DOI: 10.1007/s00163-004-0055-7. Life-cycle modeling for adaptive and variant design. Part 1: Methodology

Life-cycle modeling for adaptive and variant design. Part 1: Methodology

10.1007/s00163-004-0055-7

Crossref journal-article

Springer Science and Business Media LLC

Research in Engineering Design (297)

Bibliography

Fitch, P., & Cooper, J. S. (2005). Life-cycle modeling for adaptive and variant design. Part 1: Methodology. Research in Engineering Design, 15(4), 216â228.

Authors 2

Peder Fitch (first)
Joyce Smith Cooper (additional)

References 42 Referenced 23

Ashby M (1999) Materials selection in mechanical design. Butterworth-Heinemann, Boston / Materials selection in mechanical design by M Ashby (1999)
Azapagic A, Clift R (1999) Life cycle assessment and multiobjective optimisation. J Cleaner Production 7:135?143 (10.1016/S0959-6526(98)00051-1) / J Cleaner Production by A Azapagic (1999)
Barton JA, Love DM (2000) Design decision chains as a basis for design analysis. J Eng Des 11:283?297 (10.1080/095448200750021030) / J Eng Des by JA Barton (2000)
Booker JD (2001) Designing capable and reliable products. Butterworth Heinemann, Boston / Designing capable and reliable products by JD Booker (2001)
Borg JC, Yan X, Juster NP (2000) Exploring decisions? influence on life-cycle performance to aid ?design for multi-X. Artif Intell Eng Des Anal Manufact 14:91?113 (10.1017/S0890060400142015) / Artif Intell Eng Des Anal Manufact by JC Borg (2000)
Borland N, Wallace D, Kaufmann HP (1998) Integrating environmental impact assessment into product design. Proceedings of 1998 ASME design engineering technical conference, Atlanta, pp 13?16 (10.1115/DETC98/DFM-5730)
Bras, B (1997) Incorporating environmental issues in product design and realization. Ind Environ 20:7?13 / Ind Environ by B Bras (1997)
Brown RJ, Yanuck RR (1985) Introduction of life cycle costing.Prentice-Hall, Englewood Cliffs / Introduction of life cycle costing by RJ Brown (1985)
Cacuci DG (2003) Sensitivity and uncertainty analysis. Chapman and Hall, Boca Raton (10.1201/9780203498798) / Sensitivity and uncertainty analysis by DG Cacuci (2003)
Cooper JS (2003) Specifying functional units and reference flows for comparable alternatives. Int J Life Cycle Assess 8:337?349 (10.1007/BF02978507) / Int J Life Cycle Assess by JS Cooper (2003)
Curran MA (1996) Life cycle assessment. McGraw-Hill, New York / Life cycle assessment by MA Curran (1996)
Davis J (1991) The potential for vehicle weight reduction using magnesium. Society of Automotive Engineers, SAE#910551 (10.4271/910551)
Eisenhard JL, Wallace DR, Sousa I, De Schepper MS, Rombouts JP (2000) Approximate life-cycle assessment in conceptual product design. Proceedings of ASME 2000 Design engineering technical conferences and computers and information in engineering conference, September 10?13, Baltimore (10.1115/DETC2000/DFM-14026)
Fabryck WJ, Blanchard BS (1991) Life-cycle cost and economic analysis. Prentice-Hall, New Jersey / Life-cycle cost and economic analysis by WJ Fabryck (1991)
Fitch PE (2004) Design forecasting: a method for performing dfx analyses in complex product design. Ph.D. Dissertation in Mechanical Engineering, University of Washington / Design by Fitch (2004)
Fitch PE, Cooper JS (2004) Life cycle energy analysis as a method for material selection. J Mech Des (in press) (10.1115/1.1767821)
Ford Motor Company (1988) Failure mode and effects analysis handbook. Dearborne, Michigan
Graedel TE, Allenby BR (1996) Design for environment. Prentice Hall, New Jersey / Design for environment by TE Graedel (1996)
Hauser J, Clausing D (1988) ?The house of quality,? Harvard Business Review, pp 63?73
Hinckley CM (1994) A global conformance quality model: a new strategic tool for minimizing defects caused by variation, error, and complexity. Ph.D. Dissertation in Mechanical Engineering, Stanford University / A global conformance quality by Hinckley (1994)
