DOI: 10.1016/s0043-1648(00)00488-9. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour

On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour

10.1016/s0043-1648(00)00488-9

Crossref journal-article

Elsevier BV

Wear (78)

Bibliography

Leyland, A., & Matthews, A. (2000). On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour. Wear, 246(1â2), 1â11.

Authors 2

A Leyland (first)
A Matthews (additional)

References 64 Referenced 2,631

10.1063/1.1721448 / J. Appl. Phys. / Contact and rubbing of flat surfaces by Archard (1953)
{'key': '10.1016/S0043-1648(00)00488-9_BIB2', 'first-page': '438', 'article-title': 'Properties influencing wear of metals', 'volume': '3', 'author': 'Oberle', 'year': '1951', 'journal-title': 'J. Metals'} / J. Metals / Properties influencing wear of metals by Oberle (1951)
10.1016/0043-1648(68)90175-0 / Wear / The wear of metals by relatively soft abrasives by Richardson (1968)
10.1088/0508-3443/14/8/311 / Br. J. Appl. Phys. / The relationship between the wear of carbon brush materials and their elastic moduli by Lancaster (1963)
R.T. Spurr, T.P. Newcombe, The friction and wear of various materials sliding against unlubricated surfaces of different types and degrees of roughness, in: Proceedings of the Conference on Lubrication and Wear Institution of Mechanical Engineers, London, UK, 1957, Inst. Mech. Eng. (1957) 269.
{'issue': '2', 'key': '10.1016/S0043-1648(00)00488-9_BIB6', 'first-page': '15', 'article-title': 'Surface films in tribology', 'volume': '1', 'author': 'Halling', 'year': '1982', 'journal-title': 'Tribologia'} / Tribologia / Surface films in tribology by Halling (1982)
A. Matthews, The value of deposition processes for industrial tools, in: Proceedings of the 1st Conference on Materials Engineering, The University of Leeds, UK, July 1984, Institution of Metallurgists, 1984 p. 175, ISBN: 0-901-46224-1.
10.1016/S0257-8972(99)00490-9 / Surf. Coat. Technol. / Structure, hardness and mechanical properties of magnetron-sputtered titanium–aluminium boride films by Rebholz (1999)
10.1103/PhysRevB.2.547 / Phys. Rev. / Attempt to design a strong solid by Koehler (1970)
10.1063/1.324518 / J. Appl. Phys. / Strength enhancement in thin-layered Al-Cu laminates by Lehoczy (1978)
10.1103/PhysRevLett.41.1814 / Phys. Rev. Lett. / Retardation of dislocation generation and motion in thin-layered metal laminates by Lehoczy (1978)
10.1016/0257-8972(91)90114-C / Surf. Coat. Technol. / Microstructure and wear behaviour of metal-containing diamond-like coatings by Dimigen (1991)
10.1016/0257-8972(93)90217-C / Surf. Coat. Technol. / Preparation of W-C-H coatings by reactive magnetron sputtering by Bewilogua (1993)
10.1116/1.578030 / J. Vasc. Sci. Technol. / Deposition and properties of polycrystalline TiN/NbN superlattice coatings by Chu (1992)
10.1126/science.273.5277.889 / Science / New routes in the preparation of mechanically hard films by Sproul (1996)
10.1016/0257-8972(95)02595-2 / Surf. Coat. Technol. / Investigation of superlattice coatings deposited by a combined steered-arc evaporation and unbalanced magnetron sputtering technique by Donohue (1995)
10.1016/S0257-8972(97)00028-5 / Surf. Coat. Technol. / Large-scale fabrication of hard superlattice thin films by combined steered-arc evaporation and unbalanced magnetron sputtering by Donohue (1997)
10.1116/1.573700 / J. Vasc. Sci. Technol. / Material selection for hard coatings by Holleck (1986)
10.1016/0257-8972(88)90011-4 / Surf. Coat. Technol. / Preparation and behaviour of wear-resistant TiC/TiB2, TiN/TiB2 and TiC/TiN coatings with high amounts of phase boundaries by Holleck (1988)
