DOI: 10.1016/s0007-8506(07)61134-2. Ultraprecision Metal Cutting

Ultraprecision Metal Cutting — The Past, the Present and the Future

10.1016/s0007-8506(07)61134-2

Crossref journal-article

Elsevier BV

CIRP Annals (78)

Bibliography

Ikawa, N., Donaldson, R. R., Komanduri, R., KÃ¶nig, W., Aachen, T. H., McKeown, P. A., Moriwaki, T., & Stowers, I. F. (1991). Ultraprecision Metal Cutting â The Past, the Present and the Future. CIRP Annals, 40(2), 587â594.

Authors 8

N. Ikawa (first)
R.R. Donaldson (additional)
R. Komanduri (additional)
W. König (additional)
T.H. Aachen (additional)
P.A. McKeown (additional)
T. Moriwaki (additional)
I.F. Stowers (additional)

References 75 Referenced 275

10.1080/00207546108943090 / Int. Jnl., Prod. Research / On the Size Effect in Metal Cutting by Armarego (1962)
10.1117/12.955119 / Proc. SPIE / Machinability Studies of Infrared Window Materials and Metals by Arnold (1976)
10.1016/S0007-8506(07)61008-7 / Annals of the CIRP / Measuring the Very Small Cutting-Edge Radius for a Diamond Tool Using a New Kind of SEM Having Two Detectors by Asai (1990)
{'key': '10.1016/S0007-8506(07)61134-2_bib4', 'first-page': '61', 'article-title': 'The Size Effect in Metal Cutting', 'volume': '74', 'author': 'Backer', 'year': '1952', 'journal-title': 'Trans. ASME'} / Trans. ASME / The Size Effect in Metal Cutting by Backer (1952)
Belak, J.F., Hoover, W.G., Hoover, C.G., De Groot, A.J., Stowers, I. F., 1990, Molecular Dynamics Modeling Applied to Indentation and Metal Cutting Problems. Thrust Area Repts, FY89, UCRL-53868-89, 4-8/4-16.
10.1117/12.7972286 / Optical Engg. / Diamond Turning at a Large Optical Manufacturer by Benjamin (1978)
{'issue': '6', 'key': '10.1016/S0007-8506(07)61134-2_bib7', 'first-page': '1038', 'article-title': 'Precision Machining of Ceramic Materials', 'volume': '67', 'author': 'Blake', 'year': '1988', 'journal-title': 'Ceramic Bulletin'} / Ceramic Bulletin / Precision Machining of Ceramic Materials by Blake (1988)
10.1111/j.1151-2916.1990.tb05142.x / J. Am. Ceram, Soc. / Ductile-Regime Machining of Ge and Si by Blake (1990)
{'key': '10.1016/S0007-8506(07)61134-2_bib9', 'article-title': 'Spindle Accuracy', 'author': 'Bryan', 'year': '1967', 'journal-title': 'American Machinist'} / American Machinist / Spindle Accuracy by Bryan (1967)
10.1016/0141-6359(79)90071-0 / Precision Engineering / Design and Construction of an Ultraprecision 84 in Diamond Turning Machine by Bryan (1979)
10.1016/0141-6359(83)90063-6 / Precision Engineering / Diamond Turning of Steel in Carbon-Saturated Atmosphere by Casstevens (1983)
10.1016/S0007-8506(07)61906-4 / Annals of the CIRP / Shower and High Pressure Oil Temperature Control by Debra (1986)
Decker, D.L., Grandjean, D.J., Bennett, J.M., 1979, Optical and Surface Characteristics of Diamond-Machined Infrared Windows. The Science of Ceramic Machining and Surface Finishing II, NBS Special Publication 562, 293/304.
10.1117/12.936790 / Proc. SPIE / Design and Construction of a Large Vertical Axis Diamond Turning Machine by Donaldson (1983)
Donaldson, R.R., Syn, C.K., Taylor, J.S., Ikawa, N., Shimada, S., 1987, Minimum Thickness of Cut in Diamond Turning of Electroplated Copper, UCRL-97606.
10.1016/S0007-8506(07)62056-3 / Annals of the CIRP / Cryogenic Diamond Turning of stainless Steel by Evans (1991)
10.1016/S0007-8506(07)61598-4 / Annals of the CIRP / Effect of Material Properties on Ultra Precise Cutting Processes by Furukawa (1988)
10.1557/PROC-140-119 / Material Research Symposium. Proc. / Interface Tribology via Nonequilibrium Molecular Dynamics by Hoover (1989)
{'key': '10.1016/S0007-8506(07)61134-2_bib19', 'first-page': '153', 'article-title': 'Thermal Aspects of Wear of Diamond Grain in Grinding', 'volume': '19', 'author': 'Ikawa', 'year': '1971', 'journal-title': 'Annals of the CIRP'} / Annals of the CIRP / Thermal Aspects of Wear of Diamond Grain in Grinding by Ikawa (1971)
10.1016/S0007-8506(07)63271-5 / Annals of the CIRP / Microfracture of Diamond as Fine Tool Material by Ikawa (1982)
{'issue': '1727', 'key': '10.1016/S0007-8506(07)61134-2_bib21', 'first-page': '343', 'article-title': 'Microstrenth of Diamond characterized, by Infrared absorption Technol', 'volume': '33', 'author': 'Ikawa', 'year': '1983', 'journal-title': 'Rept. Osaka Univ.'} / Rept. Osaka Univ. / Microstrenth of Diamond characterized, by Infrared absorption Technol by Ikawa (1983)
10.1016/S0007-8506(07)61737-5 / Annals of the CIRP / Non-Destructive Strength Evaluation of Diamond for Ultra-Precision Cutting Tool by Ikawa (1985)
10.2493/jjspe.52.2000 / J. Japan Soc. Prec. Engg. / Limitation in Accuracy of ultraprecision Metal Cutting by Ikawa (1986)
Ikawa, N., Shimada, S., Morooka, H., Hirano, H., 1986. Non-Reference Analysis of Rotational Accuracy with Nanometer Resolution on Ultraprecision Spindle, Technol. Repts. Osaka Univ., 36, 1861, 369/378.