ISO (International Standards Organization) (1997) ISO14040: life cycle assessment?principles and framework
ISO (International Standards Organization) (1998) Environmental management? life cycle assessment?goal and scope definition and inventory analysis, ISO14041?1998 (E)
Ishii K (1998) Design for manufacturability: product definition. Course notes for ME217A in Department of Mechanical Engineering, Stanford University / Design for by Ishii (1998)
Jackson P, Wallace DR (1997) A modular method for representing product life-cycles. Proceedings of the 1997 ASME design engineering technical conferences, Sacramento, pp 14?17 (10.1115/DETC97/DFM-4344)
Kalyan-Seshu U, Bras B (1998) Integrating DFX tools with computer-aided design systems. Proceedings of the 1998 ASME design engineering technical conferences, Atlanta, pp 13?16 (10.1115/DETC98/DAC-5621)
Klöpffer W, Hutzinger O (1997) LCA documents: life cycle assessment: state-of-the-art and research priorities. Eco-Informa, Bayreuth / LCA documents: life cycle assessment: state-of-the-art and research priorities by W Klöpffer (1997)
Nielsen PH, Wenzel H (2002) Integration of environmental aspects in product development: a stepwise procedure based on quantitative life cycle assessment. J Cleaner Production 10:247?257 (10.1016/S0959-6526(01)00038-5) / J Cleaner Production by PH Nielsen (2002)
Otto KN, Wood KL (2001) Product design: techniques in reverse engineering and new product development. Prentice Hall, New Jersey / Product design: techniques in reverse engineering and new product development by KN Otto (2001)
Pahl G, Beitz W (2001) Engineering design: a systematic approach. Springer, New York / Engineering design: a systematic approach by G Pahl (2001)
Pugh S (1991) Total design: integrated methods for successful product engineering. Addison-Wesley, Reading / Total design: integrated methods for successful product engineering by S Pugh (1991)
Pugh S (1996) Creating innovative products using total design. Addison-Wesley, Reading / Creating innovative products using total design by S Pugh (1996)
Regnier E, Hoffman III WF (1998) Uncertainty model for product environmental performance scoring. 1998 IEEE international symposium on electronics and the environment, Oak Brook
Saaty TL (1980) The analytic hierarch process: planning, priority setting, resource allocation. McGraw-Hill, New York / The analytic hierarch process: planning, priority setting, resource allocation by TL Saaty (1980)
Saaty TL (1995) Decision Making for Leaders. Lifetime Learning, Belmont / Decision making for leaders by TL Saaty (1995)
Saltelli A, Chan K, Scott EM (2000) Sensitivity analysis. Wiley, Chichester / Sensitivity analysis by A Saltelli (2000)
Seiford LM, Thrall RM (1990) Recent developments in DEA the mathematical programming approach to frontier analysis. J Econom 26: 7?38 (10.1016/0304-4076(90)90045-U) / J Econom by LM Seiford (1990)
SETAC (Society of Environmental Toxicology and Chemistry) (1991) Guidelines for life cycle assessment: a code of practice. Brussels / Guidelines for life cycle by SETAC (1991)
SAWE (Society of Allied Weight Engineers) (1996) Introduction to aircraft weight engineering. Los Angeles
Stamatis D (1995) Failure mode and effects analysis: FMEA from theory to execution. ASQC Quality, Milwaukee / Failure mode and effects analysis: FMEA from theory to execution by D Stamatis (1995)
Sullivan JL, Williams RL, Yester S, Cobas-Flores E, Chubbs ST, Hentges SG, Pomper SD (1998) Life cycle inventory of a generic US family sedan: overview of results USCAR AMP project, Society of Automotive Engineers, SAE#982160 / Life cycle inventory of a generic US family by Sullivan (1998)
Ullman DG (1997) The mechanical design process. McGraw-Hill, New York / The mechanical design process by DG Ullman (1997)
Umeda Y, Nonomura A, Tomiyana T (2000) Study on life-cycle design for the post mass production paradigm. Artif Intell Eng Des Anal Manufact 14:149?161 (10.1017/S0890060400142040) / Artif Intell Eng Des Anal Manufact by Y Umeda (2000)

