DOI: 10.1007/bf02586157. Microstructural effects on the springback of advanced high-strength steel

Microstructural effects on the springback of advanced high-strength steel

10.1007/bf02586157

Crossref journal-article

Springer Science and Business Media LLC

Metallurgical and Materials Transactions A (297)

Bibliography

Gan, W., Babu, S. S., Kapustka, N., & Wagoner, R. H. (2006). Microstructural effects on the springback of advanced high-strength steel. Metallurgical and Materials Transactions A, 37(11), 3221â3231.

Authors 4

Wei Gan (first)
S. S. Babu (additional)
Nick Kapustka (additional)
Robert H. Wagoner (additional)

References 64 Referenced 49

J. Chainer:AISE Steel Technol., 2002, vol. 79 (7–8), pp. 69–73. / AISE Steel Technol. by J. Chainer (2002)
J.R. Shaw and B.K. Zuidema:J. Mater. Manuf., 2001, vol. 5 (110), pp. 976–83. / J. Mater. Manuf. by J.R. Shaw (2001)
T. Senuma:Can. Metall. Q., 2004, vol. 43 (1), pp. 1–12. (10.1179/cmq.2004.43.1.1) / Can. Metall. Q. by T. Senuma (2004)
R. Bode, M. Meurer, T.W. Schaumann, and W.W. Arnecke:Galvatech’04 Conf. Proc., reprinted by Association for Iron & Steel Technology, 2004, Warrendale, PA.
T. Senuma:Iron Steel Inst. Jpn. Int., 2001, vol. 41 (6), pp. 520–32. (10.2355/isijinternational.41.520) / Iron Steel Inst. Jpn. Int. by T. Senuma (2001)
S. Keeler:Met. Forming, Apr. 2005, pp. 52–53. (10.1007/BF03251905)
S.M. Song, K. Sugimoto, M. Kobayashi, H. Matsubara, and T. Kashima:Tetsu-to-Hagane, 2000, vol. 86 (8), pp. 563–69. (10.2355/tetsutohagane1955.86.8_563) / Tetsu-to-Hagane by S.M. Song (2000)
M. Takahashi:Nippon Steel Techn. Rep., 2003, vol. 88, pp. 2–7. / Nippon Steel Techn. Rep. by M. Takahashi (2003)
International Iron and Steel Institute: Advanced High Strength Steel (AHSS) Application Guidelines, Mar. 2005, www.worldautosteel.org
E. Pereloma:Mater. Austr., 2003, Nov.–Dec., pp. 6–9.
L. Svensson and J.K. Larsson:6th Int. Trends in Welding Research Conf. Proc., 2002, pp. 787–92.
E. Biro and A. Lee:Sheet Metal Welding Conf. XI, 2004, Sterling Heights, MI.
C. Hsu, P. Soltis, D. Barton, and C. Occhialini:Sheet Metal Welding Conf. XI, Sterling Heights, MI, 2004.
C. Conrady and N. Kapustka:Sheet Metal Welding Conf. XII, Livonia, MI, May 9–12, 2006.
S. Papaefthymiou, W. Bleck, U. Prahl, C. Acht, J. Sietsma, and S. van der Zwaag:Mater. Sci. Forum, 2003, vol. 426 (4), pp. 1355–60. (10.4028/www.scientific.net/MSF.426-432.1355) / Mater. Sci. Forum by S. Papaefthymiou (2003)
B. Högmanet al.:Verschleißschutztechnik, Schopfheim, Germany, 2004.
G. Hartmann:Processing State of the Art Multiphase Steels, ACI Conf. Berlin, 2004.
B. Carlsson:3rd Int. Conf. Exhib. on Design and Production of Dies and Molds and 7th Int. Symp. on Advances in Abrasive Technology, Bursa, Turkey, June 17–19, 2004.
Y. Kuriyama: No. 175-76thNMS (Nishiyama Memorial Sem.), ISIJ, Tokyo, Japan, 2001, p. 1. / No. 175-76thNMS (Nishiyama Memorial Sem.) by Y. Kuriyama (2001)
E. Doege, S. Kulp, and C. Sunderkotter:Steel Res., 2002, vol. 73 (6–7), pp. 303–08. (10.1002/srin.200200213) / Steel Res. by E. Doege (2002)
A. Andersson:J. Mater. Proc. Technol., 2005, vol. 169 (3), pp. 352–56. (10.1016/j.jmatprotec.2005.04.095) / J. Mater. Proc. Technol. by A. Andersson (2005)
C. Greisert and J. Wesemann:Steel Res., 2002, vol. 73 (6–7), pp. 309–13. (10.1002/srin.200200214) / Steel Res. by C. Greisert (2002)
T. Ohwue, T. Yoshida, Y. Shirai, and T. Kikuma:Mater. Trans., 2003, vol. 44 (5), pp. 946–50. (10.2320/matertrans.44.946) / Mater. Trans. by T. Ohwue (2003)
J.C. Lin and C.C. Tai:Int. J. Adv. Manuf. Technol., 1999, vol. 15 (3), pp. 163–70. (10.1007/s001700050053) / Int. J. Adv. Manuf. Technol. by J.C. Lin (1999)
D.K. Leu:J. Mater. Proc. Technol., 1997, vol. 66 (1–3), pp. 9–17. (10.1016/S0924-0136(96)02453-3) / J. Mater. Proc. Technol. by D.K. Leu (1997)
D.A. Smith:Die Design Handbook, 3rd ed., Society of Manufacturing Engineers, Dearborn, MI, 1990. / Die Design Handbook by D.A. Smith (1990)
G. Sachs:Principles and Methods of Sheet Metal Fabricating, Reinhold Publishing Corp., New York, NY, 1951. / Principles and Methods of Sheet Metal Fabricating by G. Sachs (1951)
F.W. Wilson:Die Design Handbook, 1st ed., McGraw-Hill, Columbus, OH, 1955. / Die Design Handbook by F.W. Wilson (1955)
R.D. Webb and D.E. Hardt:J. Eng. Indus.-Trans. ASME, 1991, vol. 113, pp. 44–52. (10.1115/1.2899621) / J. Eng. Indus.-Trans. ASME by R.D. Webb (1991)
C. Hindman and K.B. Ousterhout:J. Mater. Proc. Technol., 2000, vol. 99, pp. 38–48. (10.1016/S0924-0136(99)00257-5) / J. Mater. Proc. Technol. by C. Hindman (2000)
A.P. Karafillis and M.C. Boyce:Int. J. Mech. Sci., 1992, vol. 34, pp. 113–31. (10.1016/0020-7403(92)90077-T) / Int. J. Mech. Sci. by A.P. Karafillis (1992)