{'key': '10.1016/S0007-8506(07)61134-2_bib25', 'series-title': 'Minimum Thickness of Cut in Micromachining, 2nd Nanotechnoloy of Seminar', 'author': 'Ikawa', 'year': '1990'} / Minimum Thickness of Cut in Micromachining, 2nd Nanotechnoloy of Seminar by Ikawa (1990)
10.1016/S0007-8506(07)62051-4 / Annals of the CIRP / An Atomistic Analysis of Nanometric Chip Removal Process as Affected by Tool-Work Interaction in Diamond Turning by Ikawa (1991)
10.2493/jjspe.56.1480 / Jap. Soc. Prec. Engg. / Cutting Experiments in a Computer Using Atomic Models 07 a Copper Crystal and a Diamond Tool by Inamura (1990)
{'key': '10.1016/S0007-8506(07)61134-2_bib28', 'first-page': '510', 'article-title': 'A Study of Cutting Temperature in Ultra-High Precision Diamond Cutting of Copper', 'author': 'Iwata', 'year': '1987', 'journal-title': 'Proc. 15th NAMRC'} / Proc. 15th NAMRC / A Study of Cutting Temperature in Ultra-High Precision Diamond Cutting of Copper by Iwata (1987)
10.1016/S0007-8506(07)63406-4 / Annals of the CIRP / Nanometer Positioning Characteristics of Closed Looped Differential Hydro or Aerostatic Actuator by Kanai (1983)
Kim, J.A., 1987, Method of Machining Hard and Brittle Material, U. S. Pat., No. 4, 643, 161.
Kobayashi, A., Precision Machining Method for Ceramics Chap. 13 in Advanced Technical Ceramics, ed. by Somiya, S., Academic Press, Tokyo, 261/308. (10.1016/B978-0-12-654630-9.50017-6)
{'key': '10.1016/S0007-8506(07)61134-2_bib32', 'first-page': '63', 'article-title': 'A Study on Diamond Cutting of Single LiNbO3', 'author': 'Kodera', 'year': '1987', 'journal-title': "Proc. AMST '87, Yugoslavia"} / Proc. AMST '87, Yugoslavia / A Study on Diamond Cutting of Single LiNbO3 by Kodera (1987)
{'key': '10.1016/S0007-8506(07)61134-2_bib33', 'first-page': '223', 'article-title': 'Some Aspect of Machining with Negative Rake Tool Simulating Grinding', 'volume': '11', 'author': 'Komanduri', 'year': '1971', 'journal-title': 'Int. J. MTDR'} / Int. J. MTDR / Some Aspect of Machining with Negative Rake Tool Simulating Grinding by Komanduri (1971)
10.1038/255211a0 / Nature / Wear of Synthetic Diamond When Grinding Ferrous Materials by Komanduri (1975)
10.1080/14786437608221935 / Phil. Mag. / On the Diffusion Wear of Diamond in Grinding Pure Iron by Komanduri (1976)
Komanduri, R., 1991, Unpublished survey.
{'key': '10.1016/S0007-8506(07)61134-2_bib37', 'first-page': '33', 'article-title': 'Zerspantechnologie in Mikrometerbereich', 'volume': '99', 'author': 'Konig', 'year': '1988', 'journal-title': 'Industrie-Anzeiger'} / Industrie-Anzeiger / Zerspantechnologie in Mikrometerbereich by Konig (1988)
König, w., Spanrath, N., 1991, The Influence of the Crystallographic Structure of the Substrate Material on Surface Quality and Cutting forces in Micromachining, Progress in Precision Engineering, Proc. IPES 6/UME2, Braunschweig, 141/152. (10.1007/978-3-642-84494-2_15)
{'issue': '2', 'key': '10.1016/S0007-8506(07)61134-2_bib39', 'first-page': '413', 'article-title': 'Perceived Limitations on Future Advances in Ultraprecision Machining', 'volume': '32', 'author': 'Loewen', 'year': '1984', 'journal-title': 'Annals of the DIRP'} / Annals of the DIRP / Perceived Limitations on Future Advances in Ultraprecision Machining by Loewen (1984)
Loladze, T.N., Bockuchava, G.V., 1972, Criteria for Determining Cutting Properties of Abrasive Tools, New Developments in Grinding, Proc. Int. Grinding Conf., Pittsburgh, PA, 432/448.
10.1016/S0007-8506(07)61936-2 / Annals of the CIRP / Energy Dissipation in the Ultra-Precision Machining of Copper by Lucca (1991)
10.1016/S0007-8506(07)60751-3 / Annals of the CIRP / The role of Precision Engineering in Manufacturing of the Future by McKeown (1987)
McKeown, P.A., Wills-Moren, W.J., Read, R.F.J., 1987. In-situ metrology and machine based interferometry for shape determination, SPIE. Vol. 802 In-Process Optical Metrology for Precision Machining, 42/49. (10.1117/12.967101)
McKeown P.A., Carlisle, K., Shore, P., Read, R.F.J., 1990, Ultraprecision, High stiffness CNC Grinding Machines for Ductile Mode Grinding of Brittle Materials, SPIE, Vol. 1320 Infrared Technology o Application, 301/313.
10.1016/0141-6359(87)90056-0 / Precision Engineering, of Diamond / Ultra Fine Finishing of Diamond Tools by Ion Beams by Miyamoto (1987)
10.1016/S0007-8506(07)62664-X / Annals of the CIRP. / Machinability of Copper in Ultra-Precision Micro Diamond Cutting by Moriwaki (1989)
10.1016/S0007-8506(07)61007-5 / Annals of the CIRP / Effect of Cutting Heat on Machining Accuracy in Ultra-Precision Diamond Turning by Moriwaki (1990)
10.1016/S0007-8506(07)62053-8 / Annals of the CIRP / Ultra Precision Diamond Turning of Stainless Steel by Applying Ultrasonic Vibration by Moriwaki (1991)
10.1117/12.942168 / Proc. SPIE / Development of a Precision Diamond Cutting Machine for Fabrication of Asymmetrical Aspheric Mirrors by Moriyama (1987)
{'issue': '64', 'key': '10.1016/S0007-8506(07)61134-2_bib50', 'first-page': '25', 'volume': '14', 'author': 'Nagashima', 'year': '1990', 'journal-title': 'ITEJ Tech. Repts.'} / ITEJ Tech. Repts. by Nagashima (1990)