10.1016/0257-8972(90)90146-4 / Surf. Coat. Technol. / Sputter deposition of ultrahard coatings within the system Ti-B-C-N by Mitterer (1990)
10.1016/0921-5093(91)90484-5 / Mater. Sci. Eng. A / Evaluation of some new titanium-based ceramic coatings in tribological model wear and metal cutting tests by Ronkainen (1991)
10.1016/0257-8972(91)90102-3 / Surf. Coat. Technol. / Evaluation of some titanium-based ceramic coatings on high speed steel cutting tools by Ronkainen (1992)
10.1016/0257-8972(94)90217-8 / Surf. Coat. Technol. / Structure and properties of Ti-B-N coatings by Gissler (1994)
10.1016/S0257-8972(97)00279-X / Surf. Coat. Technol. / Conventional and new approaches towards the design of novel superhard materials by Veprek (1997)
10.1016/S0040-6090(97)00665-2 / Thin Solid Films / New development in superhard coatings: the superhard nanocrystalline–amorphous composites by Veprek (1998)
10.1016/S0257-8972(99)00065-1 / Surf. Coat. Technol. / Nanocrystalline and nanocomposite CrCu and CrCu-N films prepared by magnetron sputtering by Musil (1999)
10.1016/S0257-8972(99)00482-X / Surf. Coat. Technol. / ZrN/Cu nanocomposite film — a novel superhard material by Musil (1999)
10.1016/0036-9748(89)90342-6 / Scripta Metallurgica / On the validity of the Hall–Petch relationship in nanocrystalline materials by Chokshi (1989)
10.1557/JMR.1992.2114 / J. Mater. Res. / Grain-size effects in nanocrystalline materials by Suryanarayana (1992)
10.1016/0965-9773(95)00044-5 / Nanostruct. Mater. / Mechanical properties of nanophase metals by Siegel (1995)
10.1016/S0965-9773(98)00145-7 / Nanostruct. Mater. / On the ‘anomalous’ hardness of nanocrystalline materials by Konstantinidis (1998)
10.1016/0301-679X(95)98963-E / Tribol. Int. / Film-substrate interface stresses and their role in the tribological performance of surface coatings by Ramalingam (1995)
10.1016/0257-8972(95)02618-5 / Surf. Coat. Technol. / Multi-layer and composite structures for advanced coatings by Ramalingam (1996)
10.1557/PROC-383-447 / Mater. Res. Soc. Symp. Proc. / Nanoindentation and nanoscratching of hard carbon coatings for magnetic disks by Tsui (1995)
10.1016/S0921-5093(98)00724-2 / Mater. Sci. Eng. A / Measurement of mechanical properties by ultra-low load indentation by Pharr (1998)
10.1557/JMR.1999.0042 / J. Mater. Res. / Substrate effects on nanoindentation mechanical property measurement of soft films on hard substrates by Tsui (1999)
K.L. Johnson, Contact Mechanics, Cambridge University Press, London, UK, 1985, ISBN: 0-521-34796-3. (10.1017/CBO9781139171731)
D. Tabor, The Hardness of Metals, Oxford University Press, London, UK, 1951, ISBN: 0-521-29183-6.
10.1111/j.1151-2916.1980.tb10768.x / J. Am. Ceram. Soc. / Elastic/plastic indentation damage in ceramics: the median/radial crack system by Lawn (1980)
J.C. Anderson, K.D. Leaver, R.D. Rawlings, J.M. Alexander, Materials Science, Van Nostrand Reinhold, Wokingham, UK, 1985, ISBN: 0-442-30626-1.
P. Haasen, Physical Metallurgy, Cambridge University Press, London, UK, 1978, ISBN: 0-521-29183-6.
10.1016/S0042-207X(98)00059-1 / Vacuum / Nanocrystalline hard coatings within the quasi-binary system TiN-TiB2 by Mitterer (1998)
10.1116/1.581431 / J. Vasc. Sci. Technol. A / Structure, mechanical and tribological properties of Ti-B-N and Ti-Al-B-N thin films produced by electron beam evaporation by Rebholz (1998)
10.1016/S0257-8972(98)00840-8 / Surf. Coat. Technol. / Structure, mechanical and tribological properties of sputtered TiAlBN thin films by Rebholz (1999)
