Crossref journal-article
Springer Science and Business Media LLC
Metallurgical and Materials Transactions A (297)
Bibliography

Engler, O., Huh, M.-Y., & Tomé, C. N. (2005). Crystal-plasticity analysis of ridging in ferritic stainless steel sheets. Metallurgical and Materials Transactions A, 36(11), 3127–3139.

Authors 3
  1. Olaf Engler (first)
  2. Moo-Young Huh (additional)
  3. Carlos N. Tomé (additional)
References 26 Referenced 41
  1. H.C. Chao: Trans. ASM, 1967, vol. 60, pp. 37–50. / Trans. ASM by H.C. Chao (1967)
  2. R.N. Wright: Metall. Trans., 1972, vol. 3, pp. 83–91. (10.1007/BF02680588) / Metall. Trans. by R.N. Wright (1972)
  3. H. Takechi, H. Kato, T. Sunami, and T. Nakayama: Trans. JIM, 1967, vol. 31, pp. 717–23. / Trans. JIM by H. Takechi (1967)
  4. T. Sheppard and P. Richards: Mater. Sci. Technol., 1986, vol. 2, pp. 693–99. (10.1179/mst.1986.2.7.693) / Mater. Sci. Technol. by T. Sheppard (1986)
  5. J.A. Salsgiver, J.M. Larsen, and P.R. Borneman: Recrystallization ’90, T. Chandra, ed., TMS, Warrendale PA, 1990, pp. 849–54. / Recrystallization ’90 by J.A. Salsgiver (1990)
  6. H.M. Kim and J.A. Szpunar: Mater. Sci. Forum, 1994, vols. 157–162, pp. 753–60. (10.4028/www.scientific.net/MSF.157-162.753) / Mater. Sci. Forum by H.M. Kim (1994)
  7. D. Raabe and K. Lücke: Mater. Sci. Technol., 1993, vol. 9, pp. 302–12. (10.1179/mst.1993.9.4.302) / Mater. Sci. Technol. by D. Raabe (1993)
  8. Y. Shimizu, Y. Ito, and Y. Iida: Metall. Trans. A, 1986, vol. 17A, pp. 1323–34. (10.1007/BF02650113) / Metall. Trans. A by Y. Shimizu (1986)
  9. N. Tsuji, K. Tsuzaki, and T. Maki: Iron Steel Inst. Jpn. Int., 1994, vol. 34, pp. 1008–17. (10.2355/isijinternational.34.1008) / Iron Steel Inst. Jpn. Int. by N. Tsuji (1994)
  10. H.-G. Appel and H. Becker: Z. Metallkd., 1963, vol. 54, pp. 724–28. / Z. Metallkd. by H.-G. Appel (1963)
  11. M. Arakawa, S. Takemura, and T. Ooka: Trans. Iron Steel Inst. Jpn., 1971, vol. 11, pp. 890–94. / Trans. Iron Steel Inst. Jpn. by M. Arakawa (1971)
  12. M.Y. Huh and O. Engler: Mater. Sci. Eng. A, 2001, vol. A308, pp. 74–87. (10.1016/S0921-5093(00)01995-X) / Mater. Sci. Eng. A by M.Y. Huh (2001)
  13. M.Y. Huh, J.H. Lee, S.H. Park, O. Engler, and D. Raabe: Steel Res. Int., 2005, in press.
  14. V. Randle and O. Engler: Introduction to Texture Analysis: Macrotexture, Microtexture and Orientation Mapping, Gordon and Breach Science Publishers, Amsterdam, 2000. (10.1201/9781482287479) / Introduction to Texture Analysis: Macrotexture, Microtexture and Orientation Mapping by V. Randle (2000)
  15. K. Bethke, M. Hölscher, and K. Lücke: Mater. Sci. Forum, 1994, vols. 157–162, pp. 1137–44. (10.4028/www.scientific.net/MSF.157-162.1137) / Mater. Sci. Forum by K. Bethke (1994)