10.1016/S0007-8506(07)61009-9 / Annals of the CIRP / Diamond Turning of Brittle Materials for Optical Components by Nakasuji (1990)
10.1115/1.3604585 / Trans. ASME. J. Engg. Ind. / Size Effect in Metal Cutting Force by Nakayama (1968)
Nishimura, K., Yoshinaga, H., Shimada, S., Ikawa, N., 1988, An Ultraprecision Diamond Cutting Tool with a 50 nm Corner Radius Roundness for Aspheric Turning, Proc. 1st Conf. of new Diamond Science and Technology Tokyo, 475/478.
Nishiuchi, T., Masuda, M., Maeda, Y., 1989, Advanced Grinding Technology for Precision Diamond Cutting Tools, Abstract. 5th IPES, Monterey, CA., 183/203.
{'issue': '2', 'key': '10.1016/S0007-8506(07)61134-2_bib55', 'first-page': '158', 'article-title': 'A Study on an Automatic Radial Runout Compensator for Hydrostatically Supported Spindle', 'volume': '55', 'author': 'Nomura', 'year': '1989', 'journal-title': 'J. Japan Soc. Prec. Engg.'} / J. Japan Soc. Prec. Engg. / A Study on an Automatic Radial Runout Compensator for Hydrostatically Supported Spindle by Nomura (1989)
{'issue': '1', 'key': '10.1016/S0007-8506(07)61134-2_bib56', 'first-page': '3', 'article-title': 'Primary Factors Affecting Accuracy in Ultra-Precision Machining by Diamond Tool', 'volume': '16', 'author': 'Ohmori', 'year': '1982', 'journal-title': 'Bull. Japan Soc. of Prec. Engg.'} / Bull. Japan Soc. of Prec. Engg. / Primary Factors Affecting Accuracy in Ultra-Precision Machining by Diamond Tool by Ohmori (1982)
Patterson, S.R., Magrab, E.B., 1985. Design and Testing of a Fast Tool Servo for Diamond Turning, Abstracts, 3rd IPES, Interlaken, 29/33, (10.1016/0141-6359(85)90030-3)
10.1098/rspa.1989.0116 / Proc. R. Soc., Lond. / Single-Point Diamond Machining of Glasses by Puttick (1989)
10.1117/12.7972285 / Optical Engg. / Diamond Turning of Optics; The Past, the Present and the Exciting Future by Saito (1978)
Shimada, S., Yoshinaga, H., Ohmori, G., Uchikoshi, J., 1989. The Scientific Qualification of Diamond as Applied to a Highly Reliable Cutting Tool, Preprints, 5th IPES, Monterey, 75/85.
{'issue': '1', 'key': '10.1016/S0007-8506(07)61134-2_bib61', 'first-page': '563', 'article-title': 'An Active Air Journal Bearing with Ultraprecision, Infinite Static Stiffness', 'volume': '40', 'author': 'Shimokohbe', 'year': '1991', 'journal-title': 'High Damping Capability and New Functions'} / High Damping Capability and New Functions / An Active Air Journal Bearing with Ultraprecision, Infinite Static Stiffness by Shimokohbe (1991)
Shore, P., 1989, State of the Art in Damage Free Grinding of Advanced Engineering Ceramics, UK Nanotechnology Forum, September, 1989.
Stadler, H., Freisleben, B., Heubeck, C., 1987, Response of Metallic Material to Micromachining, Cranfield, U.K. (10.1117/12.967103)
Stowers, I.F., 1990, Molecular Dynamics Modeling to Indentation and Metal Cutting, Video Presentation at CIRP meeting in Berlin.
Stowers, I.F., 1991, Private Communication.
10.1016/S0007-8506(07)62544-X / Annals of the CIRP / Diamond Turning of an Aluminum Alloy for Mirror by Sugano (1987)
{'key': '10.1016/S0007-8506(07)61134-2_bib67', 'first-page': '735', 'article-title': 'Ductile-Brittle Transition of Cutting Behavior in Diamond Turning of Single Crystal Si', 'author': 'Syn', 'year': '1988', 'journal-title': 'Prepr, of Japan Soc. Prec. Engg.'} / Prepr, of Japan Soc. Prec. Engg. / Ductile-Brittle Transition of Cutting Behavior in Diamond Turning of Single Crystal Si by Syn (1988)
10.1016/S0007-8506(07)61812-5 / Annals of the CIRP / Influence of Steady Vibration with Small Upon Surface Roughness in Diamond by Takasu (1985)
10.1016/S0007-8506(07)60185-1 / Annals of the CIRP / Current Status in, and Future Trends of, Ultraprecision Machining and Ultrafine Materials Processing by Taniguchi (1983)
10.2493/jjspe.57.348 / J. Japan Soc. Prec. Engg. / Fabrication of Aspheric Mirrors for a Hard X-ray Microprobe by Uchida (1991)
{'key': '10.1016/S0007-8506(07)61134-2_bib71', 'first-page': '2', 'article-title': 'The mechanical Strength and Reliability of Natural Diamonds', 'author': 'Wilks', 'year': '1978', 'journal-title': 'Diamond Research'} / Diamond Research / The mechanical Strength and Reliability of Natural Diamonds by Wilks (1978)
{'key': '10.1016/S0007-8506(07)61134-2_bib72', 'first-page': '8', 'article-title': 'Light Scattering in Diamonds and Their Mechanical Reliability', 'author': 'Wilks', 'year': '1980', 'journal-title': 'Industrial Diamond Review'} / Industrial Diamond Review / Light Scattering in Diamonds and Their Mechanical Reliability by Wilks (1980)
10.1016/S0007-8506(07)63338-1 / Annals of the CIRP / Some Aspects of the Design and Development of a large High Precision CNC Diamond Turning Machine by Wilks-Moren (1982)
10.1016/S0007-8506(07)62761-9 / Annals of the CIRP / The Design and Manufacture of a Large CNC Grinding Machine for Off-Axis Mirror Segments by Wills-Moren (1989)
10.1115/1.3225025 / Trans. ASME, J. of Engg, Materials and Technology / Fracture and Wear of Diamond Cutting Tool by Wong (1981)

