DOI: 10.1007/bf03222405. The case for ultrahigh-carbon steels as structural materials

The case for ultrahigh-carbon steels as structural materials

10.1007/bf03222405

Crossref journal-article

Springer Science and Business Media LLC

JOM (297)

Bibliography

Lesuer, D. R., Syn, C. K., Goldberg, A., Wadsworth, J., & Sherby, O. D. (1993). The case for ultrahigh-carbon steels as structural materials. JOM, 45(8), 40â46.

Authors 5

D. R. Lesuer (first)
C. K. Syn (additional)
A. Goldberg (additional)
J. Wadsworth (additional)
O. D. Sherby (additional)

References 82 Referenced 44

O.D. Sherby et al., “Superplastic UHCSs,” Scripta Met., 9, (1975), pp. 569–574. / JOM by O.D. Sherby (1975)
B. Walser, E.S. Kayali, and O.D. Sherby, “Warm Working and Superplasticity in Plain UHCS,” 4th Intl. Conf. on Strength of Metals and Alloys, vol. 1 (August 1976), pp. 266–270. / JOM by B. Walser (1976)
O.D. Sherby et al. “Superplastic UHCSs,” U.S. Patent 3,951,697 (20 April 1976).
O.D. Sherby et al., “A Summary Report on Superplastic UHCS,” Stanford University, Final Report DAHC-15-73-G15 (February 1977). / A Summary Report on Superplastic UHCS / Stanford University, Final Report DAHC-15-73-G15 by O.D. Sherby (1977)
O.D. Sherby et al., “A Summary Report on Superplastic UHCS,” Stanford University, Final Report ONR-N00014-17-C-0149 (June 1980). / A Summary Report on Superplastic UHCS / Stanford University, Final Report ONR-N00014-17-C-0149 by O.D. Sherby (1980)
H.M. Howe, The Metallurgy of Steel, vol. 1, 2nd ed. (New York: Scientific Publishing Company, 1891), p. 16. / The Metallurgy of Steel by H.M. Howe (1891)
H. Carpenter and J.M. Robertson, Metals, vol. II (London: Oxford University Press, 1939), p. 1081. / Metals by H. Carpenter (1939)
A.H. Cottrell, An Introduction to Metallurgy (London: Edward Arnold Publishers, 1967), p. 511. / An Introduction to Metallurgy by A.H. Cottrell (1967)
M.F. Ashby and D.R.H. Jones, Eng. Materials, vol. 2 (New York: Pergamon Press, 1986), pp. 109, 112. / Eng. Materials by M.F. Ashby (1986)
Y. Yagi, “Recent Trends and Future Tasks in Ironmaking and Steelmaking,” Proc. 19th Annual Meeting and Conf. (Brussels, Belgium: International Iron and Steel Institute, 1990).
O.D. Sherby et al., “UHCSs,” J. Metals, 37 (1985), pp. 50–56. (10.1007/BF03257713) / JOM by O.D. Sherby (1985)
O.D. Sherby, “Damascus Steels Rediscovered?” Trans. Iron and Steel Inst. Japan, 19 (1979), pp. 381–390; also in J. Iron and Steel Inst. Japan, 66 (1980), pp. 282–292. / JOM by O.D. Sherby (1979)
O.D. Sherby and J. Wadsworth, “On the Bulat (Damascus Steels),” Bull. Metals Museum, 4 (1979), pp. 7–23. / JOM by O.D. Sherby (1979)
J. Wadsworth and O.D. Sherby, “On the Bulat—Damascus Steels Revisited,” Prog. Matls Sci., 25 (1980), pp. 35–68. / JOM by J. Wadsworth (1980)
J. Wadsworth and O.D. Sherby, “Damascus Steel-Making,” Science, 218 (1982), pp. 328–329. / JOM by J. Wadsworth (1982)
J. Wadsworth and O.D. Sherby, “Influence of Nickel and Vanadium on Superplasticity in UHCSs,” J. Mech. Work. Technol., 2 (1978), pp. 53–66. / JOM by J. Wadsworth (1978)
J. Wadsworth and O.D. Sherby, “Influence of Chromium on Superplasticity in UHCSs,” J. Matls. Sci., 13 (1978), pp. 2645–2649. / JOM by J. Wadsworth (1978)
T. Oyama et al., “Influence of Dilute Alloying Addition on the Superplastic Properties of UHCSs,” 5th Intl. Conf. on Strength of Metals and Alloys, vol. 1 (August 1979), pp. 381–386. / JOM by T. Oyama (1979)
B. Walser and O.D. Sherby, “Mechanical Behavior of Superplastic UHCSs at Elevated Temperature,” Met. Trans., 10A (1979), pp. 1461–1471. / JOM by B. Walser (1979)
E.S. Kayali et al., “The Development of Fine Structure Superplasticity in Cast UHCSs Through Thermal Cycling,” J. Matls. Sci., 14 (1979), pp. 2688–2692. / JOM by E.S. Kayali (1979)
J. Wadsworth, J.H. Lin, and O.D. Sherby, “Superplasticity in a Tool Steel,” Metals Technol., 5 (1981), pp. 190–193. / JOM by J. Wadsworth (1981)
T. Oyama et al., “Development of UHCSs for Transport. Applications,” Stanford University, Final Report DTRS-5680-C-00031 (July 1980–June 1983).
H. Sunada et al., “Mechanical Properties and Microstructure of Heat Treated UHCSs,” Matls. Sci. Eng., 38 (1979), pp. 35–40. / JOM by H. Sunada (1979)
O.D. Sherby et al., “Superplastic Bonding of Ferrous Laminates,” Scripta Met., 13 (1979), pp. 941–946. / JOM by O.D. Sherby (1979)
B.C. Snyder, “Superplasticity in Ferrous Laminated Composites,” Ph.D. Dissertation, Stanford University (1984). / Superplasticity in Ferrous Laminated Composites by B.C. Snyder (1984)
B.C. Snyder, J. Wadsworth, and O.D. Sherby, “Superplastic Behavior in Ferrous Laminated Composites,” Acta Met., 32 (1984), pp. 919–932. / JOM by B.C. Snyder (1984)
D.W. Kum, “Structure and Mechanical Behavior of Ferrous Laminated Composites Containing UHCSs,” Ph.D. Dissertation, Stanford University (1984). / Structure and Mechanical Behavior of Ferrous Laminated Composites Containing UHCSs by D.W. Kum (1984)
T. Itoh et al., “Manufacture and Mechanical Properties of Laminated and Monolithic Fine-Grained High Carbon Superplastic Bearing Steel,” J. Mech. Work. Technol., 5 (1981), pp. 105–123. / JOM by T. Itoh (1981)