10.1016/S0040-6090(98)01635-6 / Thin Solid Films / Deposition and characterisation of TiAlBN coatings produced by direct electron-beam evaporation of Ti and Ti-Al-B-N material from a twin crucible source by Rebholz (1999)
10.1016/S0257-8972(99)00260-1 / Surf. Coat. Technol. / The effect of boron additions on the tribological behaviour of TiN coatings produced by electron-beam evaporative PVD by Rebholz (1999)
C. Rebholz, A. Leyland, D. Schneider, B. Schultrich, C. Charitidis, S. Logothetidis, A. Matthews, Correlation of hardness, elastic modulus and density measurements by nanoindentation and ultrasonic surface acoustic wave techniques on magnetron sputtered TiAlBN coatings, Thin Solid Films, in press.
10.1016/S0257-8972(98)00786-5 / Surf. Coat. Technol. / Wear behaviour of carbon-containing tungsten coatings prepared by reactive magnetron sputtering by Rebholz (1999)
10.1016/S0257-8972(99)00240-6 / Surf. Coat. Technol. / Structure, mechanical and tribological properties of nitrogen-containing chromium coatings prepared by reactive magnetron sputtering by Rebholz (1999)
10.1016/0257-8972(94)90159-7 / Surf. Coat. Technol. / Titanium boron nitride coatings of very high hardness by Hammer (1994)
C. Rebholz, Synthesis and properties of titanium aluminium boron nitride coatings, Ph.D. thesis, The University of Hull, 1999. (10.1016/S0257-8972(99)00490-9)
C.F. Lewis (Ed.), Materials Selector 1991, Penton Publishing Inc., Cleveland OH, USA, 1990, Mater. Eng. (December) (1990) 98–99, ISSN: 0025-5319.
{'issue': '1', 'key': '10.1016/S0043-1648(00)00488-9_BIB53', 'first-page': '65', 'article-title': 'Determination of true Knoop hardness', 'volume': '157', 'author': 'Neumann', 'year': '2000', 'journal-title': 'Adv. Mater. Processes'} / Adv. Mater. Processes / Determination of true Knoop hardness by Neumann (2000)
10.1016/0043-1648(84)90031-0 / Wear / The least wear by Rabinowicz (1984)
M.C. Joseph, C. Rebholz, A. Leyland, A. Matthews, Structure, hardness and wear behaviour of nitrogen-containing chromium–copper coatings, in preparation.
10.1557/JMR.1998.0401 / J. Mater. Res. / Mechanical properties from instrumented indentation: uncertainties due to tip shape correction by Seitzmann (1998)
10.1116/1.581977 / J. Vasc. Sci. Technol. A / The search for novel superhard materials by Veprek (1999)
10.1016/S0257-8972(99)00451-X / Surf. Coat. Technol. / Structural properties internal stress and thermal stability of nc-TiN/a-Si3N4 nc-TiN/TiSix and nc-(Ti1−yAlySix)N superhard nanocomposite coatings reaching the hardness of diamond by Niederhofer (1999)
10.1016/S0040-6090(99)00552-0 / Thin Solid Films / Microstructure of CrN coatings produced by PVD techniques by Cunha (1999)
10.1016/0040-6090(95)06921-6 / Thin Solid Films / A method for elastic modulus measurements of magnetron sputtered thin films dedicated to mechanical applications by Rouzaud (1995)
10.1016/S0040-6090(98)01056-6 / Thin Solid films / Mechanical properties of W and W(C) thin films: Young’s modulus fracture toughness and adhesion by Harry (1998)
K. Holmberg, A. Matthews, Elsevier Tribology Series 28 D, in: Dowson (Ed.), Coatings Tribology: Properties Techniques and Applications in Surface Engineering, Elsevier, Amsterdam, 1994, ISBN: 0-444-88870-5.
10.1016/S0257-8972(97)00578-1 / Surf. Coat. Technol. / Design aspects for advanced tribological surface coatings by Matthews (1998)
A. Matthews, A. Leyland, Developments in PVD tribological coatings, in: Proceedings of the 5th ASM Heat Treatment and Surface Engineering Conference in Europe, Gothenburg, Sweden, UK, 7–9 June 2000, ASM Int., Materials Park, OH, USA, 2000.