A.P. Karafillis and M.C. Boyce:J. Mater. Proc. Technol., 1992, vol. 32, pp. 499–508. (10.1016/0924-0136(92)90206-8) / J. Mater. Proc. Technol. by A.P. Karafillis (1992)
A.P. Karafillis and M.C. Boyce:Int. J. Mach. Tools Manuf., 1996, vol. 36, pp. 503–26. (10.1016/0890-6955(95)00023-2) / Int. J. Mach. Tools Manuf. by A.P. Karafillis (1996)
W. Gan and R.H. Wagoner:Int. J. Mech. Sci., 2004, vol. 46 (7), pp. 1097–113. (10.1016/j.ijmecsci.2004.06.006) / Int. J. Mech. Sci. by W. Gan (2004)
W. Gan, R.H. Wagoner, K. Mao, S. Price, and F. Rasouli:J. Mater. Proc. Technol., 2004, vol. 126 (4), pp. 360–67. (10.1115/1.1789955) / J. Mater. Proc. Technol. by W. Gan (2004)
R. Lingbeek, J. Huetink, S. Ohnimus, M. Petzoldt, and J. Weiher:J. Mater. Proc. Technol., 2005, vol. 169 (1), pp. 115–25. (10.1016/j.jmatprotec.2005.04.027) / J. Mater. Proc. Technol. by R. Lingbeek (2005)
F.J. Gardiner:Trans. ASME, 1957, vol. 79, pp. 1–9. / Trans. ASME by F.J. Gardiner (1957)
W. Schroeder:Trans. ASME, 1943, vol. 65, pp. 817–27. / Trans. ASME by W. Schroeder (1943)
L. Papeleux and J.P. Ponthot:J. Mater. Proc. Technol., 2002, vol. 125, pp. 785–91. (10.1016/S0924-0136(02)00393-X) / J. Mater. Proc. Technol. by L. Papeleux (2002)
L. Sanchez, R.D. Robertson, and J.C. Gerdeen: SAE Paper 960595, Society of Automotive Engineers, Warrendale, PA, 1996.
B.W. Shaffer and R.N. House, Jr.:ASME J. Appl. Mech., 1955, vol. 22, pp. 305–10. (10.1115/1.4011077) / ASME J. Appl. Mech. by B.W. Shaffer (1955)
B.S. Levy:J. Appl. Metalworking, 1984, vol. 3, pp. 135–41. (10.1007/BF02833692) / J. Appl. Metalworking by B.S. Levy (1984)
L.M. Geng and R.H. Wagoner:Int. J. Mech. Sci., 2002, vol. 44, pp. 123–48. (10.1016/S0020-7403(01)00085-6) / Int. J. Mech. Sci. by L.M. Geng (2002)
W.D. Carden, L.M. Geng, D.K. Matlock and R.H. Wagoner:Int. J. Mech. Sci., 2002, vol. 44, pp. 79–101. (10.1016/S0020-7403(01)00082-0) / Int. J. Mech. Sci. by W.D. Carden (2002)
K.P. Li, W.D. Carden, and R.H. Wagoner:Int. J. Mech. Sci., 2002, vol. 44, pp. 103–22. (10.1016/S0020-7403(01)00083-2) / Int. J. Mech. Sci. by K.P. Li (2002)
M. Huang and J.C. Gerdeen:Analysis of Autobody Stamping Technology, Society of Automotive Engineers, Warrendale, PA, 1994, 125–38. / Analysis of Autobody Stamping Technology by M. Huang (1994)
T.X. Yu and W. Johnson:J. Mech. Working Technol., 1982, vol. 6 (1), pp. 5–21. (10.1016/0378-3804(82)90016-X) / J. Mech. Working Technol. by T.X. Yu (1982)
S.W. Lee and D.Y. Yang:J. Mater. Proc. Technol., 1998, vol. 80 (1), pp. 60–67. (10.1016/S0924-0136(98)00177-0) / J. Mater. Proc. Technol. by S.W. Lee (1998)
W. Gan, P. Zhang, R.H. Wagoner, and G.S. Daehn:Int. J. Mater. Res. Adv. Technol., 2005, June, pp. 572–577. (10.3139/146.101072)
W. Gan, P. Zhang, R.H. Wagoner, and G.S. Daehn:Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2097–106. (10.1007/BF02586130) / Metall. Mater. Trans. A by W. Gan (2006)
D.F. Watt, X.Q. Xu, and D.J. Lloyd:Acta Mater., 1996, vol. 44 (2), pp. 789–99. (10.1016/1359-6454(95)00209-X) / Acta Mater. by D.F. Watt (1996)
Y.L. Shenet al.:Acta Metall. Mater., 1995, vol. 43 (4), pp. 1701–22. (10.1016/0956-7151(94)00346-J) / Acta Metall. Mater. by Y.L. Shen (1995)
M. Ekh, R. Lillbacka, and K. Runesson:Int. J. Plast., 2004, vol. 20 (12), pp. 2143–59. (10.1016/j.ijplas.2004.04.007) / Int. J. Plast. by M. Ekh (2004)
J.O. Andersson, T. Helander, L.H. Hoglundet al.:CALPHAD, 2002, vol. 26 (2), pp. 273–312. (10.1016/S0364-5916(02)00037-8) / CALPHAD by J.O. Andersson (2002)
E.O. Hall:Proc. Phys. Soc., Ser. B, 1951, vol. 64, pp. 747–53. (10.1088/0370-1301/64/9/303) / Proc. Phys. Soc., Ser. B by E.O. Hall (1951)
N.J. Petch:J. Iron Steel Inst., 1953, May, pp. 25–28.
E.F. Rauch and J.H. Schmitt:Mater. Sci. Eng. A, 1989, vol. 113, pp. 441–48. (10.1016/0921-5093(89)90331-6) / Mater. Sci. Eng. A by E.F. Rauch (1989)
D.A. Hughes and N. Hansen:Acta Mater., 2000, vol. 48 (11), pp. 2985–3004. (10.1016/S1359-6454(00)00082-3) / Acta Mater. by D.A. Hughes (2000)
Abaqus/Standard User’s Manual 6.5, ABAQUS, Inc., Providence, RI, 2004.
J.F. Wang, R.H. Wagoner, D.K. Matlock, and F. Barlat:Int. J. Solids Struct., 2005, vol. 42 (5–6), pp. 1287–1307. (10.1016/j.ijsolstr.2004.08.017) / Int. J. Solids Struct. by J.F. Wang (2005)
J.F. Wang, R.H. Wagoner, D.K. Matlock, W.D. Carden, D.K. Matlock, and F. Barlat:Int. J. Plas., 2004, vol. 20 (12), pp. 2209–32. (10.1016/j.ijplas.2004.05.008) / Int. J. Plas. by J.F. Wang (2004)
S. Bugat, J. Besson, and A. Pineau:Comp. Mater. Sci., 1999, vol. 16 (1–4), pp. 158–66. (10.1016/S0927-0256(99)00058-0) / Comp. Mater. Sci. by S. Bugat (1999)
P. Dawson, D. Boyce, S. MacEwen, and R. Rogge:Metall. Mater. Trans. A., 2000, vol. 31 (6), pp. 1543–55. (10.1007/s11661-000-0165-4) / Metall. Mater. Trans. A. by P. Dawson (2000)
S.S. Babu, S.A. David, and M. Quintana:Welding J., 2001, vol. 80, pp. 91s-97s. / Welding J. by S.S. Babu (2001)