D.W. Kum et al., “The Impact Properties of Laminated Composites Containing UHCSs,” J. Mech. Phys. Solids, 31 (1983), pp. 173–186. / JOM by D.W. Kum (1983)
R.D. Caligiuri, R.T. Whalen, and O.D. Sherby, “Superplastic Hot Pressing of White Cast Iron,” Intl. J. Powd. Metall., 12 (1976), pp. 59–74. / JOM by R.D. Caligiuri (1976)
O.A. Ruano, J. Wadsworth, and O.D. Sherby, “Enhanced Densification of White Cast Iron Powders by Cyclic Phase Transformation Under Stress,” Met. Trans., 13A (1982), pp. 355–361. / JOM by O.A. Ruano (1982)
O.A. Ruano, L.E. Eiselstein, and O.D. Sherby, “Superplasticity in Rapidly Solidified White Cast Irons,” Met. Trans., 13A (1982), pp. 1785–1792. / JOM by O.A. Ruano (1982)
L.E. Eiselstein, O.A Ruano, and O.D. Sherby, “Structural Characterization of Rapidly Solidified White Cast Iron Powders,” J. Matls. Sci., 18 (1983), pp. 483–492. / JOM by L.E. Eiselstein (1983)
O.A. Ruano, L.E. Eiselstein, and O.D. Sherby, “Room Temperature Strength and Ductility of Rapidly Solidified White Cast Irons,” Powder Metall., 26 (1983), pp. 155–160. / JOM by O.A. Ruano (1983)
L.E. Eiselstein et al., “Microstructure and Mech. Prop. of Rapidly Solidified White Cast Iron Powders,” Proc. 3rd Intl. Conf. Rapid Solidification Processing (Gaithersburg, MD: National Bureau of Standards, 6–8 December 1982), pp. 245–251.
O. D. Sherby and J. Wadsworth, “Development and Characterization of Fine-Grained Superplastic Materials,” Deformation, Processing, and Structure, ed. C. Krauss (Metals Park, OH: ASM, 1984), pp. 355–389. / Deformation, Processing, and Structure by O. D. Sherby (1984)
T. Oyama et al., “Application of the DET to the Development of Fine-Grained, Spheroidized Structures in UHCSs,” Scripta Metall., 18 (1984), pp. 799–804. / JOM by T. Oyama (1984)
T. Oyama, O.D. Sherby, and J. Wadsworth, “DET Process and Product of UHCSs,” U.S. Patent 4,448,613 (15 May 1984). / DET Process and Product of UHCSs by T. Oyama (1984)
T. Oyama, “Processing and Properties of UHCSs,” Ph.D. Dissertation, Stanford University (1983). / Processing and Properties of UHCSs by T. Oyama (1983)
T. Oyama et al., “Heat Treatment of Fine-Grained UHCSs for Attainment of Strong and Ductile Materials,” Proc. 5th Gen. Assembly of CENIM.
W.B. Avery, “The Influence of Heat Treatment on the Microstructure and Properties of Fine-Grained UHCSs,” M.S. Dissertation, Stanford University (1982). / The Influence of Heat Treatment on the Microstructure and Properties of Fine-Grained UHCSs by W.B. Avery (1982)
O.D. Sherby and T. Oyama, “UHCS Alloy and Processing Thereof,” U.S. Patent No. 4,533,390 (6 August 1985). / UHCS Alloy and Processing Thereof by O.D. Sherby (1985)
O.D. Sherby et al., “UHCSs Containing Al,” U.S. Patent 4,769,214 (6 September 1988). / UHCSs Containing Al by O.D. Sherby (1988)
H. Fukuyo, “Influence of Al, Sn and Si on the Superplastic Behavior of UHCS,” Engineer Dissertation, Stanford University (June 1987). / Influence of Al, Sn and Si on the Superplastic Behavior of UHCS by H. Fukuyo (1987)
H. Fukuyo et al., “Superplasticity and Newtonian-Viscous Flow in Fine-Grained Class I Solid Solution Alloys,” ISIJ International, 31 (1991), pp. 76–85. / JOM by H. Fukuyo (1991)
H.C. Tsai, “Superplasticity in UHCSs and Their Laminates,” Ph.D. Dissertation, Stanford University (June 1990). / Superplasticity in UHCSs and Their Laminates by H.C. Tsai (1990)
D.W. Kum, H.K. Kang, and S.H. Hong, “Al Effects on the Microstructure and Superplasticity of UHCSs Processed by DETW AD,” Superplasticity in Adv. Materials, ed. S. Hori, M. Tokizane, and N. Furushiro (Osaka, Japan: Japan Society for Research on Superplasticity, June 1991), pp. 503–508. / Superplasticity in Adv. Materials by D.W. Kum (1991)
M.J. Strum, “Superplastic Steels: “Joint LLNL-Industry Research,” Energy and Technology Review (Livermore, CA: Lawrence Livermore National Lab, November 1989), pp. 18–28.
C.K. Syn, D.R. Lesuer, and O.D. Sherby, “Influence of Microstructure on the Tensile Prop. of Spheroidized UHCS,” submitted for publication in Met. Trans. A (1993).
O.D. Sherby et al., “Superplastic UHCSs,” Superplastic Forming, ed. S. Agrawal (Metals Park, OH: ASM, 1985), pp. 32–42. / Superplastic Forming by O.D. Sherby (1985)
D.W. Kum et al., “Microstructure and Superplastic Behavior of Eutectic Fe-Cr and Ni-Cr White Cast Irons,” Met. Trans., 18A (1987), pp. 1703–1711. / JOM by D.W. Kum (1987)
W.J. Kim et al., “Superplastic Behavior of Iron Carbide,” Scripta Metall., 23 (1989), pp. 1515–1520. / JOM by W.J. Kim (1989)
O.D. Sherby and J. Wadsworth, “Superplasticity in Iron-Based Alloys,” Encyclopedia of Matls. Sci. and Eng., suppl. vol. 1 (1988), pp. 519–522. / JOM by O.D. Sherby (1988)
J. Wittenauer, P. Schepp, and B. Walser, “Application of Superplastic UHC Steel for Isothermal Forging of Machine Components,” Superplasticity and Superplastic Forming, ed. C.H. Hamilton and N.E. Paton (Warrendale, PA: TMS, 1988), pp. 507–511. / Superplasticity and Superplastic Forming by J. Wittenauer (1988)
