation when machining titanium alloys",
      "volume": "69",
      "author": "Komanduri",
      "year": "1981",
      "journal-title": "Wear"
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB5",
      "series-title": "Ann. Trans. Technol. Conf.",
      "first-page": "467",
      "article-title": "Effect of temperature on the lathe machining characteristics of Ti-6-4",
      "author": "Rennhack",
      "year": "1974"
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB6",
      "first-page": "79",
      "article-title": "Northrop studies production techniques for titanium",
      "volume": "July",
      "author": "Reed",
      "year": "1965",
      "journal-title": "Machinery (American)"
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB7",
      "first-page": "101",
      "article-title": "Cryogenic coolants speed titanium machining",
      "volume": "July",
      "author": "Grumman Aircraft Co",
      "year": "1965",
      "journal-title": "Machinery (American)"
    },
    {
      "issue": "2",
      "key": "10.1016/S0890-6955(01)00041-4_BIB8",
      "first-page": "399",
      "article-title": "Face milling at \u2212180\u00b0C",
      "volume": "19",
      "author": "Filippi",
      "year": "1971",
      "journal-title": "Ann. CIRP"
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB9",
      "first-page": "409",
      "article-title": "Chip formation, surface roughness and cutting force in cryogenic machining",
      "volume": "17",
      "author": "Uehara",
      "year": "1968",
      "journal-title": "Ann. CIRP"
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB10",
      "first-page": "273",
      "article-title": "Characteristics of tool wear in cryogenic machining",
      "volume": "19",
      "author": "Uehara",
      "year": "1970",
      "journal-title": "Ann. CIRP"
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB11",
      "doi-asserted-by": "crossref",
      "first-page": "23",
      "DOI": "10.1007/BF02834790",
      "article-title": "The effects of temperature on machining of metals",
      "volume": "8",
      "author": "Dillon",
      "year": "1990",
      "journal-title": "J. Mater. Shaping Technol."
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB12",
      "first-page": "3",
      "article-title": "Turning Ti-6Al-4V alloy with cryogenic cooling",
      "volume": "XXIV",
      "author": "Wang",
      "year": "1996",
      "journal-title": "Trans. NAMRC"
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB13",
      "unstructured": "M. Murugappan, Cryogenic machining of advanced ceramics and titanium, MS thesis, University of Nebraska-Lincoln, 1996."
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB14",
      "unstructured": "J.D. Christopher, The influence of high-pressure cryogenic coolant on tool life, Technical Paper No. MR90-249. SME, 1990."
    },
    {
      "issue": "5",
      "key": "10.1016/S0890-6955(01)00041-4_BIB15",
      "doi-asserted-by": "crossref",
      "first-page": "669",
      "DOI": "10.1007/BF02649248",
      "article-title": "Cooling strategies for cryogenic machining from materials viewpoint",
      "volume": "1",
      "author": "Hong",
      "year": "1992",
      "journal-title": "J. Mater. Eng. Perform."
    },
    {
      "issue": "5",
      "key": "10.1016/S0890-6955(01)00041-4_BIB16",
      "doi-asserted-by": "crossref",
      "first-page": "705",
      "DOI": "10.1007/BF02649252",
      "article-title": "Cryogenic properties of some cutting tool materials",
      "volume": "1",
      "author": "Zhao",
      "year": "1992",
      "journal-title": "J. Mater. Eng. Perform."
    },
    {
      "issue": "10",
      "key": "10.1016/S0890-6955(01)00041-4_BIB17",
      "doi-asserted-by": "crossref",
      "first-page": "1417",
      "DOI": "10.1016/S0890-6955(01)00026-8",
      "article-title": "Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4V",
      "volume": "41",
      "author": "Hong",
      "year": "2001",
      "journal-title": "Int. J. Mach. Tools Manuf."
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB18",
      "doi-asserted-by": "crossref",
      "first-page": "2271",
      "DOI": "10.1016/S0890-6955(01)00029-3",
      "article-title": "Friction and cutting forces in cryogenic machining of Ti-6Al-4V",
      "volume": "41",
      "author": "Hong",
      "year": "2001",
      "journal-title": "Int. J. Mach. Tools Manuf."
