Crossref journal-article
Springer Science and Business Media LLC
Experimental Mechanics (297)
Bibliography

Song, B., & Chen, W. (2004). Dynamic stress equilibration in split Hopkinson pressure bar tests on soft materials. Experimental Mechanics, 44(3), 300–312.

Authors 2
  1. B. Song (first)
  2. W. Chen (additional)
References 29 Referenced 172
  1. Kolsky, H., “An Investigation of the Mechanical Properties of Materials at Very High Rates of Loading,” Proc. Phys. Soc. B.,62, 676–700 (1949). (10.1088/0370-1301/62/11/302) / Proc. Phys. Soc. B. by H. Kolsky (1949)
  2. Gray, G.T., “Classic Split-Hopkinson Pressure Bar Testing,” Mechanical Testing and Evaluation Handbook, Vol. 8, American Society for Metals, Materials Park, OH, 488–496 (2000). / Classic Split-Hopkinson Pressure Bar Testing / Mechanical Testing and Evaluation Handbook by G.T. Gray (2000)
  3. Ross, C.A., Jerome, D.M., Tedesco, J.W., and Hughes, M.L., “Moisture and Strain Rate Effects on Concrete Strength,” ACI Mater. J.,93, 293–300 (1996). / ACI Mater. J. by C.A. Ross (1996)
  4. Chen, W. and Ravichandran, G., “Static and Dynamic Compressive Behavior of Aluminum Nitride Under Moderate Confinement,” J. Am. Ceram. Soc.,79, 579–584 (1996). (10.1111/j.1151-2916.1996.tb07913.x) / J. Am. Ceram. Soc. by W. Chen (1996)
  5. Chen, W. and Ravichandran, G., “Dynamic Compressive Behavior of a Glass Ceramic under Lateral Confinement,” J. Mech. Phys. Solids,45, 1303–1328 (1997). (10.1016/S0022-5096(97)00006-9) / J. Mech. Phys. Solids by W. Chen (1997)
  6. Chen, W. and Ravichandran, G., “Failure Mode Transition in Ceramics under Dynamic Multiaxial Compression,” Int. J. Fract.,101, 141–159 (2000). (10.1023/A:1007672422700) / Int. J. Fract. by W. Chen (2000)
  7. Ninan, L., Tsai, J., and Sun, C.T., “Use of Split Hopkinson Pressure Bar for Testing Off-Axis Composites,” Int. J. Impact Eng.,25, 291–313 (2001). (10.1016/S0734-743X(00)00039-7) / Int. J. Impact Eng. by L. Ninan (2001)
  8. Chen, W., Zhang, B., and Forrestal, M.J., “A Split Hopkinson Bar Technique for Low-Impedance Materials,” EXPERIMENTAL MECHANICS,39, 81–85 (1999). (10.1007/BF02331109) / Experimental Mechanics by W. Chen (1999)
  9. Gamby, D. and Chaoufi, J., “Asymptotic Analysis of Wave Propagation in a Finite Viscoplastic Bar,” Acta Mech.,87, 163–178 (1991). (10.1007/BF01299793) / Acta Mech. by D. Gamby (1991)
  10. Zhao, H., Gary, G., and Klepaczko, J.R., “On the Use of a Viscoelastic Split Hopkinson Pressure Bar,” Int. J. Impact Eng.,19, 319–330 (1997). (10.1016/S0734-743X(96)00038-3) / Int. J. Impact Eng. by H. Zhao (1997)
  11. Sawas, O., Brar, N.S., and Brockman, R.A., “Dynamic Characterization of Compliant Materials Using an All-Polymeric Split Hopkinson Bar,” EXPERIMENTAL MECHANICS,38, 204–210 (1998). (10.1007/BF02325744) / Experimental Mechanics by O. Sawas (1998)
  12. Frew, D.J., Forrestal, M.J., and Chen, W., “A Split Hopkinson Bar Technique to Determine Compressive Stress-Strain Data for Rock Materials,” EXPERIMENTAL MECHANICS,41, 40–46 (2001). (10.1007/BF02323102) / Experimental Mechanics by D.J. Frew (2001)
  13. Follansbee, P.S. and Frantz, C., “Wave Propagation in the SHPB”, Trans. ASME, J. Eng. Mater. Technol.,105, 61–66 (1983). (10.1115/1.3225620) / Trans. ASME, J. Eng. Mater. Technol. by P.S. Follansbee (1983)
  14. Gong, J.C., Malvern, L.E., and Jenkins, D.A., “Dispersion Investigation in the Split Hopkinson Pressure Bar,” Trans. ASME. J. Eng. Mater. Technol.,112 309–314 (1990). (10.1115/1.2903329) / Trans. ASME. J. Eng. Mater. Technol. by J.C. Gong (1990)
  15. Gary, G., Klepaczko, J.R. and Zhao, H., “Corrections for Wave Dispersion and Analysis of Small Strains with Split Hopkinson Bar,” Proceedings of the International Symposium of Impact Engineering, Sendai, Japan, 73–78 (1992).