R.D. Caligiuri, L.E. Eiselstein, and O.D. Sherby, “Properties and Applications of UHCS Laminates,” 34th Sagamore Conf. on Materials, Innovations in Ultrahigh Strength Steel Technology, ed. G.B. Olson, M. Azrin and E.S. Wright (Watertown, MA: U.S. Army Materials Tech Lab, 1990), pp. 499–525. / 34th Sagamore Conf. on Materials, Innovations in Ultrahigh Strength Steel Technology by R.D. Caligiuri (1990)
O.D. Sherby, research in progress, Stanford University (1993).
O.D. Sherby and J. Wadsworth, “UHCSs,” Encyclopedia of Matls. Sci. and Eng., suppl. vol. 1 (1988), pp. 541–545. / JOM by O.D. Sherby (1988)
R.A. Grange, “Estimating the Hardenability of Carbon Steels,” Met. Trans., 4 (1973), pp. 2231–2244. / JOM by R.A. Grange (1973)
J. Wadsworth, D.W. Kum, and O.D. Sherby, “Welded Damascus Steels and a New Breed of Laminated Composites,” Met. Prog. (June 1986); also published in The Anvil’s Ring, spring issue (1987).
D.W. Kum et al., “Develop. of Ferrous Laminated Composites with Unique Microstructures by Control of Carbon Diffusion,” Met. Trans., 17A (1986), pp. 1517–1521. / JOM by D.W. Kum (1986)
G.S. Daehn, D.W. Kum, and O.D. Sherby, “Superplasticity of a Stainless Steel Clad UHCS,” Met. Trans., 17A (1986), 2295–2298. / JOM by G.S. Daehn (1986)
J. Wittenauer and O.D. Sherby, “Factors Influencing the Fatigue Behavior of Ferrous Laminates,” J. Eng. Mat. Tech., 109 (1987), pp. 244–251. / JOM by J. Wittenauer (1987)
J. Wadsworth and O.D. Sherby, “Damascus Steels,” Encyclopedia of Matls. Sci. and Eng., suppl. vol. 1 (New York: Pergamon Press, 1988), pp. 113–115.
S. Lee, J. Wadsworth, and O.D. Sherby, “Impact Properties of a Laminated Composite Based on UHCS and Hadfield Manganese Steel,” Res Mechanica, 31 (1990), pp. 233–248. / JOM by S. Lee (1990)
O.D. Sherby et al., “Multilayered Composites Based on UHCS and Brass,” Matls. and Manufact. Processes, 5 (1990), pp. 363–376. / JOM by O.D. Sherby (1990)
S. Lee, J. Wadsworth, and O.D. Sherby, “Tensile Properties of Laminated Composites Based on UHCS,” J. Composite Matls., 25 (1991), pp. 842–853. / JOM by S. Lee (1991)
H.C. Tsai, J. Wolfenstine, and O.D. Sherby, “Elevated Temperature Mechanical Behavior of an UHCS-Brass Laminated Composite,” J. of Composites, 22 (1991), pp. 373–379. / JOM by H.C. Tsai (1991)
J.A. Jimenez et. al. “Microstructural Studies of a Roll-Bonded UHCS Bar,” Matls. Characterization, 27 (1991), pp. 141–145. / JOM by J.A. Jimenez (1991)
C.K. Syn et al., “Laminated Metal Composites of UHCS-Brass and Al-Al/SiC: Processing and Properties,” Developments in Ceramic and Metal-Matrix Composites, ed. K. Upadhya (Warrendale, PA: TMS, 1991), pp. 311–322. / Developments in Ceramic and Metal-Matrix Composites by C.K. Syn (1991)
Y. Ohashi et al., “Fracture Behavior of a Laminated Steel/Brass Composite in Bend Tests,” Matls. Sci. and Eng., A151 (1992), pp. 37–44. / JOM by Y. Ohashi (1992)
S. Lee, J. Wadsworth, and O.D. Sherby, “Impact Properties of a Laminated Composite Based on UHCS and a Ni-Si Steel,” J. of Eng. Matls. and Technol., 114 (1992), pp. 278–281. / JOM by S. Lee (1992)
S. Lee et al., “Impact Properties of a Laminated Composite Based on UHCS and Brass,” Matls. Sci. and Eng., A154 (1992), pp. 133–137. / JOM by S. Lee (1992)
C.K. Syn, D.R. Lesuer, and O.D. Sherby, “Processing and Mech. Prop. of Laminated Metal Composites of Al/Al-25 vol.% SiC and UHCS/Brass,” Intl. Calif. on Advanced Synthesis of Engineered Structural Matls. (Materials Park, OH: ASM, 1992), pp. 149–156.
C.K. Syn et al., “Layer Thickness Effect on Ductile Tensile Fracture of UHCS-Brass Laminates,” Met. Trans, in press.
H.C. Tsai, K. Higashi, and O.D. Sherby, “Superplasticity in an UHCS-Aluminum Bronze Laminated Composite” (Paper presented at the Intl. Conf. on Adv. Composites, Wollongong, Australia, 15–19 February 1993), to be published by TMS.
S. Lee, “Tensile Impact Behavior of Laminated Composites Based on UHCS,” Ph.D. Dissertation, Stanford University (1988). / Tensile Impact Behavior of Laminated Composites Based on UHCS by S. Lee (1988)
J. Wittenauer, “Factors Influencing the Fatigue Behavior of Ferrous Based Laminated Composites,” Ph.D. Dissertation, Stanford University (1987). / Factors Influencing the Fatigue Behavior of Ferrous Based Laminated Composites by J. Wittenauer (1987)
G. Daehn, “Superplasticity and Stability in Metal-Based Composites,” Ph.D. Dissertation, Stanford University (1988). / Superplasticity and Stability in Metal-Based Composites by G. Daehn (1988)
O.D. Sherby, J. Wadsworth, and R.D. Caligiuri, “Superplasticity in Iron Base Alloys,” Metals Handbook, vol. 14 (Metals Park OH: ASM, 1988), pp. 868–874.
O.D. Sherby and J. Wadsworth, Steel—Yearbook of Science and Technology (New York: McGraw-Hill, 1989), pp. 378–380. / Steel—Yearbook of Science and Technology by O.D. Sherby (1989)
O.D. Sherby and J. Wadsworth, “Damascus Steels,” Scientific Am., 252 (1985), pp. 112–120. / JOM by O.D. Sherby (1985)
U.S. Dept. of Energy Office of Industrial Processes, Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988, FY 1992 Annual Report, DOE/CE-0387 (Washington, D.C: U.S. Department of Energy, 1992). / Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988, FY 1992 Annual Report / DOE/CE-0387 by U.S. Dept. of Energy Office of Industrial Processes (1992)