Dates

Type	When
Created	20 years, 7 months ago (Jan. 27, 2005, 7:13 a.m.)
Deposited	2 years, 3 months ago (May 1, 2023, 4:26 p.m.)
Indexed	1 year, 2 months ago (June 11, 2024, 10:51 p.m.)
Issued	20 years, 7 months ago (Jan. 28, 2005)
Published	20 years, 7 months ago (Jan. 28, 2005)
Published Online	20 years, 7 months ago (Jan. 28, 2005)
Published Print	20 years, 5 months ago (March 1, 2005)

Funders 0

None

BibTeX

@article{Fitch_2005, title={Life-cycle modeling for adaptive and variant design. Part 1: Methodology}, volume={15}, ISSN={1435-6066}, url={http://dx.doi.org/10.1007/s00163-004-0055-7}, DOI={10.1007/s00163-004-0055-7}, number={4}, journal={Research in Engineering Design}, publisher={Springer Science and Business Media LLC}, author={Fitch, Peder and Cooper, Joyce Smith}, year={2005}, month=jan, pages={216–228} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2024,
        6,
        12
      ]
    ],
    "date-time": "2024-06-12T02:51:52Z",
    "timestamp": 1718160712235
  },
  "reference-count": 42,
  "publisher": "Springer Science and Business Media LLC",
  "issue": "4",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            2005,
            1,
            28
          ]
        ],
        "date-time": "2005-01-28T00:00:00Z",
        "timestamp": 1106870400000
      },
      "content-version": "tdm",
      "delay-in-days": 0,
      "URL": "http://www.springer.com/tdm"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        2005,
        3
      ]
    ]
  },
  "DOI": "10.1007/s00163-004-0055-7",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2005,
        1,
        27
      ]
    ],
    "date-time": "2005-01-27T12:13:46Z",
    "timestamp": 1106828026000
  },
  "page": "216-228",
  "source": "Crossref",
  "is-referenced-by-count": 23,
  "title": "Life-cycle modeling for adaptive and variant design. Part 1: Methodology",
  "prefix": "10.1007",
  "volume": "15",
  "author": [
    {
      "given": "Peder",
      "family": "Fitch",
      "sequence": "first",
      "affiliation": []
    },
    {
      "given": "Joyce Smith",
      "family": "Cooper",
      "sequence": "additional",
      "affiliation": []
    }
  ],
  "member": "297",
  "published-online": {
    "date-parts": [
      [
        2005,
        1,
        28
      ]
    ]
  },
  "reference": [
    {
      "key": "CR1",
      "volume-title": "Materials selection in mechanical design",
      "author": "M Ashby",
      "year": "1999",
      "unstructured": "Ashby M (1999) Materials selection in mechanical design. Butterworth-Heinemann, Boston"
    },
    {
      "key": "CR2",
      "doi-asserted-by": "crossref",
      "first-page": "135",
      "DOI": "10.1016/S0959-6526(98)00051-1",
      "volume": "7",
      "author": "A Azapagic",
      "year": "1999",
      "unstructured": "Azapagic A, Clift R (1999) Life cycle assessment and multiobjective optimisation. J Cleaner Production 7:135?143",
      "journal-title": "J Cleaner Production"
    },
    {
      "key": "CR3",
      "doi-asserted-by": "crossref",
      "first-page": "283",
      "DOI": "10.1080/095448200750021030",
      "volume": "11",
      "author": "JA Barton",
      "year": "2000",
      "unstructured": "Barton JA, Love DM (2000) Design decision chains as a basis for design analysis. J Eng Des 11:283?297",
      "journal-title": "J Eng Des"
    },
    {
      "key": "CR4",
      "volume-title": "Designing capable and reliable products",
      "author": "JD Booker",
      "year": "2001",
      "unstructured": "Booker JD (2001) Designing capable and reliable products. Butterworth Heinemann, Boston"
    },
    {
      "key": "CR5",
      "doi-asserted-by": "crossref",
      "first-page": "91",
      "DOI": "10.1017/S0890060400142015",
      "volume": "14",
      "author": "JC Borg",
      "year": "2000",
      "unstructured": "Borg JC, Yan X, Juster NP (2000) Exploring decisions? influence on life-cycle performance to aid ?design for multi-X. Artif Intell Eng Des Anal Manufact 14:91?113",
      "journal-title": "Artif Intell Eng Des Anal Manufact"
    },
    {
      "key": "CR6",
      "doi-asserted-by": "crossref",