Dates

Type	When
Created	23 years, 1 month ago (July 25, 2002, 7:41 a.m.)
Deposited	6 years, 3 months ago (May 1, 2019, 9:58 a.m.)
Indexed	1 day, 13 hours ago (Aug. 23, 2025, 9:37 p.m.)
Issued	24 years, 9 months ago (Nov. 1, 2000)
Published	24 years, 9 months ago (Nov. 1, 2000)
Published Print	24 years, 9 months ago (Nov. 1, 2000)

Funders 0

None

BibTeX

@article{Leyland_2000, title={On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour}, volume={246}, ISSN={0043-1648}, url={http://dx.doi.org/10.1016/s0043-1648(00)00488-9}, DOI={10.1016/s0043-1648(00)00488-9}, number={1–2}, journal={Wear}, publisher={Elsevier BV}, author={Leyland, A and Matthews, A}, year={2000}, month=nov, pages={1–11} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2025,
        8,
        24
      ]
    ],
    "date-time": "2025-08-24T01:37:41Z",
    "timestamp": 1755999461413
  },
  "reference-count": 64,
  "publisher": "Elsevier BV",
  "issue": "1-2",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            2000,
            11,
            1
          ]
        ],
        "date-time": "2000-11-01T00:00:00Z",
        "timestamp": 973036800000
      },
      "content-version": "tdm",
      "delay-in-days": 0,
      "URL": "https://www.elsevier.com/tdm/userlicense/1.0/"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        2000,
        11
      ]
    ]
  },
  "DOI": "10.1016/s0043-1648(00)00488-9",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2002,
        7,
        25
      ]
    ],
    "date-time": "2002-07-25T11:41:15Z",
    "timestamp": 1027597275000
  },
  "page": "1-11",
  "source": "Crossref",
  "is-referenced-by-count": 2631,
  "title": "On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour",
  "prefix": "10.1016",
  "volume": "246",
  "author": [
    {
      "given": "A",
      "family": "Leyland",
      "sequence": "first",
      "affiliation": []
    },
    {
      "given": "A",
      "family": "Matthews",
      "sequence": "additional",
      "affiliation": []
    }
  ],
  "member": "78",
  "reference": [
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB1",
      "doi-asserted-by": "crossref",
      "first-page": "981",
      "DOI": "10.1063/1.1721448",
      "article-title": "Contact and rubbing of flat surfaces",
      "volume": "24",
      "author": "Archard",
      "year": "1953",
      "journal-title": "J. Appl. Phys."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB2",
      "first-page": "438",
      "article-title": "Properties influencing wear of metals",
      "volume": "3",
      "author": "Oberle",
      "year": "1951",
      "journal-title": "J. Metals"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB3",
      "doi-asserted-by": "crossref",
      "first-page": "245",
      "DOI": "10.1016/0043-1648(68)90175-0",
      "article-title": "The wear of metals by relatively soft abrasives",
      "volume": "11",
      "author": "Richardson",
      "year": "1968",
      "journal-title": "Wear"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB4",
      "doi-asserted-by": "crossref",
      "first-page": "497",
      "DOI": "10.1088/0508-3443/14/8/311",
      "article-title": "The relationship between the wear of carbon brush materials and their elastic moduli",
      "volume": "14",
      "author": "Lancaster",
      "year": "1963",
      "journal-title": "Br. J. Appl. Phys."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB5",
      "unstructured": "R.T. Spurr, T.P. Newcombe, The friction and wear of various materials sliding against unlubricated surfaces of different types and degrees of roughness, in: Proceedings of the Conference on Lubrication and Wear Institution of Mechanical Engineers, London, UK, 1957, Inst. Mech. Eng. (1957) 269."
    },
    {
      "issue": "2",
      "key": "10.1016/S0043-1648(00)00488-9_BIB6",
      "first-page": "15",
      "article-title": "Surface films in tribology",
      "volume": "1",
      "author": "Halling",
      "year": "1982",
      "journal-title": "Tribologia"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB7",
      "unstructured": "A. Matthews, The value of deposition processes for industrial tools, in: Proceedings of the 1st Conference on Materials Engineering, The University of Leeds, UK, July 1984, Institution of Metallurgists, 1984 p. 175, ISBN: 0-901-46224-1."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB8",
      "doi-asserted-by": "crossref",
      "first-page": "412",
      "DOI": "10.1016/S0257-8972(99)00490-9",
      "article-title": "Structure, hardness and mechanical properties of magnetron-sputtered titanium\u2013aluminium boride films",
      "volume": "120-121",
      "author": "Rebholz",
      "year": "1999",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB9",
      "doi-asserted-by": "crossref",
      "first-page": "547",
      "DOI": "10.1103/PhysRevB.2.547",
      "article-title": "Attempt to design a strong solid",
      "volume": "B2",
      "author": "Koehler",
      "year": "1970",
      "journal-title": "Phys. Rev."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB10",
      "doi-asserted-by": "crossref",
      "first-page": "5479",