Dates

Type	When
Created	13 years, 7 months ago (Jan. 24, 2012, 8:16 a.m.)
Deposited	6 years, 3 months ago (May 22, 2019, 12:33 a.m.)
Indexed	4 months, 1 week ago (April 17, 2025, 12:25 a.m.)
Issued	32 years ago (Aug. 1, 1993)
Published	32 years ago (Aug. 1, 1993)
Published Print	32 years ago (Aug. 1, 1993)

Funders 0

None

BibTeX

@article{Lesuer_1993, title={The case for ultrahigh-carbon steels as structural materials}, volume={45}, ISSN={1543-1851}, url={http://dx.doi.org/10.1007/bf03222405}, DOI={10.1007/bf03222405}, number={8}, journal={JOM}, publisher={Springer Science and Business Media LLC}, author={Lesuer, D. R. and Syn, C. K. and Goldberg, A. and Wadsworth, J. and Sherby, O. D.}, year={1993}, month=aug, pages={40–46} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2025,
        4,
        17
      ]
    ],
    "date-time": "2025-04-17T04:25:16Z",
    "timestamp": 1744863916005
  },
  "reference-count": 82,
  "publisher": "Springer Science and Business Media LLC",
  "issue": "8",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            1993,
            8,
            1
          ]
        ],
        "date-time": "1993-08-01T00:00:00Z",
        "timestamp": 744163200000
      },
      "content-version": "tdm",
      "delay-in-days": 0,
      "URL": "http://www.springer.com/tdm"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        1993,
        8
      ]
    ]
  },
  "DOI": "10.1007/bf03222405",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2012,
        1,
        24
      ]
    ],
    "date-time": "2012-01-24T13:16:35Z",
    "timestamp": 1327410995000
  },
  "page": "40-46",
  "source": "Crossref",
  "is-referenced-by-count": 44,
  "title": "The case for ultrahigh-carbon steels as structural materials",
  "prefix": "10.1007",
  "volume": "45",
  "author": [
    {
      "given": "D. R.",
      "family": "Lesuer",
      "sequence": "first",
      "affiliation": []
    },
    {
      "given": "C. K.",
      "family": "Syn",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "A.",
      "family": "Goldberg",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "J.",
      "family": "Wadsworth",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "O. D.",
      "family": "Sherby",
      "sequence": "additional",
      "affiliation": []
    }
  ],
  "member": "297",
  "reference": [
    {
      "key": "BF03222405_CR1",
      "first-page": "569",
      "volume": "9",
      "author": "O.D. Sherby",
      "year": "1975",
      "unstructured": "O.D. Sherby et al., \u201cSuperplastic UHCSs,\u201d Scripta Met., 9, (1975), pp. 569\u2013574.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR2",
      "first-page": "266",
      "volume": "1",
      "author": "B. Walser",
      "year": "1976",
      "unstructured": "B. Walser, E.S. Kayali, and O.D. Sherby, \u201cWarm Working and Superplasticity in Plain UHCS,\u201d 4th Intl. Conf. on Strength of Metals and Alloys, vol. 1 (August 1976), pp. 266\u2013270.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR3",
      "unstructured": "O.D. Sherby et al. \u201cSuperplastic UHCSs,\u201d U.S. Patent 3,951,697 (20 April 1976)."
    },
    {
      "key": "BF03222405_CR4",
      "series-title": "Stanford University, Final Report DAHC-15-73-G15",
      "volume-title": "A Summary Report on Superplastic UHCS",
      "author": "O.D. Sherby",
      "year": "1977",
      "unstructured": "O.D. Sherby et al., \u201cA Summary Report on Superplastic UHCS,\u201d Stanford University, Final Report DAHC-15-73-G15 (February 1977)."
    },
    {
      "key": "BF03222405_CR5",
      "series-title": "Stanford University, Final Report ONR-N00014-17-C-0149",
      "volume-title": "A Summary Report on Superplastic UHCS",
      "author": "O.D. Sherby",
      "year": "1980",
      "unstructured": "O.D. Sherby et al., \u201cA Summary Report on Superplastic UHCS,\u201d Stanford University, Final Report ONR-N00014-17-C-0149 (June 1980)."
    },
    {
      "key": "BF03222405_CR6",
      "first-page": "16",
      "volume-title": "The Metallurgy of Steel",
      "author": "H.M. Howe",
      "year": "1891",
      "unstructured": "H.M. Howe, The Metallurgy of Steel, vol. 1, 2nd ed. (New York: Scientific Publishing Company, 1891), p. 16.",
      "edition": "2nd ed."
    },
    {
      "key": "BF03222405_CR7",
      "first-page": "1081",
      "volume-title": "Metals",
      "author": "H. Carpenter",
      "year": "1939",
      "unstructured": "H. Carpenter and J.M. Robertson, Metals, vol. II (London: Oxford University Press, 1939), p. 1081."
    },
    {
      "key": "BF03222405_CR8",
      "first-page": "511",
      "volume-title": "An Introduction to Metallurgy",
      "author": "A.H. Cottrell",
      "year": "1967",
      "unstructured": "A.H. Cottrell, An Introduction to Metallurgy (London: Edward Arnold Publishers, 1967), p. 511."
    },
    {
      "key": "BF03222405_CR9",
      "first-page": "109",
      "volume-title": "Eng. Materials",
      "author": "M.F. Ashby",
      "year": "1986",
      "unstructured": "M.F. Ashby and D.R.H. Jones, Eng. Materials, vol. 2 (New York: Pergamon Press, 1986), pp. 109, 112."
    },
    {
      "key": "BF03222405_CR10",
      "unstructured": "Y. Yagi, \u201cRecent Trends and Future Tasks in Ironmaking and Steelmaking,\u201d Proc. 19th Annual Meeting and Conf. (Brussels, Belgium: International Iron and Steel Institute, 1990)."
    },
    {
      "key": "BF03222405_CR11",
      "doi-asserted-by": "crossref",
      "first-page": "50",
      "DOI": "10.1007/BF03257713",
      "volume": "37",
      "author": "O.D. Sherby",
      "year": "1985",
      "unstructured": "O.D. Sherby et al., \u201cUHCSs,\u201d J. Metals, 37 (1985), pp. 50\u201356.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR12",
      "first-page": "381",
      "volume": "19",
      "author": "O.D. Sherby",
      "year": "1979",
      "unstructured": "O.D. Sherby, \u201cDamascus Steels Rediscovered?\u201d Trans. Iron and Steel Inst. Japan, 19 (1979), pp. 381\u2013390; also in J. Iron and Steel Inst. Japan, 66 (1980), pp. 282\u2013292.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR13",