Dates

Type	When
Created	17 years, 7 months ago (Jan. 30, 2008, 9:43 a.m.)
Deposited	6 years, 3 months ago (May 7, 2019, 10:19 a.m.)
Indexed	1 week, 4 days ago (Aug. 23, 2025, 1:03 a.m.)
Issued	34 years, 8 months ago (Jan. 1, 1991)
Published	34 years, 8 months ago (Jan. 1, 1991)
Published Print	34 years, 8 months ago (Jan. 1, 1991)

Funders 0

None

BibTeX

@article{Ikawa_1991, title={Ultraprecision Metal Cutting — The Past, the Present and the Future}, volume={40}, ISSN={0007-8506}, url={http://dx.doi.org/10.1016/s0007-8506(07)61134-2}, DOI={10.1016/s0007-8506(07)61134-2}, number={2}, journal={CIRP Annals}, publisher={Elsevier BV}, author={Ikawa, N. and Donaldson, R.R. and Komanduri, R. and König, W. and Aachen, T.H. and McKeown, P.A. and Moriwaki, T. and Stowers, I.F.}, year={1991}, pages={587–594} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2025,
        8,
        23
      ]
    ],
    "date-time": "2025-08-23T05:03:46Z",
    "timestamp": 1755925426185
  },
  "reference-count": 75,
  "publisher": "Elsevier BV",
  "issue": "2",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            1991,
            1,
            1
          ]
        ],
        "date-time": "1991-01-01T00:00:00Z",
        "timestamp": 662688000000
      },
      "content-version": "tdm",
      "delay-in-days": 0,
      "URL": "https://www.elsevier.com/tdm/userlicense/1.0/"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        1991
      ]
    ]
  },
  "DOI": "10.1016/s0007-8506(07)61134-2",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2008,
        1,
        30
      ]
    ],
    "date-time": "2008-01-30T14:43:52Z",
    "timestamp": 1201704232000
  },
  "page": "587-594",
  "source": "Crossref",
  "is-referenced-by-count": 275,
  "title": "Ultraprecision Metal Cutting \u2014 The Past, the Present and the Future",
  "prefix": "10.1016",
  "volume": "40",
  "author": [
    {
      "given": "N.",
      "family": "Ikawa",
      "sequence": "first",
      "affiliation": []
    },
    {
      "given": "R.R.",
      "family": "Donaldson",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "R.",
      "family": "Komanduri",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "W.",
      "family": "K\u00f6nig",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "T.H.",
      "family": "Aachen",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "P.A.",
      "family": "McKeown",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "T.",
      "family": "Moriwaki",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "I.F.",
      "family": "Stowers",
      "sequence": "additional",
      "affiliation": []
    }
  ],
  "member": "78",
  "reference": [
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib1",
      "doi-asserted-by": "crossref",
      "first-page": "75",
      "DOI": "10.1080/00207546108943090",
      "article-title": "On the Size Effect in Metal Cutting",
      "volume": "1",
      "author": "Armarego",
      "year": "1962",
      "journal-title": "Int. Jnl., Prod. Research"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib2",
      "doi-asserted-by": "crossref",
      "first-page": "96",
      "DOI": "10.1117/12.955119",
      "article-title": "Machinability Studies of Infrared Window Materials and Metals",
      "volume": "93",
      "author": "Arnold",
      "year": "1976",
      "journal-title": "Proc. SPIE"
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib3",
      "doi-asserted-by": "crossref",
      "first-page": "85",
      "DOI": "10.1016/S0007-8506(07)61008-7",
      "article-title": "Measuring the Very Small Cutting-Edge Radius for a Diamond Tool Using a New Kind of SEM Having Two Detectors",
      "volume": "39",
      "author": "Asai",
      "year": "1990",
      "journal-title": "Annals of the CIRP"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib4",
      "first-page": "61",
      "article-title": "The Size Effect in Metal Cutting",
      "volume": "74",
      "author": "Backer",
      "year": "1952",
      "journal-title": "Trans. ASME"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib5",
      "unstructured": "Belak, J.F., Hoover, W.G., Hoover, C.G., De Groot, A.J., Stowers, I. F., 1990, Molecular Dynamics Modeling Applied to Indentation and Metal Cutting Problems. Thrust Area Repts, FY89, UCRL-53868-89, 4-8/4-16."
    },
    {
      "issue": "6",
      "key": "10.1016/S0007-8506(07)61134-2_bib6",
      "doi-asserted-by": "crossref",
      "first-page": "574",
      "DOI": "10.1117/12.7972286",
      "article-title": "Diamond Turning at a Large Optical Manufacturer",
      "volume": "17",
      "author": "Benjamin",
      "year": "1978",
      "journal-title": "Optical Engg."
    },
    {
      "issue": "6",
      "key": "10.1016/S0007-8506(07)61134-2_bib7",
      "first-page": "1038",
      "article-title": "Precision Machining of Ceramic Materials",
      "volume": "67",
      "author": "Blake",
      "year": "1988",
      "journal-title": "Ceramic Bulletin"
    },
    {
      "issue": "4",
      "key": "10.1016/S0007-8506(07)61134-2_bib8",
      "doi-asserted-by": "crossref",
      "first-page": "949",
      "DOI": "10.1111/j.1151-2916.1990.tb05142.x",
      "article-title": "Ductile-Regime Machining of Ge and Si",
      "volume": "73",
      "author": "Blake",
      "year": "1990",
      "journal-title": "J. Am. Ceram, Soc."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib9",
      "article-title": "Spindle Accuracy",
      "author": "Bryan",
      "year": "1967",
      "journal-title": "American Machinist"
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib10",
      "doi-asserted-by": "crossref",
      "first-page": "13",
