10.1007/978-1-4899-3599-1_2
Crossref book-chapter
Springer US
Liquid Phase Sintering (297)
Bibliography

German, R. M. (1985). Microstructures. Liquid Phase Sintering, 13–41.

Authors 1
  1. Randall M. German (first)
References 40 Referenced 5
  1. C. H. Kang and D. N. Yoon, “Coarsening of Cobalt Grains Dispersed in Liquid Copper Matrix,” Metall. Trans. A, 1981, vol. 12A, pp. 65–69. (10.1007/BF02648509) / Metall. Trans. A by CH Kang (1981)
  2. S. S. Kang and D. N. Yoon, “Kinetics of Grain Coarsening During Sintering of Co-Cu and Fe-Cu Alloys with Low Liquid Contents,” Metall. Trans. A, 1982, vol. 13A, pp. 1405–1411. (10.1007/BF02642878) / Metall. Trans. A by SS Kang (1982)
  3. J. P. Hirth and J. Lothe, Theory of Dislocations, McGraw-Hill, New York, NY, 1968, p.673. / Theory of Dislocations by JP Hirth (1968)
  4. O. K. Riegger and L. H. Van Vlack, “Dihedral Angle Measurement,” Trans. TMS-AIME, 1960, vol. 218, pp. 933–935. / Trans. TMS-AIME by OK Riegger (1960)
  5. I.A. Aksay, C. E. Hoge, and J. A. Pask, “Phase Distribution in Solid-Liquid-Vapor Systems,” Surfaces and Interfaces of Class and Ceramics, V. D. Frechette, W. C. Lacourse and V. L. Burdick (eds.), Plenum Press, New York, NY, 1974, pp. 299–321. (10.1007/978-1-4684-3144-5_17) / Surfaces and Interfaces of Class and Ceramics by IA Aksay (1974)
  6. H. Riegger, J. A. Pask, and H. E. Exner, “Direct Observation of Densification and Grain Growth in a W-Ni Alloy,” Sintering Processes, G. C. Kuczynski (ed.), Plenum Press, New York, NY, 1980, pp. 219–233. (10.1007/978-1-4899-5301-8_19) / Sintering Processes by H Riegger (1980)
  7. R. Warren and M. B. Waldron, “Microstructural Development During the Liquid-Phase Sintering of Cemented Carbides I. Wettability and Grain Contact,” Powder Met., 1972, vol. 15, pp. 166–180. (10.1179/pom.1972.15.30.005) / Powder Met. by R Warren (1972)
  8. T. H. Courtney, “Densification and Structural Development in Liquid Phase Sintering,” Metall. Trans. A, 1984, voI.15A, pp. 1065–1074. (10.1007/BF02644699) / Metall. Trans. A by TH Courtney (1984)
  9. E. E. Underwood, Quantitative Stereology, Addison-Wesley, Reading, MA, 1970. / Quantitative Stereology by EE Underwood (1970)
  10. R. L. Fullman, “Measurement of Particle Size in Opaque Bodies,” Trans. TMS-AIME, 1953, vol. 197, pp. 447–452. / Trans. TMS-AIME by RL Fullman (1953)
  11. O. J. Kwon and D. N. Yoon, “The Liquid Phase Sintering of W-Ni,” Sintering Processes, G. C. Kuczynski (ed.), Plenum Press, New York, NY, 1980, pp. 203–218. (10.1007/978-1-4899-5301-8_18) / Sintering Processes by OJ Kwon (1980)
  12. O. J. Kwon and D. N. Yoon, “Closure of Isolated Pores in Liquid Phase Sintering of W-Ni,” Inter. J. Powder Met. Powder Tech., 1981, vol. 17, pp. 127–133. / Inter. J. Powder Met. Powder Tech. by OJ Kwon (1981)
  13. H. H. Park, S. J. Cho, and D. N. Yoon, “Pore Filling Process in Liquid Phase Sintering,” Metall. Trans. A, 1984, vol. 15A, pp. 1075–1080. (10.1007/BF02644700) / Metall. Trans. A by HH Park (1984)
  14. R. M. German and K. S. Churn, “Sintering Atmosphere Effects on the Ductility of W-Ni-Fe Heavy Metals,” Metall. Trans. A, 1984, vol. 15A, pp. 747–754. (10.1007/BF02644206) / Metall. Trans. A by RM German (1984)