      "first-page": "7",
      "volume": "4",
      "author": "O.D. Sherby",
      "year": "1979",
      "unstructured": "O.D. Sherby and J. Wadsworth, \u201cOn the Bulat (Damascus Steels),\u201d Bull. Metals Museum, 4 (1979), pp. 7\u201323.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR14",
      "first-page": "35",
      "volume": "25",
      "author": "J. Wadsworth",
      "year": "1980",
      "unstructured": "J. Wadsworth and O.D. Sherby, \u201cOn the Bulat\u2014Damascus Steels Revisited,\u201d Prog. Matls Sci., 25 (1980), pp. 35\u201368.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR15",
      "first-page": "328",
      "volume": "218",
      "author": "J. Wadsworth",
      "year": "1982",
      "unstructured": "J. Wadsworth and O.D. Sherby, \u201cDamascus Steel-Making,\u201d Science, 218 (1982), pp. 328\u2013329.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR16",
      "first-page": "53",
      "volume": "2",
      "author": "J. Wadsworth",
      "year": "1978",
      "unstructured": "J. Wadsworth and O.D. Sherby, \u201cInfluence of Nickel and Vanadium on Superplasticity in UHCSs,\u201d J. Mech. Work. Technol., 2 (1978), pp. 53\u201366.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR17",
      "first-page": "2645",
      "volume": "13",
      "author": "J. Wadsworth",
      "year": "1978",
      "unstructured": "J. Wadsworth and O.D. Sherby, \u201cInfluence of Chromium on Superplasticity in UHCSs,\u201d J. Matls. Sci., 13 (1978), pp. 2645\u20132649.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR18",
      "first-page": "381",
      "volume": "1",
      "author": "T. Oyama",
      "year": "1979",
      "unstructured": "T. Oyama et al., \u201cInfluence of Dilute Alloying Addition on the Superplastic Properties of UHCSs,\u201d 5th Intl. Conf. on Strength of Metals and Alloys, vol. 1 (August 1979), pp. 381\u2013386.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR19",
      "first-page": "1461",
      "volume": "10A",
      "author": "B. Walser",
      "year": "1979",
      "unstructured": "B. Walser and O.D. Sherby, \u201cMechanical Behavior of Superplastic UHCSs at Elevated Temperature,\u201d Met. Trans., 10A (1979), pp. 1461\u20131471.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR20",
      "first-page": "2688",
      "volume": "14",
      "author": "E.S. Kayali",
      "year": "1979",
      "unstructured": "E.S. Kayali et al., \u201cThe Development of Fine Structure Superplasticity in Cast UHCSs Through Thermal Cycling,\u201d J. Matls. Sci., 14 (1979), pp. 2688\u20132692.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR21",
      "first-page": "190",
      "volume": "5",
      "author": "J. Wadsworth",
      "year": "1981",
      "unstructured": "J. Wadsworth, J.H. Lin, and O.D. Sherby, \u201cSuperplasticity in a Tool Steel,\u201d Metals Technol., 5 (1981), pp. 190\u2013193.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR22",
      "unstructured": "T. Oyama et al., \u201cDevelopment of UHCSs for Transport. Applications,\u201d Stanford University, Final Report DTRS-5680-C-00031 (July 1980\u2013June 1983)."
    },
    {
      "key": "BF03222405_CR23",
      "first-page": "35",
      "volume": "38",
      "author": "H. Sunada",
      "year": "1979",
      "unstructured": "H. Sunada et al., \u201cMechanical Properties and Microstructure of Heat Treated UHCSs,\u201d Matls. Sci. Eng., 38 (1979), pp. 35\u201340.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR24",
      "first-page": "941",
      "volume": "13",
      "author": "O.D. Sherby",
      "year": "1979",
      "unstructured": "O.D. Sherby et al., \u201cSuperplastic Bonding of Ferrous Laminates,\u201d Scripta Met., 13 (1979), pp. 941\u2013946.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR25",
      "volume-title": "Superplasticity in Ferrous Laminated Composites",
      "author": "B.C. Snyder",
      "year": "1984",
      "unstructured": "B.C. Snyder, \u201cSuperplasticity in Ferrous Laminated Composites,\u201d Ph.D. Dissertation, Stanford University (1984)."
    },
    {
      "key": "BF03222405_CR26",
      "first-page": "919",
      "volume": "32",
      "author": "B.C. Snyder",
      "year": "1984",
      "unstructured": "B.C. Snyder, J. Wadsworth, and O.D. Sherby, \u201cSuperplastic Behavior in Ferrous Laminated Composites,\u201d Acta Met., 32 (1984), pp. 919\u2013932.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR27",
      "volume-title": "Structure and Mechanical Behavior of Ferrous Laminated Composites Containing UHCSs",
      "author": "D.W. Kum",
      "year": "1984",
      "unstructured": "D.W. Kum, \u201cStructure and Mechanical Behavior of Ferrous Laminated Composites Containing UHCSs,\u201d Ph.D. Dissertation, Stanford University (1984)."
    },
    {
      "key": "BF03222405_CR28",
      "first-page": "105",
      "volume": "5",
      "author": "T. Itoh",
      "year": "1981",
      "unstructured": "T. Itoh et al., \u201cManufacture and Mechanical Properties of Laminated and Monolithic Fine-Grained High Carbon Superplastic Bearing Steel,\u201d J. Mech. Work. Technol., 5 (1981), pp. 105\u2013123.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR29",
      "first-page": "173",
      "volume": "31",
      "author": "D.W. Kum",
      "year": "1983",
      "unstructured": "D.W. Kum et al., \u201cThe Impact Properties of Laminated Composites Containing UHCSs,\u201d J. Mech. Phys. Solids, 31 (1983), pp. 173\u2013186.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR30",
      "first-page": "59",
      "volume": "12",
      "author": "R.D. Caligiuri",
      "year": "1976",
      "unstructured": "R.D. Caligiuri, R.T. Whalen, and O.D. Sherby, \u201cSuperplastic Hot Pressing of White Cast Iron,\u201d Intl. J. Powd. Metall., 12 (1976), pp. 59\u201374.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR31",
      "first-page": "355",
      "volume": "13A",
      "author": "O.A. Ruano",
      "year": "1982",
      "unstructured": "O.A. Ruano, J. Wadsworth, and O.D. Sherby, \u201cEnhanced Densification of White Cast Iron Powders by Cyclic Phase Transformation Under Stress,\u201d Met. Trans., 13A (1982), pp. 355\u2013361.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR32",