      "DOI": "10.1063/1.324518",
      "article-title": "Strength enhancement in thin-layered Al-Cu laminates",
      "volume": "49",
      "author": "Lehoczy",
      "year": "1978",
      "journal-title": "J. Appl. Phys."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB11",
      "doi-asserted-by": "crossref",
      "first-page": "1814",
      "DOI": "10.1103/PhysRevLett.41.1814",
      "article-title": "Retardation of dislocation generation and motion in thin-layered metal laminates",
      "volume": "41",
      "author": "Lehoczy",
      "year": "1978",
      "journal-title": "Phys. Rev. Lett."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB12",
      "doi-asserted-by": "crossref",
      "first-page": "543",
      "DOI": "10.1016/0257-8972(91)90114-C",
      "article-title": "Microstructure and wear behaviour of metal-containing diamond-like coatings",
      "volume": "49",
      "author": "Dimigen",
      "year": "1991",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB13",
      "doi-asserted-by": "crossref",
      "first-page": "144",
      "DOI": "10.1016/0257-8972(93)90217-C",
      "article-title": "Preparation of W-C-H coatings by reactive magnetron sputtering",
      "volume": "61",
      "author": "Bewilogua",
      "year": "1993",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "issue": "4",
      "key": "10.1016/S0043-1648(00)00488-9_BIB14",
      "doi-asserted-by": "crossref",
      "first-page": "1604",
      "DOI": "10.1116/1.578030",
      "article-title": "Deposition and properties of polycrystalline TiN/NbN superlattice coatings",
      "volume": "A10",
      "author": "Chu",
      "year": "1992",
      "journal-title": "J. Vasc. Sci. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB15",
      "doi-asserted-by": "crossref",
      "first-page": "889",
      "DOI": "10.1126/science.273.5277.889",
      "article-title": "New routes in the preparation of mechanically hard films",
      "volume": "273",
      "author": "Sproul",
      "year": "1996",
      "journal-title": "Science"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB16",
      "doi-asserted-by": "crossref",
      "first-page": "149",
      "DOI": "10.1016/0257-8972(95)02595-2",
      "article-title": "Investigation of superlattice coatings deposited by a combined steered-arc evaporation and unbalanced magnetron sputtering technique",
      "volume": "76",
      "author": "Donohue",
      "year": "1995",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB17",
      "doi-asserted-by": "crossref",
      "first-page": "69",
      "DOI": "10.1016/S0257-8972(97)00028-5",
      "article-title": "Large-scale fabrication of hard superlattice thin films by combined steered-arc evaporation and unbalanced magnetron sputtering",
      "volume": "93",
      "author": "Donohue",
      "year": "1997",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "issue": "6",
      "key": "10.1016/S0043-1648(00)00488-9_BIB18",
      "doi-asserted-by": "crossref",
      "first-page": "2661",
      "DOI": "10.1116/1.573700",
      "article-title": "Material selection for hard coatings",
      "volume": "A4",
      "author": "Holleck",
      "year": "1986",
      "journal-title": "J. Vasc. Sci. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB19",
      "doi-asserted-by": "crossref",
      "first-page": "707",
      "DOI": "10.1016/0257-8972(88)90011-4",
      "article-title": "Preparation and behaviour of wear-resistant TiC/TiB2, TiN/TiB2 and TiC/TiN coatings with high amounts of phase boundaries",
      "volume": "36",
      "author": "Holleck",
      "year": "1988",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB20",
      "doi-asserted-by": "crossref",
      "first-page": "351",
      "DOI": "10.1016/0257-8972(90)90146-4",
      "article-title": "Sputter deposition of ultrahard coatings within the system Ti-B-C-N",
      "volume": "41",
      "author": "Mitterer",
      "year": "1990",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB21",
      "doi-asserted-by": "crossref",
      "first-page": "602",
      "DOI": "10.1016/0921-5093(91)90484-5",
      "article-title": "Evaluation of some new titanium-based ceramic coatings in tribological model wear and metal cutting tests",
      "volume": "140",
      "author": "Ronkainen",
      "year": "1991",
      "journal-title": "Mater. Sci. Eng. A"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB22",
      "doi-asserted-by": "crossref",
      "first-page": "468",
      "DOI": "10.1016/0257-8972(91)90102-3",
      "article-title": "Evaluation of some titanium-based ceramic coatings on high speed steel cutting tools",
      "volume": "49",
      "author": "Ronkainen",
      "year": "1992",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB23",
      "doi-asserted-by": "crossref",
      "first-page": "556",
      "DOI": "10.1016/0257-8972(94)90217-8",
      "article-title": "Structure and properties of Ti-B-N coatings",
      "volume": "68",
      "author": "Gissler",
      "year": "1994",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB24",
      "doi-asserted-by": "crossref",
      "first-page": "15",
      "DOI": "10.1016/S0257-8972(97)00279-X",