  15. D. Kellam and P. S. Nicholson, “Pore Shape Changes During the Initial Stages of Sintering,” J. Amer. Ceramic Soc., 1971, vol. 54, pp. 127–128. (10.1111/j.1151-2916.1971.tb12236.x) / J. Amer. Ceramic Soc. by D Kellam (1971)
  16. R. M. German, “The Direct Observation of Open Porosity Networks,” Metallog., 1972, vol. 5, pp. 462–465. (10.1016/0026-0800(72)90035-3) / Metallog. by RM German (1972)
  17. T. K. Kang and D. N. Yoon, “Coarsening of Tungsten Grains in Liquid Nickel-Tungsten Matrix,” Metall. Trans. A, 1978, vol. 9A, pp. 433–438. (10.1007/BF02646395) / Metall. Trans. A by TK Kang (1978)
  18. W. Beere, “A Unifying Theory of the Stability of Penetrating Liquid Phases and Sintering Pores,” Acta Met., 1975, vol. 23, pp. 131–138. (10.1016/0001-6160(75)90078-4) / Acta Met. by W Beere (1975)
  19. H. H. Park and D. N. Yoon, “Effect of Dihedral Angle on the Morphology of Grains in a Matrix Phase”, Metall. Trans. A, 1985, vol. 16A, pp. 923–928. (10.1007/BF02814844) / Metall. Trans. A by HH Park (1985)
  20. P. J. Wray, “The Geometry of Two-Phase Aggregates in which the Shape of the Second Phase is Determined by its Dihedral Angle,” Acta Met., 1976, vol. 24, pp. 125–135. (10.1016/0001-6160(76)90015-8) / Acta Met. by PJ Wray (1976)
  21. R. Raj, “Morphology and Stability of the Glass Phase in Glass-Ceramic Systems,” J. Amer. Ceramic Soc, 1981, vol. 64, pp. 245–248. (10.1111/j.1151-2916.1981.tb09596.x) / J. Amer. Ceramic Soc by R Raj (1981)
  22. S. Sarin and H. W. Weart, “Factors Affecting the Morphology of an Array of Solid Particles in a Liquid Matrix,” Trans. TMS-AIME, 1965, vol. 233, pp. 1990–1994. / Trans. TMS-AIME by S Sarin (1965)
  23. L. Murr, Interfacial Phenomena in Metals and Alloys, Addison-Wesley, Reading, MA, 1975, pp. 3–6. / Interfacial Phenomena in Metals and Alloys by L Murr (1975)
  24. R. Warren, “Microstructural Development During the Liquid-Phase Sintering of Two-Phase Alloys with Special Reference to the NbC/Co System,” J. Mater. Sci., 1968, vol. 3, pp. 471–485. (10.1007/BF00549730) / J. Mater. Sci. by R Warren (1968)
  25. C. K. L. Davies, P. Nash, and R. N. Stevens, “The Effect of Volume Fraction of Precipitate on Ostwald Ripening,” Acta Metall., 1980, vol. 28, pp. 179–189. (10.1016/0001-6160(80)90067-X) / Acta Metall. by CKL Davies (1980)
  26. E. E. Underwood, “Quantitative Stereoiogy for Microstructural Analysis,” Microstructural Analysis, J. L. McCall and W. M. Mueller (eds.), Plenum Press, New York, NY, 1973, pp. 35–66. (10.1007/978-1-4615-8693-7_3) / Microstructural Analysis by EE Underwood (1973)
  27. R. M. German, “The Contiguity of Liquid Phase Sintered Microstructures,” Metall. Trans. A, 1985, vol. 16A, pp. 1247–1252. (10.1007/BF02670329) / Metall. Trans. A by RM German (1985)
  28. T. H. Courtney, “Microstructural Evolution During Liquid Phase Sintering: Part I. Development of Microstructure,” Metall. Trans. A, 1977, Vol.8A, pp. 679–684. (10.1007/BF02664776) / Metall. Trans. A by TH Courtney (1977)
  29. T. H. Courtney, “Microstructural Evolution During Liquid Phase Sintering: Part II. Microstructural Coarsening,” Metall. Trans. A, 1977, Vol.8A, pp. 685–689. (10.1007/BF02664777) / Metall. Trans. A by TH Courtney (1977)