      "first-page": "1785",
      "volume": "13A",
      "author": "O.A. Ruano",
      "year": "1982",
      "unstructured": "O.A. Ruano, L.E. Eiselstein, and O.D. Sherby, \u201cSuperplasticity in Rapidly Solidified White Cast Irons,\u201d Met. Trans., 13A (1982), pp. 1785\u20131792.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR33",
      "first-page": "483",
      "volume": "18",
      "author": "L.E. Eiselstein",
      "year": "1983",
      "unstructured": "L.E. Eiselstein, O.A Ruano, and O.D. Sherby, \u201cStructural Characterization of Rapidly Solidified White Cast Iron Powders,\u201d J. Matls. Sci., 18 (1983), pp. 483\u2013492.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR34",
      "first-page": "155",
      "volume": "26",
      "author": "O.A. Ruano",
      "year": "1983",
      "unstructured": "O.A. Ruano, L.E. Eiselstein, and O.D. Sherby, \u201cRoom Temperature Strength and Ductility of Rapidly Solidified White Cast Irons,\u201d Powder Metall., 26 (1983), pp. 155\u2013160.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR35",
      "unstructured": "L.E. Eiselstein et al., \u201cMicrostructure and Mech. Prop. of Rapidly Solidified White Cast Iron Powders,\u201d Proc. 3rd Intl. Conf. Rapid Solidification Processing (Gaithersburg, MD: National Bureau of Standards, 6\u20138 December 1982), pp. 245\u2013251."
    },
    {
      "key": "BF03222405_CR36",
      "first-page": "355",
      "volume-title": "Deformation, Processing, and Structure",
      "author": "O. D. Sherby",
      "year": "1984",
      "unstructured": "O. D. Sherby and J. Wadsworth, \u201cDevelopment and Characterization of Fine-Grained Superplastic Materials,\u201d Deformation, Processing, and Structure, ed. C. Krauss (Metals Park, OH: ASM, 1984), pp. 355\u2013389."
    },
    {
      "key": "BF03222405_CR37",
      "first-page": "799",
      "volume": "18",
      "author": "T. Oyama",
      "year": "1984",
      "unstructured": "T. Oyama et al., \u201cApplication of the DET to the Development of Fine-Grained, Spheroidized Structures in UHCSs,\u201d Scripta Metall., 18 (1984), pp. 799\u2013804.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR38",
      "volume-title": "DET Process and Product of UHCSs",
      "author": "T. Oyama",
      "year": "1984",
      "unstructured": "T. Oyama, O.D. Sherby, and J. Wadsworth, \u201cDET Process and Product of UHCSs,\u201d U.S. Patent 4,448,613 (15 May 1984)."
    },
    {
      "key": "BF03222405_CR39",
      "volume-title": "Processing and Properties of UHCSs",
      "author": "T. Oyama",
      "year": "1983",
      "unstructured": "T. Oyama, \u201cProcessing and Properties of UHCSs,\u201d Ph.D. Dissertation, Stanford University (1983)."
    },
    {
      "key": "BF03222405_CR40",
      "unstructured": "T. Oyama et al., \u201cHeat Treatment of Fine-Grained UHCSs for Attainment of Strong and Ductile Materials,\u201d Proc. 5th Gen. Assembly of CENIM."
    },
    {
      "key": "BF03222405_CR41",
      "volume-title": "The Influence of Heat Treatment on the Microstructure and Properties of Fine-Grained UHCSs",
      "author": "W.B. Avery",
      "year": "1982",
      "unstructured": "W.B. Avery, \u201cThe Influence of Heat Treatment on the Microstructure and Properties of Fine-Grained UHCSs,\u201d M.S. Dissertation, Stanford University (1982)."
    },
    {
      "key": "BF03222405_CR42",
      "volume-title": "UHCS Alloy and Processing Thereof",
      "author": "O.D. Sherby",
      "year": "1985",
      "unstructured": "O.D. Sherby and T. Oyama, \u201cUHCS Alloy and Processing Thereof,\u201d U.S. Patent No. 4,533,390 (6 August 1985)."
    },
    {
      "key": "BF03222405_CR43",
      "volume-title": "UHCSs Containing Al",
      "author": "O.D. Sherby",
      "year": "1988",
      "unstructured": "O.D. Sherby et al., \u201cUHCSs Containing Al,\u201d U.S. Patent 4,769,214 (6 September 1988)."
    },
    {
      "key": "BF03222405_CR44",
      "volume-title": "Influence of Al, Sn and Si on the Superplastic Behavior of UHCS",
      "author": "H. Fukuyo",
      "year": "1987",
      "unstructured": "H. Fukuyo, \u201cInfluence of Al, Sn and Si on the Superplastic Behavior of UHCS,\u201d Engineer Dissertation, Stanford University (June 1987)."
    },
    {
      "key": "BF03222405_CR45",
      "first-page": "76",
      "volume": "31",
      "author": "H. Fukuyo",
      "year": "1991",
      "unstructured": "H. Fukuyo et al., \u201cSuperplasticity and Newtonian-Viscous Flow in Fine-Grained Class I Solid Solution Alloys,\u201d ISIJ International, 31 (1991), pp. 76\u201385.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR46",
      "volume-title": "Superplasticity in UHCSs and Their Laminates",
      "author": "H.C. Tsai",
      "year": "1990",
      "unstructured": "H.C. Tsai, \u201cSuperplasticity in UHCSs and Their Laminates,\u201d Ph.D. Dissertation, Stanford University (June 1990)."
    },
    {
      "key": "BF03222405_CR47",
      "first-page": "503",
      "volume-title": "Superplasticity in Adv. Materials",
      "author": "D.W. Kum",
      "year": "1991",
      "unstructured": "D.W. Kum, H.K. Kang, and S.H. Hong, \u201cAl Effects on the Microstructure and Superplasticity of UHCSs Processed by DETW AD,\u201d Superplasticity in Adv. Materials, ed. S. Hori, M. Tokizane, and N. Furushiro (Osaka, Japan: Japan Society for Research on Superplasticity, June 1991), pp. 503\u2013508."
    },
    {
      "key": "BF03222405_CR48",
      "unstructured": "M.J. Strum, \u201cSuperplastic Steels: \u201cJoint LLNL-Industry Research,\u201d Energy and Technology Review (Livermore, CA: Lawrence Livermore National Lab, November 1989), pp. 18\u201328."
    },
    {
      "key": "BF03222405_CR49",
      "unstructured": "C.K. Syn, D.R. Lesuer, and O.D. Sherby, \u201cInfluence of Microstructure on the Tensile Prop. of Spheroidized UHCS,\u201d submitted for publication in Met. Trans. A (1993)."
    },
    {
      "key": "BF03222405_CR50",
      "first-page": "32",
      "volume-title": "Superplastic Forming",
      "author": "O.D. Sherby",