      "unstructured": "Borland N, Wallace D, Kaufmann HP (1998) Integrating environmental impact assessment into product design. Proceedings of 1998 ASME design engineering technical conference, Atlanta, pp 13?16",
      "DOI": "10.1115/DETC98/DFM-5730"
    },
    {
      "key": "CR7",
      "first-page": "7",
      "volume": "20",
      "author": "B Bras",
      "year": "1997",
      "unstructured": "Bras, B (1997) Incorporating environmental issues in product design and realization. Ind Environ 20:7?13",
      "journal-title": "Ind Environ"
    },
    {
      "key": "CR8",
      "volume-title": "Introduction of life cycle costing",
      "author": "RJ Brown",
      "year": "1985",
      "unstructured": "Brown RJ, Yanuck RR (1985) Introduction of life cycle costing.Prentice-Hall, Englewood Cliffs"
    },
    {
      "key": "CR9",
      "doi-asserted-by": "crossref",
      "DOI": "10.1201/9780203498798",
      "volume-title": "Sensitivity and uncertainty analysis",
      "author": "DG Cacuci",
      "year": "2003",
      "unstructured": "Cacuci DG (2003) Sensitivity and uncertainty analysis. Chapman and Hall, Boca Raton"
    },
    {
      "key": "CR10",
      "doi-asserted-by": "crossref",
      "first-page": "337",
      "DOI": "10.1007/BF02978507",
      "volume": "8",
      "author": "JS Cooper",
      "year": "2003",
      "unstructured": "Cooper JS (2003) Specifying functional units and reference flows for comparable alternatives. Int J Life Cycle Assess 8:337?349",
      "journal-title": "Int J Life Cycle Assess"
    },
    {
      "key": "CR11",
      "volume-title": "Life cycle assessment",
      "author": "MA Curran",
      "year": "1996",
      "unstructured": "Curran MA (1996) Life cycle assessment. McGraw-Hill, New York"
    },
    {
      "key": "CR12",
      "doi-asserted-by": "crossref",
      "unstructured": "Davis J (1991) The potential for vehicle weight reduction using magnesium. Society of Automotive Engineers, SAE#910551",
      "DOI": "10.4271/910551"
    },
    {
      "key": "CR13",
      "doi-asserted-by": "crossref",
      "unstructured": "Eisenhard JL, Wallace DR, Sousa I, De Schepper MS, Rombouts JP (2000) Approximate life-cycle assessment in conceptual product design. Proceedings of ASME 2000 Design engineering technical conferences and computers and information in engineering conference, September 10?13, Baltimore",
      "DOI": "10.1115/DETC2000/DFM-14026"
    },
    {
      "key": "CR14",
      "volume-title": "Life-cycle cost and economic analysis",
      "author": "WJ Fabryck",
      "year": "1991",
      "unstructured": "Fabryck WJ, Blanchard BS (1991) Life-cycle cost and economic analysis. Prentice-Hall, New Jersey"
    },
    {
      "key": "CR15",
      "first-page": "a",
      "volume": "forecasting",
      "author": "Fitch",
      "year": "2004",
      "unstructured": "Fitch PE (2004) Design forecasting: a method for performing dfx analyses in complex product design. Ph.D. Dissertation in Mechanical Engineering, University of Washington",
      "journal-title": "Design"
    },
    {
      "key": "CR16",
      "doi-asserted-by": "crossref",
      "unstructured": "Fitch PE, Cooper JS (2004) Life cycle energy analysis as a method for material selection. J Mech Des (in press)",
      "DOI": "10.1115/1.1767821"
    },
    {
      "key": "CR17",
      "unstructured": "Ford Motor Company (1988) Failure mode and effects analysis handbook. Dearborne, Michigan"
    },
    {
      "key": "CR18",
      "volume-title": "Design for environment",
      "author": "TE Graedel",
      "year": "1996",
      "unstructured": "Graedel TE, Allenby BR (1996) Design for environment. Prentice Hall, New Jersey"
    },
    {
      "key": "CR19",
      "unstructured": "Hauser J, Clausing D (1988) ?The house of quality,? Harvard Business Review, pp 63?73"
    },
    {
      "key": "CR20",
      "first-page": "a",
      "volume": "model",
      "author": "Hinckley",
      "year": "1994",
      "unstructured": "Hinckley CM (1994) A global conformance quality model: a new strategic tool for minimizing defects caused by variation, error, and complexity. Ph.D. Dissertation in Mechanical Engineering, Stanford University",