  30. J. Gurland, “An Estimate of Contact and Continuity of Dispersions in Opaque Samples,” Trans. TMS-AIME, 1966, vol. 236, pp. 642–646. / Trans. TMS-AIME by J Gurland (1966)
  31. A. N. Prabhu and R. W. Vest, “Investigation of Microstructure Development in Ruthenium Oxide — Lead Borosilicate Glass Thick Films,” Sintering and Catalysis, G. C. Kuczynski (ed.), Plenum Press, New York, NY, 1975, pp. 399–408. (10.1007/978-1-4684-0934-5_30) / Sintering and Catalysis by AN Prabhu (1975)
  32. F. B. Swinkels and M. F. Ashby, “A Second Report on Sintering Diagrams,” Acta Met., 1981, vol. 29, pp. 259–281. (10.1016/0001-6160(81)90154-1) / Acta Met. by FB Swinkels (1981)
  33. J. P. Jernot, J. L. Chermant, and M. Coster, “The Mean Free Path in the Porous Phase of Sintered Materials,” Powder Tech., 1981, vol. 30, pp. 31–35. (10.1016/0032-5910(81)85024-3) / Powder Tech. by JP Jernot (1981)
  34. R. M. German and Z. A. Munir, “Morphology Relations During Surface-Transport Controlled Sintering,” Metall. Trans. B, 1975, vol. 6B, pp. 289–294. (10.1007/BF02913572) / Metall. Trans. B by RM German (1975)
  35. S. Prochazka and R. L. Coble, “Surface Diffusion in the Initial Sintering of Alumina. Part I — Model Considerations,” Sci. Sintering, 1970, vol. 2, pp. 1–18. / Sci. Sintering by S Prochazka (1970)
  36. H. F. Fischmeister and E. Arzt, “Densification of Powders by Particle Deformation,” Powder Met., 1983, vol. 26, pp. 82–88. / Met. by HF Fischmeister (1983)
  37. A. N. Niemi, L. E. Baxa, J. K. Lee, and T. H. Courtney, “Coalescence Phenomena in Liquid Phase Sintering — Conditions and Effects on Microstructure,” Modern Developments in Powder Metallurgy, vol. 12, H. H. Hausner, H. W. Antes, and G. D. Smith (eds.), Metal Powder Industries Federation, Princeton, NJ, 1981, pp. 483–495. / Modern Developments in Powder Metallurgy by AN Niemi (1981)
  38. G. Grathwohl and R. Warren, “The Effect of Cobalt Content on the Microstructure of Liquid-Phase Sintered TaC-Co Alloys,” Mater. Sci. Eng., 1974, vol. 14, pp. 55–65. (10.1016/0025-5416(74)90123-2) / Mater. Sci. Eng. by G Grathwohl (1974)
  39. I. M. Stephenson and J. White, “Factors Controlling Microstructure and Grain Growth in Two-Phase and in Three-Phase Systems,” Trans. Brit. Ceramic Soc., 1967, vol. 66, pp. 443–483. / Trans. Brit. Ceramic Soc. by IM Stephenson (1967)
  40. R. V. Makarova, O. K. Teodorovich, and I. N. Frantsevich, “The Coalescence Phenomenon in Liquid Phase Sintering in the Systems Tungsten-Nickel-Iron and Tungsten-Nickel-Copper,” Soviet Powder Met. Metal Ceram., 1965, vol. 4, pp. 554–559. (10.1007/BF00774258) / Soviet Powder Met. Metal Ceram. by RV Makarova (1965)
Dates
Type When
Created 11 years, 8 months ago (Dec. 9, 2013, 3:55 a.m.)
Deposited 3 years, 5 months ago (March 19, 2022, 3:40 a.m.)
Indexed 11 months, 3 weeks ago (Sept. 7, 2024, 10:40 p.m.)
Issued 40 years, 7 months ago (Jan. 1, 1985)
Published 40 years, 7 months ago (Jan. 1, 1985)
Published Print 40 years, 7 months ago (Jan. 1, 1985)
Funders 0

None

@inbook{German_1985, title={Microstructures}, ISBN={9781489935991}, url={http://dx.doi.org/10.1007/978-1-4899-3599-1_2}, DOI={10.1007/978-1-4899-3599-1_2}, booktitle={Liquid Phase Sintering}, publisher={Springer US}, author={German, Randall M.}, year={1985}, pages={13–41} }