      "year": "1985",
      "unstructured": "O.D. Sherby et al., \u201cSuperplastic UHCSs,\u201d Superplastic Forming, ed. S. Agrawal (Metals Park, OH: ASM, 1985), pp. 32\u201342."
    },
    {
      "key": "BF03222405_CR51",
      "first-page": "1703",
      "volume": "18A",
      "author": "D.W. Kum",
      "year": "1987",
      "unstructured": "D.W. Kum et al., \u201cMicrostructure and Superplastic Behavior of Eutectic Fe-Cr and Ni-Cr White Cast Irons,\u201d Met. Trans., 18A (1987), pp. 1703\u20131711.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR52",
      "first-page": "1515",
      "volume": "23",
      "author": "W.J. Kim",
      "year": "1989",
      "unstructured": "W.J. Kim et al., \u201cSuperplastic Behavior of Iron Carbide,\u201d Scripta Metall., 23 (1989), pp. 1515\u20131520.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR53",
      "first-page": "519",
      "volume": "1",
      "author": "O.D. Sherby",
      "year": "1988",
      "unstructured": "O.D. Sherby and J. Wadsworth, \u201cSuperplasticity in Iron-Based Alloys,\u201d Encyclopedia of Matls. Sci. and Eng., suppl. vol. 1 (1988), pp. 519\u2013522.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR54",
      "first-page": "507",
      "volume-title": "Superplasticity and Superplastic Forming",
      "author": "J. Wittenauer",
      "year": "1988",
      "unstructured": "J. Wittenauer, P. Schepp, and B. Walser, \u201cApplication of Superplastic UHC Steel for Isothermal Forging of Machine Components,\u201d Superplasticity and Superplastic Forming, ed. C.H. Hamilton and N.E. Paton (Warrendale, PA: TMS, 1988), pp. 507\u2013511."
    },
    {
      "key": "BF03222405_CR55",
      "first-page": "499",
      "volume-title": "34th Sagamore Conf. on Materials, Innovations in Ultrahigh Strength Steel Technology",
      "author": "R.D. Caligiuri",
      "year": "1990",
      "unstructured": "R.D. Caligiuri, L.E. Eiselstein, and O.D. Sherby, \u201cProperties and Applications of UHCS Laminates,\u201d 34th Sagamore Conf. on Materials, Innovations in Ultrahigh Strength Steel Technology, ed. G.B. Olson, M. Azrin and E.S. Wright (Watertown, MA: U.S. Army Materials Tech Lab, 1990), pp. 499\u2013525."
    },
    {
      "key": "BF03222405_CR56",
      "unstructured": "O.D. Sherby, research in progress, Stanford University (1993)."
    },
    {
      "key": "BF03222405_CR57",
      "first-page": "541",
      "volume": "1",
      "author": "O.D. Sherby",
      "year": "1988",
      "unstructured": "O.D. Sherby and J. Wadsworth, \u201cUHCSs,\u201d Encyclopedia of Matls. Sci. and Eng., suppl. vol. 1 (1988), pp. 541\u2013545.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR58",
      "first-page": "2231",
      "volume": "4",
      "author": "R.A. Grange",
      "year": "1973",
      "unstructured": "R.A. Grange, \u201cEstimating the Hardenability of Carbon Steels,\u201d Met. Trans., 4 (1973), pp. 2231\u20132244.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR59",
      "unstructured": "J. Wadsworth, D.W. Kum, and O.D. Sherby, \u201cWelded Damascus Steels and a New Breed of Laminated Composites,\u201d Met. Prog. (June 1986); also published in The Anvil\u2019s Ring, spring issue (1987)."
    },
    {
      "key": "BF03222405_CR60",
      "first-page": "1517",
      "volume": "17A",
      "author": "D.W. Kum",
      "year": "1986",
      "unstructured": "D.W. Kum et al., \u201cDevelop. of Ferrous Laminated Composites with Unique Microstructures by Control of Carbon Diffusion,\u201d Met. Trans., 17A (1986), pp. 1517\u20131521.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR61",
      "first-page": "2295",
      "volume": "17A",
      "author": "G.S. Daehn",
      "year": "1986",
      "unstructured": "G.S. Daehn, D.W. Kum, and O.D. Sherby, \u201cSuperplasticity of a Stainless Steel Clad UHCS,\u201d Met. Trans., 17A (1986), 2295\u20132298.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR62",
      "first-page": "244",
      "volume": "109",
      "author": "J. Wittenauer",
      "year": "1987",
      "unstructured": "J. Wittenauer and O.D. Sherby, \u201cFactors Influencing the Fatigue Behavior of Ferrous Laminates,\u201d J. Eng. Mat. Tech., 109 (1987), pp. 244\u2013251.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR63",
      "unstructured": "J. Wadsworth and O.D. Sherby, \u201cDamascus Steels,\u201d Encyclopedia of Matls. Sci. and Eng., suppl. vol. 1 (New York: Pergamon Press, 1988), pp. 113\u2013115."
    },
    {
      "key": "BF03222405_CR64",
      "first-page": "233",
      "volume": "31",
      "author": "S. Lee",
      "year": "1990",
      "unstructured": "S. Lee, J. Wadsworth, and O.D. Sherby, \u201cImpact Properties of a Laminated Composite Based on UHCS and Hadfield Manganese Steel,\u201d Res Mechanica, 31 (1990), pp. 233\u2013248.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR65",
      "first-page": "363",
      "volume": "5",
      "author": "O.D. Sherby",
      "year": "1990",
      "unstructured": "O.D. Sherby et al., \u201cMultilayered Composites Based on UHCS and Brass,\u201d Matls. and Manufact. Processes, 5 (1990), pp. 363\u2013376.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR66",
      "first-page": "842",
      "volume": "25",
      "author": "S. Lee",
      "year": "1991",
      "unstructured": "S. Lee, J. Wadsworth, and O.D. Sherby, \u201cTensile Properties of Laminated Composites Based on UHCS,\u201d J. Composite Matls., 25 (1991), pp. 842\u2013853.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR67",
      "first-page": "373",
      "volume": "22",
      "author": "H.C. Tsai",
      "year": "1991",
      "unstructured": "H.C. Tsai, J. Wolfenstine, and O.D. Sherby, \u201cElevated Temperature Mechanical Behavior of an UHCS-Brass Laminated Composite,\u201d J. of Composites, 22 (1991), pp. 373\u2013379.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR68",
      "first-page": "141",
      "volume": "27",
      "author": "J.A. Jimenez",
      "year": "1991",
      "unstructured": "J.A. Jimenez et. al. \u201cMicrostructural Studies of a Roll-Bonded UHCS Bar,\u201d Matls. Characterization, 27 (1991), pp. 141\u2013145.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR69",