      "journal-title": "A global conformance quality"
    },
    {
      "key": "CR21",
      "unstructured": "ISO (International Standards Organization) (1997) ISO14040: life cycle assessment?principles and framework"
    },
    {
      "key": "CR22",
      "unstructured": "ISO (International Standards Organization) (1998) Environmental management? life cycle assessment?goal and scope definition and inventory analysis, ISO14041?1998 (E)"
    },
    {
      "key": "CR23",
      "first-page": "product",
      "volume": "manufacturabili",
      "author": "Ishii",
      "year": "1998",
      "unstructured": "Ishii K (1998) Design for manufacturability: product definition. Course notes for ME217A in Department of Mechanical Engineering, Stanford University",
      "journal-title": "Design for"
    },
    {
      "key": "CR24",
      "doi-asserted-by": "crossref",
      "unstructured": "Jackson P, Wallace DR (1997) A modular method for representing product life-cycles. Proceedings of the 1997 ASME design engineering technical conferences, Sacramento, pp 14?17",
      "DOI": "10.1115/DETC97/DFM-4344"
    },
    {
      "key": "CR25",
      "doi-asserted-by": "crossref",
      "unstructured": "Kalyan-Seshu U, Bras B (1998) Integrating DFX tools with computer-aided design systems. Proceedings of the 1998 ASME design engineering technical conferences, Atlanta, pp 13?16",
      "DOI": "10.1115/DETC98/DAC-5621"
    },
    {
      "key": "CR26",
      "volume-title": "LCA documents: life cycle assessment: state-of-the-art and research priorities",
      "author": "W Kl\u00f6pffer",
      "year": "1997",
      "unstructured": "Kl\u00f6pffer W, Hutzinger O (1997) LCA documents: life cycle assessment: state-of-the-art and research priorities. Eco-Informa, Bayreuth"
    },
    {
      "key": "CR27",
      "doi-asserted-by": "crossref",
      "first-page": "247",
      "DOI": "10.1016/S0959-6526(01)00038-5",
      "volume": "10",
      "author": "PH Nielsen",
      "year": "2002",
      "unstructured": "Nielsen PH, Wenzel H (2002) Integration of environmental aspects in product development: a stepwise procedure based on quantitative life cycle assessment. J Cleaner Production 10:247?257",
      "journal-title": "J Cleaner Production"
    },
    {
      "key": "CR28",
      "volume-title": "Product design: techniques in reverse engineering and new product development",
      "author": "KN Otto",
      "year": "2001",
      "unstructured": "Otto KN, Wood KL (2001) Product design: techniques in reverse engineering and new product development. Prentice Hall, New Jersey"
    },
    {
      "key": "CR29",
      "volume-title": "Engineering design: a systematic approach",
      "author": "G Pahl",
      "year": "2001",
      "unstructured": "Pahl G, Beitz W (2001) Engineering design: a systematic approach. Springer, New York"
    },
    {
      "key": "CR30",
      "volume-title": "Total design: integrated methods for successful product engineering",
      "author": "S Pugh",
      "year": "1991",
      "unstructured": "Pugh S (1991) Total design: integrated methods for successful product engineering. Addison-Wesley, Reading"
    },
    {
      "key": "CR31",
      "volume-title": "Creating innovative products using total design",
      "author": "S Pugh",
      "year": "1996",
      "unstructured": "Pugh S (1996) Creating innovative products using total design. Addison-Wesley, Reading"
    },
    {
      "key": "CR32",
      "unstructured": "Regnier E, Hoffman III WF (1998) Uncertainty model for product environmental performance scoring. 1998 IEEE international symposium on electronics and the environment, Oak Brook"
    },
    {
      "key": "CR33",
      "volume-title": "The analytic hierarch process: planning, priority setting, resource allocation",
      "author": "TL Saaty",
      "year": "1980",
      "unstructured": "Saaty TL (1980) The analytic hierarch process: planning, priority setting, resource allocation. McGraw-Hill, New York"
    },
    {
      "key": "CR34",
      "volume-title": "Decision making for leaders",
      "author": "TL Saaty",
      "year": "1995",