      "article-title": "Conventional and new approaches towards the design of novel superhard materials",
      "volume": "97",
      "author": "Veprek",
      "year": "1997",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB25",
      "doi-asserted-by": "crossref",
      "first-page": "449",
      "DOI": "10.1016/S0040-6090(97)00665-2",
      "article-title": "New development in superhard coatings: the superhard nanocrystalline\u2013amorphous composites",
      "volume": "317",
      "author": "Veprek",
      "year": "1998",
      "journal-title": "Thin Solid Films"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB26",
      "doi-asserted-by": "crossref",
      "first-page": "32",
      "DOI": "10.1016/S0257-8972(99)00065-1",
      "article-title": "Nanocrystalline and nanocomposite CrCu and CrCu-N films prepared by magnetron sputtering",
      "volume": "115",
      "author": "Musil",
      "year": "1999",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB27",
      "doi-asserted-by": "crossref",
      "first-page": "179",
      "DOI": "10.1016/S0257-8972(99)00482-X",
      "article-title": "ZrN/Cu nanocomposite film \u2014 a novel superhard material",
      "volume": "120-121",
      "author": "Musil",
      "year": "1999",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB28",
      "doi-asserted-by": "crossref",
      "first-page": "1679",
      "DOI": "10.1016/0036-9748(89)90342-6",
      "article-title": "On the validity of the Hall\u2013Petch relationship in nanocrystalline materials",
      "volume": "23",
      "author": "Chokshi",
      "year": "1989",
      "journal-title": "Scripta Metallurgica"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB29",
      "doi-asserted-by": "crossref",
      "first-page": "2114",
      "DOI": "10.1557/JMR.1992.2114",
      "article-title": "Grain-size effects in nanocrystalline materials",
      "volume": "7",
      "author": "Suryanarayana",
      "year": "1992",
      "journal-title": "J. Mater. Res."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB30",
      "doi-asserted-by": "crossref",
      "first-page": "205",
      "DOI": "10.1016/0965-9773(95)00044-5",
      "article-title": "Mechanical properties of nanophase metals",
      "volume": "6",
      "author": "Siegel",
      "year": "1995",
      "journal-title": "Nanostruct. Mater."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB31",
      "doi-asserted-by": "crossref",
      "first-page": "1111",
      "DOI": "10.1016/S0965-9773(98)00145-7",
      "article-title": "On the \u2018anomalous\u2019 hardness of nanocrystalline materials",
      "volume": "10",
      "author": "Konstantinidis",
      "year": "1998",
      "journal-title": "Nanostruct. Mater."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB32",
      "doi-asserted-by": "crossref",
      "first-page": "145",
      "DOI": "10.1016/0301-679X(95)98963-E",
      "article-title": "Film-substrate interface stresses and their role in the tribological performance of surface coatings",
      "volume": "28",
      "author": "Ramalingam",
      "year": "1995",
      "journal-title": "Tribol. Int."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB33",
      "doi-asserted-by": "crossref",
      "first-page": "52",
      "DOI": "10.1016/0257-8972(95)02618-5",
      "article-title": "Multi-layer and composite structures for advanced coatings",
      "volume": "81",
      "author": "Ramalingam",
      "year": "1996",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB34",
      "doi-asserted-by": "crossref",
      "first-page": "447",
      "DOI": "10.1557/PROC-383-447",
      "article-title": "Nanoindentation and nanoscratching of hard carbon coatings for magnetic disks",
      "volume": "383",
      "author": "Tsui",
      "year": "1995",
      "journal-title": "Mater. Res. Soc. Symp. Proc."
    },
    {
      "issue": "1/2",
      "key": "10.1016/S0043-1648(00)00488-9_BIB35",
      "doi-asserted-by": "crossref",
      "first-page": "151",
      "DOI": "10.1016/S0921-5093(98)00724-2",
      "article-title": "Measurement of mechanical properties by ultra-low load indentation",
      "volume": "253",
      "author": "Pharr",
      "year": "1998",
      "journal-title": "Mater. Sci. Eng. A"
    },
    {
      "issue": "1",
      "key": "10.1016/S0043-1648(00)00488-9_BIB36",
      "doi-asserted-by": "crossref",
      "first-page": "292",
      "DOI": "10.1557/JMR.1999.0042",
      "article-title": "Substrate effects on nanoindentation mechanical property measurement of soft films on hard substrates",
      "volume": "14",
      "author": "Tsui",
      "year": "1999",
      "journal-title": "J. Mater. Res."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB37",
      "doi-asserted-by": "crossref",
      "unstructured": "K.L. Johnson, Contact Mechanics, Cambridge University Press, London, UK, 1985, ISBN: 0-521-34796-3.",
      "DOI": "10.1017/CBO9781139171731"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB38",
      "unstructured": "D. Tabor, The Hardness of Metals, Oxford University Press, London, UK, 1951, ISBN: 0-521-29183-6."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB39",