  16. M. Brochu, T. Yokota, and S. Satoh: Iron Steel Inst. Jpn. Int., 1997, vol. 37, pp. 872–77. (10.2355/isijinternational.37.872) / Iron Steel Inst. Jpn. Int. by M. Brochu (1997)
  17. S.H. Park, W.Y. Kim, Y.D. Lee, and C.G. Park: Iron Steel Inst. Jpn. Int., 2002, vol. 42, pp. 100–05. (10.2355/isijinternational.42.100) / Iron Steel Inst. Jpn. Int. by S.H. Park (2002)
  18. H.J. Shin, J.K. An, S.H. Park, and D.N. Lee: Acta Mater., 2003, vol. 51, pp. 4693–4706. (10.1016/S1359-6454(03)00187-3) / Acta Mater. by H.J. Shin (2003)
  19. A.J. Beaudoin, J.D. Bryant, and D.A. Korzekwa: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2323–31. (10.1007/s11661-998-0109-y) / Metall. Mater. Trans. A by A.J. Beaudoin (1998)
  20. D. Raabe, M. Sachtleber, H. Weiland, G. Scheele, and Z. Zhao: Acta Mater., 2003, vol. 51, pp. 1539–60. (10.1016/S1359-6454(02)00557-8) / Acta Mater. by D. Raabe (2003)
  21. P.D. Wu, D.J. Lloyd, A. Bosland, H. Jin, and S.R. MacEwen: Acta Mater., 2003, vol. 51, pp. 1945–57. (10.1016/S1359-6454(02)00600-6) / Acta Mater. by P.D. Wu (2003)
  22. Z. Zhao, R. Radovitzky, and A. Cuitiño: Acta Mater., 2004, vol. 52, pp. 5791–5804. (10.1016/j.actamat.2004.08.037) / Acta Mater. by Z. Zhao (2004)
  23. R.D. Knutsen and N.J. Wittridge, Mater. Sci. Technol., 2002, vol. 18, pp. 1279–85. (10.1179/026708302225007457) / Mater. Sci. Technol. by R.D. Knutsen (2002)
  24. R.A. Lebensohn and C.N. Tomé: Acta Metall. Mater., 1993, vol. 41, pp. 2611–24. (10.1016/0956-7151(93)90130-K) / Acta Metall. Mater. by R.A. Lebensohn (1993)
  25. C.N. Tomé and R.A. Lebensohn: in Continuum Scale Simulation of Engineering Materials: Fundamentals, Microstructures, Process Applications, D. Raabe, F. Roters, F. Barlat, and L.Q. Chen, eds., Wiley-VCH, Weinheim, Germany, 2004, pp. 473–99. (10.1002/3527603786.ch23) / Continuum Scale Simulation of Engineering Materials: Fundamentals, Microstructures, Process Applications by C.N. Tomé (2004)
  26. C.N. Tomé: Model. Simul. Mater. Sci. Eng., 1999, vol. 7, pp. 723–38. (10.1088/0965-0393/7/5/305) / Model. Simul. Mater. Sci. Eng. by C.N. Tomé (1999)
Dates
Type When
Created 18 years, 4 months ago (April 4, 2007, 9:40 p.m.)
Deposited 2 years, 3 months ago (May 17, 2023, 7:04 a.m.)
Indexed 1 year ago (Aug. 12, 2024, 9:17 a.m.)
Issued 19 years, 9 months ago (Nov. 1, 2005)
Published 19 years, 9 months ago (Nov. 1, 2005)
Published Print 19 years, 9 months ago (Nov. 1, 2005)
Funders 0

None

@article{Engler_2005, title={Crystal-plasticity analysis of ridging in ferritic stainless steel sheets}, volume={36}, ISSN={1543-1940}, url={http://dx.doi.org/10.1007/s11661-005-0084-5}, DOI={10.1007/s11661-005-0084-5}, number={11}, journal={Metallurgical and Materials Transactions A}, publisher={Springer Science and Business Media LLC}, author={Engler, Olaf and Huh, Moo-Young and Tomé, Carlos N.}, year={2005}, month=nov, pages={3127–3139} }