Dates

Type	When
Created	18 years, 4 months ago (April 4, 2007, 10:42 p.m.)
Deposited	1 year, 6 months ago (Feb. 12, 2024, 2:34 p.m.)
Indexed	4 weeks, 1 day ago (Aug. 6, 2025, 9:38 a.m.)
Issued	18 years, 10 months ago (Nov. 1, 2006)
Published	18 years, 10 months ago (Nov. 1, 2006)
Published Print	18 years, 10 months ago (Nov. 1, 2006)

Funders 0

None

BibTeX

@article{Gan_2006, title={Microstructural effects on the springback of advanced high-strength steel}, volume={37}, ISSN={1543-1940}, url={http://dx.doi.org/10.1007/bf02586157}, DOI={10.1007/bf02586157}, number={11}, journal={Metallurgical and Materials Transactions A}, publisher={Springer Science and Business Media LLC}, author={Gan, Wei and Babu, S. S. and Kapustka, Nick and Wagoner, Robert H.}, year={2006}, month=nov, pages={3221–3231} }

JSON

{
  "indexed": {
    "date-parts": [
      [
        2025,
        8,
        6
      ]
    ],
    "date-time": "2025-08-06T13:38:17Z",
    "timestamp": 1754487497116
  },
  "reference-count": 64,
  "publisher": "Springer Science and Business Media LLC",
  "issue": "11",
  "license": [
    {
      "start": {
        "date-parts": [
          [
            2006,
            11,
            1
          ]
        ],
        "date-time": "2006-11-01T00:00:00Z",
        "timestamp": 1162339200000
      },
      "content-version": "tdm",
      "delay-in-days": 0,
      "URL": "https://www.springernature.com/gp/researchers/text-and-data-mining"
    },
    {
      "start": {
        "date-parts": [
          [
            2006,
            11,
            1
          ]
        ],
        "date-time": "2006-11-01T00:00:00Z",
        "timestamp": 1162339200000
      },
      "content-version": "vor",
      "delay-in-days": 0,
      "URL": "https://www.springernature.com/gp/researchers/text-and-data-mining"
    }
  ],
  "content-domain": {
    "domain": [],
    "crossmark-restriction": false
  },
  "published-print": {
    "date-parts": [
      [
        2006,
        11
      ]
    ]
  },
  "DOI": "10.1007/bf02586157",
  "type": "journal-article",
  "created": {
    "date-parts": [
      [
        2007,
        4,
        5
      ]
    ],
    "date-time": "2007-04-05T02:42:28Z",
    "timestamp": 1175740948000
  },
  "page": "3221-3231",
  "source": "Crossref",
  "is-referenced-by-count": 49,
  "title": "Microstructural effects on the springback of advanced high-strength steel",
  "prefix": "10.1007",
  "volume": "37",
  "author": [
    {
      "given": "Wei",
      "family": "Gan",
      "sequence": "first",
      "affiliation": []
    },
    {
      "given": "S. S.",
      "family": "Babu",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "Nick",
      "family": "Kapustka",
      "sequence": "additional",
      "affiliation": []
    },
    {
      "given": "Robert H.",
      "family": "Wagoner",
      "sequence": "additional",
      "affiliation": []
    }
  ],
  "member": "297",
  "reference": [
    {
      "issue": "7\u20138",
      "key": "BF02586157_CR1",
      "first-page": "69",
      "volume": "79",
      "author": "J. Chainer",
      "year": "2002",
      "unstructured": "J. Chainer:AISE Steel Technol., 2002, vol. 79 (7\u20138), pp. 69\u201373.",
      "journal-title": "AISE Steel Technol."
    },
    {
      "issue": "110",
      "key": "BF02586157_CR2",
      "first-page": "976",
      "volume": "5",
      "author": "J.R. Shaw",
      "year": "2001",
      "unstructured": "J.R. Shaw and B.K. Zuidema:J. Mater. Manuf., 2001, vol. 5 (110), pp. 976\u201383.",
      "journal-title": "J. Mater. Manuf."
    },
    {
      "issue": "1",
      "key": "BF02586157_CR3",
      "doi-asserted-by": "crossref",
      "first-page": "1",
      "DOI": "10.1179/cmq.2004.43.1.1",
      "volume": "43",
      "author": "T. Senuma",
      "year": "2004",
      "unstructured": "T. Senuma:Can. Metall. Q., 2004, vol. 43 (1), pp. 1\u201312.",
      "journal-title": "Can. Metall. Q."
    },
    {
      "key": "BF02586157_CR4",
      "unstructured": "R. Bode, M. Meurer, T.W. Schaumann, and W.W. Arnecke:Galvatech\u201904 Conf. Proc., reprinted by Association for Iron & Steel Technology, 2004, Warrendale, PA."
    },
    {
      "issue": "6",
      "key": "BF02586157_CR5",
      "doi-asserted-by": "crossref",
      "first-page": "520",
      "DOI": "10.2355/isijinternational.41.520",