      "unstructured": "Saaty TL (1995) Decision Making for Leaders. Lifetime Learning, Belmont"
    },
    {
      "key": "CR35",
      "volume-title": "Sensitivity analysis",
      "author": "A Saltelli",
      "year": "2000",
      "unstructured": "Saltelli A, Chan K, Scott EM (2000) Sensitivity analysis. Wiley, Chichester"
    },
    {
      "key": "CR36",
      "doi-asserted-by": "crossref",
      "first-page": "7",
      "DOI": "10.1016/0304-4076(90)90045-U",
      "volume": "26",
      "author": "LM Seiford",
      "year": "1990",
      "unstructured": "Seiford LM, Thrall RM (1990) Recent developments in DEA the mathematical programming approach to frontier analysis. J Econom 26: 7?38",
      "journal-title": "J Econom"
    },
    {
      "key": "CR37",
      "first-page": "a",
      "volume": "assessment",
      "author": "SETAC",
      "year": "1991",
      "unstructured": "SETAC (Society of Environmental Toxicology and Chemistry) (1991) Guidelines for life cycle assessment: a code of practice. Brussels",
      "journal-title": "Guidelines for life cycle"
    },
    {
      "key": "CR38",
      "unstructured": "SAWE (Society of Allied Weight Engineers) (1996) Introduction to aircraft weight engineering. Los Angeles"
    },
    {
      "key": "CR39",
      "volume-title": "Failure mode and effects analysis: FMEA from theory to execution",
      "author": "D Stamatis",
      "year": "1995",
      "unstructured": "Stamatis D (1995) Failure mode and effects analysis: FMEA from theory to execution. ASQC Quality, Milwaukee"
    },
    {
      "key": "CR40",
      "first-page": "overview",
      "volume": "sedan",
      "author": "Sullivan",
      "year": "1998",
      "unstructured": "Sullivan JL, Williams RL, Yester S, Cobas-Flores E, Chubbs ST, Hentges SG, Pomper SD (1998) Life cycle inventory of a generic US family sedan: overview of results USCAR AMP project, Society of Automotive Engineers, SAE#982160",
      "journal-title": "Life cycle inventory of a generic US family"
    },
    {
      "key": "CR41",
      "volume-title": "The mechanical design process",
      "author": "DG Ullman",
      "year": "1997",
      "unstructured": "Ullman DG (1997) The mechanical design process. McGraw-Hill, New York"
    },
    {
      "key": "CR42",
      "doi-asserted-by": "crossref",
      "first-page": "149",
      "DOI": "10.1017/S0890060400142040",
      "volume": "14",
      "author": "Y Umeda",
      "year": "2000",
      "unstructured": "Umeda Y, Nonomura A, Tomiyana T (2000) Study on life-cycle design for the post mass production paradigm. Artif Intell Eng Des Anal Manufact 14:149?161",
      "journal-title": "Artif Intell Eng Des Anal Manufact"
    }
  ],
  "container-title": "Research in Engineering Design",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "http://link.springer.com/content/pdf/10.1007/s00163-004-0055-7.pdf",
      "content-type": "application/pdf",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "http://link.springer.com/article/10.1007/s00163-004-0055-7/fulltext.html",
      "content-type": "text/html",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "http://link.springer.com/content/pdf/10.1007/s00163-004-0055-7",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "similarity-checking"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2023,
        5,
        1
      ]
    ],
    "date-time": "2023-05-01T20:26:20Z",
    "timestamp": 1682972780000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "http://link.springer.com/10.1007/s00163-004-0055-7"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        2005,
        1,
        28
      ]
    ]
  },
  "references-count": 42,
  "journal-issue": {
    "issue": "4",
    "published-print": {
      "date-parts": [
        [
          2005,
          3
        ]
      ]
    }
  },
  "alternative-id": [
    "55"
  ],
  "URL": "http://dx.doi.org/10.1007/s00163-004-0055-7",
  "relation": {},
  "ISSN": [
    "0934-9839",
    "1435-6066"
  ],
  "subject": [],
  "container-title-short": "Res Eng Design",
  "published": {
    "date-parts": [
      [
        2005,
        1,
        28
      ]
    ]
  }
}