      "DOI": "10.1016/0141-6359(79)90071-0",
      "article-title": "Design and Construction of an Ultraprecision 84 in Diamond Turning Machine",
      "volume": "1",
      "author": "Bryan",
      "year": "1979",
      "journal-title": "Precision Engineering"
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib11",
      "doi-asserted-by": "crossref",
      "first-page": "9",
      "DOI": "10.1016/0141-6359(83)90063-6",
      "article-title": "Diamond Turning of Steel in Carbon-Saturated Atmosphere",
      "volume": "5",
      "author": "Casstevens",
      "year": "1983",
      "journal-title": "Precision Engineering"
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib12",
      "doi-asserted-by": "crossref",
      "first-page": "359",
      "DOI": "10.1016/S0007-8506(07)61906-4",
      "article-title": "Shower and High Pressure Oil Temperature Control",
      "volume": "35",
      "author": "Debra",
      "year": "1986",
      "journal-title": "Annals of the CIRP"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib13",
      "unstructured": "Decker, D.L., Grandjean, D.J., Bennett, J.M., 1979, Optical and Surface Characteristics of Diamond-Machined Infrared Windows. The Science of Ceramic Machining and Surface Finishing II, NBS Special Publication 562, 293/304."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib14",
      "doi-asserted-by": "crossref",
      "first-page": "62",
      "DOI": "10.1117/12.936790",
      "article-title": "Design and Construction of a Large Vertical Axis Diamond Turning Machine",
      "volume": "433",
      "author": "Donaldson",
      "year": "1983",
      "journal-title": "Proc. SPIE"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib15",
      "unstructured": "Donaldson, R.R., Syn, C.K., Taylor, J.S., Ikawa, N., Shimada, S., 1987, Minimum Thickness of Cut in Diamond Turning of Electroplated Copper, UCRL-97606."
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib16",
      "doi-asserted-by": "crossref",
      "first-page": "571",
      "DOI": "10.1016/S0007-8506(07)62056-3",
      "article-title": "Cryogenic Diamond Turning of stainless Steel",
      "volume": "44",
      "author": "Evans",
      "year": "1991",
      "journal-title": "Annals of the CIRP"
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib17",
      "doi-asserted-by": "crossref",
      "first-page": "113",
      "DOI": "10.1016/S0007-8506(07)61598-4",
      "article-title": "Effect of Material Properties on Ultra Precise Cutting Processes",
      "volume": "37",
      "author": "Furukawa",
      "year": "1988",
      "journal-title": "Annals of the CIRP"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib18",
      "doi-asserted-by": "crossref",
      "first-page": "119",
      "DOI": "10.1557/PROC-140-119",
      "article-title": "Interface Tribology via Nonequilibrium Molecular Dynamics",
      "volume": "140",
      "author": "Hoover",
      "year": "1989",
      "journal-title": "Material Research Symposium. Proc."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib19",
      "first-page": "153",
      "article-title": "Thermal Aspects of Wear of Diamond Grain in Grinding",
      "volume": "19",
      "author": "Ikawa",
      "year": "1971",
      "journal-title": "Annals of the CIRP"
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib20",
      "doi-asserted-by": "crossref",
      "first-page": "71",
      "DOI": "10.1016/S0007-8506(07)63271-5",
      "article-title": "Microfracture of Diamond as Fine Tool Material",
      "volume": "31",
      "author": "Ikawa",
      "year": "1982",
      "journal-title": "Annals of the CIRP"
    },
    {
      "issue": "1727",
      "key": "10.1016/S0007-8506(07)61134-2_bib21",
      "first-page": "343",
      "article-title": "Microstrenth of Diamond characterized, by Infrared absorption Technol",
      "volume": "33",
      "author": "Ikawa",
      "year": "1983",
      "journal-title": "Rept. Osaka Univ."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib22",
      "doi-asserted-by": "crossref",
      "first-page": "117",
      "DOI": "10.1016/S0007-8506(07)61737-5",
      "article-title": "Non-Destructive Strength Evaluation of Diamond for Ultra-Precision Cutting Tool",
      "volume": "34",
      "author": "Ikawa",
      "year": "1985",
      "journal-title": "Annals of the CIRP"
    },
    {
      "issue": "12",
      "key": "10.1016/S0007-8506(07)61134-2_bib23",
      "doi-asserted-by": "crossref",
      "first-page": "2000",
      "DOI": "10.2493/jjspe.52.2000",
      "article-title": "Limitation in Accuracy of ultraprecision Metal Cutting",
      "volume": "52",
      "author": "Ikawa",
      "year": "1986",
      "journal-title": "J. Japan Soc. Prec. Engg."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib24",
      "unstructured": "Ikawa, N., Shimada, S., Morooka, H., Hirano, H., 1986. Non-Reference Analysis of Rotational Accuracy with Nanometer Resolution on Ultraprecision Spindle, Technol. Repts. Osaka Univ., 36, 1861, 369/378."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib25",
      "series-title": "Minimum Thickness of Cut in Micromachining, 2nd Nanotechnoloy of Seminar",
      "author": "Ikawa",
      "year": "1990"
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib26",
      "doi-asserted-by": "crossref",
      "first-page": "551",
      "DOI": "10.1016/S0007-8506(07)62051-4",
      "article-title": "An Atomistic Analysis of Nanometric Chip Removal Process as Affected by Tool-Work Interaction in Diamond Turning",
      "volume": "44",
      "author": "Ikawa",
      "year": "1991",
      "journal-title": "Annals of the CIRP"
    },
    {
      "issue": "8",
      "key": "10.1016/S0007-8506(07)61134-2_bib27",