      "volume": "41",
      "author": "T. Senuma",
      "year": "2001",
      "unstructured": "T. Senuma:Iron Steel Inst. Jpn. Int., 2001, vol. 41 (6), pp. 520\u201332.",
      "journal-title": "Iron Steel Inst. Jpn. Int."
    },
    {
      "key": "BF02586157_CR6",
      "doi-asserted-by": "crossref",
      "unstructured": "S. Keeler:Met. Forming, Apr. 2005, pp. 52\u201353.",
      "DOI": "10.1007/BF03251905"
    },
    {
      "issue": "8",
      "key": "BF02586157_CR7",
      "doi-asserted-by": "crossref",
      "first-page": "563",
      "DOI": "10.2355/tetsutohagane1955.86.8_563",
      "volume": "86",
      "author": "S.M. Song",
      "year": "2000",
      "unstructured": "S.M. Song, K. Sugimoto, M. Kobayashi, H. Matsubara, and T. Kashima:Tetsu-to-Hagane, 2000, vol. 86 (8), pp. 563\u201369.",
      "journal-title": "Tetsu-to-Hagane"
    },
    {
      "key": "BF02586157_CR8",
      "first-page": "2",
      "volume": "88",
      "author": "M. Takahashi",
      "year": "2003",
      "unstructured": "M. Takahashi:Nippon Steel Techn. Rep., 2003, vol. 88, pp. 2\u20137.",
      "journal-title": "Nippon Steel Techn. Rep."
    },
    {
      "key": "BF02586157_CR9",
      "unstructured": "International Iron and Steel Institute: Advanced High Strength Steel (AHSS) Application Guidelines, Mar. 2005, www.worldautosteel.org"
    },
    {
      "key": "BF02586157_CR10",
      "unstructured": "E. Pereloma:Mater. Austr., 2003, Nov.\u2013Dec., pp. 6\u20139."
    },
    {
      "key": "BF02586157_CR11",
      "unstructured": "L. Svensson and J.K. Larsson:6th Int. Trends in Welding Research Conf. Proc., 2002, pp. 787\u201392."
    },
    {
      "key": "BF02586157_CR12",
      "unstructured": "E. Biro and A. Lee:Sheet Metal Welding Conf. XI, 2004, Sterling Heights, MI."
    },
    {
      "key": "BF02586157_CR13",
      "unstructured": "C. Hsu, P. Soltis, D. Barton, and C. Occhialini:Sheet Metal Welding Conf. XI, Sterling Heights, MI, 2004."
    },
    {
      "key": "BF02586157_CR14",
      "unstructured": "C. Conrady and N. Kapustka:Sheet Metal Welding Conf. XII, Livonia, MI, May 9\u201312, 2006."
    },
    {
      "issue": "4",
      "key": "BF02586157_CR15",
      "doi-asserted-by": "publisher",
      "first-page": "1355",
      "DOI": "10.4028/www.scientific.net/MSF.426-432.1355",
      "volume": "426",
      "author": "S. Papaefthymiou",
      "year": "2003",
      "unstructured": "S. Papaefthymiou, W. Bleck, U. Prahl, C. Acht, J. Sietsma, and S. van der Zwaag:Mater. Sci. Forum, 2003, vol. 426 (4), pp. 1355\u201360.",
      "journal-title": "Mater. Sci. Forum"
    },
    {
      "key": "BF02586157_CR16",
      "unstructured": "B. H\u00f6gmanet al.:Verschlei\u00dfschutztechnik, Schopfheim, Germany, 2004."
    },
    {
      "key": "BF02586157_CR17",
      "unstructured": "G. Hartmann:Processing State of the Art Multiphase Steels, ACI Conf. Berlin, 2004."
    },
    {
      "key": "BF02586157_CR18",
      "unstructured": "B. Carlsson:3rd Int. Conf. Exhib. on Design and Production of Dies and Molds and 7th Int. Symp. on Advances in Abrasive Technology, Bursa, Turkey, June 17\u201319, 2004."
    },
    {
      "key": "BF02586157_CR19",
      "first-page": "1",
      "volume-title": "No. 175-76thNMS (Nishiyama Memorial Sem.)",
      "author": "Y. Kuriyama",
      "year": "2001",
      "unstructured": "Y. Kuriyama: No. 175-76thNMS (Nishiyama Memorial Sem.), ISIJ, Tokyo, Japan, 2001, p. 1."
    },
    {
      "issue": "6\u20137",
      "key": "BF02586157_CR20",
      "doi-asserted-by": "crossref",
      "first-page": "303",
      "DOI": "10.1002/srin.200200213",
      "volume": "73",
      "author": "E. Doege",
      "year": "2002",
      "unstructured": "E. Doege, S. Kulp, and C. Sunderkotter:Steel Res., 2002, vol. 73 (6\u20137), pp. 303\u201308.",
      "journal-title": "Steel Res."
    },
    {
      "issue": "3",
      "key": "BF02586157_CR21",
      "doi-asserted-by": "publisher",
      "first-page": "352",
      "DOI": "10.1016/j.jmatprotec.2005.04.095",
      "volume": "169",
      "author": "A. Andersson",
      "year": "2005",
      "unstructured": "A. Andersson:J. Mater. Proc. Technol., 2005, vol. 169 (3), pp. 352\u201356.",
      "journal-title": "J. Mater. Proc. Technol."
    },
    {
      "issue": "6\u20137",
      "key": "BF02586157_CR22",