  16. Lifshitz, J.M. and Leber, H., “Data Processing in the Split Hopkinson Pressure Bar Tests,” Int. J. Impact Eng.,15, 723–733 (1994). (10.1016/0734-743X(94)90011-9) / Int. J. Impact Eng. by J.M. Lifshitz (1994)
  17. Bacon, C., “An Experimental Method for Considering Dispersion and Attenuation in a Viscoelastic Hopkinson Bar,” EXPERIMENTAL MECHANICS,38, 242–249 (1998). (10.1007/BF02410385) / Experimental Mechanics by C. Bacon (1998)
  18. Chen, W., Lu, F., and Zhou, B., “A Quartz Crystal Embedded Split Hopkinson Bar for Soft Materials,” EXPERIMENTAL MECHANICS,40, 1–6 (2000). (10.1007/BF02327540) / Experimental Mechanics by W. Chen (2000)
  19. Chen, W., Lu, F., Frew, D.J., and Forestal, M.J. “Dynamic Compression Testing of Soft Materials” Trans. ASME. J. App. Mech.,69, 214–223 (2002). (10.1115/1.1464871) / Trans. ASME. J. App. Mech. by W. Chen (2002)
  20. Lindholm, U.S., “Some Experiments with the Split Hopkinson Pressure Bar,” J. Mech. Phys. Solids,12, 317–335 (1964). (10.1016/0022-5096(64)90028-6) / J. Mech. Phys. Solids by U.S. Lindholm (1964)
  21. Gray, G.T., III, Blumenthal, W.R., Trujillo, C.P., and Carpenter, R.W., II, “Influence of Temperature and Strain Rate on the Mechanical Behavior of Adiprene L-100,” J. Phys. IV France Colloq. C3 (DYMAT 97),7, 523–528 (1997). / J. Phys. IV France Colloq. C3 (DYMAT 97) by G.T. Gray III (1997)
  22. Gray, G.T. and Blumenthal, W.R., “Split-Hopkinson Pressure Bar Testing of Soft Materials,” Mechanical Testing and Evaluation Handbook, Vol 8, American Society for Metals, Materials Park, OH, 488–496 (2000). / Split-Hopkinson Pressure Bar Testing of Soft Materials / Mechanical Testing and Evaluation Handbook by G.T. Gray (2000)
  23. Dioh, N.N., Leevers, P.S., and Williams, J.G., “Thickness Effects in Split Hopkinson Pressure Bar Tests, Polymer,34, 4230–4234 (1993). (10.1016/0032-3861(93)90181-9) / Polymer by N.N. Dioh (1993)
  24. Wu, X.J. and Gorham, D.A. “Stress Equilibrium in the Split Hopkinson Pressure Bar Test” J. Phys. IV France Colloq. C3 (DYMAT 97),7, 91–96 (1997). / J. Phys. IV France Colloq. C3 (DYMAT 97) by X.J. Wu (1997)
  25. Valpey-Fisher Corp., The User's Guide to Ultrasound Products, 75 South St., Hopkinton, MA 01748, USA (1994).
  26. Chen, W., Subhash, G., and Ravichandran, G., “Evaluation of Ceramic Speciment Geometries Used in Split Hopkinson Pressure Bar,” DYMAT J.,1, 193–210 (1994). / Dymat J. by W. Chen (1994)
  27. Ravichandran, G. and Subhash, G., “Critical Appraisal of Limiting Strain Rates for Compression Testing of Ceramics in a Split Hopkinson Pressure Bar,” J. Am. Cerain. Soc.,77, 263–267 (1994). (10.1111/j.1151-2916.1994.tb06987.x) / J. Am. Cerain. Soc. by G. Ravichandran (1994)
  28. Meyers, M. A., Dynamic Behavior of Materials, Wiley New York (1994). (10.1002/9780470172278) / Dynamic Behavior of Materials by M. A. Meyers (1994)
  29. Lakes, R.S., Viscoelastic Solids, CRC Press New York (1999). / Viscoelastic Solids by R.S. Lakes (1999)
Dates
Type When
Created 19 years, 2 months ago (June 1, 2006, 2:17 p.m.)
Deposited 6 years, 3 months ago (May 17, 2019, 1:10 p.m.)
Indexed 45 minutes ago (Aug. 29, 2025, 3:08 p.m.)
Issued 21 years, 2 months ago (June 1, 2004)
Published 21 years, 2 months ago (June 1, 2004)
Published Print 21 years, 2 months ago (June 1, 2004)
Funders 0

None

@article{Song_2004, title={Dynamic stress equilibration in split Hopkinson pressure bar tests on soft materials}, volume={44}, ISSN={1741-2765}, url={http://dx.doi.org/10.1007/bf02427897}, DOI={10.1007/bf02427897}, number={3}, journal={Experimental Mechanics}, publisher={Springer Science and Business Media LLC}, author={Song, B. and Chen, W.}, year={2004}, month=jun, pages={300–312} }