      "doi-asserted-by": "crossref",
      "first-page": "1480",
      "DOI": "10.2493/jjspe.56.1480",
      "article-title": "Cutting Experiments in a Computer Using Atomic Models 07 a Copper Crystal and a Diamond Tool",
      "volume": "56",
      "author": "Inamura",
      "year": "1990",
      "journal-title": "Jap. Soc. Prec. Engg."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib28",
      "first-page": "510",
      "article-title": "A Study of Cutting Temperature in Ultra-High Precision Diamond Cutting of Copper",
      "author": "Iwata",
      "year": "1987",
      "journal-title": "Proc. 15th NAMRC"
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib29",
      "doi-asserted-by": "crossref",
      "first-page": "287",
      "DOI": "10.1016/S0007-8506(07)63406-4",
      "article-title": "Nanometer Positioning Characteristics of Closed Looped Differential Hydro or Aerostatic Actuator",
      "volume": "32",
      "author": "Kanai",
      "year": "1983",
      "journal-title": "Annals of the CIRP"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib30",
      "unstructured": "Kim, J.A., 1987, Method of Machining Hard and Brittle Material, U. S. Pat., No. 4, 643, 161."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib31",
      "doi-asserted-by": "crossref",
      "unstructured": "Kobayashi, A., Precision Machining Method for Ceramics Chap. 13 in Advanced Technical Ceramics, ed. by Somiya, S., Academic Press, Tokyo, 261/308.",
      "DOI": "10.1016/B978-0-12-654630-9.50017-6"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib32",
      "first-page": "63",
      "article-title": "A Study on Diamond Cutting of Single LiNbO3",
      "author": "Kodera",
      "year": "1987",
      "journal-title": "Proc. AMST '87, Yugoslavia"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib33",
      "first-page": "223",
      "article-title": "Some Aspect of Machining with Negative Rake Tool Simulating Grinding",
      "volume": "11",
      "author": "Komanduri",
      "year": "1971",
      "journal-title": "Int. J. MTDR"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib34",
      "doi-asserted-by": "crossref",
      "first-page": "5505",
      "DOI": "10.1038/255211a0",
      "article-title": "Wear of Synthetic Diamond When Grinding Ferrous Materials",
      "volume": "255",
      "author": "Komanduri",
      "year": "1975",
      "journal-title": "Nature"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib35",
      "doi-asserted-by": "crossref",
      "first-page": "195",
      "DOI": "10.1080/14786437608221935",
      "article-title": "On the Diffusion Wear of Diamond in Grinding Pure Iron",
      "volume": "34",
      "author": "Komanduri",
      "year": "1976",
      "journal-title": "Phil. Mag."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib36",
      "unstructured": "Komanduri, R., 1991, Unpublished survey."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib37",
      "first-page": "33",
      "article-title": "Zerspantechnologie in Mikrometerbereich",
      "volume": "99",
      "author": "Konig",
      "year": "1988",
      "journal-title": "Industrie-Anzeiger"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib38",
      "doi-asserted-by": "crossref",
      "unstructured": "K\u00f6nig, w., Spanrath, N., 1991, The Influence of the Crystallographic Structure of the Substrate Material on Surface Quality and Cutting forces in Micromachining, Progress in Precision Engineering, Proc. IPES 6/UME2, Braunschweig, 141/152.",
      "DOI": "10.1007/978-3-642-84494-2_15"
    },
    {
      "issue": "2",
      "key": "10.1016/S0007-8506(07)61134-2_bib39",
      "first-page": "413",
      "article-title": "Perceived Limitations on Future Advances in Ultraprecision Machining",
      "volume": "32",
      "author": "Loewen",
      "year": "1984",
      "journal-title": "Annals of the DIRP"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib40",
      "unstructured": "Loladze, T.N., Bockuchava, G.V., 1972, Criteria for Determining Cutting Properties of Abrasive Tools, New Developments in Grinding, Proc. Int. Grinding Conf., Pittsburgh, PA, 432/448."
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib41",
      "doi-asserted-by": "crossref",
      "first-page": "69",
      "DOI": "10.1016/S0007-8506(07)61936-2",
      "article-title": "Energy Dissipation in the Ultra-Precision Machining of Copper",
      "volume": "40",
      "author": "Lucca",
      "year": "1991",
      "journal-title": "Annals of the CIRP"
    },
    {
      "issue": "2",
      "key": "10.1016/S0007-8506(07)61134-2_bib42",
      "doi-asserted-by": "crossref",
      "first-page": "495",
      "DOI": "10.1016/S0007-8506(07)60751-3",
      "article-title": "The role of Precision Engineering in Manufacturing of the Future",
      "volume": "36",
      "author": "McKeown",
      "year": "1987",
      "journal-title": "Annals of the CIRP"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib43",
      "doi-asserted-by": "crossref",
      "unstructured": "McKeown, P.A., Wills-Moren, W.J., Read, R.F.J., 1987. In-situ metrology and machine based interferometry for shape determination, SPIE. Vol. 802 In-Process Optical Metrology for Precision Machining, 42/49.",
      "DOI": "10.1117/12.967101"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib44",
      "unstructured": "McKeown P.A., Carlisle, K., Shore, P., Read, R.F.J., 1990, Ultraprecision, High stiffness CNC Grinding Machines for Ductile Mode Grinding of Brittle Materials, SPIE, Vol. 1320 Infrared Technology o Application, 301/313."
    },
    {
      "issue": "2",
      "key": "10.1016/S0007-8506(07)61134-2_bib45",