      "doi-asserted-by": "crossref",
      "first-page": "309",
      "DOI": "10.1002/srin.200200214",
      "volume": "73",
      "author": "C. Greisert",
      "year": "2002",
      "unstructured": "C. Greisert and J. Wesemann:Steel Res., 2002, vol. 73 (6\u20137), pp. 309\u201313.",
      "journal-title": "Steel Res."
    },
    {
      "issue": "5",
      "key": "BF02586157_CR23",
      "doi-asserted-by": "publisher",
      "first-page": "946",
      "DOI": "10.2320/matertrans.44.946",
      "volume": "44",
      "author": "T. Ohwue",
      "year": "2003",
      "unstructured": "T. Ohwue, T. Yoshida, Y. Shirai, and T. Kikuma:Mater. Trans., 2003, vol. 44 (5), pp. 946\u201350.",
      "journal-title": "Mater. Trans."
    },
    {
      "issue": "3",
      "key": "BF02586157_CR24",
      "doi-asserted-by": "publisher",
      "first-page": "163",
      "DOI": "10.1007/s001700050053",
      "volume": "15",
      "author": "J.C. Lin",
      "year": "1999",
      "unstructured": "J.C. Lin and C.C. Tai:Int. J. Adv. Manuf. Technol., 1999, vol. 15 (3), pp. 163\u201370.",
      "journal-title": "Int. J. Adv. Manuf. Technol."
    },
    {
      "issue": "1\u20133",
      "key": "BF02586157_CR25",
      "doi-asserted-by": "publisher",
      "first-page": "9",
      "DOI": "10.1016/S0924-0136(96)02453-3",
      "volume": "66",
      "author": "D.K. Leu",
      "year": "1997",
      "unstructured": "D.K. Leu:J. Mater. Proc. Technol., 1997, vol. 66 (1\u20133), pp. 9\u201317.",
      "journal-title": "J. Mater. Proc. Technol."
    },
    {
      "key": "BF02586157_CR26",
      "volume-title": "Die Design Handbook",
      "author": "D.A. Smith",
      "year": "1990",
      "unstructured": "D.A. Smith:Die Design Handbook, 3rd ed., Society of Manufacturing Engineers, Dearborn, MI, 1990.",
      "edition": "3rd ed."
    },
    {
      "key": "BF02586157_CR27",
      "volume-title": "Principles and Methods of Sheet Metal Fabricating",
      "author": "G. Sachs",
      "year": "1951",
      "unstructured": "G. Sachs:Principles and Methods of Sheet Metal Fabricating, Reinhold Publishing Corp., New York, NY, 1951."
    },
    {
      "key": "BF02586157_CR28",
      "volume-title": "Die Design Handbook",
      "author": "F.W. Wilson",
      "year": "1955",
      "unstructured": "F.W. Wilson:Die Design Handbook, 1st ed., McGraw-Hill, Columbus, OH, 1955.",
      "edition": "1st ed."
    },
    {
      "key": "BF02586157_CR29",
      "doi-asserted-by": "crossref",
      "first-page": "44",
      "DOI": "10.1115/1.2899621",
      "volume": "113",
      "author": "R.D. Webb",
      "year": "1991",
      "unstructured": "R.D. Webb and D.E. Hardt:J. Eng. Indus.-Trans. ASME, 1991, vol. 113, pp. 44\u201352.",
      "journal-title": "J. Eng. Indus.-Trans. ASME"
    },
    {
      "key": "BF02586157_CR30",
      "doi-asserted-by": "publisher",
      "first-page": "38",
      "DOI": "10.1016/S0924-0136(99)00257-5",
      "volume": "99",
      "author": "C. Hindman",
      "year": "2000",
      "unstructured": "C. Hindman and K.B. Ousterhout:J. Mater. Proc. Technol., 2000, vol. 99, pp. 38\u201348.",
      "journal-title": "J. Mater. Proc. Technol."
    },
    {
      "key": "BF02586157_CR31",
      "doi-asserted-by": "publisher",
      "first-page": "113",
      "DOI": "10.1016/0020-7403(92)90077-T",
      "volume": "34",
      "author": "A.P. Karafillis",
      "year": "1992",
      "unstructured": "A.P. Karafillis and M.C. Boyce:Int. J. Mech. Sci., 1992, vol. 34, pp. 113\u201331.",
      "journal-title": "Int. J. Mech. Sci."
    },
    {
      "key": "BF02586157_CR32",
      "doi-asserted-by": "publisher",
      "first-page": "499",
      "DOI": "10.1016/0924-0136(92)90206-8",
      "volume": "32",
      "author": "A.P. Karafillis",
      "year": "1992",
      "unstructured": "A.P. Karafillis and M.C. Boyce:J. Mater. Proc. Technol., 1992, vol. 32, pp. 499\u2013508.",
      "journal-title": "J. Mater. Proc. Technol."
    },
    {
      "key": "BF02586157_CR33",
      "doi-asserted-by": "publisher",
      "first-page": "503",
      "DOI": "10.1016/0890-6955(95)00023-2",
      "volume": "36",
      "author": "A.P. Karafillis",
      "year": "1996",
      "unstructured": "A.P. Karafillis and M.C. Boyce:Int. J. Mach. Tools Manuf., 1996, vol. 36, pp. 503\u201326.",
      "journal-title": "Int. J. Mach. Tools Manuf."