      "doi-asserted-by": "crossref",
      "first-page": "574",
      "DOI": "10.1111/j.1151-2916.1980.tb10768.x",
      "article-title": "Elastic/plastic indentation damage in ceramics: the median/radial crack system",
      "volume": "63",
      "author": "Lawn",
      "year": "1980",
      "journal-title": "J. Am. Ceram. Soc."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB40",
      "unstructured": "J.C. Anderson, K.D. Leaver, R.D. Rawlings, J.M. Alexander, Materials Science, Van Nostrand Reinhold, Wokingham, UK, 1985, ISBN: 0-442-30626-1."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB41",
      "unstructured": "P. Haasen, Physical Metallurgy, Cambridge University Press, London, UK, 1978, ISBN: 0-521-29183-6."
    },
    {
      "issue": "3/4",
      "key": "10.1016/S0043-1648(00)00488-9_BIB42",
      "doi-asserted-by": "crossref",
      "first-page": "313",
      "DOI": "10.1016/S0042-207X(98)00059-1",
      "article-title": "Nanocrystalline hard coatings within the quasi-binary system TiN-TiB2",
      "volume": "50",
      "author": "Mitterer",
      "year": "1998",
      "journal-title": "Vacuum"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB43",
      "doi-asserted-by": "crossref",
      "first-page": "2851",
      "DOI": "10.1116/1.581431",
      "article-title": "Structure, mechanical and tribological properties of Ti-B-N and Ti-Al-B-N thin films produced by electron beam evaporation",
      "volume": "16/5",
      "author": "Rebholz",
      "year": "1998",
      "journal-title": "J. Vasc. Sci. Technol. A"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB44",
      "doi-asserted-by": "crossref",
      "first-page": "126",
      "DOI": "10.1016/S0257-8972(98)00840-8",
      "article-title": "Structure, mechanical and tribological properties of sputtered TiAlBN thin films",
      "volume": "113",
      "author": "Rebholz",
      "year": "1999",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB45",
      "doi-asserted-by": "crossref",
      "first-page": "242",
      "DOI": "10.1016/S0040-6090(98)01635-6",
      "article-title": "Deposition and characterisation of TiAlBN coatings produced by direct electron-beam evaporation of Ti and Ti-Al-B-N material from a twin crucible source",
      "volume": "343-344",
      "author": "Rebholz",
      "year": "1999",
      "journal-title": "Thin Solid Films"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB46",
      "doi-asserted-by": "crossref",
      "first-page": "648",
      "DOI": "10.1016/S0257-8972(99)00260-1",
      "article-title": "The effect of boron additions on the tribological behaviour of TiN coatings produced by electron-beam evaporative PVD",
      "volume": "116-119",
      "author": "Rebholz",
      "year": "1999",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB47",
      "unstructured": "C. Rebholz, A. Leyland, D. Schneider, B. Schultrich, C. Charitidis, S. Logothetidis, A. Matthews, Correlation of hardness, elastic modulus and density measurements by nanoindentation and ultrasonic surface acoustic wave techniques on magnetron sputtered TiAlBN coatings, Thin Solid Films, in press."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB48",
      "doi-asserted-by": "crossref",
      "first-page": "85",
      "DOI": "10.1016/S0257-8972(98)00786-5",
      "article-title": "Wear behaviour of carbon-containing tungsten coatings prepared by reactive magnetron sputtering",
      "volume": "112",
      "author": "Rebholz",
      "year": "1999",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB49",
      "doi-asserted-by": "crossref",
      "first-page": "222",
      "DOI": "10.1016/S0257-8972(99)00240-6",
      "article-title": "Structure, mechanical and tribological properties of nitrogen-containing chromium coatings prepared by reactive magnetron sputtering",
      "volume": "115",
      "author": "Rebholz",
      "year": "1999",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB50",
      "doi-asserted-by": "crossref",
      "first-page": "194",
      "DOI": "10.1016/0257-8972(94)90159-7",
      "article-title": "Titanium boron nitride coatings of very high hardness",
      "volume": "68/69",
      "author": "Hammer",
      "year": "1994",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB51",
      "doi-asserted-by": "crossref",
      "unstructured": "C. Rebholz, Synthesis and properties of titanium aluminium boron nitride coatings, Ph.D. thesis, The University of Hull, 1999.",
      "DOI": "10.1016/S0257-8972(99)00490-9"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB52",
      "unstructured": "C.F. Lewis (Ed.), Materials Selector 1991, Penton Publishing Inc., Cleveland OH, USA, 1990, Mater. Eng. (December) (1990) 98\u201399, ISSN: 0025-5319."
    },
    {
      "issue": "1",
      "key": "10.1016/S0043-1648(00)00488-9_BIB53",
      "first-page": "65",
      "article-title": "Determination of true Knoop hardness",
      "volume": "157",
      "author": "Neumann",
      "year": "2000",
      "journal-title": "Adv. Mater. Processes"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB54",
      "doi-asserted-by": "crossref",
      "first-page": "533",