      "doi-asserted-by": "crossref",
      "first-page": "71",
      "DOI": "10.1016/0141-6359(87)90056-0",
      "article-title": "Ultra Fine Finishing of Diamond Tools by Ion Beams",
      "volume": "9",
      "author": "Miyamoto",
      "year": "1987",
      "journal-title": "Precision Engineering, of Diamond"
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib46",
      "doi-asserted-by": "crossref",
      "first-page": "115",
      "DOI": "10.1016/S0007-8506(07)62664-X",
      "article-title": "Machinability of Copper in Ultra-Precision Micro Diamond Cutting",
      "volume": "38",
      "author": "Moriwaki",
      "year": "1989",
      "journal-title": "Annals of the CIRP."
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib47",
      "doi-asserted-by": "crossref",
      "first-page": "81",
      "DOI": "10.1016/S0007-8506(07)61007-5",
      "article-title": "Effect of Cutting Heat on Machining Accuracy in Ultra-Precision Diamond Turning",
      "volume": "39",
      "author": "Moriwaki",
      "year": "1990",
      "journal-title": "Annals of the CIRP"
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib48",
      "doi-asserted-by": "crossref",
      "first-page": "559",
      "DOI": "10.1016/S0007-8506(07)62053-8",
      "article-title": "Ultra Precision Diamond Turning of Stainless Steel by Applying Ultrasonic Vibration",
      "volume": "40",
      "author": "Moriwaki",
      "year": "1991",
      "journal-title": "Annals of the CIRP"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib49",
      "doi-asserted-by": "crossref",
      "first-page": "98",
      "DOI": "10.1117/12.942168",
      "article-title": "Development of a Precision Diamond Cutting Machine for Fabrication of Asymmetrical Aspheric Mirrors",
      "volume": "830",
      "author": "Moriyama",
      "year": "1987",
      "journal-title": "Proc. SPIE"
    },
    {
      "issue": "64",
      "key": "10.1016/S0007-8506(07)61134-2_bib50",
      "first-page": "25",
      "volume": "14",
      "author": "Nagashima",
      "year": "1990",
      "journal-title": "ITEJ Tech. Repts."
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib51",
      "doi-asserted-by": "crossref",
      "first-page": "89",
      "DOI": "10.1016/S0007-8506(07)61009-9",
      "article-title": "Diamond Turning of Brittle Materials for Optical Components",
      "volume": "39",
      "author": "Nakasuji",
      "year": "1990",
      "journal-title": "Annals of the CIRP"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib52",
      "doi-asserted-by": "crossref",
      "first-page": "119",
      "DOI": "10.1115/1.3604585",
      "article-title": "Size Effect in Metal Cutting Force",
      "volume": "90",
      "author": "Nakayama",
      "year": "1968",
      "journal-title": "Trans. ASME. J. Engg. Ind."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib53",
      "unstructured": "Nishimura, K., Yoshinaga, H., Shimada, S., Ikawa, N., 1988, An Ultraprecision Diamond Cutting Tool with a 50 nm Corner Radius Roundness for Aspheric Turning, Proc. 1st Conf. of new Diamond Science and Technology Tokyo, 475/478."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib54",
      "unstructured": "Nishiuchi, T., Masuda, M., Maeda, Y., 1989, Advanced Grinding Technology for Precision Diamond Cutting Tools, Abstract. 5th IPES, Monterey, CA., 183/203."
    },
    {
      "issue": "2",
      "key": "10.1016/S0007-8506(07)61134-2_bib55",
      "first-page": "158",
      "article-title": "A Study on an Automatic Radial Runout Compensator for Hydrostatically Supported Spindle",
      "volume": "55",
      "author": "Nomura",
      "year": "1989",
      "journal-title": "J. Japan Soc. Prec. Engg."
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib56",
      "first-page": "3",
      "article-title": "Primary Factors Affecting Accuracy in Ultra-Precision Machining by Diamond Tool",
      "volume": "16",
      "author": "Ohmori",
      "year": "1982",
      "journal-title": "Bull. Japan Soc. of Prec. Engg."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib57",
      "doi-asserted-by": "crossref",
      "unstructured": "Patterson, S.R., Magrab, E.B., 1985. Design and Testing of a Fast Tool Servo for Diamond Turning, Abstracts, 3rd IPES, Interlaken, 29/33,",
      "DOI": "10.1016/0141-6359(85)90030-3"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib58",
      "doi-asserted-by": "crossref",
      "first-page": "19",
      "DOI": "10.1098/rspa.1989.0116",
      "article-title": "Single-Point Diamond Machining of Glasses",
      "volume": "A426",
      "author": "Puttick",
      "year": "1989",
      "journal-title": "Proc. R. Soc., Lond."
    },
    {
      "issue": "6",
      "key": "10.1016/S0007-8506(07)61134-2_bib59",
      "doi-asserted-by": "crossref",
      "first-page": "570",
      "DOI": "10.1117/12.7972285",
      "article-title": "Diamond Turning of Optics; The Past, the Present and the Exciting Future",
      "volume": "17",
      "author": "Saito",
      "year": "1978",
      "journal-title": "Optical Engg."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib60",
      "unstructured": "Shimada, S., Yoshinaga, H., Ohmori, G., Uchikoshi, J., 1989. The Scientific Qualification of Diamond as Applied to a Highly Reliable Cutting Tool, Preprints, 5th IPES, Monterey, 75/85."
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib61",
      "first-page": "563",
      "article-title": "An Active Air Journal Bearing with Ultraprecision, Infinite Static Stiffness",
      "volume": "40",
      "author": "Shimokohbe",
      "year": "1991",
      "journal-title": "High Damping Capability and New Functions"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib62",