    },
    {
      "issue": "7",
      "key": "BF02586157_CR34",
      "doi-asserted-by": "publisher",
      "first-page": "1097",
      "DOI": "10.1016/j.ijmecsci.2004.06.006",
      "volume": "46",
      "author": "W. Gan",
      "year": "2004",
      "unstructured": "W. Gan and R.H. Wagoner:Int. J. Mech. Sci., 2004, vol. 46 (7), pp. 1097\u2013113.",
      "journal-title": "Int. J. Mech. Sci."
    },
    {
      "issue": "4",
      "key": "BF02586157_CR35",
      "doi-asserted-by": "crossref",
      "first-page": "360",
      "DOI": "10.1115/1.1789955",
      "volume": "126",
      "author": "W. Gan",
      "year": "2004",
      "unstructured": "W. Gan, R.H. Wagoner, K. Mao, S. Price, and F. Rasouli:J. Mater. Proc. Technol., 2004, vol. 126 (4), pp. 360\u201367.",
      "journal-title": "J. Mater. Proc. Technol."
    },
    {
      "issue": "1",
      "key": "BF02586157_CR36",
      "doi-asserted-by": "publisher",
      "first-page": "115",
      "DOI": "10.1016/j.jmatprotec.2005.04.027",
      "volume": "169",
      "author": "R. Lingbeek",
      "year": "2005",
      "unstructured": "R. Lingbeek, J. Huetink, S. Ohnimus, M. Petzoldt, and J. Weiher:J. Mater. Proc. Technol., 2005, vol. 169 (1), pp. 115\u201325.",
      "journal-title": "J. Mater. Proc. Technol."
    },
    {
      "key": "BF02586157_CR37",
      "first-page": "1",
      "volume": "79",
      "author": "F.J. Gardiner",
      "year": "1957",
      "unstructured": "F.J. Gardiner:Trans. ASME, 1957, vol. 79, pp. 1\u20139.",
      "journal-title": "Trans. ASME"
    },
    {
      "key": "BF02586157_CR38",
      "first-page": "817",
      "volume": "65",
      "author": "W. Schroeder",
      "year": "1943",
      "unstructured": "W. Schroeder:Trans. ASME, 1943, vol. 65, pp. 817\u201327.",
      "journal-title": "Trans. ASME"
    },
    {
      "key": "BF02586157_CR39",
      "doi-asserted-by": "publisher",
      "first-page": "785",
      "DOI": "10.1016/S0924-0136(02)00393-X",
      "volume": "125",
      "author": "L. Papeleux",
      "year": "2002",
      "unstructured": "L. Papeleux and J.P. Ponthot:J. Mater. Proc. Technol., 2002, vol. 125, pp. 785\u201391.",
      "journal-title": "J. Mater. Proc. Technol."
    },
    {
      "key": "BF02586157_CR40",
      "unstructured": "L. Sanchez, R.D. Robertson, and J.C. Gerdeen: SAE Paper 960595, Society of Automotive Engineers, Warrendale, PA, 1996."
    },
    {
      "key": "BF02586157_CR41",
      "doi-asserted-by": "crossref",
      "first-page": "305",
      "DOI": "10.1115/1.4011077",
      "volume": "22",
      "author": "B.W. Shaffer",
      "year": "1955",
      "unstructured": "B.W. Shaffer and R.N. House, Jr.:ASME J. Appl. Mech., 1955, vol. 22, pp. 305\u201310.",
      "journal-title": "ASME J. Appl. Mech."
    },
    {
      "key": "BF02586157_CR42",
      "doi-asserted-by": "crossref",
      "first-page": "135",
      "DOI": "10.1007/BF02833692",
      "volume": "3",
      "author": "B.S. Levy",
      "year": "1984",
      "unstructured": "B.S. Levy:J. Appl. Metalworking, 1984, vol. 3, pp. 135\u201341.",
      "journal-title": "J. Appl. Metalworking"
    },
    {
      "key": "BF02586157_CR43",
      "doi-asserted-by": "publisher",
      "first-page": "123",
      "DOI": "10.1016/S0020-7403(01)00085-6",
      "volume": "44",
      "author": "L.M. Geng",
      "year": "2002",
      "unstructured": "L.M. Geng and R.H. Wagoner:Int. J. Mech. Sci., 2002, vol. 44, pp. 123\u201348.",
      "journal-title": "Int. J. Mech. Sci."
    },
    {
      "key": "BF02586157_CR44",
      "doi-asserted-by": "publisher",
      "first-page": "79",
      "DOI": "10.1016/S0020-7403(01)00082-0",
      "volume": "44",
      "author": "W.D. Carden",
      "year": "2002",
      "unstructured": "W.D. Carden, L.M. Geng, D.K. Matlock and R.H. Wagoner:Int. J. Mech. Sci., 2002, vol. 44, pp. 79\u2013101.",
      "journal-title": "Int. J. Mech. Sci."
    },
    {
      "key": "BF02586157_CR45",
      "doi-asserted-by": "publisher",
      "first-page": "103",
      "DOI": "10.1016/S0020-7403(01)00083-2",
      "volume": "44",
      "author": "K.P. Li",
      "year": "2002",
      "unstructured": "K.P. Li, W.D. Carden, and R.H. Wagoner:Int. J. Mech. Sci., 2002, vol. 44, pp. 103\u201322.",
      "journal-title": "Int. J. Mech. Sci."
    },
    {