      "DOI": "10.1016/0043-1648(84)90031-0",
      "article-title": "The least wear",
      "volume": "100",
      "author": "Rabinowicz",
      "year": "1984",
      "journal-title": "Wear"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB55",
      "unstructured": "M.C. Joseph, C. Rebholz, A. Leyland, A. Matthews, Structure, hardness and wear behaviour of nitrogen-containing chromium\u2013copper coatings, in preparation."
    },
    {
      "issue": "10",
      "key": "10.1016/S0043-1648(00)00488-9_BIB56",
      "doi-asserted-by": "crossref",
      "first-page": "2936",
      "DOI": "10.1557/JMR.1998.0401",
      "article-title": "Mechanical properties from instrumented indentation: uncertainties due to tip shape correction",
      "volume": "13",
      "author": "Seitzmann",
      "year": "1998",
      "journal-title": "J. Mater. Res."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB57",
      "doi-asserted-by": "crossref",
      "first-page": "2401",
      "DOI": "10.1116/1.581977",
      "article-title": "The search for novel superhard materials",
      "volume": "17/5",
      "author": "Veprek",
      "year": "1999",
      "journal-title": "J. Vasc. Sci. Technol. A"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB58",
      "doi-asserted-by": "crossref",
      "first-page": "173",
      "DOI": "10.1016/S0257-8972(99)00451-X",
      "article-title": "Structural properties internal stress and thermal stability of nc-TiN/a-Si3N4 nc-TiN/TiSix and nc-(Ti1\u2212yAlySix)N superhard nanocomposite coatings reaching the hardness of diamond",
      "volume": "120-121",
      "author": "Niederhofer",
      "year": "1999",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB59",
      "doi-asserted-by": "crossref",
      "first-page": "465",
      "DOI": "10.1016/S0040-6090(99)00552-0",
      "article-title": "Microstructure of CrN coatings produced by PVD techniques",
      "volume": "355-356",
      "author": "Cunha",
      "year": "1999",
      "journal-title": "Thin Solid Films"
    },
    {
      "issue": "1/2",
      "key": "10.1016/S0043-1648(00)00488-9_BIB60",
      "doi-asserted-by": "crossref",
      "first-page": "270",
      "DOI": "10.1016/0040-6090(95)06921-6",
      "article-title": "A method for elastic modulus measurements of magnetron sputtered thin films dedicated to mechanical applications",
      "volume": "270",
      "author": "Rouzaud",
      "year": "1995",
      "journal-title": "Thin Solid Films"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB61",
      "doi-asserted-by": "crossref",
      "first-page": "195",
      "DOI": "10.1016/S0040-6090(98)01056-6",
      "article-title": "Mechanical properties of W and W(C) thin films: Young\u2019s modulus fracture toughness and adhesion",
      "volume": "332",
      "author": "Harry",
      "year": "1998",
      "journal-title": "Thin Solid films"
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB62",
      "unstructured": "K. Holmberg, A. Matthews, Elsevier Tribology Series 28 D, in: Dowson (Ed.), Coatings Tribology: Properties Techniques and Applications in Surface Engineering, Elsevier, Amsterdam, 1994, ISBN: 0-444-88870-5."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB63",
      "doi-asserted-by": "crossref",
      "first-page": "1",
      "DOI": "10.1016/S0257-8972(97)00578-1",
      "article-title": "Design aspects for advanced tribological surface coatings",
      "volume": "100/101",
      "author": "Matthews",
      "year": "1998",
      "journal-title": "Surf. Coat. Technol."
    },
    {
      "key": "10.1016/S0043-1648(00)00488-9_BIB64",
      "unstructured": "A. Matthews, A. Leyland, Developments in PVD tribological coatings, in: Proceedings of the 5th ASM Heat Treatment and Surface Engineering Conference in Europe, Gothenburg, Sweden, UK, 7\u20139 June 2000, ASM Int., Materials Park, OH, USA, 2000."
    }
  ],
  "container-title": "Wear",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://api.elsevier.com/content/article/PII:S0043164800004889?httpAccept=text/xml",
      "content-type": "text/xml",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "https://api.elsevier.com/content/article/PII:S0043164800004889?httpAccept=text/plain",
      "content-type": "text/plain",
      "content-version": "vor",
      "intended-application": "text-mining"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2019,
        5,
        1
      ]
    ],
    "date-time": "2019-05-01T13:58:52Z",
    "timestamp": 1556719132000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "https://linkinghub.elsevier.com/retrieve/pii/S0043164800004889"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        2000,
        11
      ]
    ]
  },
  "references-count": 64,
  "journal-issue": {
    "issue": "1-2",
    "published-print": {
      "date-parts": [
        [
          2000,
          11
        ]
      ]
    }
  },
  "alternative-id": [
    "S0043164800004889"
  ],
  "URL": "http://dx.doi.org/10.1016/S0043-1648(00)00488-9",
  "relation": {},
  "ISSN": [
    "0043-1648"
  ],
  "subject": [],
  "container-title-short": "Wear",
  "published": {
    "date-parts": [
      [
        2000,
        11
      ]
    ]
  }
}