      "unstructured": "Shore, P., 1989, State of the Art in Damage Free Grinding of Advanced Engineering Ceramics, UK Nanotechnology Forum, September, 1989."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib63",
      "doi-asserted-by": "crossref",
      "unstructured": "Stadler, H., Freisleben, B., Heubeck, C., 1987, Response of Metallic Material to Micromachining, Cranfield, U.K.",
      "DOI": "10.1117/12.967103"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib64",
      "unstructured": "Stowers, I.F., 1990, Molecular Dynamics Modeling to Indentation and Metal Cutting, Video Presentation at CIRP meeting in Berlin."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib65",
      "unstructured": "Stowers, I.F., 1991, Private Communication."
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib66",
      "doi-asserted-by": "crossref",
      "first-page": "17",
      "DOI": "10.1016/S0007-8506(07)62544-X",
      "article-title": "Diamond Turning of an Aluminum Alloy for Mirror",
      "volume": "36",
      "author": "Sugano",
      "year": "1987",
      "journal-title": "Annals of the CIRP"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib67",
      "first-page": "735",
      "article-title": "Ductile-Brittle Transition of Cutting Behavior in Diamond Turning of Single Crystal Si",
      "author": "Syn",
      "year": "1988",
      "journal-title": "Prepr, of Japan Soc. Prec. Engg."
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib68",
      "doi-asserted-by": "crossref",
      "first-page": "463",
      "DOI": "10.1016/S0007-8506(07)61812-5",
      "article-title": "Influence of Steady Vibration with Small Upon Surface Roughness in Diamond",
      "volume": "31",
      "author": "Takasu",
      "year": "1985",
      "journal-title": "Annals of the CIRP"
    },
    {
      "issue": "2",
      "key": "10.1016/S0007-8506(07)61134-2_bib69",
      "doi-asserted-by": "crossref",
      "first-page": "573",
      "DOI": "10.1016/S0007-8506(07)60185-1",
      "article-title": "Current Status in, and Future Trends of, Ultraprecision Machining and Ultrafine Materials Processing",
      "volume": "32",
      "author": "Taniguchi",
      "year": "1983",
      "journal-title": "Annals of the CIRP"
    },
    {
      "issue": "2",
      "key": "10.1016/S0007-8506(07)61134-2_bib70",
      "doi-asserted-by": "crossref",
      "first-page": "348",
      "DOI": "10.2493/jjspe.57.348",
      "article-title": "Fabrication of Aspheric Mirrors for a Hard X-ray Microprobe",
      "volume": "57",
      "author": "Uchida",
      "year": "1991",
      "journal-title": "J. Japan Soc. Prec. Engg."
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib71",
      "first-page": "2",
      "article-title": "The mechanical Strength and Reliability of Natural Diamonds",
      "author": "Wilks",
      "year": "1978",
      "journal-title": "Diamond Research"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib72",
      "first-page": "8",
      "article-title": "Light Scattering in Diamonds and Their Mechanical Reliability",
      "author": "Wilks",
      "year": "1980",
      "journal-title": "Industrial Diamond Review"
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib73",
      "doi-asserted-by": "crossref",
      "first-page": "409",
      "DOI": "10.1016/S0007-8506(07)63338-1",
      "article-title": "Some Aspects of the Design and Development of a large High Precision CNC Diamond Turning Machine",
      "volume": "31",
      "author": "Wilks-Moren",
      "year": "1982",
      "journal-title": "Annals of the CIRP"
    },
    {
      "issue": "1",
      "key": "10.1016/S0007-8506(07)61134-2_bib74",
      "doi-asserted-by": "crossref",
      "first-page": "529",
      "DOI": "10.1016/S0007-8506(07)62761-9",
      "article-title": "The Design and Manufacture of a Large CNC Grinding Machine for Off-Axis Mirror Segments",
      "volume": "38",
      "author": "Wills-Moren",
      "year": "1989",
      "journal-title": "Annals of the CIRP"
    },
    {
      "key": "10.1016/S0007-8506(07)61134-2_bib75",
      "doi-asserted-by": "crossref",
      "first-page": "341",
      "DOI": "10.1115/1.3225025",
      "article-title": "Fracture and Wear of Diamond Cutting Tool",
      "volume": "103",
      "author": "Wong",
      "year": "1981",
      "journal-title": "Trans. ASME, J. of Engg, Materials and Technology"
    }
  ],
  "container-title": "CIRP Annals",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://api.elsevier.com/content/article/PII:S0007850607611342?httpAccept=text/xml",
      "content-type": "text/xml",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "https://api.elsevier.com/content/article/PII:S0007850607611342?httpAccept=text/plain",
      "content-type": "text/plain",
      "content-version": "vor",
      "intended-application": "text-mining"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2019,
        5,
        7
      ]
    ],
    "date-time": "2019-05-07T14:19:19Z",
    "timestamp": 1557238759000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "https://linkinghub.elsevier.com/retrieve/pii/S0007850607611342"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        1991
      ]
    ]
  },
  "references-count": 75,
  "journal-issue": {
    "issue": "2",
    "published-print": {
      "date-parts": [
        [
          1991
        ]
      ]
    }
  },
  "alternative-id": [
    "S0007850607611342"
  ],
  "URL": "http://dx.doi.org/10.1016/S0007-8506(07)61134-2",
  "relation": {},
  "ISSN": [
    "0007-8506"
  ],
  "subject": [],
  "container-title-short": "CIRP Annals",
  "published": {
    "date-parts": [
      [
        1991
      ]
    ]
  }
}