      "key": "BF02586157_CR46",
      "first-page": "125",
      "volume-title": "Analysis of Autobody Stamping Technology",
      "author": "M. Huang",
      "year": "1994",
      "unstructured": "M. Huang and J.C. Gerdeen:Analysis of Autobody Stamping Technology, Society of Automotive Engineers, Warrendale, PA, 1994, 125\u201338."
    },
    {
      "issue": "1",
      "key": "BF02586157_CR47",
      "doi-asserted-by": "publisher",
      "first-page": "5",
      "DOI": "10.1016/0378-3804(82)90016-X",
      "volume": "6",
      "author": "T.X. Yu",
      "year": "1982",
      "unstructured": "T.X. Yu and W. Johnson:J. Mech. Working Technol., 1982, vol. 6 (1), pp. 5\u201321.",
      "journal-title": "J. Mech. Working Technol."
    },
    {
      "issue": "1",
      "key": "BF02586157_CR48",
      "doi-asserted-by": "publisher",
      "first-page": "60",
      "DOI": "10.1016/S0924-0136(98)00177-0",
      "volume": "80",
      "author": "S.W. Lee",
      "year": "1998",
      "unstructured": "S.W. Lee and D.Y. Yang:J. Mater. Proc. Technol., 1998, vol. 80 (1), pp. 60\u201367.",
      "journal-title": "J. Mater. Proc. Technol."
    },
    {
      "key": "BF02586157_CR49",
      "doi-asserted-by": "crossref",
      "unstructured": "W. Gan, P. Zhang, R.H. Wagoner, and G.S. Daehn:Int. J. Mater. Res. Adv. Technol., 2005, June, pp. 572\u2013577.",
      "DOI": "10.3139/146.101072"
    },
    {
      "key": "BF02586157_CR50",
      "doi-asserted-by": "crossref",
      "first-page": "2097",
      "DOI": "10.1007/BF02586130",
      "volume": "37A",
      "author": "W. Gan",
      "year": "2006",
      "unstructured": "W. Gan, P. Zhang, R.H. Wagoner, and G.S. Daehn:Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2097\u2013106.",
      "journal-title": "Metall. Mater. Trans. A"
    },
    {
      "issue": "2",
      "key": "BF02586157_CR51",
      "doi-asserted-by": "publisher",
      "first-page": "789",
      "DOI": "10.1016/1359-6454(95)00209-X",
      "volume": "44",
      "author": "D.F. Watt",
      "year": "1996",
      "unstructured": "D.F. Watt, X.Q. Xu, and D.J. Lloyd:Acta Mater., 1996, vol. 44 (2), pp. 789\u201399.",
      "journal-title": "Acta Mater."
    },
    {
      "issue": "4",
      "key": "BF02586157_CR52",
      "doi-asserted-by": "publisher",
      "first-page": "1701",
      "DOI": "10.1016/0956-7151(94)00346-J",
      "volume": "43",
      "author": "Y.L. Shen",
      "year": "1995",
      "unstructured": "Y.L. Shenet al.:Acta Metall. Mater., 1995, vol. 43 (4), pp. 1701\u201322.",
      "journal-title": "Acta Metall. Mater."
    },
    {
      "issue": "12",
      "key": "BF02586157_CR53",
      "doi-asserted-by": "publisher",
      "first-page": "2143",
      "DOI": "10.1016/j.ijplas.2004.04.007",
      "volume": "20",
      "author": "M. Ekh",
      "year": "2004",
      "unstructured": "M. Ekh, R. Lillbacka, and K. Runesson:Int. J. Plast., 2004, vol. 20 (12), pp. 2143\u201359.",
      "journal-title": "Int. J. Plast."
    },
    {
      "issue": "2",
      "key": "BF02586157_CR54",
      "doi-asserted-by": "publisher",
      "first-page": "273",
      "DOI": "10.1016/S0364-5916(02)00037-8",
      "volume": "26",
      "author": "J.O. Andersson",
      "year": "2002",
      "unstructured": "J.O. Andersson, T. Helander, L.H. Hoglundet al.:CALPHAD, 2002, vol. 26 (2), pp. 273\u2013312.",
      "journal-title": "CALPHAD"
    },
    {
      "key": "BF02586157_CR55",
      "doi-asserted-by": "publisher",
      "first-page": "747",
      "DOI": "10.1088/0370-1301/64/9/303",
      "volume": "64",
      "author": "E.O. Hall",
      "year": "1951",
      "unstructured": "E.O. Hall:Proc. Phys. Soc., Ser. B, 1951, vol. 64, pp. 747\u201353.",
      "journal-title": "Proc. Phys. Soc., Ser. B"
    },
    {
      "key": "BF02586157_CR56",
      "unstructured": "N.J. Petch:J. Iron Steel Inst., 1953, May, pp. 25\u201328."
    },
    {
      "key": "BF02586157_CR57",
      "doi-asserted-by": "publisher",
      "first-page": "441",
      "DOI": "10.1016/0921-5093(89)90331-6",
      "volume": "113",
      "author": "E.F. Rauch",
      "year": "1989",
      "unstructured": "E.F. Rauch and J.H. Schmitt:Mater. Sci. Eng. A, 1989, vol. 113, pp. 441\u201348.",
      "journal-title": "Mater. Sci. Eng. A"
    },
    {
      "issue": "11",
      "key": "BF02586157_CR58",