      "first-page": "311",
      "volume-title": "Developments in Ceramic and Metal-Matrix Composites",
      "author": "C.K. Syn",
      "year": "1991",
      "unstructured": "C.K. Syn et al., \u201cLaminated Metal Composites of UHCS-Brass and Al-Al/SiC: Processing and Properties,\u201d Developments in Ceramic and Metal-Matrix Composites, ed. K. Upadhya (Warrendale, PA: TMS, 1991), pp. 311\u2013322."
    },
    {
      "key": "BF03222405_CR70",
      "first-page": "37",
      "volume": "A151",
      "author": "Y. Ohashi",
      "year": "1992",
      "unstructured": "Y. Ohashi et al., \u201cFracture Behavior of a Laminated Steel/Brass Composite in Bend Tests,\u201d Matls. Sci. and Eng., A151 (1992), pp. 37\u201344.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR71",
      "first-page": "278",
      "volume": "114",
      "author": "S. Lee",
      "year": "1992",
      "unstructured": "S. Lee, J. Wadsworth, and O.D. Sherby, \u201cImpact Properties of a Laminated Composite Based on UHCS and a Ni-Si Steel,\u201d J. of Eng. Matls. and Technol., 114 (1992), pp. 278\u2013281.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR72",
      "first-page": "133",
      "volume": "A154",
      "author": "S. Lee",
      "year": "1992",
      "unstructured": "S. Lee et al., \u201cImpact Properties of a Laminated Composite Based on UHCS and Brass,\u201d Matls. Sci. and Eng., A154 (1992), pp. 133\u2013137.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR73",
      "unstructured": "C.K. Syn, D.R. Lesuer, and O.D. Sherby, \u201cProcessing and Mech. Prop. of Laminated Metal Composites of Al/Al-25 vol.% SiC and UHCS/Brass,\u201d Intl. Calif. on Advanced Synthesis of Engineered Structural Matls. (Materials Park, OH: ASM, 1992), pp. 149\u2013156."
    },
    {
      "key": "BF03222405_CR74",
      "unstructured": "C.K. Syn et al., \u201cLayer Thickness Effect on Ductile Tensile Fracture of UHCS-Brass Laminates,\u201d Met. Trans, in press."
    },
    {
      "key": "BF03222405_CR75",
      "unstructured": "H.C. Tsai, K. Higashi, and O.D. Sherby, \u201cSuperplasticity in an UHCS-Aluminum Bronze Laminated Composite\u201d (Paper presented at the Intl. Conf. on Adv. Composites, Wollongong, Australia, 15\u201319 February 1993), to be published by TMS."
    },
    {
      "key": "BF03222405_CR76",
      "volume-title": "Tensile Impact Behavior of Laminated Composites Based on UHCS",
      "author": "S. Lee",
      "year": "1988",
      "unstructured": "S. Lee, \u201cTensile Impact Behavior of Laminated Composites Based on UHCS,\u201d Ph.D. Dissertation, Stanford University (1988)."
    },
    {
      "key": "BF03222405_CR77",
      "volume-title": "Factors Influencing the Fatigue Behavior of Ferrous Based Laminated Composites",
      "author": "J. Wittenauer",
      "year": "1987",
      "unstructured": "J. Wittenauer, \u201cFactors Influencing the Fatigue Behavior of Ferrous Based Laminated Composites,\u201d Ph.D. Dissertation, Stanford University (1987)."
    },
    {
      "key": "BF03222405_CR78",
      "volume-title": "Superplasticity and Stability in Metal-Based Composites",
      "author": "G. Daehn",
      "year": "1988",
      "unstructured": "G. Daehn, \u201cSuperplasticity and Stability in Metal-Based Composites,\u201d Ph.D. Dissertation, Stanford University (1988)."
    },
    {
      "key": "BF03222405_CR79",
      "unstructured": "O.D. Sherby, J. Wadsworth, and R.D. Caligiuri, \u201cSuperplasticity in Iron Base Alloys,\u201d Metals Handbook, vol. 14 (Metals Park OH: ASM, 1988), pp. 868\u2013874."
    },
    {
      "key": "BF03222405_CR80",
      "first-page": "378",
      "volume-title": "Steel\u2014Yearbook of Science and Technology",
      "author": "O.D. Sherby",
      "year": "1989",
      "unstructured": "O.D. Sherby and J. Wadsworth, Steel\u2014Yearbook of Science and Technology (New York: McGraw-Hill, 1989), pp. 378\u2013380."
    },
    {
      "key": "BF03222405_CR81",
      "first-page": "112",
      "volume": "252",
      "author": "O.D. Sherby",
      "year": "1985",
      "unstructured": "O.D. Sherby and J. Wadsworth, \u201cDamascus Steels,\u201d Scientific Am., 252 (1985), pp. 112\u2013120.",
      "journal-title": "JOM"
    },
    {
      "key": "BF03222405_CR82",
      "series-title": "DOE/CE-0387",
      "volume-title": "Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988, FY 1992 Annual Report",
      "author": "U.S. Dept. of Energy Office of Industrial Processes",
      "year": "1992",
      "unstructured": "U.S. Dept. of Energy Office of Industrial Processes, Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988, FY 1992 Annual Report, DOE/CE-0387 (Washington, D.C: U.S. Department of Energy, 1992)."
    }
  ],
  "container-title": "JOM",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "http://link.springer.com/content/pdf/10.1007/BF03222405.pdf",
      "content-type": "application/pdf",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "http://link.springer.com/article/10.1007/BF03222405/fulltext.html",
      "content-type": "text/html",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "http://link.springer.com/content/pdf/10.1007/BF03222405",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "similarity-checking"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2019,
        5,
        22
      ]
    ],
    "date-time": "2019-05-22T04:33:11Z",
    "timestamp": 1558499591000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "http://link.springer.com/10.1007/BF03222405"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        1993,
        8
      ]
    ]
  },
  "references-count": 82,
  "journal-issue": {
    "issue": "8",
    "published-print": {
      "date-parts": [
        [
          1993,
          8
        ]
      ]
    }
  },
  "alternative-id": [
    "BF03222405"
  ],
  "URL": "http://dx.doi.org/10.1007/BF03222405",
  "relation": {},
  "ISSN": [
    "1047-4838",
    "1543-1851"
  ],
  "subject": [],
  "container-title-short": "JOM",
  "published": {
    "date-parts": [
      [
        1993,
        8
      ]
    ]
  }
}