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB19",
      "doi-asserted-by": "crossref",
      "unstructured": "US National Bureau of Standards, Cryogenic Material Data Handbook, V1 and V2, Boulder, CO, 1978.",
      "DOI": "10.1016/0140-3664(78)90144-5"
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB20",
      "series-title": "Materials at Low Temperatures",
      "author": "ASM",
      "year": "1983"
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB21",
      "series-title": "Smithells Metals Reference Book",
      "author": "Smithells",
      "year": "1998"
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB22",
      "doi-asserted-by": "crossref",
      "first-page": "76",
      "DOI": "10.1115/1.2830113",
      "article-title": "Improvement of chip breaking in machining low carbon steel by cryogenically pre-cooling the workpiece",
      "volume": "120",
      "author": "Ding",
      "year": "1998",
      "journal-title": "J. Manuf. Sci. Eng."
    },
    {
      "issue": "1",
      "key": "10.1016/S0890-6955(01)00041-4_BIB23",
      "doi-asserted-by": "crossref",
      "first-page": "571",
      "DOI": "10.1016/S0007-8506(07)62056-3",
      "article-title": "Cryogenic diamond turning of stainless steel",
      "volume": "40",
      "author": "Evans",
      "year": "1991",
      "journal-title": "Ann. CIRP"
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB24",
      "first-page": "133",
      "article-title": "Cryogenic machining of Kevlar composites",
      "volume": "vol. 27",
      "author": "Bhattacharayya",
      "year": "1991"
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB25",
      "doi-asserted-by": "crossref",
      "unstructured": "Hong, S., Cryogenic machining, US Patent No. 5,901,623, May 11, 1999.",
      "DOI": "10.1007/s100980050016"
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB26",
      "unstructured": "ISO, Tool life testing with single-point turning tools, International Standard No. 3685, 2nd edn, 1993."
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB27",
      "unstructured": "Machinability Data Center, in: Machining Data Handbook, 3rd ed., vol. 1, Metcut Associates Inc, Cincinnati, Ohio, 1980, pp. 1\u201339."
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB28",
      "unstructured": "R.R. Lindeke, A.K. Khan, J. Haddad, Ultra-high pressure lubrication: cooling through the insert, in: Advanced Machining Technology III Conference, Chicago, IL, September 4\u20136, 1990."
    },
    {
      "key": "10.1016/S0890-6955(01)00041-4_BIB29",
      "doi-asserted-by": "crossref",
      "DOI": "10.1115/1.1315297",
      "article-title": "Economical and ecological cryogenic machining",
      "volume": "123",
      "author": "Hong",
      "year": "2001",
      "journal-title": "J. Manuf. Sci. Eng."
    }
  ],
  "container-title": "International Journal of Machine Tools and Manufacture",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://api.elsevier.com/content/article/PII:S0890695501000414?httpAccept=text/xml",
      "content-type": "text/xml",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "https://api.elsevier.com/content/article/PII:S0890695501000414?httpAccept=text/plain",
      "content-type": "text/plain",
      "content-version": "vor",
      "intended-application": "text-mining"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2021,
        5,
        11
      ]
    ],
    "date-time": "2021-05-11T23:33:57Z",
    "timestamp": 1620776037000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "https://linkinghub.elsevier.com/retrieve/pii/S0890695501000414"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        2001,
        12
      ]
    ]
  },
  "references-count": 29,
  "journal-issue": {
    "issue": "15",
    "published-print": {
      "date-parts": [
        [
          2001,
          12
        ]
      ]
    }
  },
  "alternative-id": [
    "S0890695501000414"
  ],
  "URL": "http://dx.doi.org/10.1016/S0890-6955(01)00041-4",
  "relation": {},
  "ISSN": [
    "0890-6955"
  ],
  "subject": [],
  "container-title-short": "International Journal of Machine Tools and Manufacture",
  "published": {
    "date-parts": [
      [
        2001,
        12
      ]
    ]
  }
}