      "doi-asserted-by": "publisher",
      "first-page": "2985",
      "DOI": "10.1016/S1359-6454(00)00082-3",
      "volume": "48",
      "author": "D.A. Hughes",
      "year": "2000",
      "unstructured": "D.A. Hughes and N. Hansen:Acta Mater., 2000, vol. 48 (11), pp. 2985\u20133004.",
      "journal-title": "Acta Mater."
    },
    {
      "key": "BF02586157_CR59",
      "unstructured": "Abaqus/Standard User\u2019s Manual 6.5, ABAQUS, Inc., Providence, RI, 2004."
    },
    {
      "issue": "5\u20136",
      "key": "BF02586157_CR60",
      "doi-asserted-by": "publisher",
      "first-page": "1287",
      "DOI": "10.1016/j.ijsolstr.2004.08.017",
      "volume": "42",
      "author": "J.F. Wang",
      "year": "2005",
      "unstructured": "J.F. Wang, R.H. Wagoner, D.K. Matlock, and F. Barlat:Int. J. Solids Struct., 2005, vol. 42 (5\u20136), pp. 1287\u20131307.",
      "journal-title": "Int. J. Solids Struct."
    },
    {
      "issue": "12",
      "key": "BF02586157_CR61",
      "doi-asserted-by": "publisher",
      "first-page": "2209",
      "DOI": "10.1016/j.ijplas.2004.05.008",
      "volume": "20",
      "author": "J.F. Wang",
      "year": "2004",
      "unstructured": "J.F. Wang, R.H. Wagoner, D.K. Matlock, W.D. Carden, D.K. Matlock, and F. Barlat:Int. J. Plas., 2004, vol. 20 (12), pp. 2209\u201332.",
      "journal-title": "Int. J. Plas."
    },
    {
      "issue": "1\u20134",
      "key": "BF02586157_CR62",
      "doi-asserted-by": "publisher",
      "first-page": "158",
      "DOI": "10.1016/S0927-0256(99)00058-0",
      "volume": "16",
      "author": "S. Bugat",
      "year": "1999",
      "unstructured": "S. Bugat, J. Besson, and A. Pineau:Comp. Mater. Sci., 1999, vol. 16 (1\u20134), pp. 158\u201366.",
      "journal-title": "Comp. Mater. Sci."
    },
    {
      "issue": "6",
      "key": "BF02586157_CR63",
      "doi-asserted-by": "crossref",
      "first-page": "1543",
      "DOI": "10.1007/s11661-000-0165-4",
      "volume": "31",
      "author": "P. Dawson",
      "year": "2000",
      "unstructured": "P. Dawson, D. Boyce, S. MacEwen, and R. Rogge:Metall. Mater. Trans. A., 2000, vol. 31 (6), pp. 1543\u201355.",
      "journal-title": "Metall. Mater. Trans. A."
    },
    {
      "key": "BF02586157_CR64",
      "first-page": "91s",
      "volume": "80",
      "author": "S.S. Babu",
      "year": "2001",
      "unstructured": "S.S. Babu, S.A. David, and M. Quintana:Welding J., 2001, vol. 80, pp. 91s-97s.",
      "journal-title": "Welding J."
    }
  ],
  "container-title": "Metallurgical and Materials Transactions A",
  "original-title": [],
  "language": "en",
  "link": [
    {
      "URL": "https://link.springer.com/content/pdf/10.1007/BF02586157.pdf",
      "content-type": "application/pdf",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "https://link.springer.com/article/10.1007/BF02586157/fulltext.html",
      "content-type": "text/html",
      "content-version": "vor",
      "intended-application": "text-mining"
    },
    {
      "URL": "http://link.springer.com/content/pdf/10.1007/BF02586157",
      "content-type": "unspecified",
      "content-version": "vor",
      "intended-application": "similarity-checking"
    },
    {
      "URL": "https://link.springer.com/content/pdf/10.1007/BF02586157.pdf",
      "content-type": "application/pdf",
      "content-version": "vor",
      "intended-application": "similarity-checking"
    }
  ],
  "deposited": {
    "date-parts": [
      [
        2024,
        2,
        12
      ]
    ],
    "date-time": "2024-02-12T19:34:16Z",
    "timestamp": 1707766456000
  },
  "score": 1,
  "resource": {
    "primary": {
      "URL": "https://link.springer.com/10.1007/BF02586157"
    }
  },
  "subtitle": [],
  "short-title": [],
  "issued": {
    "date-parts": [
      [
        2006,
        11
      ]
    ]
  },
  "references-count": 64,
  "journal-issue": {
    "issue": "11",
    "published-print": {
      "date-parts": [
        [
          2006,
          11
        ]
      ]
    }
  },
  "alternative-id": [
    "BF02586157"
  ],
  "URL": "http://dx.doi.org/10.1007/BF02586157",
  "relation": {},
  "ISSN": [
    "1073-5623",
    "1543-1940"
  ],
  "subject": [],
  "container-title-short": "Metall Mater Trans A",
  "published": {
    "date-parts": [
      [
        2006,
        11
      ]
    ]
  }
}